PXI-5114 can hold in the SMU 1085 chassis

Similar Questions

• How can I change the type of chassis in an existing CompactRIO project?

  Hello

  I have a built in LabView 8.2 for a chassis 9101 cRIO. Now, I want to bring to LabView 2009 and use it on a chassis of 9104. I would have thought this should be simple, but there is a VI on the FPGA itself. When you compile, I get the error "the device type that has been set up in this function does not match the actual type of the device. I don't want to have to remove the frame of the project & add it back (losing all the settings it can have) - is there a way just to change the type of target, but keeping the relevant parameters?

  Thanks for any help!

  Dave

  Hi Dave,.

  Once you've practiced it several times it is actually a piece of cake.

  Right click on the project select new target or device

  Rember just to specify rather than the current goal.

  Otherwise, you will have a conflict.

  The new target is initialized to the Ip (0,0,0,0) then re address assignment standard.

  Copy (drag) all the components for the new device (RT & FPGA if included)

  Note it's manual labor rather than you have to 'say' labview what material he must understand!

  concerning

  Xseadog

• Impossible to compile of the SMU-8101 Code

  Hello

  My system is an SMU-1065 chassis (I also had the same problem in the SMU-1082 chassis), SMU-8101 controller with Windows 7 installed by OR and the following instruments:

  DMM PXI-4071, power supply PXI-4110, DAQ SMU-6356, calendar card SMU-6674 t and Motion Control PXI-7332.

  I also have a SMU-8361 which I use from time to time and will be what I use in the long term.

  Now for the real problem. What happens is I put all code in labview by using the instrument of VI driver and everything works perfectly. I can do VI calling Subvi appeal VI instrument and it works fine, but if I double click on a VI instruments and then try to watch the block schema, for example, opening 'DAQmx create channel (I-voltage-Basic) .vi' it seems to break the code. At first he said nothing but once I hit the button the arrow will change to the broken gray arrow and claim that the code could not compile (this is without actually changing anything with VI, I open it and look what he did).

  Also any code I wrote called VI now get the same error if I click display error it will bring up a window I was looking for, so if I was watching the façade, then clicked on see the error it would bring just to the top of the front again without bringing out something. If I create a new file and build a little vi using instrument drivers, it works very well, if I copy the vi of the broken code and paste it into the new file it will fail with the same error.

  It is not to have this behavior with all the instrument of VI, but will happen with some. I mentioned, it comes up with 'DAQmx create channel (I-voltage-Basic) .vi' but then this does not happen with "DAQmx Timing(Sample_Clock).vi. I have not experienced and verified exactly what VI he comes up with, but it seems to happen with other drivers of instruments as well, not only for the acquisition of data. It seems also that occur when you use the SMU-8101. If I connect it to a computer this is not pop up. My business control primarily the chassis using MXI cards so we have no embedded controllers available that I could swap in to see if it still happens.

  It's not a big problem, glancing in the instrument vi is not necessary for me to do my job, I just do it to try to better understand what exactly is happening, but it's something I'm curious about.

  Hi arielm,.

  Have you tried to repair or uninstall/reinstall DAQmx? You can find the latest version here: http://www.ni.com/download/ni-daqmx-9.9/4707/en/

• How can I change the display of Web sites

  How can I change the size of the fonts/display of websites when using Firefox as my browser?

  The most reliable way to do everything more or less is to use the Firefox zoom feature. If you hold down the Ctrl key with your left hand and press on the + and - keys with your right hand you can see this in action. Or you can hold down the Ctrl key and scroll the mouse wheel. To restore the default level, hold the CTRL and press 0 (zero).

  If you find that you need to zoom in each site, you can use an add-on to set your preferred default zoom level. Here are two that have been around for a while:

  • Default FullZoom Level
  • NoSquint

  After setting your overall zoom level, you can still adjust the zoom on various sites using the standard Firefox zoom feature.

  Now... who could not all changes you want to see addressed. Could you explain more in detail everything that needs fixing?

• Can I put the Pavilion Slimline 180 Watt power supply to a 300 Watt PSU

  Of course, you can!

  Here is an informational videoabout the possibilities of upgrading your slimline WHAT PSU found on YouTube.  A comparison of three power supplies, including the owner HP PSU and a (two video and CPU) stress test and comparison of noise is shown during the video.

  Be aware that some, but not all, of the PSU, upgrades require a simple and light your PSU slimline support change. Change depends on the power supply model chosen for the upgrade.

  Purchase an adaptor molex as HP UPE is necessary for the Slimlines using a power supply with the format owners microfit ATX 24 pin, as well as the standard for the HTPC power supply ATX 20 pin format.

  Upgrade your power supply at a higher power will not damage your motherboard. A power supply will provide only so much power that is required of him by the mother and peripheral card up to the nominal power of the installed PSU.

  It is for those who wondered how to work around the limitation of the low power 180 Watt power supply that most Pavilion Slimline PCs come with the Assembly. With a power SUPPLY improved, more memory and a graphics card discrete, including support (it is a requirement) your Slimline can be your gaming PC.

  Selecting a graphics card is another topic. Not all graphics cards can hold in the case of a slimline. It takes a low profile video card. They are available for purchase online.

  Kind regards
  ERICO
  Published by erico on 15/11/2009 13:17

  Bravo for Erico 1,000,000,000. Great post. Debunks many myths and the hearsay rule.

• How can I increase the font size in an e-mail message in Windows Mail

  HI, I would like to ask a question please.  I was wondering if someone could tell me if there is a way to enlarge the font in an email so that I can see the words in the e-mail message and also if the person who receives the e-mail message can also see much easier email phrases.

  Thank you very much for your time

  Windows Mail

  Windows Vista Home Basic Edition

  32-bit operating system

  Moved from Vista programs Forum.

  To send: tools | Options | Dial. Set the font size there.
   
  For entrants: reviews | Text size. Select larger.
   
  In addition, you can hold down the Ctrl key and rotate the mouse wheel to resize the text.
   

• How can I increase the size of the font of the text in the WORLD WITHOUT changing the DPI or RESOLUTION?

  This question was asked a thousand times.  I searched for hours and can't find a correct answer.

  I want to increase the font size in all of windows.  The default 9pt is TOO SMALL TO READ at least THAT YOUR FACE IS<12" from="" the="">

  For example, the clock in the lower-right. Or, the dialog boxes when you hover over something like the button start, or help him at question mark, etc.

  Another perfect example: right-click the taskbar, open the taskbar and Start Menu Properties window.  I can not READ anything IN the BOX of THIS exception to its title, which I have increased in the Adv. App. Settings.

  DOES ANYONE HAVE A SOLUTION TO INCREASE THE SIZE OF POLICE FROM 9 TO 11 OR 12?  ANYONE? BUELLER?

  I found a thousand INACCURATE responses.  Please do not repeat them here.

  1. I didn't WANT to INCREASE DPI.  If it was a solution, would not prompt warning about things arise.
  2. I didn't WANT TO CHANGE MY RESOLUTION.  There is nothing wrong with something else in the image on the monitor except Windows chose 9pt as their default font size.  That the LETTERS are too small; nothing else needs increased.
  3. I was for of APPEARANCE ADVANCES SETTINGS under personalization and change what you can change, which limits itself to the Menu, title bars, ToolTip and a few others.  THIS IS NOT ENOUGH.
  4. I tried the regedit merger to change the font from Segoe, Verdana, but it's still at 9pt, so it is still TOO SMALL.

  Thanks in advance for any helpful information.

  Hello

  In addition to the suggestion of Dissed, you can try this:

  You can hold down the CTRL on the keyboard and use the wheel to magnify the entire screen with just scroll.

  I hope that helps!

   

• How can I reduce the size of the page? The txt is too big.  Where is the percentage scale?

  Can someone tell me how to reduce the size of the page as before when I just clicked it and I could make the page large or small %.  The domain controller is different then what I had before.  Thanks Jim

  Hi jsamx,

  You can hold down the CTRL on your keyboard and use your scrolling the mouse to zoom in or or zoom-out of the page.

  Alternatively, you can go to see menu-> zoom-> zoom dynamic.

  Is that what helps with your query?

  Kind regards

  Rahul

• How to determine the amount of memory shipped on the PXI-5114

  How to determine the amount of memory onboard, I have on my PXI-5114?

  Thanks in advance.

  Hello

  I'm sorry I didn't know you already had the map.  There is a property for NO-Scope node to determine the total amount of available memory that we can then divide down to get the memory available per channel.  Please see the vi and help below:

  

  This gives a shot, just drop it in a VI that you use and if it should return your memory cards.  If you don't have a LabVIEW I can probably retrieve the purchased version by querying your serial number.

  Kind regards

  Kyle S

• I have more than music in itunes my ipod can hold, the last time I synced, there was a box to synchronize playlists only, now it's over so how can I now sync playlists only, you can see?

  I have more than music in itunes my ipod can hold, the last time I synced, there was a box to synchronize playlists only, now it's over so how can I now sync playlists only, you can see?

  Select the iPod in iTunes (click on its button on the device on the horizontal bar) to show its settings screen in the iTunes window.  The side left (in the sidebar), under settings, click music.  To the right, the settings screen of music from iPod, where you tell iTunes how to sync songs to the iPod.

  NOTE: All of the songs on the iPod that are not in your iTunes library (on the computer) will be lost.

  Check the box to Sync music (if it isn't already).  Below, choose the option synchronize playlists, artists, albums, and genres.  Below, under playlists, select (check) the playlists you want on the iPod.  You can also select other articles on other lists, as you wish.  Click Apply to sync your selection to iPod.

  Further, iTunes automatically updated the iPod with the changes made to the selected part of the iTunes music library.  For example, if you update a list of selected reading (add/remove songs), updates iTunes, the iPod with the same changes the next time you connect (or click Sync if already connected).

• Sub c multi port vga adapter can not fit in the hold of the Mac book pro computer

  Sub c multi port vga adapter can not fit in the hold of the Mac book pro computer

  None of the MacBook Pros have any type of VGA port.

  What MacBook Pro you have?

• Where can I find list of pins for connectors 68 pins on the SMU-8430/8 and the SMU-8431/8

  We need to build new cables for the SMU-8430/8 and 8431/8 interface cards series.

  I can't find pinout information or other connectors 68-pin on the front of these cards.

  Can someone point me in the right direction to find this information.  Thank you.

  The design of the system requires new cables we don't need a list of the pins.

  After a few more watching on the web site of NOR, I found the information I need here:

  http://digital.NI.com/manuals.nsf/WebSearch/F5A76AD1B0C3B1FE86257B59006A9EAD

  Thanks for the reply.

• Can I use PXI embedded controller connected to the PC under LINUX operating system

  Hi all

  We ara tries to connect to PXI8106 (in 1042 chassis) to PC under LINUX via ethernet (cable cross at the moment), is the version of labview 8.5.

  Can I use PXI embedded controller connected to the PC under LINUX operating system?

  If Yes, where can I find its configuration in the .ini file?

  Thanks in advance.

  Hello bachir_elec,

  I'm sending you two links that I don't provide the information you need.

  Using Linux on an Embedeed PXI controller:

  http://digital.NI.com/public.nsf/allkb/821E0C115A3B4EF286257069004B8352?OpenDocument

  Configuration of your PXI Linux system:

  http://digital.NI.com/public.nsf/allkb/5CEEC941FB7B0488862573F700653B21?OpenDocument

  You can take a look?

• In Lightroom 4 when I press on and hold down the ALT key, I can't move the slider black and white

  In Lightroom 4 when I hold down the ALT key, I can't move to the black or white and it does not show the clipping. Essentially, I am now the ALT key and the sliders will not move. I'm doing something wrong? Thank you.

  There was a problem with the integration of my mouse. All fixed.

• How can I measure the variable tension with the DMM and switch?

  Hello, engineer,

  I am a student, I want to measure the varying tensions from V to Via. I have the following equipment: SMU-1065 PXI-4065 PXI-2529. I use the PXI-8360 and PXI-8361 to connect with my PC. I hope I can do that when I have the next blood I should click with the mouse and connect the right position to the object of measurement.

  How can I achieve that?

  Any suggestions with great satisfaction.

  Since I know a little English, if I did not explain my question clearly, please ask me.

  Best wishes.

  Kind regards.

  chuanyuehuoxian

  Yes, you can.

  You can set the samples when using DMM.

  You can also refer to the example in LabVIEW.

  THX!