Impossible to compile of the SMU-8101 Code
Hello
My system is an SMU-1065 chassis (I also had the same problem in the SMU-1082 chassis), SMU-8101 controller with Windows 7 installed by OR and the following instruments:
DMM PXI-4071, power supply PXI-4110, DAQ SMU-6356, calendar card SMU-6674 t and Motion Control PXI-7332.
I also have a SMU-8361 which I use from time to time and will be what I use in the long term.
Now for the real problem. What happens is I put all code in labview by using the instrument of VI driver and everything works perfectly. I can do VI calling Subvi appeal VI instrument and it works fine, but if I double click on a VI instruments and then try to watch the block schema, for example, opening 'DAQmx create channel (I-voltage-Basic) .vi' it seems to break the code. At first he said nothing but once I hit the button the arrow will change to the broken gray arrow and claim that the code could not compile (this is without actually changing anything with VI, I open it and look what he did).
Also any code I wrote called VI now get the same error if I click display error it will bring up a window I was looking for, so if I was watching the façade, then clicked on see the error it would bring just to the top of the front again without bringing out something. If I create a new file and build a little vi using instrument drivers, it works very well, if I copy the vi of the broken code and paste it into the new file it will fail with the same error.
It is not to have this behavior with all the instrument of VI, but will happen with some. I mentioned, it comes up with 'DAQmx create channel (I-voltage-Basic) .vi' but then this does not happen with "DAQmx Timing(Sample_Clock).vi. I have not experienced and verified exactly what VI he comes up with, but it seems to happen with other drivers of instruments as well, not only for the acquisition of data. It seems also that occur when you use the SMU-8101. If I connect it to a computer this is not pop up. My business control primarily the chassis using MXI cards so we have no embedded controllers available that I could swap in to see if it still happens.
It's not a big problem, glancing in the instrument vi is not necessary for me to do my job, I just do it to try to better understand what exactly is happening, but it's something I'm curious about.
Hi arielm,.
Have you tried to repair or uninstall/reinstall DAQmx? You can find the latest version here: http://www.ni.com/download/ni-daqmx-9.9/4707/en/
Tags: NI Software
Similar Questions
-
Impossible to compile using the beta 2 release
When I read that Beta 2 is out, I immediately had to download, install and try yesterday. Unfortunately I can not compile more
I always get the error:
dyld: library not loaded: libQtXml.4.dylib
Applications/bbndk-10.0.6-beta/host_10_0_6_1/Darwin/x86/usr/bin/lupdate.. .Pro
Referenced from: /Applications/bbndk-10.0.6-beta/host_10_0_6_1/darwin/x86/usr/bin/lupdate
Reason: image not found
make [1]: leaving directory '... / source/bb10/translations.
make [1]: * [update] Trace/BPT trap: 5
make: * [Makefile] error 2
I found a file called libQtXml.4.dylib, so I don't understand why it does not...
Try the following command.
1. open the Terminal applicationCD/Applications/bbndk
ln-s target_10_0_6_384 / targetIn my case, it worked well.
symbolic link host_10_0_6_1/Darwin/x86/usr/lib/libQtXml.4.dylib/libQtXml.4.dylib is wrong.
host_10_0_6_1/Darwin/x86/usr/lib/libQtXml.4.dylib->... /... /.. /.. /.. /Target/Darwin/x86/usr/lib/Qt4/lib/libQtXml.4.8.0.dylib
I think that it is correct
host_10_0_6_1/Darwin/x86/usr/lib/libQtXml.4.dylib->... /... /.. /.. /.. /target_10_0_6_384/Darwin/x86/usr/lib/Qt4/lib/libQtXml.4.8.0.dylib -
software installed impossible to associate with the adobe ID code
I installed, enter the serial number and registered Adobe Lightroom 5 on my MacBook Pro (2.6 GHz Intel Core i7).
When I click on the icon of the software it take me back to enter a serial number and registration. When I check the software associated with my Adobe ID, Lightroom does not.
What can I do?
I solved the problem through to change the permissions on my hard drive. Thank you
-
Impossible to DW5. get the U44M1P7 error code
Product approved and PAID for.
This error code means some files are missing in your installation. Have you purchased CS5 from Adobe? Installation failed. Error U44M1P7 | Updates
Nancy O.
-
I am trying to use MAX to navigate up to a DAQ SMU-6363 connected to my SMU - 8101 RT connected to my local network, but encounters an error: "error-88716 occurred at communication·entre·dispositifs·de·sante·personnels, or the possible reasons: the requested operation failed because a driver on the local and remote system versions are different." Updated the driver for versions on both systems are the same. "Remote system: 172.17.2.65, Incompatible driver: NI - DAQmx Device Driver 9.4.0f0.
This problem occurred recently when I've updated LabVIEW on my development computer to the latest version (2013 f2), which updated DAQmx on my development for v9.8 machine.
While I'm not quite there, I intend to analyze an audio signal using the SMU-6363. I guess I'll need to have all the properly information in MAX before I have a hope of implementation in LabVIEW.
I am now updating the drivers / firmware on the SMU help system full of communication between my development system and the SMU system and having problems.
During an attempted 'Select all to install' for 'NOR-DAQmx 9.8.0"in the" Add/Remove software"on the SMU-8101 thanks MAX system, I get the error:
---------------------------
Cannot continue following unresolved dependencies:
Acquiring dynamic signals 9.8.0 requires linguistic support for LabVIEW RT 1.0.0.3
Acquiring dynamic signals 9.8.0 requires Intel 8254 x Ethernet Driver 5.0
Counter/Timer 9.8.0 requires linguistic support for LabVIEW RT 1.0.0.3
Counter/Timer 9.8.0 requires Intel 8254 x Ethernet Driver 5.0
NOR-DAQmx 9.8.0 requires linguistic support for LabVIEW RT 1.0.0.3
NOR-DAQmx 9.8.0 requires Intel 8254 x Ethernet Driver 5.0
Multifunction 9.8.0 requires linguistic support for LabVIEW RT 1.0.0.3
9.8.0 multifunction data acquisition requires Intel 8254 x Ethernet Driver 5.0
CompactDAQ 9.8.0 requires linguistic support for LabVIEW RT 1.0.0.3
CompactDAQ 9.8.0 requires Intel 8254 x Ethernet Driver 5.0
CompactDAQ 9.8.0 requires LabVIEW time real 12.0.0
E/s digital industrial 9.8.0 requires linguistic support for LabVIEW RT 1.0.0.3
E/s digital industrial 9.8.0 requires Intel 8254 x Ethernet Driver 5.0
Analog output series 9.8.0 requires linguistic support for LabVIEW RT 1.0.0.3
Analog output series 9.8.0 requires Intel 8254 x Ethernet Driver 5.0
OR-653 x 9.8.0 requires linguistic support for LabVIEW RT 1.0.0.3
OR-653 x 9.8.0 requires Intel 8254 x Ethernet Driver 5.0
SC Express 9.8.0 requires linguistic support for LabVIEW RT 1.0.0.3
SC Express 9.8.0 requires Intel 8254 x Ethernet Driver 5.0---------------------------
This dialog box does not offer an option to automatically try to download or to locate the missing packets. Research online revealed no obvious statement upgrade for my particular case.
I downloaded and installed v9.8 DAQmx as well as RealTime 2013 module on my development machine, and am trying to download the 4 GB device drivers.
Is there a suggested method for the SMU-8101 software update / firmware must match that of my development machine that does not require me trying decrypt and download the packages manually?
I've never worked with the SMU (or any remote system) with LabVIEW front and wait it would be an easy fix for someone more experienced in this.
Owen
AHA!
OK, that explains it. You actually have LabVIEW 2011 on target (SMU-8101) but you have LabVIEW 2013 on the host. You have all the required software installed on the host computer, but there are conflicts between the required versions of the software on the controller itself compared to what you're trying to install now. You have 3 ways to do this:
(1) the cleaner to proceed is to keep track of all the software components that you have installed (version is not important) and then UNINSTALL all the controller software, and then REINSTALL your software (leaving MAX select the latest versions of everything). This ensures that you'll get the latest components of software.
(2) the 'simpler' wat to proceed is to pass by and "update" symbolizes all the components with an icon 'Bang' (yellow triangle with an exclamation point) to upgrade/reinstall the latest version found on the host - the icon of 'bang' software currently installed on the target, but more recent versions exist on the host computer. Version does not update without user intervention, even if the other components require more recent versions. This lump all your versions later, that's what want the latest version of DAQmx.
(3) nuclear option - reformat your controller and reinstall all software. This is not recommended, but this option always exists.
-Danny
-
Hi, just got my new cRIO-9067. I have converted my project over the cRIO-9067 since the cRIO 9074. Same layout module, same engine, same scan code custom fpga, (hybrid mode). I have no problem of compilation for the 9074, which is a lower performance FPGA architecting the 9067 FPGA.
The final timetable for windows compilation shows that the timing is respected for all clocks - 40, 80 and 120 MHz (I use a clock derived for some code sctl). During the end of compilation, during the phase of gen bitfile, I get the dreaded time violation. Investigation of the breach indicates that it is not the custom code, it is not schema components. One of them seems to be linked to the card series OR 9870 I in the chassis.
Why? Is there anything I can try with the compiler directives for this problem? You would think that it would be easier to compile for the highest performance FPGAS...
OK, don't ask me how I thought this output - to run I changed nothing else than this: feed the I/O node a reference FPGA of e/s instead of configure the node via the menu "link to. It makes no sense, but the compilation succeeded when I did this.
I know it is because I created a very simple test VI in my project and made sure it does not compile without it.
-
Impossible to determine the application exit code
Hi guys,.
I used the code below at the exit of the application programmatically.
Application:instance()->requestExit();
but I get following errors:
Impossible to determine the application exit code
Please find the error attatched image.
Please help me to fix it.
Application::instance()->exit(0);
Or any code you want to use instead of 0.
-
tried the Device Manager and add/install the old hardware on the wizard... he finds ADSInstant HTV PC1, but sending the message... Impossible to install correctly the code 10
Restore the system to then it was working properly.
-
During the update to VMware Player 4.0.3 I get this error for vmnet-only compilation. I found a patch for 4.0.2 and a similar compilation for the last error update 4.0.2 but not for version 4.0.3. Any tips?
JOURNAL / usr/bin/make-j - C/tmp/vmware-root/modules/vmnet-only self-build SUPPORT_SMP = 1 HEADER_DIR=/lib/modules/3.3.2-6.fc16.x86_64/build/include CC = / usr/lib64/ccache/CCG GREP = / usr/bin/make IS_GCC_3 = no VMCCVER = 4.6.3
Using 2.6.x kernel build system.
make: entering directory ' / tmp/vmware-root/modules/vmnet-only»
do /lib/modules/3.3.2-6.fc16.x86_64/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. \
MODULEBUILDDIR = modules
make [1]: Entering directory ' / usr/src/kernels/3.3.2-6.fc16.x86_64'
CC [M] /tmp/vmware-root/modules/vmnet-only/userif.o
CC [M] /tmp/vmware-root/modules/vmnet-only/netif.o
CC [M] /tmp/vmware-root/modules/vmnet-only/filter.o
' / tmp/vmware-root/modules/vmnet-only/userif.c: in function ' VNetCsumCopyDatagram ': '.
«/ tmp/vmware-root/modules/vmnet-only/userif.c:520:3: Fehler: Inkompatibler Typ as 1 Argument von "kmap «»
«include/linux/highmem.h:48:61: Anmerkung: ' struct page * 'works, aber hat type Argument' const struct < anonymous > «»
«/ tmp/vmware-root/modules/vmnet-only/userif.c:523:3: Fehler: Inkompatibler Typ as 1 Argument von "kunmap «»
«include/linux/highmem.h:54:60: Anmerkung: ' struct page * 'works, aber hat type Argument' const struct < anonymous > «»
make [2]: * [/ tmp/vmware-root/modules/vmnet-only/userif.o] Fehler 1
make [2]: * Warte auf noch nicht processes going...
' / tmp/vmware-root/modules/vmnet-only/filter.c:60:16: Fehler: "THIS_MODULE" ist yesterday nicht deklariert (nicht in einer Funktion).
make [2]: * [/ tmp/vmware-root/modules/vmnet-only/filter.o] Fehler 1
' / tmp/vmware-root/modules/vmnet-only/netif.c: in function ' VNetNetIfSetup ': '.
' / tmp/vmware-root/modules/vmnet-only/netif.c:134:7: Fehler: unbekanntes Feld "ndo_set_multicast_list"in the Initialisierung angegeben.
/tmp/vmware-root/modules/vmnet-only/Netif.c:134:7: Warnung: Initialisierung von inkompatiblem Zeigertyp [standardmassig aktiviert]
/tmp/vmware-root/modules/vmnet-only/Netif.c:134:7: Warnung: (nahe der Initialisierung as"vnetNetifOps.ndo_validate_addr '") [standardmassig aktiviert]
make [2]: * [/ tmp/vmware-root/modules/vmnet-only/netif.o] Fehler 1
make [1]: * [_module_/tmp/vmware-root/modules/vmnet-only] error 2
make [1]: leaving directory ' / usr/src/kernels/3.3.2-6.fc16.x86_64'
make: * [vmnet.ko] Fehler 2
make: leaving directory ' / tmp/vmware-root/modules/vmnet-only.- Download this archive: http://weltall.heliohost.org/wordpress/wp-content/uploads/2012/01/vmware802fixlinux320.tar.gz
- Extract archive
- Edit the file patch - modules_3.2.0.sh. Look for the line
plreqver=4.0.2
and to takeplreqver=4.0.3
- Save the file, and then run it.
sudo ./patch-modules_3.2.0.sh
I have this picked up on the Internet and it worked for me, as I had the same problem after upgraging my Linux Distro.
Caveat Emptor
Thank you
Sky
-
Impossible to compile in 6i forms in the forms 11gAS (HP - Ux)
We are compiling forms 6i shaped 11g (on HP - Ux server), we get an error.
In all our forms 6i, we have classified under a group of objects. When we compile the forms in 11gAS we get an error
"FRM-18108: unable to load the following items."
The form in which is created the group object compiled successfully. But those forms which has classified this group object fails.
The same mistake, we get to these forms of 6i where we have sub categorized library of objects.Your object library is in the forms_path that uses the compilation? The case of the file is the same?
-
Impossible to compile the driver for windows in MDF
I'm trying to use the windows driver instead of the Adobe driver by selecting the windows default printer 'use' in the target presentation window and recompiling, but apparently return to the target presentation printer Agent.
I select the default windows printer and click ok:
If I open immediately the objectives of the presentation, he shows that he did not save my selection because it always shows the selected Adobe presentation.
Just in case it did, in fact, compile with the windows driver, I go ahead and compile to a new MDF and run jfmerge with the following command line:
JFMerge mypo.mdf mypo.dat mypo.pcl - aiijfmerge.ini - zmypo.pcl - allmypo.log - auwpon - aspWindows
This is what appears in the log:
2009-11-04 12:13:30 jfmerge: [125] * processing data file: 'mypo.dat. '
2009-11-04 12:13:30 jfmerge: [289] 'mypo.mdf' MDF file opens.
2009-11-04 12:13:30 jfmerge: [247]'Windows' printer driver has not has been compiled in this MDF.
2009-11-04 12:13:30 jfmerge: [210] nothing has been printed.Can someone do the light on how to get the Windows printer driver compiled in my mdf?
Thanks in advance for any help!
Phil
Windows drivers and Agent print drivers are mutually exclusive. In the design tool, under objective presentation select "Use print agent presentment target" and then select "clear all". Then go back and select the windows drivers.
see you soon
c
-
Hello.
I have a 1071-SMU-PXI chassis with controller SMU-8101 (Windows XP) and SMU-4496 module. Also, I NI DAQmx installed on the controller operating system and on another computer in the same network.
Is it possible to acquire measurement data of this ADC on network computer using remote access? Or this feature is available only if you use real-time controllers?
Thank you.
When you perform a MXI installation like this, you essentially replace the embedded controller that installs in slot 1 with your laptop / desktop. You will need to install the driver daqmx for laptop/desktop computer computer which is connected to the chassis via MXI cable.
-
Compilation of the variable results in LabVIEW FPGA
Hello. I would ask why LabVIEW FPGA generates different results of compilation for the same code. When I compile several times my code, the maximum speed and total changes bitfile slices generated according to the compilation, but I does not alter with the FPGA VI. In addition, is the precise relationship of compilation? Thank you
It's normal. The FPGA compiler starts to place pieces of code on the FPGA somewhat randomly and adjusts them until either the design adapts and responds to the criteria of the moment or there that the compiler determines that it cannot fit all the code and meet time constraints. The outputs that the FPGA VI generates when run will always be the same.
-
I can download from the internet, but cannot update any programs at all, get code Error 0x80072EFD or 'impossible to connect to the server' messages on windows XP. having run "fix it." It fails not too
Hello
Method 1: the question it looks that the computer is not able to connect to the update server. Here is the article which allows to fix this problem.
How to resolve problems connecting to Windows Update or Microsoft Update
http://support.Microsoft.com/kb/818018/en-usMethod 2; Temporary connection related errors may occur when you use Windows Update or Microsoft Update
http://support.Microsoft.com/kb/836941Hope you will soon find your landline number.
-
Application crashes after links compilations on the command line and running on Simulator
Hi all
I have a project where I need to link my static libraries built separately (but using the toolchain/compiler inside the BBNDK) for a sample application QML BB10. I am relatively new to BB10 and its environment.
Although the application compiles and links successfully, the performance of the application is segmenting online
AbstractPane *root = qml->createRootObject
(); My other static libraries have many references to the C++ Standard Library, such as strings, streams etc. and these are inside libstdc++.a/.so. Also some references to struggling and Expat. And so I assured these library on my road to compile as follows
qcc -Vgcc_ntox86 -lang-c++ -Wl,-rpath-link,/opt/bbndk/target_10_0_9_386/qnx6/x86/lib -Wl,-rpath-link,/opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib -o o-g/MyApp o-g/.obj/main.o o-g/.obj/MyApp.o o-g/.obj/moc_MyApp.o -L/opt/bbndk/target_10_0_9_386/qnx6/x86/lib -L/opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib -L/opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/qt4/lib -L/opt/bbndk/lib ./myStaticLib.a /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/gcc/4.6.3/libstdc++.a /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libexpat.so.2 /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libsocket.so -lm -lbps -lbb -lbbcascades -lQtDeclarative -lQtScript -lQtSvg -lQtSql -lQtXmlPatterns -lQtXml -lQtGui -lQtNetwork -lQtCore
With this application compiles / links with success but as said previously, it crashes inside createRootObject.
If I don't specify my static library (myStaticLib.a), out of all references to myStaticLib.a in the code and remove the stdc library ++ application goes ahead and the screen correctly.
NOTE: myStaticLib.a is not related to the QT code in any way. I call the method inside myStaticLib after that I booted properly QT and after showing the first screen in the code.
I was able get out the base of the Simulator file and also use it with this gdb on my build machine. Here is the result of the BDG.
root@server:/opt/bbndk#host_10_0_9_52/linux/x86/usr/bin/ntox86-gdb /home/puneet_narsapur/webrtc/ip/psl_p2pwebrtc_r2835_x86_bb10/trunk/third_party/libjingle/source/talk/examples/BBTalk/x86/o-g/PeerConnection /home/puneet_narsapur/webrtc/ip/psl_p2pwebrtc_r2835_x86_bb10/trunk/PeerConnection.core GNU gdb (GDB) 7.4 qnx (rev. 691) Copyright (C) 2012 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "--host=i686-pc-linux-gnu --target=i486-pc-nto-qnx6.5.0". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /home/puneet_narsapur/webrtc/ip/psl_p2pwebrtc_r2835_x86_bb10/trunk/third_party/libjingle/source/talk/examples/BBTalk/x86/o-g/PeerConnection...done. [New pid 8880242 tid 1] [New pid 8880242 tid 2] [New pid 8880242 tid 3] [New pid 8880242 tid 4] [New pid 8880242 tid 5] [New pid 8880242 tid 6] [New pid 8880242 tid 7] [New pid 8880242 tid 8] [New pid 8880242 tid 9] [New pid 8880242 tid 10] [New pid 8880242 tid 11] [New pid 8880242 tid 12] [New pid 8880242 tid 13] warning: Corrupted shared library list: 0x0 != 0x86f8000 warning: Could not load shared library symbols for 15 libraries, e.g. libQtDeclarative.so.4. Use the "info sharedlibrary" command to see the complete listing. Do you need "set solib-search-path" or "set sysroot"? Program terminated with signal 11, Segmentation fault. #0 0xb086709e in __free () from /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libc.so.3 Traceback (most recent call last): File "/opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libstdc++.so.6.0.16-gdb.py", line 59, in
from libstdcxx.v6.printers import register_libstdcxx_printers ImportError: No module named libstdcxx.v6.printers (gdb) bt #0 0xb086709e in __free () from /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libc.so.3 #1 0xb0866c6b in free () from /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libc.so.3 #2 0x08325e80 in operator delete(void*) () #3 0x08325ecc in operator delete[](void*) () #4 0x0832a69e in std::ios_base::~ios_base() () #5 0xb962fa8f in ?? () from /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libbbcascades.so.1 #6 0xb963074c in ?? () from /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libbbcascades.so.1 #7 0xb952d3c8 in bb::cascades::AbstractTextControl::setText(QString const&) () from /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libbbcascades.so.1 #8 0xb94df30c in bb::cascades::AbstractTextControl::qt_metacall(QMetaObject::Call, int, void**) () from /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libbbcascades.so.1 #9 0xb94e7762 in bb::cascades::Label::qt_metacall(QMetaObject::Call, int, void**) () from /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libbbcascades.so.1 #10 0xb9e9686d in ?? () #11 0x089b6598 in ?? () #12 0x00000002 in ?? () #13 0x0000002f in ?? () #14 0x07b9a14c in ?? () Cannot access memory at address 0x89e24cc (gdb) info sharedlibrary warning: Corrupted shared library list: 0x0 != 0x86f8000 From To Syms Read Shared Object Library 0xb8638000 0xb86500ac Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libexpat.so.2 0xb82dd000 0xb8314824 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libsocket.so.3 0xb8203000 0xb823b8d4 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libm.so.2 0xb825f000 0xb82bf56c Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libbps.so.3 0xb8450000 0xb848c780 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libbb.so.1 0xb9400000 0xb9c5a200 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libbbcascades.so.1 No libQtDeclarative.so.4 No libQtScript.so.4 No libQtSvg.so.4 No libQtSql.so.4 No libQtXmlPatterns.so.4 No libQtXml.so.4 No libQtGui.so.4 No libQtNetwork.so.4 No libQtCore.so.4 0xb8665000 0xb86d7a88 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libcpp.so.4 0xb0837000 0xb08d7cc0 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libc.so.3 0xb8247000 0xb825c118 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libscreen.so.1 0xb823c000 0xb824210c Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libpps.so.1 0xb82c9000 0xb82cd0c4 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libslog2.so.1 0xb8b44000 0xb8be11e4 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libbbsystem.so.1 0xb82c2000 0xb82c7160 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libbbsystemlocale.so.1 0xb82cf000 0xb82dabac Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libEGL.so.1 0xb831d000 0xb832707c Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libGLESv2.so.1 0xb8419000 0xb8425248 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libgestures.so.1 0xb8436000 0xb844a1a0 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libimg.so.1 0xb8aef000 0xb8b2447c Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libstrpattern.so.1 0xbacf9000 0xbae94cd0 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libwebview.so.2 0xb8427000 0xb842f48c Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/liblgmon.so.1 0xb8493000 0xb84aa124 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libz.so.2 0xb8ab4000 0xb8adf400 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libpng14.so.0 0xb904c000 0xb912a0c0 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libiconv.so.1 0xb8316000 0xb831b504 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libclipboard.so.1 0xb84ab000 0xb84b2190 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libcontext.so.1 0xb93a9000 0xb93d9774 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libnfc.so.1 0xb8243000 0xb82460d0 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libnfc_bps.so.1 0xbab17000 0xbacdcb74 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libicui18n.so.49 0xbb800000 0xbd5c1258 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libwebkit.so.0 0xbb01f000 0xbb498150 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libwebkitplatform.so.0 0xbaeb5000 0xbb015644 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libicuuc.so.49 0xbb56f000 0xbb6e57c0 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libgrskia.so.1 0xb8629000 0xb8634280 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libimfclient.so.1 0xb935c000 0xb939c26c Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libgoogleurl.so.0 0xb8657000 0xb8663254 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libintl.so.1 0xb9c6a000 0xb9cd99c8 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libcpp-ne.so.4 0xb8430000 0xb8435128 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libcounters.so.1 0xbe800000 0xbf952988 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libicudata.so.49 0xbaa99000 0xbaaf5bec Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libcurl.so.2 0xbb526000 0xbb557960 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libfontconfig.so.1 0xbb4e6000 0xbb51c2b4 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libjpeg.so.4 0xbb6fc000 0xbb78e4fc Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libsqlite3.so.1 0xbda11000 0xbdb342dc Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libxml2.so.1 0xbb4a1000 0xbb4db768 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libxslt.so.2 0xbd6ae000 0xbd7273c8 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libfreetype.so.1 0xbb79b000 0xbb7d14f8 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libharfbuzz.so.0 0xb8a99000 0xb8aa8168 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libskia-qnx.so.0 0xb8aab000 0xb8ab1120 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libppscache.so.1 0xb8ae7000 0xb8aed150 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libmmrndclient.so.1 0xb8ae0000 0xb8ae61bc Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libmd.so.1 0xb848d000 0xb8492120 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libaoi.so.1 0xbb7d5000 0xbb7fb7f4 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libinput_client.so.1 0xbd628000 0xbd668138 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libhuapi.so.5 0xb8b25000 0xb8b43838 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libcamapi.so.1 0xbd5cf000 0xbd617450 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libiType.so.1 0xbd8b1000 0xbd9179dc Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libWTLE.so.1 0xbd81e000 0xbd883b50 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libinput_utilities.so.1 0xb8be8000 0xb8bfa260 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libcares.so.1 0xbd783000 0xbd7df6f8 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libssl.so.2 0xbd670000 0xbd6aa5d8 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libgssapi.so.1 0xb8328000 0xb832c084 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libstrm.so.1 0xbd954000 0xbda060a4 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libsbgse56.so.0 0xb93de000 0xb93eb1f4 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libmmedia.so.1 0xb93ec000 0xb93fcaec Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libmmfilter.so.1 0xb9c5b000 0xb9c68d00 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libbz2.so.1 0xb939e000 0xb93a626c Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libhiddi.so.1 0xbdd07000 0xbdeb7764 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libcrypto.so.2 0xb9ce8000 0xb9cf13ec Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libnbutil.so.1 0xbdc23000 0xbdc98498 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libkrb5.so.1 0xb9cde000 0xb9ce6310 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libheimntlm.so.1 0xbdb37000 0xbdbca0e8 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libasn1.so.1 0xb8200000 0xb8202110 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libcom_err.so.1 0xbd736000 0xbd77c91c Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libhx509.so.1 0xbaa7f000 0xbaa8f5f0 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libroken.so.1 0xbd7ec000 0xbd8140fc Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libwind.so.1 0xb8414000 0xb84185c0 Yes (*) /opt/bbndk/target_10_0_9_386/qnx6/x86/usr/lib/libheimbase.so.1 No libHwEGL.so No libegl_gallium.so No libHwglapi.so No libpipe_vmwgfx_drv.so 0xbdf18000 0xbe00a9b8 Yes /opt/bbndk/target_10_0_9_386/qnx6/x86/lib/libstdc++.so.6 No libllvmpipe_drv.so No libHwGLESv2.so (*): Shared library is missing debugging information. (gdb) q root@server:/opt/bbndk# It seems to be crashing within libc.so while trying to release something. There is not any change in the QML code at all.
Even if everything seems to be compilations and links correctly, I'm not able to find the reason for this accident.
I don't change all code QML, but if I include my library and stdc ++ it crashes. If I don't get my library and stdc ++ he does not crash and all is well.
Can someone help me please how to debug this problem? Stuck in this during more than two days
Found the problem. For the other library that I was building with the BB10 NDK build tools, I was not using "qcc-Vgcc_ntox86-lang-c ++. I used instead of the ntox86-g ++ under the host directory. And it lacked the required compiler flags that were used internally by qcc.
After changing the compiler, application has compiled, I did not provide libstdc ++ .a for him also, as well as the application has been properly executed well.
Maybe you are looking for
-
I have notebook open live messenger with my hotmail
I have notebook open live messenger with my hotmail my address and my password is goo. but I notebook open MSN live messenger my email is: * e-mail address is removed from the privacy *. I jump, you can solve this problem Adel
-
vWorkspace 8 - VDI Windows 7 "Error cannot connect to the server '.
Hello We are soon about to begin the deployment of our vWorkspace VDI solution. We have Windows 7 Client s connection to Win 7 Pro 32 Bit VM on Hyper-V. Sometimes when the user intiates a connection to the desktop of Windows 7 VDI published the vWork
-
Hey all,. I have a screen that reads and displays the text of an xml file. It's basically a voting booth, so outside radio two buttons a person votes and then submits to send their response to the server via http post. How to refresh (or reload) th
-
HelloI'm really a novice in the field of pdf script, I would like to ask if someone could help me make a calculation script of a time field with a TOTAL production WORKED HOURS in a day to a calculation of(TimeIN + TimeOUT) - (TimeBreakIN + TimeBreak
-
Hi I got all versions up to 5 LR and upgrade to LR6 but could not find a single way to do cloud (which I don't want) or full version, can you please advise a I've updated every time of LR 1.