Pythonw.exe and Pywin32 errors - program has stopped working properly

Similar Questions

• I use windows 7 and auto start program has stopped working and I can't find a way to recover.

  I use windows 7 and auto start program has stopped working and I can't find a way to recover. Also, I was not able to transfer files on disk or any other storage device, their there on the computer and it says that they work very well, but I can't transfer anything to them.  They will play a disc or view data on a disc that has already been done but don't transfer to the drive if I want to add new files or data to it. Drag and drop is going through the motions, but shows red circle icon.

  [Moved from comments]

  Probably tell you autoplay?

  Control Panel > programs > default Prorams > Change AutoPlay settings

  Or

  In the search programs and files, enter, AutoPlay

• Catalyst Control Center window will appear to indicate that the program has stopped working properly

  Catalyst Control Center window appears when I start the computer, indicating that the program has stopped working properly.

  Uninstall the drivers and the Catalyst Control Center and download the latest version for your operating system from here - http://support.amd.com/us/Pages/AMDSupportHub.aspx

  Jim

• whenever I try to use Adobe 8.2, I get the error program has stopped working. Could not find the network location. What should I do? I cannot uninstall Adobe reinstall either. get the same message

  I am running Windows Vista and explore 10. Adobe is installed on the laptop.  Dell Inspiron 1750 Stodio

  Hello

  Follow the steps in the article mentioned below and see if that fixes the problem.

  http://kb2.Adobe.com/CPS/402/kb402867.html 

  You can also post your query on the Adobe Reader forums for assistance.
  http://forums.Adobe.com/community/adobe_reader_forums/adobe_reader

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• "dsca.exe program has stopped working".

  At startup I get an error message indicating "dsca.exe program has stopped working" how to fix this?

  dsca.exe is a Dell program used with, it of the support center and is not necessary to run at startup.  Go to http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and download, install and run Autoruns.  Pass the all tab.  Check all the items until you find the one who mentions dsca.exe or appears related to Dell (check all the items in the list because there may be multiple entries).  For each entry, uncheck the box to prevent it from start to start, and then click OK.  Restart the message should be gone (and you not have lost all functionality to your system by doing this).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• While opening a program get an error message: program has stopped working, Windows is looking for a solution

  Original title: error message:

  When I try to open one of my programs, I get an error message states that my program has stopped working, Windows is looking for a solution

  Hi SheilaFrenchman,

  ·         Are what program you referring?

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

• Installation/uninstallation program has stopped working.__A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I tried to download a program: System Mechanic Professional 9.0 www.Iola.com
  I recorded it on the desktop, right-click to run as administrator, at this stage, it starts to download but the following message comes to the screen: install/uninstall program has stopped working.
  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  Of course, nothing happens after that and I close the message. I bought this on the internet and I have the activation code. It's good for 3 pc. I put it on my desktop and it works very well. My laptop is Vista Home Premium with 64-bit operating system. Everything else seems to work fine on my laptop but I desperately need this program. Laptop is so slow and Firefox takes forever to open the pages. I get a lot of messages it does not!
  So I appreciate any help you can offer.

  Hi luv2shop,.

  This problem may occur because of the conflict by the present security software on the computer.

  I suggest you try the following steps:

  Step 1: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 2: use the Windows Installer Cleanup utility for delete all entries that are related to the product you have installed wrong:

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/default.aspx/kb/290301

  Step 3: Set the clean boot computer and try to install the program

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 
  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can check with iolo for known problems

  http://www.iolo.com/customercare/

  Note: Make sure that (double check), you install the right version (32bit\64bit) for your computer.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error "this program has stopped working. A problem caused the program blocking work properly"when you try to open the Kodak Home Center

  Original title: notice of work stop Windows

  I recently installed an update of Kodak Home Center version for my printer.  When I try to open the Kodak program and print photos, I get the Windows message: "this program has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available.  Does anyone have a solution to this problem?

  Hi JoeBuono,

  Follow the steps below:

  Method 1:

  Start your computer in a clean boot state and see if that fixes the problem.

  See How to solve a problem by performing a boot in Windows Vista or in Windows 7

  Note: Do not disable any program startup list Kodak when you perform the clean boot.

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  Uninstall and reinstall the Kodak Home Center of your computer and see if that fixes the problem.

  See also: troubleshooting install or uninstall programs

  Method 3:

  See:

  Message: "AiO Home Center has stopped working" when editing and printing photos

• I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  Hello

  Please see error: "License has stopped working". Windows or error: "License has stopped working". Mac OS depending on the operating system you have.

  Hope that helps!

  Kind regards

  Sheena

• PrintMaster "this program has stopped working".

  I used PrintMaster12 for several years without problem.  I don't use it often, the last time I used it may have been as early as last summer.  When I tried to get into it recently I got the "this program has stopped working", Microsoft will notify you if a solution is found, the message.

  Purchased PrintMaster 18 so I thought that it is perhaps a problem with an earlier version and has the same problem.  There is urgency to solve what I need to access the files I have created in the program and printed and distributed in the coming days.

  I tried a clean boot of Windows and turn off Data Execution Prevention, without change to the message that I get.

  I would be very happy to get help to solve this issue.  I installed a variety of small games BigFish downloads in the past year, but again, no other program that I can remember.

  Details about the error in Event Viewer: "failing application pmw.exe, version 4.0.0.1011, time stamp 0x3c15e253, failed module mxdwdrv.dll, version 0.3.6002.18005, time stamp 0x49e0378e, exception 0xc0000005, fault offset 0 code 00071238, process id 0 x 780 x, start time of application 0x01cb172b3bbefe17.»

  Brand and model of the printer?

  Failed application pmw.exe - pmw is associated with PrintMaster from Broderbund Properties LLC

  Therefore, uninstall PrintMaster completely.

  Use Revouninstaller or Utility Windows Installer Cleanup if necessary to remove the traces of the program.

  Reinstall PrintMaster in administrator mode (right click and run as admin)

  Uninstall printer software/drivers and reinstall everything whole again.

• I tried to delete a spam message, but whenever I tried the program has stopped working. Any thoughts on how I can remove this message?

  I got a message from someone I know who included an attachment that did not open. When I tried to delete the message several times, the program has stopped working and when I reboot Mail message is still there. Any ideas?

  Hello

  1. What is the exact error message?

  2 have you made any changes to the computer before the show?

  3 What is this problem only occurs with email?

  4. what service provider or of the E-mail client that you are using?

  5. what version of windows are you using?

   
   
  I suggest you to provide more information about the issue.
  http://support.Microsoft.com/kb/555375

• Error - "Kaspersky Anti-virus has stopped working properly." in the Windows Vista-based computer.

  Original title: Phantom appearance of reference of Kaspersky Anti-virus in my system.

  I get a problem report "Kaspersky Anti-virus has stopped working properly." and "to resolve this problem, run the update automatic tool provided with I have never installed this program, and it does not appear in my list of installed programs, in fact I never heard before that." Why do I get this message? What should I do about it? (My security program is Panda Global Protection 2012, if by chance it has something to do with it.)

  I did a full restore, but the error has occurred three times today. I know that Kaspersky is not on my computer and has never been. I think it's a virus. http://imgur.com/vjcgF

• I just download aa3 game without problem, uninitialized probs, but as soon as I start the game a window appears saying "error, windows has stopped working", what is wrong?

  I just download aa3 game without problem, uninitialized probs, but as soon as I start the game a window appears saying "error, windows has stopped working", what is happening, please help.

  Hello
   
  Follow the suggestions and see if it helps.
  Method 1
  You can check if the problem exists in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Method 2
  If the problem persists, you can uninstall and reinstall the game.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can provide the event logs in Event Viewer.

  You can provide the exact error in the Event Viewer logs to find out what caused the problem.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  You can also see the article for more information.
  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

• The scientific and Technical Subcommittee module has stopped working

  The scientific and Technical Subcommittee module has stopped working. I can't find a topic for this query.

  Hello

  You'll be maybe lucky...

  http://www.bing.com/search?q=STSC+Inc&form=IE8SRC&src=IE-searchbox

  CSES Inc. is a company that distributes and supports a small programming language (APL == a programming language)

  http://www.stscinc.biz/

• Once the programs are open a window pops up to say "program has stopped working". Even the programs that are running in the background when starting up are close. Help?

  Yesterday I connected my laptop and when I tried oppening a program a window pops up say "program has stopped working". I opened the control panel to start the troubleshooting, and another appeared window "Control panel has stopped working". I tried to open microsoft word and another window popped up, it is true, that you guessed it "word has stopped working". Does anyone know why all of a sudden nothing works?

  Hello

  try a SafeMode system restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.