Average arithmetic
Hello!
Does anyone have the VI of average arithmetic OpenG (at least that table 2D). I installed the OpenG digital package, but he can find.
Or maybe better yet, someone at - it a VI or a good solution for the calculation of the average of the columns in a table 2D?
Greetings
Kristoffer
Tags: NI Software
Similar Questions
-
Average arithmetic of the selected data region
Hello there I need help visual c# .net:
I want to know the average arithmetic mean of the values of foot between two points of the selected user.
I think that the selection of points will be easy with cursor, when the user clicks about data, the cursor will break sharp.
But how can I select the entire data points in these region selected by the user and get the average arithmetic mean of these values of y?
Thanks for your kindly help.
- Use WaveformPlot.MapDataPoint (...) to convert x and y values of the Point data (i.e. pixel)
- Use WaveformPlot.InverseMapDataPoint (...) to Point to the x and y values of data.
- Use the WaveformPlot.GetYData () to get the data that you traced.
- Use the WaveformPlot.GetXData () to get the coordinates of each point you data plotted on the graph. By default the value in the table XData [If you used the method of foot (s)] are essentially calculated from the WaveformPlot.DefaultIncrement and WaveformPlot.DefaultStart. So using these you can calculate the double [] index.
Use above methods to do all the stuff you want.
For example, to get x and are given where the mouse click, you just use the WaveformPlot.InverseMapDataPoint () to the location of the mouse click.
-
Arithmetic overflow Tick counter with GetLastInputInfo (User32.dll)
Hallo evrybody,
How Tick cost may return less than GetLastInputInfo in the attached vi? When I run vi, I sometimes get an average arithmetic overflow when I subtract LastInputInfo time at the tick counter value.
I use LabView Base 2015 SP1 on W7 64 bit Proffesional SP1 (32-bit 15.0.1f1).
Wladimir
I have not tried either, but it is useful to read the documentation:
https://msdn.Microsoft.com/en-us/library/Windows/desktop/ms646302 (v = vs. 85) .aspx
Although it does not too many details, he said that it should not be incremental, so you could get more data (which are not what you see) or you could get data from another source (for example, if someone called SendInput). I have no idea who check County SendInput uses, but this could definitely represent a scenario that explains what you see.
In general, I would say that if you want to compare times, make sure you have a canonical time source.
-
I'm trying to generate an arithmetic and geometric series/sequence with JavaScript.
I try to generate an average arithmetic and geometric
series/sequence with JavaScript. The thing that makes this challenge is that
I use user input to determine the parts of the formula that I use for
generate each sequence. I tried running the formulas, but I learned that I was
channels running through them and not numbers. How to generate my
sequences/series and always use user input? PS, here's my formulas: (a1-East
first term, d and r are difference/ratio, and n is the n-th term)1.) a1 + d * n
2.)a1 * r^n
Entry user of a form is always a string. There are several ways to convert a string to a number in JavaScript:
- Pass it as an argument to Number()
- Pass it as an argument to parseInt() (for an integer)
- Pass it as an argument to parseFloat() (for a floating-point number)
-
Get-Stat & weighted average
When I run
Get-ResourcePool -name "RSNAME" | Get-Stat -Stat mem.consumed.average
Powercli is a weighted average (weighted average arithmetic - Wikipedia, the free encyclopedia)? Or I have to take into account that a VM can have data for each interval points, IE the VM did not exist at that time?
It is a weighted average return.
-
For the question of loop/formula node/Maj register_Beginner
Hello
I am a beginner of Labview and have a newbie question. I think that's most of you very easy, so please try to help me soon
I (X, Y) datavalues... I calculated the average arithmetic using a formula node and a loop for and got (X', Y') out. Now, I want to take the output X' and Y' and calculate an average value in reference to X and Y. Thus, the same calculation in the loop for, but I want to take the output values and feed values again under the entry name. This should be played N times and routes.
I tried using shift registers, but failed to connect properly as I can get what I want. I have attached here this part of my vi where I have the problem. I hope you can help me. Thanks in advance.
Hi Sarah,.
If you need to put the X "-paintings in a registry change, while the original X table remains constant:
-
DASYLab Lite, CompactDAQ Ethernet, "the stream blocked by a later module" error
I receive the message 'the stream blocked by a later module' and then the execution stops. I tried to remove the modules without change. He usually stops 8 minutes, 20 seconds (500) in the race. It happened on two different computers (same network, however). How can I get my program to run longer (forever?)?
I am using a cDAQ NI 9188 (CompactDAQ Ethernet chassis), NI 9237 (strain gauge module), NI 9211 (thermocouple module), OR-DAQmx 9.5.1 and DASYLab Lite 12.00.01. My program of DASYLab affect strips from 100 Hz sampling frequency. The calculation of the average (reduce) block performs an average arithmetic with the size of the interval of 100 and a block size of output of 1.
Thank you!
Which module complains about being blocked? Look at the title bar of the message - it should show the name.
You can observe the locking by turning on pre-trial block view-Animation-FIFO.
I am suspicious that average organizes blocks more were awarded.
One thing to try and really monitor your computer after doing this...
Go to the Options menu in the spreadsheet view, then open the General preferences. Change these two settings - see the image - turning them off. The risk is that your application uses too much memory, so, please, provide oversight.
-
Acquired NI6008 voltage has an offset
Hello
I m trying to read a voltage on my usb ni6008.
Expected of 0V to 3V voltage ranges. But with the added code (derived from the example 'Clk Acq - Int'), I always read a voltage with a lag of about - 1.4V.
100 values should be acquired so that the average arithmetic corresponds to the voltage.
Someone at - there idea has what I m doing wrong?
Thanks in advance
Alex
/ * DAQmx create input and output task * /.
DAQmxCreateTask ("", & vlk0790HandleI ");/ * Configuration input channel * /.
DAQmxCreateAIVoltageChan (vlk0790HandleI,
Dev1/ai0"."
"",
DAQmx_Val_Cfg_Default,
0.0,
3.0,
DAQmx_Val_Volts,
(NULL);DAQmxCfgSampClkTiming (vlk0790HandleI,
"",
10000,
DAQmx_Val_Rising,
DAQmx_Val_FiniteSamps,
(100);/ * DAQmx starts the code * /.
DAQmxStartTask (vlk0790HandleI);/ * Read DAQmx code * /.
DAQmxReadAnalogF64 (vlk0790HandleI,
100,
10.0,
DAQmx_Val_GroupByChannel,
fData,
100,
& iValue,
(NULL);Hi alex,
I think that you don't do anything wrong. The offset can result from the input of the 6008 circuit design.
Explanation of the analog input on the 6008/6009 circuit
Input analog USB-6008/6009 bed approximately - 1.4V compensate with connections of CSR
-Michael F.
-
My detector said initial offset of 10mV without any input. Now, if I want to reset the signal to 0mV so that I don't see the offset and the entrance once my detector detects the signal for the same channel. any ideas?
My apologies for not answering sooner. I had opened to meet one week there was an interruption of level higher and has never come back. In any case...
Materials in most of National Instruments do not shift features, so this must be done in software. SignalExpress generally requires that explicitly do you everything. It has usability problems, like the one you currently have (here set the offsets on each channel individually), but compensates in flexibility. It's almost an old UNIX approach to data acquisition. SignalExpress exposes the acquisition of raw data and simple function blocks that you can string together however you want. In this case, you have two options:
- If your signals all have the same offset, you can use the output of the input stage group DAQ as input a average arithmetic or graduation and Conversion to remove the offset.
- If the signals different shifts (most likely), use a separate step for each.
View the output of the step of scaling that you take data to see the data of zero setting.
-
Hello
I have to write a measurement software that uses a NOR-DAQ 6071E. C++ is used as programming language and the new DAQmx interface is used and seems very well at the moment.
Now, I have a few Questions about the two functions
DAQmxCreateAIVoltageChan
DAQmxCreateAIVoltageRMSChan
The first give me the unmodified sampled values?
The second makes some calculation on each sample?
I need to create the average arithmetic and the RMS of the samples. These features help me with that. Or do I have to do the calculations on my own?
I know I have to do the calculations on mine, which is not a problem.
Would be great for some advise
BR
Hans-Jürgen Lange
Hi Hans-Jürgen,
The DAQmxCreateAIVoltageRMSChan() function is only supported for the integrated DMM to the NI ELVIS II and NI ELVIS II +. For the OR 6071E, you need to use DAQmxCreateAIVoltageChan() and do the calculations yourself.
Brad
-
Hello
attempt to read a file of values, calculate the average arithmetic and printing results:
[JAVA] import java.io.FileNotFoundException;
import java.io.FileReader;
Import Java.util;
import java. IO;
public class MainClass
{
Public Shared Sub main (String [] args)
throws IOException
{
int sum = 0;
int count = 0;
End FileReader = new FileReader ("in.txt");
Scanner src = new Scanner (end);
Number of reading and the amount.
While (SRC.hasNext ())
{
If (SRC.hasNextInt ())
{
sum += src.nextInt ();
Count ++;
}
}
end. Close();
System.out.println ("Average is" + sum/count);
}
}
[JAVA]
File is as follows:
5 2
1.7-4 2
4.5 0 2
6.73 9 0.34
3 11,13 0.77
using Eclipse
I press run, but then nothing happens, but it is clear that what is responsible, but nothing is displayed.
Displays the error message: unable to connect to the virtual machine
com.sun.jdi.connect.TransportTimeoutException
What is the problem? What is the problem? Help, please
Edited by: 887785 the 27.09.2011 05:29887785 wrote:
Helloattempt to read a file of values, calculate the average arithmetic and printing results:
[JAVA] import java.io.FileNotFoundException;
import java.io.FileReader;
Import Java.util;
import java. IO;public class MainClass
{Public Shared Sub main (String [] args)
throws IOException
{
int sum = 0;
int count = 0;
End FileReader = new FileReader ("in.txt");
Scanner src = new Scanner (end);
Number of reading and the amount.
While (SRC.hasNext ())
{
If (SRC.hasNextInt ())
{
sum += src.nextInt ();
Count ++;
}
}
end. Close();
System.out.println ("Average is" + sum/count);}
}
[JAVA]File is as follows:
5 2
1.7-4 2
4.5 0 2
6.73 9 0.34
3 11,13 0.77using Eclipse
I press run, but then nothing happens, but it is clear that what is responsible, but nothing is displayed.
Displays the error message: unable to connect to the virtual machine
com.sun.jdi.connect.TransportTimeoutExceptionWhat is the problem? What is the problem? Help, please
Edited by: 887785 the 27.09.2011 05:29
What happens when you run this command line?
-
[8i] how to calculate a moving average?
I am trying to calculate a moving average over a specific period of time, but I can't quite figure out how to do this. For this particular problem, I am also stuck on a 8i database.
Some examples of data for the problem:
It is a sample of the actual data, which includes the lines around 50K, and is the result of a query, not a table. In addition, the actual data also have a reference number attached to each order, and the end result will be be partitioned by party id number and the region. This sample represents basically something, you might see a unique part number. In addition, these records at the time spacing is not predictable. You might have a single year that has 20 ordered, and another year (or years) that does not.CREATE TABLE my_data ( order_no CHAR(10) , seq_nbr CHAR(4) , area_id CHAR(4) , start_date DATE , unit_time NUMBER(7,2) ); INSERT INTO my_data VALUES ('0000567890','0010','A001',TO_DATE('05/01/2000','mm/dd/yyyy'),0.34); INSERT INTO my_data VALUES ('0000567890','0020','A001',TO_DATE('05/02/2000','mm/dd/yyyy'),0.78); INSERT INTO my_data VALUES ('0000567890','0030','A002',TO_DATE('05/03/2000','mm/dd/yyyy'),0.91); INSERT INTO my_data VALUES ('0000567890','0040','A003',TO_DATE('05/03/2000','mm/dd/yyyy'),0.27); INSERT INTO my_data VALUES ('0000123456','0010','A001',TO_DATE('04/01/2001','mm/dd/yyyy'),0.39); INSERT INTO my_data VALUES ('0000123456','0020','A001',TO_DATE('04/02/2001','mm/dd/yyyy'),0.98); INSERT INTO my_data VALUES ('0000123456','0030','A002',TO_DATE('04/03/2001','mm/dd/yyyy'),0.77); INSERT INTO my_data VALUES ('0000123456','0040','A003',TO_DATE('04/03/2001','mm/dd/yyyy'),0.28); INSERT INTO my_data VALUES ('0000123123','0010','A001',TO_DATE('12/01/2001','mm/dd/yyyy'),0.31); INSERT INTO my_data VALUES ('0000123123','0020','A001',TO_DATE('12/02/2001','mm/dd/yyyy'),0.86); INSERT INTO my_data VALUES ('0000123123','0030','A002',TO_DATE('12/03/2001','mm/dd/yyyy'),0.82); INSERT INTO my_data VALUES ('0000123123','0040','A003',TO_DATE('12/03/2001','mm/dd/yyyy'),0.23); INSERT INTO my_data VALUES ('0000111111','0010','A001',TO_DATE('06/01/2002','mm/dd/yyyy'),0.29); INSERT INTO my_data VALUES ('0000111111','0020','A001',TO_DATE('06/02/2002','mm/dd/yyyy'),0.84); INSERT INTO my_data VALUES ('0000111111','0030','A002',TO_DATE('06/03/2002','mm/dd/yyyy'),0.78); INSERT INTO my_data VALUES ('0000111111','0040','A003',TO_DATE('06/03/2002','mm/dd/yyyy'),0.26); INSERT INTO my_data VALUES ('0000654321','0010','A001',TO_DATE('05/01/2003','mm/dd/yyyy'),0.28); INSERT INTO my_data VALUES ('0000654321','0020','A001',TO_DATE('05/02/2003','mm/dd/yyyy'),0.88); INSERT INTO my_data VALUES ('0000654321','0030','A002',TO_DATE('05/03/2003','mm/dd/yyyy'),0.75); INSERT INTO my_data VALUES ('0000654321','0040','A003',TO_DATE('05/03/2003','mm/dd/yyyy'),0.25);
Here is where I am now in the problem. For example, suppose I want to calculate a moving average over 2 years (average for the 2 years preceding the date of the current row). For my actual data, I probably want to be able to change the period of time (at different times in several queries) on which the moving average is calculated.
I thought that using the analytical function AVERAGE with a window clause might be the way to go, but I don't know exactly how to use the window clause. I can even be completely wrong interpret what is its use, but if all goes well, it should still show what I'm after.
As you can see from the above query, I want to calculate the sum of the unit_time for each order/area_id combo, then roll the way to this total time. (I'm the average total time that a product passes through each area_id per order).SELECT area_id , AVG(tot_area_unit_hrs) OVER ( PARTITION BY area_id ORDER BY min_start ROWS BETWEEN --2 years prior to min_start of current row AND CURRENT ROW ) , --something to indicate the time period the average is over AS time_period FROM ( SELECT order_no , area_id , MIN(start_date) AS min_start , SUM(unit_time) AS tot_area_unit_hrs FROM my_data GROUP BY order_no , area_id ) ORDER BY area_id , time_period
I want to see results like something along those lines... I really don't like how the time period is identified, as long as I can pay by him in chronological order, and he tells me what period of time it covers. The way I show with period_start and period_end in the results of the sample below is just a way that I thought to do this.
Any suggestions?area_id period_start period_end avg_unit_time ---------------------------------------------------- A001 4/30/1998 5/1/2000 1.120 A001 3/31/1999 4/1/2001 1.245 A001 11/30/1999 12/1/2001 1.220 A001 5/31/2000 6/1/2002 1.223 A001 4/30/2001 5/1/2003 1.153 A002 5/2/1998 5/3/2000 0.910 A002 4/2/1999 4/3/2001 0.840 A002 12/2/1999 12/3/2001 0.833 A002 6/2/2000 6/3/2002 0.790 A002 5/2/2001 5/3/2003 0.783 A003 5/2/1998 5/3/2000 0.270 A003 4/2/1999 4/3/2001 0.275 A003 12/2/1999 12/3/2001 0.260 A003 6/2/2000 6/3/2002 0.257 A003 5/2/2001 5/3/2003 0.247Hello
You're close enough. You want a window based on the BEACH, no LINES.
LINES BETWEEN... means that you know exactly how many lines will be in the window, and you don't care what range of values that represents.
RANGE BETWEEN... means that you know the exact scope of the ORDER BY value to include in the window, which could mean any number of lines.When you say "RANGE BETWEEN x BEFORE...". "where the words ORDER BY id of a DATE, x is considered as the number of days. (Which is consistent with the arithmetic DATE Oracle).
Try this:
SELECT area_id , min_start - 730 AS period_start , min_start AS period_end , AVG(tot_area_unit_hrs) OVER ( PARTITION BY area_id ORDER BY min_start RANGE BETWEEN 365 * 2 PRECEDING AND CURRENT ROW ) AS avg_unit_time FROM ( SELECT order_no , area_id , MIN(start_date) AS min_start , SUM(unit_time) AS tot_area_unit_hrs FROM my_data GROUP BY order_no , area_id ) ORDER BY area_id , period_end ;Output of your sample data:
AREA PERIOD_STA PERIOD_END AVG_UNIT_TIME ---- ---------- ---------- ------------- A001 5/2/1998 5/1/2000 1.120 A001 4/2/1999 4/1/2001 1.245 A001 12/2/1999 12/1/2001 1.220 A001 6/1/2000 6/1/2002 1.223 A001 5/1/2001 5/1/2003 1.153 A002 5/4/1998 5/3/2000 .910 A002 4/4/1999 4/3/2001 .840 A002 12/4/1999 12/3/2001 .833 A002 6/3/2000 6/3/2002 .790 A002 5/3/2001 5/3/2003 .783 A003 5/4/1998 5/3/2000 .270 A003 4/4/1999 4/3/2001 .275 A003 12/4/1999 12/3/2001 .260 A003 6/3/2000 6/3/2002 .257 A003 5/3/2001 5/3/2003 .247The period_starts are not quite what you posted, but, if I understand you correctly, you don't mind that.
There should be no problem of partitioning an additional column. -
Calculate the average per slot?
Hi Chaps,
I am a beginner on numbers (almost everything on Mac I would say) and I need help to calculate average values.
These are calculated values (column 2) taken on a specific time of the day (column 1).
I managed to create a third using a built-in function to get the time slot (column 3).14:58:42
235
14
14:59:42
274
14
15:00:50
7937
15
15:01:55
5157
15
16:02:57
1822
16
16:03:57
207
16
Can please somebody see me step by step how to calculate the average by time slot as below?
14
254,5
15
6547
16
1014,5
Kind regards
Stone
This can help you
Assuming you data in a table named 'Data' and the information is summarised in another table (right) named "Summary".
Select cell B1 in the summary table and then type (or copy and paste from here):
= SUMIF(Data::C,a1,Data::B) ÷COUNTIF (Data::C, a1)
shortcut for this is:
B1 = SUMIF(Data::C,a1,Data::B) ÷COUNTIF (Data::C, a1)
Select cell B1, copy
Select column B, paste
-
What does the letter 'e' in the average square in my music?
What does the letter 'e' in the average square in my music?
Explicit
-
Below the average, EtreCheck attached
I might have got a little too aggressive in trying to get rid of a
a few extensions, such as Little Snitch and old Adobe software plug-ins.
I was in the 'Good' performance before, now I'm at "Below average".
Any suggestions are greatly appreciated. Thank you
Corey.
EtreCheck version: 3.0.3 (307)
Report generated 2016-09-09 10:42:35
Download EtreCheck from https://etrecheck.com
Time 05:04
Performance: Below average
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: No problem - just check
iMac (21.5 inch, at the end of 2012)
[Data sheet] - [User Guide] - [warranty & Service]
iMac - model: iMac13, 1
1 3.1 GHz Intel Core i7 CPU: 4 strands
16 GB expandable RAM - [Instructions]
BANK 0/DIMM0
OK 8 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 8 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en1: 802.11 a/b/g/n
NVIDIA GeForce GT 650M - VRAM: 512 MB
iMac, 1920 x 1080
OS X El Capitan 10.11.6 (15-1004) - since startup time: less than an hour
HTS541010A9E662 disk HARD APPLE disk0: (1 TB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
iMac (disk0s2) /: 999,35 (Go 191,05 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
ST1000LM024 HN-M101MBB disk1: (1 TB) (rotation)
disk1s1 (disk1s1) < not mounted >: 32 KB
Backup (disk1s3) / Volumes/Backup: 1.00 TB (53,68 GB free)
Hub keyboard Apple, Inc.
Apple Inc. Apple Keyboard
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Tablet PTZ-930
Apple Inc. Thunderbolt_bus.
INC. OF BUFFALO HD-PATU3
Mac App Store and identified developers
/ Library/Extensions
com.Wacom.kext.FTDI [no charge] (1.0 - SDK 10.10 - 2016-09-02) [Support]
/ System/Library/Extensions
at.obdev.nke.LittleSnitch [no charge] (3.0.3 - SDK 10.8 - 2016-09-09) [Support]
com.Wacom.kext.wacomtablet [no charge] (Tablet Wacom 6.3.11 - 3 - SDK 10.10 - 2016-09-09) [Support]
[no charge] 8 tasks of Apple
[loading] 158 jobs Apple
[running] Apple 72 jobs
[no charge] 42 tasks of Apple
[loading] Apple 160 jobs
tasks of Apple 89 [running]
[loaded] com.adobe.AAM.Updater - 1.0.plist (2016-08-30) [Support]
[cannot] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist (2016-07-13) [Support]
com.adobe.AdobeCreativeCloud.plist [running] (2016-06-24) [Support]
com.Wacom.wacomtablet.plist [running] (2015-08-25) [Support]
[loading] com.adobe.ARMDC.Communicator.plist (2016-07-13) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-13) [Support]
com.Adobe.adobeupdatedaemon.plist [running] (2016-08-30) [Support]
com.Adobe.agsservice.plist [running] (2016-08-15) [Support]
[loading] com.adobe.fpsaud.plist (2016-06-28) [Support]
[loading] com.barebones.authd.plist (2016-08-23) [Support]
[loaded] com.barebones.TextWrangler.plist (2011-02-09) [Support]
[loading] com.insynchq.insync.daemon.plist (2016-08-24) [Support]
[loaded] com.oracle.java.Helper - Tool.plist [Support]
com.rogueamoeba.Hermes.plist [loading] (2008-01-09) [Support]
[loading] com.adobe.AAM.Updater - 1.0.plist (2016-07-21) [Support]
[loading] com.google.keystone.agent.plist (2016-08-20) [Support]
iTunesHelper hidden Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Hidden Dropbox application (/ Applications/Dropbox.app)
Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app/Contents/Support/AdobeResourceSynchronizer.app)
Hidden Google Drive application (/ Applications/Google Drive.app)
AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2016-08-30) [Support]
FlashPlayer - 10.6: 22.0.0.209 - SDK 10.9 (2016-08-16) [Support]
Default browser: 601 - SDK 10.11 (2016-07-19)
AdobePDFViewerNPAPI: 15.007.20033 - SDK 10.8 (2015-03-17) [Support]
AdobePDFViewer: 15.007.20033 - SDK 10.8 (2015-03-17) [Support]
Flash Player: 22.0.0.209 - SDK 10.9 (2016-08-16) [Support]
WacomTabletPlugin: WacomTabletPlugin 2.1.0.6 - SDK 10.9 (2015-08-25) [Support]
fbplugin_1_0_3: unknown (2010-02-25) [Support]
Picasa: 1.0 (2010-04-09) [Support]
AdBlock - BetaFish, Inc. - https://getadblock.com (2016-05-22)
Flash Player (2016-06-28) [Support]
WacomTablet (2015-08-25) [Support]
Automatic backup: YES
Volumes to back up:
iMac: disc size: 999,35 GB disc used: 808,29 GB
Destinations:
Backup [Local]
Total size: 1.00 TB
Total number of backups: 46
An older backup: 27/06/16, 07:20
Last backup: 09/09/16, 10:14
Backup disk size: too small
Backup TB 1.00 size < (disc 808,29 GB X 3)
7% kernel_task
2% SDM
2% WindowServer
1% mdworker (6)
0% mds_stores
Top of page process of memory: ⓘ
906 MB kernel_task
459 MB softwareupdated
Safari of 360 MB
180 MB Dropbox
164 MB Google Reader
10.00 GB of free RAM
5,60 used GB RAM (2.81 GB being cached)
Used Swap 0 B
Sep 9, 2016, 10:33:48 AM/Library/Logs/DiagnosticReports/WacomTabletDriver_2016-09-09-103348_ [redacted]. Crash
/ Library/Application Support/Tablet/WacomTabletDriver.app/Contents/MacOS/WacomTabletDriver
Sep 9, 2016, 10:30:17 test - passed
Sep 9, 2016, 09:02:43 AM/Library/Logs/DiagnosticReports/M3 data Recovery_2016-09-09-090243_ [redacted] .hang
/ Applications/M3 Data Recovery.app/Contents/MacOS/M3 Data Recovery.app/Contents/MacOS/M3 data recovery
I see something that will significantly reduce your performance: the connection points. Click on System Preferences > users and groups > login items and take a look at this list. The drop box starts up with the computer, as is Google Drive. These are the memory and CPU hog. In fact, outside the iTunes Helper, this entire list is probably to have an effect on the performance of the system.
Try this: highlight each item, and then select the sign less down the list to remove. Restart the computer and run the EtreCheck again. I am betting, you will see a big improvement.
You can add items one by one to determine which ones really is you get bogged down backwards.
Maybe you are looking for
-
Hey,. I need to disable scrolling on the body and turning it on div which appears on the top. I'm trying body overflow: hidden;and on the div that show superior overflow: auto; It works in all the major mobile browsers, but in firefox, it isn't. I ha
-
How to synchronize zip for audio book from computer to iPod?
I need to transfer a zip file (audiobook) download folder from my computer to the iPod for portability purposes. How to unzip and transfer (synch)?
-
Battery separately bought, guarantee covered?
Six months ago, I bought a battery of an ASP here in Saudi Arabia. Now that the battery is not. I went back to that ASP. and ask if they can replace it, they said to me that he is not covered under warranty at the time wherever they have gave me the
-
problem with the installation of update KB948465
Impossible to update the window Vista Service Pack 2 (KB948425) error code 800F080D
-
Working status interface Windows does not
I have a Lexmark X 6575 printer with a wireless connection to a Dell PC with Windows 7. Whenever I feel that I have to manually close the window status of the job to print again!