PrintMaster "this program has stopped working".
I used PrintMaster12 for several years without problem. I don't use it often, the last time I used it may have been as early as last summer. When I tried to get into it recently I got the "this program has stopped working", Microsoft will notify you if a solution is found, the message.
Purchased PrintMaster 18 so I thought that it is perhaps a problem with an earlier version and has the same problem. There is urgency to solve what I need to access the files I have created in the program and printed and distributed in the coming days.
I tried a clean boot of Windows and turn off Data Execution Prevention, without change to the message that I get.
I would be very happy to get help to solve this issue. I installed a variety of small games BigFish downloads in the past year, but again, no other program that I can remember.
Details about the error in Event Viewer: "failing application pmw.exe, version 4.0.0.1011, time stamp 0x3c15e253, failed module mxdwdrv.dll, version 0.3.6002.18005, time stamp 0x49e0378e, exception 0xc0000005, fault offset 0 code 00071238, process id 0 x 780 x, start time of application 0x01cb172b3bbefe17.»
Brand and model of the printer?
Failed application pmw.exe - pmw is associated with PrintMaster from Broderbund Properties LLC
Therefore, uninstall PrintMaster completely.
Use Revouninstaller or Utility Windows Installer Cleanup if necessary to remove the traces of the program.
Reinstall PrintMaster in administrator mode (right click and run as admin)
Uninstall printer software/drivers and reinstall everything whole again.
Tags: Windows
Similar Questions
-
Original title: notice of work stop Windows
Hi JoeBuono,
Follow the steps below:
Method 1:
Start your computer in a clean boot state and see if that fixes the problem.
See How to solve a problem by performing a boot in Windows Vista or in Windows 7
Note: Do not disable any program startup list Kodak when you perform the clean boot.
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
Uninstall and reinstall the Kodak Home Center of your computer and see if that fixes the problem.
See also: troubleshooting install or uninstall programs
Method 3:
See:
Message: "AiO Home Center has stopped working" when editing and printing photos
-
drmactivator application has stopped working
Hi Gradatim,
If you receive the DRM activator error message do the following to correct the problem.
1. click on start
2. right click on computer
3. click on properties
4. Select advanced system settings
5. under performance click settings
6. go in the Data Execution Prevention tab
7. click on TURN DEP FOR ESSENTIAL WINDOWS PROGRAMS AND SETTINGS ONLY
8. click on apply and then OK
This will solve your problem of drmactivator.
For more information follow the links below.
http://Windows.Microsoft.com/en-us/Windows7/what-is-data-execution-prevention
http://Windows.Microsoft.com/en-us/Windows7/change-data-execution-prevention-settingsHope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I got a message from someone I know who included an attachment that did not open. When I tried to delete the message several times, the program has stopped working and when I reboot Mail message is still there. Any ideas?
Hello
1. What is the exact error message?
2 have you made any changes to the computer before the show?
3 What is this problem only occurs with email?
4. what service provider or of the E-mail client that you are using?
5. what version of windows are you using?
I suggest you to provide more information about the issue. -
Iusually access my mail through the mail on my keyboard button. This button has stopped working completely, and I don't know how to access my mail at all. How can I get to my email?
Add the shortcut to the desktop Outlook for all users
http://www.SevenForums.com/tutorials/86683-Microsoft-Outlook-desktop-shortcut-create.htmlIn case you wanted to tell Outlook Express...Right click on the desktop | New | Shortcut. Navigate to "c:\program files\outlook express\msimn.exe". Click next | Click Finish. It will be a new shortcut on the desktop.Once an icon on the desktop, you can drag it to the taskbar for easy access. -
"dsca.exe program has stopped working".
At startup I get an error message indicating "dsca.exe program has stopped working" how to fix this?
dsca.exe is a Dell program used with, it of the support center and is not necessary to run at startup. Go to http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and download, install and run Autoruns. Pass the all tab. Check all the items until you find the one who mentions dsca.exe or appears related to Dell (check all the items in the list because there may be multiple entries). For each entry, uncheck the box to prevent it from start to start, and then click OK. Restart the message should be gone (and you not have lost all functionality to your system by doing this).
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Yesterday I connected my laptop and when I tried oppening a program a window pops up say "program has stopped working". I opened the control panel to start the troubleshooting, and another appeared window "Control panel has stopped working". I tried to open microsoft word and another window popped up, it is true, that you guessed it "word has stopped working". Does anyone know why all of a sudden nothing works?
Hello
try a SafeMode system restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
I tried to download a program: System Mechanic Professional 9.0 www.Iola.com
I recorded it on the desktop, right-click to run as administrator, at this stage, it starts to download but the following message comes to the screen: install/uninstall program has stopped working.
A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
Of course, nothing happens after that and I close the message. I bought this on the internet and I have the activation code. It's good for 3 pc. I put it on my desktop and it works very well. My laptop is Vista Home Premium with 64-bit operating system. Everything else seems to work fine on my laptop but I desperately need this program. Laptop is so slow and Firefox takes forever to open the pages. I get a lot of messages it does not!
So I appreciate any help you can offer.
Hi luv2shop,.
This problem may occur because of the conflict by the present security software on the computer.
I suggest you try the following steps:
Step 1: Disable security software, follow the steps mentioned below
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Important: Activate security software once everything is done.
Step 2: use the Windows Installer Cleanup utility for delete all entries that are related to the product you have installed wrong:
Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:
http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.
In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product
Description of the Windows Installer Cleanup utility
http://support.Microsoft.com/default.aspx/kb/290301
Step 3: Set the clean boot computer and try to install the program
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Important: n ' forget not the computer to start normal follow step 7 in the link.
If the problem persists, you can check with iolo for known problems
http://www.iolo.com/customercare/
Note: Make sure that (double check), you install the right version (32bit\64bit) for your computer.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I can not run dinner dash hometown hero. He will be in charge, but will not play. He said that the program has stopped working. How can I fix?
Hello
Please contact the Microsoft Community and sharing this information with us.
I'd like you try to perform a system restore to undo changes.
See the article-
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings
Note:
Perform a system restore will cancel all changes made on the computer before the show. You may also lose unsaved information as well. Proceed at your own risk.
If this is not enough, then you must contact game support for assistance.
Do not hesitate to contact us for any problem related to Windows. We will be happy to help you.
-
I tried to install Health Vault Connection. My computer, an HP laptop, tells me that the program has stopped working. It works on Windows XP and Windows 7 PC. I recently discovered that it will not work in DOS. How to get this running and how to uninstall BACK so that this program will be executed. Will affect the functioning of the laptop?
Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs
There are no BACKS to win and has not been for some time, so I don't know where you got this information.
Clean boot the PC, then reinstall HealthVault
http://www.Microsoft.com/en-us/HealthVault/tools-devices/devices.aspx
(Remove compatibility options that you maybe solved everything first)
-
Adobe CS4 "a license for this product has stopped working" (error 6)
Help, please! I used the Migration Assistant to transfer all my Time Machine backup to my new MacBook Pro. When I try to open Photoshop or InDesign (CS4), it tells me that "a license for this product has stopped working". The box suggests a reboot of the computer (which doesn't) and helpfully gives me 'error 6'. (He was 150:30 of the error, but since I tried almost everything listed here ( error: 'License has stopped working' |)) Mac OS ) he has changed in error 6) She also gave me a chance once to enter my serial number, I did, only to be informed that it was not valid.
I have disabled the software Adobe CS4 on my old MacBook. The only thing I can think that I have not tried is uninstalling software and re - install, but this MacBook Pro does not come with a disk drive, so I can't install the software of my drive.
I lost three days on it, and I have a looming deadline... so I really hope you have a solution for me!
Thanks in advance!
Tell everyone you know who owns a Mac, including Apple employees... Migration of Mac and Time Machine NOT FUNCTION correctly with the Adobe program activations due to hidden folders are not included when Migration or Time Machine make their copies
You must disable and uninstall and make a correct installation! IF you can even install the old software on a new Mac
Download & install instructions https://forums.adobe.com/thread/2003339 can help
-includes a way to go to a page to download the Adobe programs if you do not have a disk or drive
-you will need to enter your original serial number during the installation for non-Cloud programs
-Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
-Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
-Membership questions and problems https://forums.adobe.com/thread/1146459
- or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216
Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq
CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan
-which means you are trying to use CS6 and earlier at YOUR risk of having problems
-You can get CS6 and previous programs to install and run, or you can not (some do, some don't)
-Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help
Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)
-also a TEMPORARY security change https://forums.adobe.com/thread/2039319
-the guardian https://support.apple.com/en-au/HT202491
-
CS4 Design Premium I migrated to my new laptop, but when I try to enter in InDesign or Illustrator, I get the message "a license for this product has stopped working... error code 150:30" how to re-enable programs CS4? Thank you.
Could you please check the solutions:
- License for this product has stopped working error 150:30
- Error: "License has stopped working". Mac OS
- Error: "License has stopped working". Windows
Concerning
Stéphane
-
I'm using Adobe CS4 on Mac OS 10.10.5. Friday, Adobe Acrobat Pro 9.0 version no longer works with this message: "License for this product has stopped working" and the instructions to uninstall and reinstall the program. I did, but now, again, I have the same message pops up in the middle of my workflow. Nothing has changed in my program Adobe CS4/CS5.5 licensed facilities to cause this error.
What is the solution please? I found only the instructions related to Windows on the forums.
Thank you for your reply as soon as POSSIBLE.
Hi failed_spirit,
Please refer to this document KB error "Licensing has stopped working". Mac OS help.
Kind regards
Nicos -
Dreamweaver CS4: "license for this product has stopped working": error 6
I'm working in Dreamweaver CS4. Suddenly, I'm unable to use the program at all. Windows 7 is the operating system.
It opens and the load, however a white box is displayed indicating that "licensing for this product has stopped working" error 6. Then the program automatically stops.
I have a valid version of DW CS4 which I have used for years. The original DVD is here with a valid serial number always on the case.
Already I ran the "Adobe licensing repair tool: nothing helps.» I followed the procedures outlined tool until the 4th and final stage - nothing.
I need to access this program as soon as POSSIBLE because I need to update a Web site with it. Time is crucial.
Can someone please help? Thank you.
Error: "License has stopped working". Windows
Error "licensing for this product has expired" | CS4, CS5
Nancy O.
-
Cannot start indesign in Creative suite - license for this product has stopped working?
I have uninstalled and disabled my creative suite 4 on my old mac and install it on my new iMac with the Mavericks, Ive updated and recorded and other programs work, but Indesign does not start...
I get a message saying:
License for this product has stopped working
This product has a problem that requires that you restart your computer until you can run.
If you continue to see this message after you restart your computer, please contact your COMPUTER administrator or Adobe support for help and mention the error code displayed at the bottom of this screen.
Error: 5
(incase of your request, I tried to reboot)
Any help much appreciated!
I tried to reinstall completely and it seems to have fixed,
Maybe you are looking for
-
Why the sound is different when the project is exported?
Hi all. It's me again. Because you are always so useful, I need your help with another problem. I just finished a wedding, publishing and towards the end of the ceremony, the sound is fine when you work in Final Cut, but when I export, the game becom
-
Advice on the restructuring of code to avoid the downturn over time
Hi, I am a new user of LabView, you want some advice on how to better structure the program I wrote and which is used to perform a hydrostatic test arrangement. Data are collected on a module of AI cDAQ 9207 and a cDAQ 9474 module is used to control
-
This laptop is by far (on paper) more powerful than my previous E1 AMD processor powered notebook; but since I got it (it is refurbished, but in the warantey of 90 days as I've had it less than 2 weeks) it was much less responsive than my laptop prio
-
Bluetooth and the gesture of the wrist will not shut off
Only has the SW 3 for a few days but have paired it, cannot get the Bluetooth to stop scanning. I used the screen turn on BLUETOOTH initially but the BLUETOOTH TURN OFF does not appear in the menu - just keep looking for nearby devices, this must dra
-
Pavilion dv5 put on hard drive?
Pavilion dv 5 2129wm has no screws on the back and the icons are not self. What Panel for I need to open? How can I open it? The HD self-control in the bios can not find the HD (nor can an independent control HD disc). The manual dv 5 any help