Q. how long it takes to load the I phone 6 s
My i phone take a long time to be fully charged. Today morning, I observed that his take 1 hour to 5% of the charged battery.
There are many factors that can determine that. Try to activate the low power Mode and see if it perceives a faster: settings > farm > Low Power Mode (assuming you are using iOS 9). You can also try the other tips on this page: http://www.apple.com/batteries/maximizing-performance/.
If this does not work, you can try some troubleshooting steps: restart your iPhone, iPad or iPod touch - Apple Support. If it still does not work you can try a restore: http://support.apple.com/kb/HT1414.
If none of this worked, there may be a hardware problem, then you should make an appointment with Apple to have watched it, or send it to: http://getsupport.apple.com. You can also try to find Apple authorized repair close to you on this page centers: http://locate.apple.com.
Tags: iPhone
Similar Questions
-
How long does take to load the Apple Watch?
Before you buy the Apple Watch, I would like to know how long it takes to load completely.
See: http://www.apple.com/watch/battery.html
Charge time
About 1.5 hours to 80%
About 2.5 hours to 100%
Testing conducted by Apple in March 2015 using pre-production Apple Watch and software associated with an iPhone using the pre-production software. Load times are from 0% to 80% and 0% to 100% using the MagSafe inductive charger included. Charging time varies depending on environmental factors; actual results will differ.
You can restart the watch earlier after the charge, if the battery is not fully charged. Restart requires at least 10% reserve battery.
-
How long does take to load lightroom? and how to pause the download and start later?
How long does take to load lightroom? and how to pause the download and start later?
Hi AdobeIDBailey,
The time required to download the product depends on the speed of your internet connection.
The download cannot be suspended once launched, it will stop when you are finished, or if you cancel it.
If you see it is stuck or not moving not quite so if please cancel the download and refer to the steps below and try the download again: (these steps will also increase the speed of downloading as security software can also slow your downloads)
1. turn OFF any security software or firewall installed on your machine temporarily
2 - CUT the browser protection tools or add as well as for now.
Let us know if that helps.
-
How long does take to load know last good configuration?
Waited about an hour. How long does take to load know last good configuration?
It should not take more than he does start normally. The Configuration of the property last known (LKGC) is a copy of the control set that was used last successfully start the machine, the boot is only considered successful once you log on to the computer. When you connect successfully on the control set used to start the machine is copied on a numbered control (HKEY_LOCAL_MACHINE\SYSTEM\ControlSetnnn) the value and the value for LastKnownGood in the HKEY_LOCAL_MACHINE\SYSTEM\Select is updated to represent the LKGC. Changes that you make after you log on is not registered in the LKGC.
In general the LKGC is useful when installing hardware or drivers or when incorrectly configured services prevent Windows to start. On an operational computer the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet represents this set of materials and services. It may be useful:
Information on the last series of well-known control
What are control sets? What is CurrentControlSet?
John
-
How long does take to install the creative Cloud Desktop application? It seems to take ages?
Make sure that you have enabled cookies and clear your cache. If he continues to not try to use a different browser.
-
How long does take to receive the cert.
I wrote my test and I passed. It is on more difficult things I've done.
I was told that during Setup and config covering 80%
I think that its more close as 45%. I spent two months reading material and exceed the blue print.
All of you who I'm happy on my collar. My only question is how long does take to receive the VMware certification from the time of the test?
Congratulations! You should get an email 1-2 weeks after the exam, asking you to confirm your delivery address, it then takes about 4 weeks before you receive the welcome pack. Your VCP will appear on an electronic transcript once you have verified the address of delivery too.
Scott.
-
How long it takes to have the activation of the e-mail from Adobe for the Cs5.5?
How long it takes to have the activation of the e-mail from Adobe for the Cs5.5?
There is nothing like Adobe activation mail... »
You must contact Adobe support for the given account to zero activation... You can contact by Chat or phone.
-
How long does take to install the update of El Capitan?
How long does take to install El Capitan? Attempt to update DL to the Mavericks, but there is no progress bar or another indication of xfer. There is a box that says "Download" - but this shows that at least 40 minutes.
-
How long did take to complete the project of automated deployment vm?
Pete, referencing your practice (Automation of VM deployments) to Nationwide with Enigmatec, how long did take?
Thank you!
Steve
Hi Steve,.
The project was divided into several phases, and due to a number of external factors such as the lack of capacity in data center, the Portman merger delayed several times
So I tried out as real time devoted to the project. I recall it went something like this:
POC, about 6 weeks - this where we took the ideas we had, obtained approval of the direction to proceed with the POC and then returned to management on its success
- Definition of needs - 2 days
- Define the criteria for success - 4 days
- Deploy and test POC environment - 22 days
- Report output - 2 days
Submission of project about 19 weeks
- Present the project for the approval of resources and budget - 4 weeks
- Selection of provider - it could have been a call for OFFERS, but because the CEP has been a huge success escaped with a "market assessment report" submiiting of 6 key players and my recommendation has been approved - took 2 weeks. A DP would have taken 3-6 months
- Definition of the product - it was basically a requirements document, took 6 weeks to review and approve
- Accept the contract for the product and the Computacenter for services was 3 weeks of terms with partners - Enigmatec
- Accept the detailed project plan - 4 weeks
About 50 weeks of project delivery
- The infrastructure plan and design phase - takes about 12 weeks
- Operations planning - takes approximately 12 weeks, from what I remember this started about 3-4 weeks in the design work
- Deploy and test - took about 4-6 weeks
- QA (pre Prod trial) took 3 weeks - including filling them and signing off the coast of the initial implementation of the support plans
- Driver 8 weeks
- Final deployment 12 weeks
- Transfer to operations in 1 week
Total elapsed time 75 weeks
-
How long does take to load up one I watch
How long does take to reload a new one that I watch ready to be used for Christmas
Hi Bex
Charging time is approximately 2.5 hours for a full charge from 0-100%.
-
A satellite - how long does take to see the extended warranty?
How long should wait to show in details after registration of warranty extension
Hello
Usually, you should see your registration information after the registration of the guarantee is over
You can wait a bit, but generally, it shouldn't take too longCheck the details of record again on the warranty registration page you can find the option: * record retail research *.
There, you can search for and/or update the guarantees that you have previously saved. -
How long does take to reactivate the subscription once payment has been updated?
So I've recently updated my payment of only a few days after my subscription expires. The pop-up when I went to use one of the applications said wait 15 minutes once the payment has been updated. I was able to do this but still cannot access my applications. It is time sensitive, I have a project to be completed within 24 hours. No one knows how long takes of reactivation of the account?
Hello
If the subscription has expired and then the payment details have been updated so it may take 24 to 48 hours to reactivate the subscription.
See, survivor or restart your creative cloud membership , manage your creative cloud membership
To get this dinner quickly I would recommend you to contact support by phone or Chat team.
*Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.
Let us know if that helps.
Kind regards
BANI
-
How long does take to deploy the config on 4240?
I noticed a config very long deployment on 4240. In CLI I have several changes to the configuration of virtualSensor, answered Yes at the prompt 'Apply changes?' and it takes about 20 minutes to start sniffing interfaces (traffic started) again. That means the box do in the meantime and how to shorten that time. I have about six hundred signatures to listen (another integrated config) - can be the bottle?
The sensor is most likely regenerating tables to cache regular expressions.
Rather than analyze independently each signature regex when a package arrives, it will be rather combine regular expressions of all the signatures in a giant regex and generate a state table and then write the new status table in the disk/compactflash. (We call these tables to cache regular expressions).
When you enable or disable a signature, or when you add custom signatures, it should regenerate the cache tables, because this combined regex has now changed.
(NOTE: Version 5.0 has major improvements in this area.) Cache tables are now delivered directly from Cisco for standard signatures not removed as part of the signature update process. But if you add custom signatures or Kimbo signatures that Cisco has retired, then same 5.0 can take time to make the changes)
Creation of these tables is very intensive CPU, so the sensor is not able to monitor the traffic while the tables are created.
So it's best to save changes as toggle, retirement/unretiring, change regular expressions and create customized for the time signatures where you can afford the downtime of the sensor.
NOTE: Modifications to gravity, actions, recaps and filters do not affect the cache tables and should be able to be applied in a few seconds.
-
How long does take to download the Photoshop trial with standard speed WiFi?
The page that States that Photoshop is the download now repeat for 30 minutes now without any indication of progress or completion. It's a little frustrating.
You must install the application of office cc, https://creative.adobe.com/products/creative-cloud and use the application to install your trials/subscriptions.
-
How long does take to update the BIOS on a MIni 110?
So far, my computer has worked with the message "if it please do not turn off or unplug your machine. Installation of update 1 of 1 "for more than 6 hours. (It is still in progress!) I'm currently in Shanghai, then holding a store of the computer seems unlikely, but I need this machine. (Fortunately, I can use a computer at the University for some things, but not all.)
I'm sure it was an update of the BIOS. It finally finished the update after nearly 20 hours.
Maybe you are looking for
-
Measure the temperature NOR-4851 and TI TMP275 I2C
Hello world I want to read the temperature of a Texas Instruments TMP275 (http://focus.ti.com/lit/ds/symlink/tmp275.pdf) sensor I2C with a NEITHER-4851. After a few tries, I was able to read the correct temperature: in the next step, I want to incre
-
Hey all,. I worked on Labvoew little more than a year now. I want to prepare for the Certified LABVIEW Associate Developer (CLAD) Exam.I looked for help on the Forum and found that some claim is obsolete. As in http://zone.ni.com/devzone/cda/tut/p/id
-
When I try to access my Inbox for outitgoes webmail, I get a message saying nested no uid in result of server really not necessary to sort the results. I can connect fine and records, sent access etc, but not my Inbox, what someone has any ideas how
-
BitmapField.setBitmap not acting does not go as planned.
Hello. I have a class that derives from BitmapField. The intention of this class is to upload a picture on the net and update the display once the image is loaded. Code is pasted here: http://pastebin.com/f5b4de367 The reminder occurs in public void
-
BlackBerry BOLD 9700 smartphones - Messenger of BB will not play sound when on the home screen
Bold 9700 I have problems with my BB Messenger doesn't play does not sound, but always vibrant, when on the home screen. It will play the sound when in other applications, but not the home screen. I have the sound to play "always." Any help would be