QImage QPainter include statement gives error

Similar Questions

• Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied.

  Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied. You do not have the appropriate permissions. I am the administrator. Change all the complete control. Any other suggestions? Possible virus?

  Hello

  You are unable to download the updates?

  Try the following steps to resolve the problem:

  Method 1: Temporarily disable any security (including firewalls) software and check if the problem persists.

  Check out these links:
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable
  your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are
  connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  See the article mentioned below and run the Fixit diagnostic tool to fix the error 643.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
  http://support.Microsoft.com/kb/958052

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows give error 0x8DDD100A during the validation of windows Xp Professional SP3

  Windows give error 0x8DDD100A during the validation of windows Xp Professional SP3

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: sync clock error
  Validation code: 10
  Code of Validation caching: n/a
  Windows product key: *-* - XC4Q9 - W7RTD-7Q8G6
  Windows Product Key hash: Py7sqDcPBx6etfYqog5bPl/YZ9E =
  Windows product ID: 76487-OEM-2211906-00826
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 5.1.2600.2.00010100.3.0.med
  ID: {5DBB45BE-2BA5-44AD-92B3-2FE66CB59B95} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation of diagnosis: 025D1FF3-230-1_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: Yes
  Version: 1.9.9.1
  WgaTray.exe signed by: n/a, hr = 0x80004005
  WgaLogon.dll signed by: n/a, hr = 0x80004005

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-230-1

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {5DBB45BE-2BA5-44AD-92B3-2FE66CB59B95}1.9.0027.05.1.2600.2.00010100.3.0.medx 32*-*-*-*-7Q8G676487-OEM-2211906-008262S-1-5-21-1232634059-1876962941-2206964983Sony Corporation,VGN-AR11MPhoenix Technologies LTD.R0130J620060626000000.000000 + 000Sony Corporation, Sony Corporation, Sony Corporation2BD13F07018400FE08090409New Zealand Standard Time(GMT+12:00)02Corporation SonyVAIO VGN - AR series109

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  Marker of the BIOS string: 1FF90:Sony Corporation | 1FF90:Sony company ITCNC
  Marker of OEMBIOS string. DAT: Sony Corporation, Sony Corporation, Sony Corporation

  Activation 2.0 data OEM-->
  N/A

  Check your region settings, Date and time in Control Panel - you are a clock synchronization error.

• While playing some games I get different blue screens. Include messages: WHEA ERROR INCORRIGIBLE and a common one is CLOCK WATCHDOG TIMEOUT.

  While some games I get different blue screens and I can not understand what causes them, this only happens when I play a bit of some games. Include messages: WHEA ERROR INCORRIGIBLE and a common one is CLOCK WATCHDOG TIMEOUT. I tried a new install of Windows 8 and this problem still occurs these games has worked on the same computer with Windows 7.

  Original title: Windows 8 BSOD

  Tom

  They have been linked to the material (since obviously you re-installed), two of them were corrupted because of the speed of the accident.

  If you're a clocking over please return to default (overclocking pushes the material beyond the design of the ists)

  Please run a malwarebytes scan before starting on the underside

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

  Stop 0 x 124 is a hardware error
  If you are overclocking try to reset your settings to standard processor and see if that helps.
  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• IMPDP policies gives error "policy already exists.

  Hello
  I did not all strategies in my db and when I run political IMPDP only using network_link, he said, political already exists but it is important all of these policies. Why do I get these errors and how to avoid them?

  Hello

  Well yes - I have reproduced it. The problem is that the same information is exported 3 times. Once for rls_policies on tables, once for policies on views and one for policies on synonyms. Because it is exported 3 times, it it then imported 3 times. Once for real, and then two times with politics are errors. This looks like a bug to me and is reproducible in the latest version. The policy you have provided match a table and must be exported in the

  DATABASE_EXPORT, SCHEMA, TABLE, RLS_POLICY

  path. The problem is that it is also exported as a policy to display

  DATABASE_EXPORT/SCHEMA/VIEW/RLS_POLICY processing object type

  and a policy of synonym

  DATABASE_EXPORT/SCHEMA/SYNONYM/RLS_POLICY processing object type

  If you know that all you have are policies on the tables, you can fix this by chaning your include statement of:

  include = rls_policy

  TO

  include = table/rls_policy

  I call your Oracle representative and ask them to fill out a bug for this report.

  Thank you

  Dean

• On a windows 2003 R2 SP2, gives error 1053 SNMP service startup

  On a windows 2003 R2 SP2, start the service SNMP gives error 1053 (below)

  

  In the event log are event ID: 7000 & 7009 back (below)

  

  

  Already tried: https://support.microsoft.com/en-us/kb/886695 (check the "allow service to interact with desktop").

  I have also run the Windows updates for all high priority updates, replaced the files %windir%\system32\snmp*.* with those of another R2 SP2 server that is not the problem (after rename the original to the *.old files & copy the same files in the folder DLLcache so SFC would stop interfering ;)) and checked for other errors that may show a reason for this - the only thing that I can connect to it) , it is that services IISAdmin & GoogleUpdate (gupdate & gupdatem) having the same problem, but unrelated to seams...

  TNX in advance for any response.

  Kobi

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• my computer gives error 80080005. Can not find new downloads.

  Who can help me. My computer gives error 80080005. He can not find new downloads.
  I used Windows Vista Edition home premium.

  Peter

  Here's a huge thread on the same topic. It might be useful. http://social.technet.Microsoft.com/forums/en/itprovistaapps/thread/21e0dd42-44AE-4E07-9A9A-b0a3263345ec

  Marin

• W3 - 810 driver Power State failure error (BSOD)

  I have a W3-810 Iconia I've upgraded to Windows 8.1 and Windows 10. During a recent update to the 2016 office, I had a blue screen and an error message that a failure of State driver had taken place and the computer needed to restart. After a few moments, the computer restarted and I was able to complete the installation of Office 2016. I remember getting this error during upgrade to Windows 10. Recently, while watching a YouTube video, the Tablet locked up and I got the blue screen again, with the same "Driver Power State Failure" error again. I check the Device Manager and noticed that in the "system devices" all of the "Intel platform dynamics and thermal framework (DPTF)" associates pilots had yellow flags indicating that the drivers did not work properly. When I tried to update the drivers I get a message that the latest drivers are installed.

  Someone at - it recommendations to solve this problem? Should I uninstalled all the drivers DPTF and reinstall? Thank you.

  Update: I drove all DPTF drivers in back to version 6.2.9200.30457 Device Manager and then restarted the computer. I tested the computer to see if I could cause a BSOD pilot State failure occurred earlier today and it does not happen again. I hope that this solves the problem. Thank you.

• I had a request on Windows Live Solution center and request still pending, cannot not find post or even open window Live Solution gives error!

  request lost post on window for e-mail folder

  I post a request on Windows Live Solution center about 27 July give my email name - and request still pending, not found or even open window Live Solution gives error!

  the application in question was: when I put in order my window live folders mail had become unstable, I remove a double folder which appear empty, I moved subfolder of a folder and subfoulders lost.

  I've lost Business-Optus DSL-city of Luigi Swan - Bank - various - Computer.They contain information that was not save on my important document

  My request was if possible to recover them. Happened this week is so cool to be given there.

  Thank you

  Luigi

  Hello

  The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/product.aspx?ProductID=10

• shared folder t could not access gives error that you have not permission to use network resources

  folder t couldn't access gives error that you have not permission to use network resources while I connect with administrator

  Hello

  1. were you able to access the folder shared earlier?
  2. don't you make changes on the computer before this problem?
  3. What is the full and exact error message?
  4. how the computers are connected?

  Please answer these questions and provide us with more information. This could help us help you better. However, you can view the Sub articles that may be useful.

  Error message when you try to access a network Windows XP computer: "you might not have permission to use this network resource".
  http://support.Microsoft.com/kb/913628

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP
  http://support.Microsoft.com/kb/318030

• Operating system does not start; F11 gives error.

  HP Pavilion dv7

  0xc000000f error code

  -does not start the o/s

  -not boot to safe mode (or whatever it is)

  -System gives error F11 recovery

  -friend did not restore system cd

  -OS is Windows 7

  I removed the hard drive and slave it to my office (using 2.5 USB cable).  The files are accessible except the \USERS directory is MIA.  If I can see the C: and D: (recovery partition)-

  Can I run the program on my desktop computer to create the recovery CD?  (faster you proceed your order/delivery/arrival)

  Other suggestions?

  Thank you...

  ACETech says:

  p/n: NM295UA #ABA

  Installation media (recovery dvd) was not made by the user.  That's why I asked if I could make running the hard drive from outside the laptop (enslaved at my office).  Thanks for the info, I can't do that.

  Will be there without you say the o/s?  It is not sure that vista or 7 32-bit or 64-bit.

  Looking at his hard drive Windows and a Linux flash player, I don't see his user under the \users Directory directory.  It of funny, just might be blown away...

  It's Windows Vista Home Premium 64-bit with Service Pack 1.

  Here link to the specs page.

  Best regards

  ERICO

• Windows Search 4.0 service used with XP Professional SP3 gives error ID: 3100

  Windows gives error ID search service: 3100 category: Gatherer

  Can not initialize filterhostproces. Will be stopped.

  Details: Invalid access (0 x 80070006)

  It seems to be the cause of my computer is very slow sometimes.

  I recently also received a blue screen

  1 stop (0 x 00000024) Internet suggested that this could be a NTFS problem

  2 stop (0 x 00000077)

  I don't know if there is a relationship. Could this be a virus? I use Bitdefender and it gives no alarm.

  Hi Joost23,

  The question associated with Windows install, I suggest you run the patch from the link below: Windows search does not work and research is slow or stops: http://support.microsoft.com/mats/windows_search/en-us

  If this does not help then you can uninstall and reinstall Windows search 4.0 on the computer.

  Follow the steps below to uninstall:

  a. click on start

  b. click Control Panel

  c. Select Add or remove programs

  d. place a check on 'Show updates'

  e. you will see Windows Desktop Search 4.0 and uninstall it.

  Reinstall back, you can see the link below:http://www.microsoft.com/windows/products/winfamily/desktopsearch/choose/windowssearch4.mspx

  For the problem with the blue screen, you can check the link below: you receive an error message on a Windows XP-based computer: "Stop 0 x 00000077" or "KERNEL_STACK_INPAGE_ERROR": http://support.microsoft.com/kb/315266

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to turn on windows defender gives error

  Unable to turn on windows defender gives error

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• I try to run windows update and it will not update gives error code 80070005

  I try to run windows update and it will not update gives error code 80070005, I also ran fix and it tells me that it is fixed but it is not getting the same error code when I try to update after running it help please?

  Hello

   
   
  
  1. which Microsoft Fixit did you?

  2 have you installed new hardware or software before the show?

  3. who is the antivirus installed on the computer program?

  4 update you are trying to install?

  5. are you logged on as administrator on the computer?

  
  If this isn't the case, I suggest you to log on as an administrator and check for the issue.
   
  Method 1:
  One of the other reason for the 80070005 error is caused by software running on your computer security.
  Temporarily disable the security software on the computer and see if that makes a difference.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
  I suggest you perform the steps described in the article:
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003
  This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates. I suggest you to follow the steps and check if it helps.
  
  Method 3:
  Perform a clean boot, and then check if it helps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  See also:
   
   
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   
   
  I hope this helps.

• Windows updates give error 0 x 80096001.

  Original title : Automatic updates mean that windows cannot check the updates.

  Try to run windows updates give error 0 x 80096001.

  Runs the tool Windows gives the same error.

  Did not work for a while, no miracle I can find work.

  Hello   Method 1: Run the fixit given in the following link and check if it works. How to reset the Windows Update components? http://support.Microsoft.com/kb/971058 Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: (http://support.microsoft.com/kb/322756) how to back up and restore the registry in Windows Method 2: Perform the clean boot and check updates. How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 http://support.Microsoft.com/kb/929135 Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.   Method 3: Run the Analysis System File Checker and check if this solves the problem. See the following article to do the same thing: http://support.Microsoft.com/kb/929833   I hope this helps!