Qosimo F20-137 will connect not wireless Orange livebox

Similar Questions

• Qosmio F20-137 will not system restore after the process

  My F20-137 will not restore the system after going through the system restore process. The parameter for the restoration of the system is not in the off position too. Someone there might help me?

  See you soon
  James

  Please check this thread on the Microsoft System Restore tool.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19847&MessageID=72814

  You will find several links to useful pages.

• want dv6-7214 will connect without Wireless - N, even with the replacement of the wifi card.

  Two routers, linksys e3000 and dlink dap1522, both running only thread-802 n wap2 personal

  (also fails with encryption disabled)

  HP dv6-7214 will connect or wireless-N.

  Other wireless-n devices all connected, like the samsung galaxy, sony viao vista.

  Dialog Configuration-protected connection recognizes WPS-Wireless wifi connect info, but still fails.

  Disable bluetooth, no effect.

  Diagnostic HP online support a wireless card problem, sent a replacement wireless card.

  Not installed, no improvement. Same behavior.

  Two dv6 wireless cards will connect two routers if G 802 eneables. Blutooth also works.

  All hp and windows updates installed (before all this and checked again after the new card installed).

  System always runs from as main player c. HP 750 g drive msata ssd drive as 2nd.

  (but probably not relevant,?)

  System for 2 weeks, just the windows 8 and a couple of installed items.

  Wireless-N has never worked, it not connected Wireless-g. G always work N never works.

  It works for EVERYONE on the Envy DV6-7000 series with windows 8?

  Windows 8 makes * beep * almost impossible to see how an adapter connects.

  You must go to the file Explorer, network properties, click the wi - fi connection,

  and look at the speed of connection. If its 54 Mbps, its G connection protocol.

  You can also configure the router on one N, see if it can connect to all.

  I just two bad wireless cards in a row, or am I missing something?

  Provided with the wi - fi - model Ralink RT3290 card?

  Thank you for posting if you are sure that you can connect dv6 win8 wireless-N, I would like to know

  If it still works.

  Thanks for your time.

  First of all, thank you for the Nice fellow who took the time to answer.

  After several hours with HP support, we have reloaded windows as a last resort.

  This fixed the problem of wireless-N with the ralink wireless card.

  I have created the restore point, applied updates (windows update) via the hp support assistant.

  Eventially has all the recommended updates and ended with several update option.

  Make a restore point

  Load the update of Microsoft as an option for ralink (975 k no id #), he again DEFEATED Wireless-n.

  Thank you MesS!

  Once loaded, it shows in the history of the update, but has no way to uninstall it.

  Also, no way to uninstall from the Programs window.

  Fortunately, I had a restore point.

  ===

  MS Forum:

  Try this driver from hp support.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4132&swLang=13&mode=2&taskId=135&swItem=ob-113862-1
  I have the same problem after recent Windows Update the Ralink driver. The drivers of hp seems to work very well.

  If you're stuck with this issue and do not want to wipe your drive and reload windows,

  You can try the above driver or the driver suggested in the other response.

  I don't know how to remove the fake ralink against MS update.

• F20-137: Bluetooth does not work if connect my mobile phone

  I recently bought a F20-137 for my son and when I hack with her at Christmas bluetooth apeared in configfree, but today I decided to try and connect my mobile phone via bluetooth and there is no bluetooth option in configfree where it should be according to the configfree help file.

  It's like bluetooth is not yet installed.

  someone knows how to solve the problem? I tried to look for drivers for my model of laptop bluetooth stack, but it was not available on the toshiba site and configfree versions I found on the toshiba site are and build older than the version already installed.

  Hello Luke

  According to the specification for F20 - 137 the unit doesn't have Bluetooth. To be sure to check if you can find the label of BT in the lower corner.

  It looks like http://support.toshiba-tro.de/KB0/FAQ35007I001WR01.htm

  Good bye

• Qosmio F20-137: WLan connection falls very quickly from 54mbs to 1mbs

  I connect to internet using my F20-137 via a linksys g wireless router.

  The router is in another room (25 feet and on two walls) for the laptop computer and the connection very quickly falls to 54mbs to 1mbs.
  Is it possible to maintain the speed of connection or is it because of the distance. An external wireless card help?

  @tleggate

  Please take a look in this thread.
  The user electorchain has provided a very nice description about this behavior WLan:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21556

  Throughout the stanislaus735 is right and it confirms the information given by chain ;)

• Brand new C309g connect not wireless enabled wireless security options

  Printer connects via wired ethernet. I can use the http utility.

  Printer connects through secure wireless connections.

  Default printer in the autoconfig (169.xxx) when connected via WEP (both open and shared), does not connect with an IP address manually. Can't access http utility.

  Printer not autoconfig even when connected via WPA-Personal - instead only says: "no link found."

  The printer is in the clean room with the router.

  All OTHER wireless network devices work perfectly and deal with security changes.

  I have inherited the network devices that make me want to run with WEP.

  I ran the HP Network Diagnostics. It can access my router very well. It does not find the printer.

  Router is D - Link DIR-655.

  I jump through the right hoops - router to refresh, restore the default settings on the printer, etc. All other wireless network devices work correctly.

  I like to shoot a 'office space' on this brand new printer - save me please do!

  -mooi

  Oops, my mistake.  Thanks for pointing it out.

  Another idea is to make sure that the firmware is being updated on the router.

  Moreover, since the control panel of the printer: Setup > network > wireless network Test.  It will be the radio of the printer self-test.

• Changed a WPA encryption. Office connect not wireless, ethernet cable.

  Recently changed encryption wi - fi WEP to WPA, existing home wireless network. Change of wireless connectivity for laptop computer and printer is fine, but the Office will not connect wireless, ethernet cable.

  To your XP computer's wireless adapter supports WPA?  Many as these old maps that were made before that WPA has fully adopted as a protocol.  There are also various types of WPA, not all compatible with each other.

• Connection not wireless printer so can use wireless.

  PC is HP Elite e9150t, Windows 7, IE 8.  The printer is HP Photosmart 7960, Jan 2004, no wireless stuff.  If I connect HP Q6301A #B1H, wireless-G print server (small little design HP sells for $60), via the USB port on my printer I will be able to use this printer wireless?  Sounds too easy, right?

  If not, how to best use this printer wireless?

  Or do I have to plug the USB directly to my PC?

  PrintDoc, thanks for the reply and suggestion.  In my mind - just trying to get away at low cost.

  Phil

• HP Photosmart C4780 connects not (wireless) on Mac or wireless network

  Sorry for the long post, but please someone help me!

  I bought my new printer a few days (actually 14th) and began to implement on my MacBook Pro with my Wi - Fi, which is routed through a Linksys router and mainly through my desktop computer (a PC with Windows XP). I used the CD that came with the printer to set it up on my Mac and it has set up the fine by USB, but when I try to set up the wireless, I get the following message:

  "Device not connected: to configure the network settings for the selected device, please connect via USB temporarily." The device can be disconnected from the USB once the network settings are transferred. »

  I reconnected and got the same message over and over again, so I decided to set up on my desktop computer instead. This does not work either and I got the same message on my desk I have on my laptop. Uninstalled on both computers, reinstalled and I STILL got the same message. At this point, I'm about to throw all the electronics in my bath tub and be done with them but on the contrary, I checked (and double checked - and triple checked) my router via my browser settings, fact that I know the SSID and the password and reconnected to the network through my laptop... Once again, the same message. I tried the network installation of push, the installation of the network PIN, I feel I have tried everything! Probably miss me something small, but eyes fresh is always an asset.

  Can someone help me? I printed a Test report of the network so that a Page Network Configuration and settings I received both... if need be, I can post the information from my router, in order to verify to implement, but after two days of trying to implement something that should have taken ten minutes (sometimes) I'm at my wits end.

  Network Test report:

  "Your HP printer cannot find your wireless router. Check our wireless router has power. Make sure that your network (SSID) HP printer name exactly matches your router (SSID) wireless network name. If they do not exactly match, run the installation of the wireless network to set up your HP printer. »

  How to change the network name of the printer to match?

  Summary of diagnosis:

  Wireless on: PASS

  Wireless work: PASS

  Find the network name (SSID): FAILURE

  Security: PASS

  The printer settings compatible with the wireless router settings: does not work

  No filtering: does not work

  Related: Does not work

  Signal strength: does not work

  Other networks detected matching your network name (SSID): does not work

  Detected wireless networks: 1

  Downlink Count: 0

  Channel: Does not work

  Although I was given my SSID (which does not match my home network - but how can I change this?) and my MAC address (I guess for the printer), so I didn't have the IP address of my printer has no way for me to get online to check all the settings! Is there another way to get this IP address?

  Summary of configuration:

  Communication mode: Infrastructure

  Authentication type: open

  Encryption: no

  ______________________________________________________________

  Network Setup page:

  General information:

  Network status: offline

  Type of connection: no

  URL to Web server integrated: http://0.0.0.0

  Firmware Version/Hostname/serial number were all given

  Admin password: not set

  802.11 wireless

  Hardware address (MAC): data

  Status: disconnected

  Port 9100

  Status: enabled

  mDNS

  Status: enabled

  Service name: Photosmart C4700 Series [6 last digits of my MAC address]

  SLP

  Status: enabled

  Microsoft Web Services

  WS discovery

  Status: enabled

  WS Print

  Status: enabled

  PC connected (s)

  Address IP/hostname: (nothing is here) Time since last access (mm: SS): (nothing is here)      

  Number of 802.11 networks discovered: 1

  (my correct information of wireless network is here, including the SSID, Mode (Infrastructure), BSSID, Channel, privacy (RSN), Auth (WPA - PSK), Encrypt (TKIP-AES), Signal and WPS (no))

  Help!

  Did you read this on your Verizon FIOS router? : http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Connection-problems-with-Verizon-FIOS-Actiontec-routers/td-p/892967

• 8 flow HP will connect with wireless mouse

  I'm 8 HP flow. I need to get a wireless mice for my (Windows 8.1) Tablet PC for an upcoming event.
  
  First of all, I need to know if the 8 workflow HP will work with a mouse and display (the mouse pointer) on the computer screen.
  
  Second, I need to know what kind of mouse will work with it (Bluetooth, wireless, wired, other).
  
  And finally, how do I connect the mouse with my Tablet PC.
  
  Thanks in advance for your help,
  John W
  
  

  I have 8 HP flow, recently I bought HP T800 Bluetooth Keyboard box. The only thing that was missing was the mouse. I tried to use the usb wireless mouse, but used only available for the receiver usb micro usb port mouse.

  The best solution for this is to buy the bluetooth mouse wireless, available with HP and Logitech M557.

• Qosimo F20 - try to connect WLAN - no dial tone

  Hello

  I have trouble connecting through my D-Link wireless router my PC say that wireless is connected with good signal but when I try to log in it tells me there is no tone.
  If I plug the speedtouch modem I can connect immediately, any suggestions

  In my view, there is also a configuration issue with your router.
  If the laptop connects to the router so all should be good with the laptop and the wireless network card. In this case, the problem occurs at the other end of the line; between the router and the connection to the internet provider.

  I also think you should first check the connection of the router configuration.

• Printer 4700 shows that it is the wireless. It will print not wireless. I used all the information hp

  Printer 4700 shows that its wireless, but it does not print wireless. Information for this set up has been tried

  seversl time and technical support have yet to fix.

  My router has inside and one ip address.

  Help would be a plus.

  Okay, because the printer seems to be on the network, the problem is with your computer.  What operating system?

• Updated, install; will connect not to 'update server'. No button help don't know not what/how to do/repair

  Firefox keeps telling me that there is a significant update, when I try to install the system window that says "Download Firefox" w / indicator blue/white just rehearsals on supposedly 'Connection to the server to update.' below. Window has only a pause and a hide option. Computer is two months old.
  Thank you

  Try the alternative and more simple way to download from here

  • getfirefox.com

• opmn will connect not not being written

  Hi all
  We are facing a problem.
  No log is written in the opmn/logs directory. It was written correctly until 4 December and then stopped suddenly.
  Y at - he of the configuration files that may have been affected.
  Best regards
  Brinda

  Did you try to stop opmn and procs, rename or remove the old logs, restart opmn and procs and see if newspapers are written again?

  Also the file system or a hard drive is full?

  Greetings.

• Unable to connect through wireless F4580: "unable to retrieve the IP.

  Hello

  I live in France, where the F4580 and trying to connect wireless.  The printer works fine when connected via USB, but I can't make it work wireless, HP installation wizard gives me:

  IP address: impossible to retrieve the IP

  Subnet mask: Impossible to retrieve the IP

  Default gateway: failed to retrieve the IP

  Preferred DNS server: unable to retrieve the IP

  Auxiliary DNS server: unable to retrieve the IP

  I use a MacBook Pro with Snow Leopard on an ISP Internet Orange Livebox. I saw some issues autour, but none exactly what I have with the same configuration.

  Filtering of Mac addresses: a possibility, but other laptops are able to connect to this wireless with key security without problem. similar here: http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Wireless-set-up-HP-F4580-vs-Orange-Live... but also seems to be PC

  Orange Livebox problem: question mentioned here: http://livebox.tomhallam.co.uk/tutorials/how-to-install-a-printer-to-your-livebox-liveprinter.html but that seems to be for a PC

  Question in Snow Leopard: is not compatible software for SL? I see this: http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/C4780-Snow-Leopard-Airport/m-p/174198/h... but that's a different printer model

  Issues related to the:

  How to find the IP address of my printer?

  How to find the MAC address of my printer?

  How can I print my network Config page?

  Of the ideas there?  Any help is very appreciated.

  Many routers-wireless Orange Livebox require that press you a button to add a new device to the network.  The button is probably located at the back of the router.

  I think we should start over.  Try the installation process of the printer F4580 using the driver from www.hp.com located here.  Once it scans and detects the printer, press the Connect button on the back of the Livebox wireless router.