Qosmio F10: Monitor screen looks like a photo of Andy Warhol

Similar Questions

• Qosmio F10; White screen at startup

  About a week ago my laptop starts with the screen does not. Strange! Everything seems to work fine, power lights on the hard drive whirring away etc but nothing Visual. After having read the manual I touch FN key and f5 and the screen appeared. Now there is however a noticable difference in the quality of the image. (Fonts appear blurry) Each time cell phone lights up I no longer get the graphic qosmio that appears and the screen are black for about 30 seconds before desktop appears. I also noticed that when I ran the Qosmio presentation a white band about 50 cm wide appears upright to the bottom of the right side of the screen that looks like a vertical taskbar. Notepad is just 10mths old still under warranty and with "very little high"especially used for wireless internet access. Any help would be welcome, thanks in advance.

  Your Qosmio seems mode clone (tv + tft).
  Right-click on the desktop. go to display properties. Last tab on the right. Select the proper resolution.
  Then press "Advanced" on this tab. Go to the tab 'Geofrce FX5700' select Nview, then select 'standard' instead of Clone. Press on apply.
  It should solve your problem.

  Or easier, I've just thought about it, press Fn + F5 until the selection is only your TFT screen.
  Later,.

  Alcahest

• My MacBook Air screen looks like "safe mode".

  I ran diagnostics & everything checked. I've upgraded to the latest operating system. The display still looks like crap. Can it be some setting? I'm not a geek (but I gave birth to a few) so I would appreciate some advice on where he can blame. OH and I just upgraded to el Capitan, hoping to get rid of some malicious software, but it's still there. Can this be the problem, I first have to solve?

  I would get rid of the malware in the first place, because in general it is very annoying to have on your computer (I guess you get all sorts of pop-up windows or your computer is idle). It is also possible that it influences of various parameters, display for example settings. What is the malicious program, you've found? Have you tried to run Malwarebytes to remove it?

  You can get Malwarebytes here (it's free): https://www.malwarebytes.com/antimalware/mac/

  If Malwarebytes doesn't help, don't worry, you can always remove it, it just means that you need to find the files to remove yourself. Tell us what malicious software you have and we will help you.

  With respect to the screen, I would try a different screen resolutions. When you go into the system, display preferences, you should be able to select a resolution. I recommend reading this article: http://www.imore.com/how-change-display-settings-your-mac

  Just to make sure, you use only the display which is part of the Macbook or you use one or more external displays?

• CS6 worm 6.0.3 (oo1 mc...) -program monitor psd looks like light

  It will be difficult to describe...

  using layers psd (+ pictures of cards) I adjust the levels to the image... the full clip of this image... without keyframes...

  Now, in the program monitor, when ICT is static, the plan looks a little 'light and flat' as before the level setting (where I increase the contrast a bit)

  When I click on the CTI, the picture becomes more contrasted at the research level setting.

  When I PLAY the clip it looks like also more varied according to the level adjustment.

  But when I stopped reading or just putting ITC on this clip, it seems flat and light BEFORE setting the level...

  Someone at - he already heard of this strangeness?

  using win7 64 bit

  NVIDIA geforce gtx 680

  driver date: 29/12/2012

  Driver see: 9.18.13.1090

  'Levels', the only effect that this behavior is?

  Does always if you disable the MPE?

• Qosmio F10 Boot Screen problem

  I have an old book Osmio F10 2 years everything has gone wrong. I used the laptop last nite and was working fine. This morning when I turned it on, I heard a rattle of hard drive noise, so I refused and turn and he was still making the noise. Yet once I stopped it and to my surprise it wasn't beyond the Qosmio logo screen. Its saying an error #O IDE. I tried using the recovery disk but it says worng machine. In my view, is not regonizing my hard drive. I have documents important lots in my drive hard and do not want to lose. I really don't understand what is the problem.

  Your answers are appreciated!

  Sorry to say, but it seems that the HARD drive is crashed. Error IDE #0 is a bad sign. This means that the machine is unable to initialize the HARD disk. The rattling designates only the heads likely to be damaged.

  If the files are very important to you, you can send the HARD drive to a data recovery specialist. They can the data recovery, but it will be expensive.

  Remember that a HARD drive should never be invoked. They have mechanical parts and may crash at any time. It is important to back up your data on CD/DVD/USB/SD/Tape on a regular basis.

• Qosmio F10: black screen at startup - no. Toshiba screen

  Help

  My F10 is completely blocked and no longer works. After booting, the screen remains black and the fan starts to run madly, after a while the sound of toshiba happens but nothing else happens. No windows, nothing, only the fan running wild of the laptop.

  Before this happened I shut down the computer normally. We have about 26 or 27 degrees celsius in our office today, but I did not record any overheat in my computer. Something strange: I signed up for a few days, that after you start, only the toshiba sound came but no symbol of toshiba on the screen as usual.

  My question is: what can I do?

  Hello

  If the laptop cannot ignore the Toshiba screen so it must be something wrong with the hardware. Maybe the motherboard.
  But I'm not sure. I think that some diagnostic tests are needed to say what harm exactly.
  In this case, the only thing you can do is contact the Toshiba service partner in your country.

• I must have hit something and changed how my screen looks like when I open a tab page is real real long or it can be so short, I don't see anything

  original title: screen problems

  I must have hit something and changed the look of my screen
  When I open a tab page is real real long or it can be so short that I can't
  See anything someone can you please tell me how to get my screen to the
  how he was going crazy in New York!

  Do a restore of the system in Mode safe for a time
  before the problem started, may be worth a try.

  See the following articles:

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  How to restore a Windows XP system to a previous state using system restore
  http://bertk.MVPs.org/

  (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

  How to start safe mode in Windows XP
  http://bertk.MVPs.org/html/SafeMode.html

  Good luck...

• Computer crashes, screen looks like broad 'pixels '.

  Hello

  My Compaq SG3-250SC crashes after 15-60 minutes. The image on the screen can be seen, but very vague, it contains a lot of "pixels", 5mm wide. The only way to stop it is to turn on the computer with the button.

  If I opened the computer and put a big fan in front of her, everything works normally. A heat problem? The fans on the power supply and CPU are running.

  I tried with another graphics card, but with the same result.

  Any ideas what could be the problem?

  If the fan can help, it's a thermal problem.  I look to see if the heat sink on the video chip is still in place.  Sometimes the clips on the motherboard pull right out of the Commission on certain motherboards.  I don't know whether or not your motherboard has this type of accurate information.  Push down on the heat sink for the best contact, sometimes the compound dries and separates the radiator surface.  You will need to remove the radiator and put new thermal past on the video chip.

• Are there examples of what the iPad screen looks like the enterprise level without storefront with a banner of entitilement?

  It seems that all the magazines I opened that DPS has a store front. We want a subscription button to ours with a banner of law, and would mask the iOS subscription. I would like to see some visual examples of this. We are going in this direction and I would also like to know what other resources I should so I can get the design work carried out before the launch. Y at - it a tutorial Adobe TV, I can look at? I read this page: https://helpx.adobe.com/digital-publishing-suite/help/create-custom-viewer-app-ipad.html

  Can you direct me to more resources?

  Melissa

  Here is an article on creating a proof of concept apps:

  Creation of Concept Apps for DPS validation | Adobe Developer Connection

  After you build your application development, let us know if you have any questions.

• my laptop screen looks like its about to stop working.

  my laptop screen is not good. It has lines of blurred color everywhere and is hard to see something,

  also I find it difficult to use the internet on this subject. my router is pluged in my old pc and works well,

  but I can only pick up the internet occationally on my laptop.

  a friend told me the laptop is dying... maybe a virus attacked the hard drive.

  but I use it all the sercurity on it.and it is cleaned each frag day etc.

  any ideas?

  It could be problem with graphics card, try to restart your PC and press F8 key several times and choose Safe mode and go in and see if it is the same problem or not?

  To check the virus, try run full scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also, try to update your Windows and the graphics card and if the problem is not resolved, contact the manufacturer of your PC.

• BlackBerry Smartphones unknown icon on the main screen - looks like an emoticon

  I came across a strange icon.  It's on the screen main (I use the theme today) and it is just above the Messages, at the same level than where it shows the icon of unread messages, but it is more toward the Center, while the icon of unread messages is left a little.

  It is a number (1), and next to it is a thing to emoticon smiley face with a red star, replacing one of his eyes. It's almost as if he said to me an I a something (so the number one next to him), but I don't know what 'it' is, and it's as if there's a chance that I'll have more of them.

  Anyone know what it is?

  BlackBerry Messenger?

• I had problems with my Qosmio F10

  Dear friends,

  Let me share my problems with you and please help me with a solution for this.
  I have my qosmio F10 machine its over 1.5 years. It has been repaired 3 times since I bought it.

  1 (6 months after I bought it), I had a problem with my machine. ASP in Holland said that my Chipset and my V - RAM has been modified to be a new (chipset 855 PM at 915 PM & VGA card GeForce FXGo5700 to Go6600)

  2nd (6 months after the 1st repair), another problem occurred. My sound card was in trouble and was changed. It is ok.

  3rd (4 months after the 2nd repair), my system frozen. Toshiba Netherland replaced the fan and installed the new graphics processor. The spund of fan drives me crazy.

  And now, I just got a problem this morning. When I turned on my power, I did not see anything on my screen (white screen, even no happened qosmio opening graphics.) Looks like I got a same problem with my 1st. Would someone like to help me? What should I do now? Many problems has been held since the 1st repair, I'm tired this kind of problems. Could you guys help me, please?
  Thank you.

  Kind regards

  Moeltan
  (Netherlands)

  Hello

  I'll try to help you, but I guess it's a hardware problem and you will not be able to solve this problem without additional and service partner assistance.

  But we could try to find the fault. You should try to connect the laptop to the external display and could test whether the display will appear on the second screen.
  If this isn't the case, everything looks like a bad GPU operate probably the fault of the motherboard.

  Then contact the ASP in Holland and explain the situation as a whole.

  Good luck

• Monitor screen width is not long enough?

  If im making a video for youtube, but the screen looks like more of a square to a rectangle. So every time I post the videos, it's not HD. How can I make the width longer?

  It seems that you are using a version of the pre-release version of Premiere Elements, which means that you need to configure your project manually - settings and which can be done only when you start a project.

  Start a new project and in the project Panel, click settings.
  * If you are working on a draft standard definition or a video to a DVD, select the project preset for DV/large screen.

  * If you are working on a project of high definition 1920 x 1080, select the project preset for AVCHD Full 1920 x 1080.

  Much also depends on the model of camcorder comes the video you are editing. And, if you get video from a camcorder source (and it seems you are) there may be other considerations, including the format and resolution of the video file, the codec/compressor the software that created the video uses and if this material is protected by copyright and/or downloaded from a site like YouTube.

• Screen with a Qosmio F10 problems

  Guys, I have a very cold sweat and Im panicking on my laptop!
  It crashed on me and he couldn't do anything, so I turned it off. I came back to it a few minutes later and when I tried to turn it on, I get a black screen with as white on the screen axis-bands. I don't know if the laptop itself is wrong or just the screen. But I am worried, sick and trembling like a leaf here!
  Please help me!

  My laptop is a Toshiba Qosmio F10
  bought mid-2005 for about 1.5 years

  the screen is just weird. Black with vertical pin strips.

  No, I have not installed a new software or hardware. I was just working away in Word and Photoshop when he went AWOL. So I had put out of service.

  Hello, Karen

  There is certainly a hardware problem and I'm afraid there is nothing you can do alone. You can test it with an external monitor to see if the problem persists and check if the problem occurs due to faulty display or graphics.

  Believe me, the best thing you can do is to contact Toshiba authorized partner in your country. Let them test your defective hardware for laptop and Exchange.

• White screen on startup on a Qosmio F10

  I have the Qosmio F10. On the start screen is black and I can not get the image on my screen by pressing the tv on the far right. I have no windows startup screen or anything. Help, please

  Yes, more details are needed!

  But the description looks a bit like a hardware problem.
  If you are able to see everything on TV then I think that the internal display is broken.

  The GPU should be ok, due to the fact that the image on an external device.

  In this case there is not much to do to contact the ASP in your country to control the laptop.

  Good luck