Qosmio F30 - 140 - Toshiba before buttons do not work

Similar Questions

• Qosmio G35 AV600 - Toshiba Controlls buttons do not work on Vista

  Hi, can someone help me with this.
  I'm testing Windows Vista on my G35 AV600, but my top buttons do not work.
  All my FN buttons are OK.

  Is there a driver I need to install?

  THX...

  Dan

  Hello

  Check http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
  There you can find many things for Windows Vista.

• Qosmio F30: Toshiba control buttons do not work on Vista 64 bit

  Hello everyone

  I have Windows Vista 64-bit installed on my Qosmio F30, but before operation buttons do not work.
  I tried to use the 32-bit configuration of Vista drivers, but when I press it, I got the following error: "this function not taken in charge.

  So please can someone help me to overcome this problem.

  THX

  Hello

  You cannot use these Toshiba control buttons (play, pause, etc.) because the necessary drivers are not installed.

  You will need a compatible Vista value added package, but it seems that Toshiba page does not provide the 64-bit VAP but only the 32-bit version.
  The problem is that the software for Vista 32 bit does not work on Vista 64 bit OS.

  In my opinion so there's nothing to do right now

• Portege R600, Toshiba (backlight, toshiba assist) button do not work

  Hello world

  I have the problem with these two buttons on the right top corrner on my toshiba r600 and I just tried all buttons do not work.

  I associated with valid exe files buttons button support assist/toshiba toshiba / register with the paths of the target but buttons still do not work.
  also I check the bios there is nothing that can toggle buttons... etc...

  other things like software drivers successfully installed everything I download from toshiba support page.

  Any help?

  My version of windows is windows server 2008 enterprise x 64 sp1.

  Thank you.

  Hello

  The buttons work with the previous operating system preinstalled by Toshiba?

  I think the problem is the Windows Server 2008 enterprise x 64 sp1
  Eventually the added value package does not support it fully

  Of course the Windows Server 2008 operating system is based on Vista, but it s not the same thing and I think that's the problem

• Qosmio G40: Vista Ultimate - control buttons do not work properly

  Hello friends,

  I have a Qosmio G40 for a few months and everything works well until now.
  The problem is related to the front control panel.

  If I use Windows Media Player, PLAY/STOP/PAUSE/FORWARD/BACKWARD buttons work well, but if I try to use the other buttons like REC (in any case) or turning on LEDS or DOLBY, the button makes the usual sound, but nothing happens, does not open any program that is supposed to open.

  Does anyone have an idea why this is happening. I tried to look for any software configuration of these buttons but can't seem to find.

  My system is Windows Vista Ultimate Edition.

  Best regards
  Ricardo Monteiro

  Hello

  The European driver Toshiba page provides the AV controller Manager
  This tool allows you to customize and TOSHIBA AV Control button preset settings.

  Maybe you should install this tool and it should check again.

  In addition, it would be advisable to reinstall the VAP

  Check it out!

• Re: Satellite A200 - 1ZF Win XP & Toshiba control buttons do not work

  Hello

  I have a Satellite A200-1ZF with Vista installed initially.
  I removed Vista and install XP. Then installed all the drivers and almost everything works but these keys (power, www, mediaplayer, play, stop, back then) on the upper part of the phone do not work. :/

  Only be able to work properly... sometimes www and mediaplayer, but rest n, t work at all.
  I have Windows Media Player 9 series. I don't know if this is the problem with my version of drivers or windows media or something else...

  Help, please...

  Hello

  Satellite A200-1ZF belongs to the PSAE6E series.
  Choose the Toshiba driver download form European series.

  You will find an XP BIOS. If you are using Win XP on this laptop you will need to update the BIOS to version XP!
  In addition, you will need to install the Toshiba c. 2.48.2.2C controls.

  This tool is necessary to get the Toshiba Media buttons works!

  Good bye

• Qosmio F50 - 108 - Toshiba Flash Cards will not work with Windows 7

  Hello

  anyone tried to install Windows Seven? I tried.
  Everything works fine (Wlan, Lan, sound, etc.), but one thing is unable to work on my laptop: Toshiba Flash Cards.
  I installed the driver, and nothing happened...

  Any idea to solve this problem? Because I usually used it in Vista.

  Thank you and sorry for my English ;-)

  Hello

  The Toshiba Flash Cards has been designed for Windows Vista only

  Windows 7 is very similar to the Vista and many pilots could and would go with Windows 7, but in very rare cases certain tools would not fully compatible

  The Toshiba Flash Cards is not a driver; It s a utility that seems to be is not compatible with Windows 7

  Good bye

• Re: Qosmio F50 - 12 L - Touch buttons do not work

  Hello

  My Touch button cell phone doesn't work and I don t know why.

  I have Toshiba Qosmio F50 - 12L.
  Please help me

  Hello

  I have a Qosmio F50 too and it s really a great book. The design is nice and this laptop really fast.

  On my Qosmio F50 I can t notice a problem with the buttons of the illumination. So maybe you have installed a software application that isn't compatible with the software.
  In your case, I would try to reinstall the Toshiba value added Package. It controls the keys FN, illuminating buttons and all the other special function keys:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?

  Last but not least, let me give you a little advice: Please read this helpful thread on the problems with the buttons of enlightenment:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724𨝜

• Toshiba Controll buttons do not work on Satellite L350 - 107 PSLD0E with Vista

  Hello everyone! {: 8}
  I have the Satellite L300: x

  My problem is not key + work + multifunctional. :-( A single. It is a key of "turn off / on" sound.
  It started after reinstalling my Windows Vista operating system. : 0

  What can I do? I need in there!
  Help...
  Thank you.

  Hello

  You have a Toshiba Vista preinstalled OS or have you changed something?

• Don't start Qosmio F30-140

  My Qosmio F30-140 recently stopped booting.
  When I press the power button, the light (bottom) to show that it s on turns green, but the screen is just blank. It does not and I have finally to maintain the power for a few seconds to killswitch button.
  Sometimes, I hear the fan starts to spin very hard. I tried to fix it by removing the hard drive and put it in another one of my computers laptops and reformatted using the recovery disk.
  Then I put back it in the Qosmio F30-140, but it still does not work.

  Can someone help me with this? Is also someone else having similar problems like this?
  Any help will be appreciated.

  Thank you

  I don't think not described issue has something to do with the HARD drive. If you don't see anything on the screen, it must be a serious hardware problem with chip BIOS, CPU, graphics card or who knows what else.

  I'm afraid, only solution for you is service. Contact the nearest authorized maintainer to check your laptop.

• Qosmio X 500-1801-FN key does not work with Win 7

  I have to question why Toshiba Qosmio X 500-1801 FN buttons does not work on the Windows 7 Professional 32-bit operating system. Please answer the [email protected]

  For the FN buttons work, you must install VAP (value added package) and Flash memory card Support utility.
  These two tools are located on the European driver Toshiba page.

• HARD drive is not recognized during installation of Windows XP on Qosmio F30 - 140

  Dear alls,

  I'm trying to install winxp on my Qosmio F30-140, but when I boot from the CD and after Setup starts, it shows me a massage like this:
  "windows has not found any HARD drive. Please make sure that you have an and it's probably work and connection very well... blah blah blah... »

  What should I do to install my OS?

  Thank you

  Hello

  your machine has a RAID controller, so before installing windows, you must install the RAID controller before. This occurs after you´ve began installing XP. Then a message on the bottom of the screen will appear that tells you that you must press F6 if you install HARD drive controllers (or something that way).
  You need to install the RAID driver from a USB floppy drive, which can be downloaded here:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  After you have installed the driver for your drive HARD will be displayed, and you would be able to install XP.

  Check this thread for more information:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24582&MessageID=94387

  See you soon

• Button of the front panel & remote control questions Qosmio F30-140

  Hello to all users of the Forum and to whom, who prefer Toshiba to a daily activity of s.

  I am owner of laptop Qosmio F30-140 for 7 months. I can say that I m happy with my laptop. But about 2 weeks back, I had some problems, which I can't resolve up to our days.

  I use Windows Defender to protect my PC from alert elements, applications of which I erased by this program once. There after I ve discovered that s keyboard buttons in the library and the remote responds does not and does not control panel. I had tests to recover by Qosmio player recovery CD, but unfortunately all attempts have failed.

  Please help me solve this problem, because I am deprived of my remote control, in which I so need.

  As for you and best regards.
  Dr.VugarVali

  Hello

  Looks like you have just messed the whole OS.
  Use and relocation of the recovery CD Qosmio Player will not allow Toshiba cotroll buttons and remote control.

  In you case reinstalling the driver would be desirable; Start with Manager common Module, controls, remote control.

  If it does not help the use of CD recovery Toshiba does wonders! ;)

  But note; Don t forget to back up your data because the recovery CD formats the HARD drive!

• Re: NTLDR and Qosmio f30-140

  Hello classmates

  Is my Toshiba Qosmio f30-140, it came with windows xp, but I installed windows 7 and it works very well for almost 2 years I have had the problem with the graphics card began as little green dots until the white screen and was on a year, so I tried to install the new windows 7.

  So I remove my main and attached to the other PC HARD drive and format the C partition and copied source windows in the C partition and HARD drive in wood as a first start and restart BUT I got NTLDR is missing press ctrl + alt + delete to restart

  * Notes *.

  1. I have problem in the graphics card because I installed windows 7. I got the yellow triangle on it in the Device Manager window.

  2 - my screen does not work, just up the qosmio for a second screen and disappear when I start it. If I use the external LCD.

  3 - I installed additional HDD (it has space for additional HARD disk).

  * I you have any Questions for you :*
  1 - How can I activate the laptop to boot from usb memory flash with source of windows 7

  2 - How can I install windows 7 NOOWW?

  Thank you and appreciate any help

  Canadian shark

  Hello

  > How can I activate the laptop to boot from usb memory flash with source of windows 7
  I think that's not the MAN of functions;
  I m not 100% sure, but I think that this BIOS does not support booting from SD card reader.
  But why you don t try to boot from the CD/DVD drive?

  If I understand your question, the external LCD is recognized correctly.
  Go into the BIOS and set the external monitor as the primary monitor.
  Then, you should be able to see everything.

• Card of Qosmio F30-140 is scalable?

  The Qosmio F30-140 comes with a Nvidia GeForce Go 7600 equipped factory.

  Hi mate,

  Unfortunately, the VGA chip cannot be replaced since it s "wired" on the motherboard, which means that the GPU is soldered on the motherboard.
  If you want to replace it you will have a soldering station, which costs probably above 13,000 bucks and a team that knows in soldering BGA (http://en.wikipedia.org/wiki/Ball_grid_array) and maybe you have plans of engineering for the motherboard and and it wouldn't hurt to have at least two programmers for the creation of a new BIOS, which implies that you have some connections to Toshiba Japan because the BIOS is not a FRIEND, it s one or Phoenix BIOS toshiba which has its own characteristics and I Don t know a soul who managed to enter the structure of such a Toshiba BIOS.

  I hope I was able to clear your mind. :)