Qosmio F50-114 - how to use the video cable?

Similar Questions

• Qosmio F50-125 - how to use the TV - FM Tuner in Windows 7

  Hello

  I use Qosmio F50-125 and I've just upgraded to Windows 7.
  Earlier, I discovered that I have a TV tuner on my laptop and I don't know how to use it.

  First of all, I don't have drivers for my TV tuner and tried to download something like v.2.3.3.31 driver TV tuner on the toshiba site, but it is not a typical setup.exe but only some files inside.

  If you could tell me a little more about how to use my TV option and how to install the correct drivers, I would be really grateful.

  Thanks in advance!

  After you have extracted the files you get the folder with other files
  I assume these are files required by FM tuner driver.

  Now you need to go to Device Manager, must mark the FM tuner (possibly unknown device if the driver is missing) a duty to install/update the driver.
  In your case, use the Advanced Setup.
  This allows to point to the files extracted.

• How to use the video port with Vista on Qosmio G30

  Im running windows vista Ultimate edition.
  How to use the monitor in port?

  The Composite (in the port monitor) port is placed to the right.
  With the video component cable software plug-in delivered a CATV or satellite box can be connected to the computer to watch channels.
  You can for example use the Qosmio Player or Windows Media Center to watch other channels.

  As much as I know the ultimate Vista supports Windows Media Center, Windows Media Center HDTV.
  You should read some more details on your new operating system!

• How to connect the video cable with Qosmio G50

  Hello

  I bought the Qosmio G50-11s and received a video cable with it. (Jack mini jack RCA Red/white/yellow) But I find no way to connect it to my laptop, not the manual or all online resources talks about it. The problem is that I need to capture video from my VCR to my laptop and normal TV antenna comes with a lot of noise, so I have to use video in the cable. Any ideas?

  Thank you
  M

  Hello

  In the past I made some experiences with it. I wanted to create DVD copy old VHS VCR equipment. Using the recorder even? I did this on Qosmio G30 but the principle is the same.

  The fact is that you need to send the signal to the laptop and to do this you must use the video port.
  I do not see that your Qosmio has several of them, so I think that the only way to send the signal to your laptop is to use the antenna port. What video output port you want to use on your recorder?

• Re: Qosmio F50 - 10M - how to install the 64-bit version of BIOS?

  Hello guys,.

  I've updated my Qosmio F50 for Windows7 Professional 64-bit by installing the scratch (deleting these VISA32bit; from formatting the partition/hard drive).

  I installed the BIOS version 2.20 update 64 bit installation process stopped saying something like: "you already have the latest version of the bios. Of course, I made the misstake install the bios with the same number of version 2.20 while I used vista, but this version was the 32 bit one.

  How can I convince the computer to accept the 64 bit version of the BIOS installed (because it seems not to recognize that it is different) and what are the special benefits from 64 to 32-bit version of the BIOS?

  Thank you for your kind replies.

  Yours,
  Starmind_1

  Hey,.

  Are you sure that you have installed the WIN32 of BIOS version if this error message appears?

  Last year I also changed the BIOS to a WIN32 for WIN64 version and it was no problem. Update worked correctly, but I did this update on the preinstalled Vista version of Toshiba.

  It works when you try the update of Vista?

• Qosmio G35-av600: how to use the display internal as a monitor using composite-in?

  I want to connect my video gaming system and use my laptop screen, but I can't seem to understand how to change the settings so that my monitor displays the video game? Composite in the settings?

  I have a G35-av600 bought last June. If anyone has any suggestions, let me know

  Hello

  I don't know if I can help because I know something about the Qosmio G10 and the G20 and your Qosmio seems to be a mobile US but I will try my best ;) m

  Qosmio G10 for example, you must modify the input parameters in the Toshiba utility image of development, but I guess you don t have this tool pre-installed.

  But I think that the composite is a good Butler built the connection with the game station.
  I think that in the advanced graphics settings, you should be able to find the right options.

  Play around with the settings.

• Qosmio F50-126: how to activate the integrated graphics card?

  Running Windows 7 on F50 - 126.
  After checking my specs on the site Web of toshiba, here are the details on my graphics card: -.

  Manufacturer: NVIDIA;
  type: NVIDIA; GeForce; 9700 M GTS supporting TurboCache; technology
  memory: 512 MB dedicated VRAM (up to 1 791 MB of total available graphics memory using the TurboCache™ technology with 3 GB of system memory)
  memory type: GDDR3 (800 MHz) video RAM (resp. RAM video and system memory combined)
  connected bus: PCI Express 16 x

  I want to know if I can turn on my integrated graphics card. I know that clicking on powersave suppose to turn off my 9700 m and go to the integrated card, but the laptop did not want it actually disabled.
  Like, watching a video or a game of battery the difference between "Powersafe" and "Balance" is not that much.

  The computer seems to work at full power.
  Because I remember when I had Vista installed, the game and used trolling videoes. But on windows 7 it doesn't. Anyone know how to activate the integrated card?

  I have my computer updated completely and everthing... How d I do not know if my card is turned on or off?

  Hi mate

  I'm a bit confused of m.
  Why?
  Because you ask about activation and deactivation of the graphics card (integrated).

  First of all, there is ONLY a single graphic chip!
  It s a GeForce 9700 M GTS graphics card.

  The graphics chip supports the 512 MB GDDR3 own (he dedicated video memory s) and it s is always available!

  In addition, the chip supports shared system memory. It depends on the available main memory!

  For example:
  * With the help of Win 32 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB (using 3 GB of RAM you 1279 MB)
  TOTAL available graphics memory: 1279 MB (1791 using 3 GB of RAM)

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1279MB
  TOTAL available graphics memory: 1791 MB

  * With the help of Win 64 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB
  TOTAL available graphics memory: 1279MB

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1791
  TOTAL available graphics memory: 2303

  As you can see the use of Win 64-bit and 4 GB of RAM would be better for the graphics card as the use of the file Win 32 bit with 4 GB of RAM

• Qosmio F30-127: how to use the SD - no SD card reader icon

  Could someone how to use SD F30-127.
  I tried to get the image from my SD card.
  I inserted in the slot, but no drive ICON displayed

  Hmmm. Please check if the SD card has been recognized in the Device Manager.
  There should be no yellow exclamation!

  Another allusion;
  -Remove the SD card in the slot
  -Go to Device Manager and remove the SD card controller
  -Now reboot the laptop
  -After restarting again windows should recognize and install new hardware. It is a SD card controller.
  -Now, try to reinsert the SD card!

  By the way; have you used the format SD card?

• Qosmio F30-140 - how to use the USB Flash boot option?

  Dear,

  After I updated my BIOS of the laptop, when I start my laptop I find new start method, it is from USB Flash?  :| How I can use it and what type of file should be in it? I mean .iso or what?

  Thank you

  Hello

  I n t have Qosmio F30 so that I can t test it for you, but I think it means options that you can boot from a USB stick for example. Did you check that?

  You can boot from an iso file t because you have to create a bootable media. For example a Windows Start disc or a version of Linux that you can boot from a USB key.

• How to use the headphones cable and load on iphone 7?

  I am very interested in th new IPhone but I'm not clear on how couldn't I maintain the main use that I have now with it.

  In many cases, I use my headset while I load the Iphone:

  -audio conversation at the end of the day when the battery is low and he needs to reload

  -When chat or listen to music while using my phone as a modem, with usb cable (otherwise as this function drains the battery quickly impossible)

  Also, I tried to use a Bluetooth headset but frankly I prefer questions from the cable to the battery ones (always unloaded when you have an important conference call) and the sound quality not so good

  So the question is simple: Apple will offer, for a reasonable price, a lightweight port Doubler ? It's the only solution I see, even if painful compared to the current iPhone (risk of losing the adapter, may not be comfortable in a Pocket / may damage the Iphone port...)

  Ulysse311 wrote:

  .. So the question is simple: Apple will offer, for a reasonable price, a lightweight port Doubler ?...

  Hello

  It is a community of support based on the user.

  If you wish to submit comments or suggestions to Apple, you can do it here:

  https://www.Apple.com/feedback/iPhone.html

• How to activate the video without coating

  I am doing a demo application using flash.

  I'm a Flash newbie.

  Importing the video is easy, but I didn't understand how to use it.

  If I embed the video and the game in the timeline panel, I can work on it and add the motion tweens of the hand to the video to make a demo of interesting application, BUT as Flash puts cautioned however, integrating video causes synchronization question-YES, HE DID! It exports badly and is unusable.

  I don't understand how to use the video. For me, the video is only as an image of sill and don't like a video at all.

  So how can I activate the video work with the timeline to add graphic interpolation without the integration of the video?

  How can I add the hand movements to the video in flash to simulate the push to talk key?

  1. If you set your flash to 29.97 frame rate, you can be able to overcome the problems of synchronization of your embedded video.  This is the simplest solution for inexperienced users of flash.

  2. you can also play your video in an flvplayback component.  You can add some cuepoints to your video and use to raise events in flash you can 'sync' flash animation / sound with animation / sound your video.

• How to use the Qosmio F50 Quad core HD processor in other software

  I would like learn how to use the image processor in other programs in addition to Toshiba Upconvert, transcoding, face Navigation and gesture of the functionality of the control. Someone has an idea? Thank you!

  I doubt that there are software available because the Cell processor is only a hand full of PC.

  If you have applications for creation of media professionals, you can get the plug-in to activate the cell processing.

• How to get the video intro off my google home screen I already saw it, where is the firefox logo used to be.

  How to get the video intro off my google home screen I already saw it, where is the firefox logo used to be. I started with the last update that I rebooted.

  Hello
  to change the homepage when opening firefox-press 'Alt' and click on tools-> Options.

  Main menu, you can change the URL.

  If the problem persists, you can follow these simple steps:

  Enter about: config in the address bar and press ENTER. Accept the message of 'dragons' to see the Advanced preferences screen. Use the above search box to enter the below pref.
  

  You can assign an empty string to stop your Firefox to retrieve "extracts" and brandLogo changes the browser.aboutHomeSnippets.updateUrl pref. Right-click this pref and select Edit then clear the value as pref in the box that appears, and then click OK. Who will also disable "snippets" that appear under the container of the research on the default home page.

  Then you must open the folder of your profile, via help > Troubleshooting Information > profile folder > > button view folder. Then close Firefox. Your profile file open with Firefox closed (Firefox '3-bar' menu key > exit/Quit), wait or two minutes, then remove the storage\moz-safe-about + home folder in the Firefox profile folder to remove the brandLogo and stored in IndexedDB code snippets to make Firefox use the default brandLogo and a defined default code snippet.

  If you later change your mind about these changes, you can reset the pref browser.aboutHomeSnippets.updateUrl via the context menu and Reset allows to retrieve the default value using the storage\moz-chest-fort-about + home folder again.

• can I use the screen touch iq526 as a monitor to another computer? If so, how to enter the video?

  can I use the screen touch iq526 as a monitor to another computer? If so, how to enter the video?

  You know, it's just a thought.  I'm not sure that the differences between the iq526 and iq770, but as I was looking around I found this article.  I don't know if it'll help, but you might want to take a look.  Obviously someone understood how to use the HP touchsmart as an external monitor for his Dell laptop.

• Re: Upgrade Vista Home Premium to Ultimate - Qosmio F50-114

  I want to upgrade Vista Home premium to Vista Ultimate on Toshiba Qosmio F50-114 affect this on my hardware or my other software?
  I use the 32-bit system and 4 GB of RAM expandable up to 8 GB.

  Hello

  As much as I know that this will not affect the material, but I read in some discussions that the Ultimate version is not fully compatible, or could not be fully compatible with some tools from Toshiba as added Vista package.

  I m not very well if it could be a deal on your Qosmio F50-114, but everything is possible.

  Welcome them