Qosmio F50-125 - how to use the TV - FM Tuner in Windows 7

Similar Questions

• Qosmio F50-114 - how to use the video cable?

  Hello
  I have a Qosmio F50-114.
  I want to capture video via the video cable supplied with the computer.

  The computer came with a video component cable software plug-in (1 x 3, 5mm - 3xRCA white/red/yellow). The only place in the manual stating that cable is the only a-in-the-box-section.

  On my old Qosmio F20, I had a specific connector for the video cable component software plug-in. There is no specific 3, 5mm connector so I suspect that I have to join one of the IR ports, or one of the audio-connectors (?).

  Looking forward to a response.
  / Daniel

  Hey,.

  Don t get me wrong, but I'm 99.9% sure that there is no video port on Qosmio F50. As far as I know that these books are not available, they have a video output only, port but not port of entry to capture video.
  So you mixed up something I think

  What you may be hearing is integrated TV Tuner, but on this port you can only record videos from DVB - T signal.

• How to use the digital TV tuner on Qosmio G30?

  Hello, I recently got a qosmio G30-175. Could someone tell me how I can use the digital TV tuner mode qosmio player? Thank you

  Hello

  You won't like this, but unfortunately the digital tuner is not a musician Qosmio option.

  QosmioPlayer software is actually quite limited you really need to start Windows Media Center to get all the features of your machine which is a shame. There is always a chance toshiba can update the software of PS in time to take into account items such as the digital tuner.

  Despite this, you still have one of the best phones on the market, so I would like to concentrate on that.
  :-)

  Kind regards

  Mark

  Post edited by: Mark Nettleton

• Qosmio G40 - 10F: how to set up double Tv Tuner in Windows Media Center

  Hello

  I recently bought a 10th G40 and I was wondering how to set up dual Tv Tuner in Windows media Center to watch and record the Tv at the same time.
  I tried to download the new driver from the Toshiba download page, but it seems to make no difference that Media Center does not give me the ability to configure 2 tuners.

  Any help would be grateful

  Michael Bowen

  Hello

  Found this useful Microsoft page:
  http://www.Microsoft.com/Windows/products/windowsvista/footnotes.mspx

  Take a look at the chapter * M *-> on MCE

  You can find this info:
  + Reading and TV recording features require a USB TV tuner or external. Supports up to two TV tuners +.

  So in my opinion, you cannot record TV and watch another channel at the same time using only the internal TV tuner.

• Re: Qosmio F50 - 10M - how to install the 64-bit version of BIOS?

  Hello guys,.

  I've updated my Qosmio F50 for Windows7 Professional 64-bit by installing the scratch (deleting these VISA32bit; from formatting the partition/hard drive).

  I installed the BIOS version 2.20 update 64 bit installation process stopped saying something like: "you already have the latest version of the bios. Of course, I made the misstake install the bios with the same number of version 2.20 while I used vista, but this version was the 32 bit one.

  How can I convince the computer to accept the 64 bit version of the BIOS installed (because it seems not to recognize that it is different) and what are the special benefits from 64 to 32-bit version of the BIOS?

  Thank you for your kind replies.

  Yours,
  Starmind_1

  Hey,.

  Are you sure that you have installed the WIN32 of BIOS version if this error message appears?

  Last year I also changed the BIOS to a WIN32 for WIN64 version and it was no problem. Update worked correctly, but I did this update on the preinstalled Vista version of Toshiba.

  It works when you try the update of Vista?

• Qosmio G35-av600: how to use the display internal as a monitor using composite-in?

  I want to connect my video gaming system and use my laptop screen, but I can't seem to understand how to change the settings so that my monitor displays the video game? Composite in the settings?

  I have a G35-av600 bought last June. If anyone has any suggestions, let me know

  Hello

  I don't know if I can help because I know something about the Qosmio G10 and the G20 and your Qosmio seems to be a mobile US but I will try my best ;) m

  Qosmio G10 for example, you must modify the input parameters in the Toshiba utility image of development, but I guess you don t have this tool pre-installed.

  But I think that the composite is a good Butler built the connection with the game station.
  I think that in the advanced graphics settings, you should be able to find the right options.

  Play around with the settings.

• Qosmio F50-126: how to activate the integrated graphics card?

  Running Windows 7 on F50 - 126.
  After checking my specs on the site Web of toshiba, here are the details on my graphics card: -.

  Manufacturer: NVIDIA;
  type: NVIDIA; GeForce; 9700 M GTS supporting TurboCache; technology
  memory: 512 MB dedicated VRAM (up to 1 791 MB of total available graphics memory using the TurboCache™ technology with 3 GB of system memory)
  memory type: GDDR3 (800 MHz) video RAM (resp. RAM video and system memory combined)
  connected bus: PCI Express 16 x

  I want to know if I can turn on my integrated graphics card. I know that clicking on powersave suppose to turn off my 9700 m and go to the integrated card, but the laptop did not want it actually disabled.
  Like, watching a video or a game of battery the difference between "Powersafe" and "Balance" is not that much.

  The computer seems to work at full power.
  Because I remember when I had Vista installed, the game and used trolling videoes. But on windows 7 it doesn't. Anyone know how to activate the integrated card?

  I have my computer updated completely and everthing... How d I do not know if my card is turned on or off?

  Hi mate

  I'm a bit confused of m.
  Why?
  Because you ask about activation and deactivation of the graphics card (integrated).

  First of all, there is ONLY a single graphic chip!
  It s a GeForce 9700 M GTS graphics card.

  The graphics chip supports the 512 MB GDDR3 own (he dedicated video memory s) and it s is always available!

  In addition, the chip supports shared system memory. It depends on the available main memory!

  For example:
  * With the help of Win 32 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB (using 3 GB of RAM you 1279 MB)
  TOTAL available graphics memory: 1279 MB (1791 using 3 GB of RAM)

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1279MB
  TOTAL available graphics memory: 1791 MB

  * With the help of Win 64 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB
  TOTAL available graphics memory: 1279MB

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1791
  TOTAL available graphics memory: 2303

  As you can see the use of Win 64-bit and 4 GB of RAM would be better for the graphics card as the use of the file Win 32 bit with 4 GB of RAM

• Qosmio F30-125 - how to upgrade the RAM?

  Hello

  I have a model PQF30E Qosmio and who seek to increase the RAM.

  I read that this model can take 2 GB max as opposed to the PQF32E which can take 4 GB.

  I have the standard 512 MB installed at the moment and when I open the back I have only a slot for expansion. Should I put a 2 GB upgrade in this slot I can not find a 1.5 GB upgrade or is it possible to delete the original 512 and replace with2 x 1 or 1 x 2 GB.

  Thank you
  Ben

  Hi mate

  What boarder said is right.
  The user manual provides information on the possible RAM upgrade and there is also an instruction how to put the RAM in the slots.
  Usually it s not difficult and can be done very quickly.

  View just the words to the subject of the upgrade of RAM max;
  It's material and limited to Intel chipset limitation.
  If you want to know how much RAM is possible then check your type of chipset and visit Intel for chipset details.
  In the datasheet, you can find the specifications of the chipset.

• Qosmio F30-127: how to use the SD - no SD card reader icon

  Could someone how to use SD F30-127.
  I tried to get the image from my SD card.
  I inserted in the slot, but no drive ICON displayed

  Hmmm. Please check if the SD card has been recognized in the Device Manager.
  There should be no yellow exclamation!

  Another allusion;
  -Remove the SD card in the slot
  -Go to Device Manager and remove the SD card controller
  -Now reboot the laptop
  -After restarting again windows should recognize and install new hardware. It is a SD card controller.
  -Now, try to reinsert the SD card!

  By the way; have you used the format SD card?

• How to use the rule in WordPad for Windows 7

  Aid for the revised new WordPad for Windows 7 does not mention rule. There is no indication as to the definition of the margins of sovereign or how to click on the settings tab.

  The margin for Wordpad settings are stored in the Page layout dialog box. Access it from the "file" menu (icon just to the right of the home tab).

  Change tabs is a matter of clicking on the rule itself. Once a custom tab has been created, the tab spaces by default in 0.5 are replaced until the tabs custom custom tab can be moved left and right to improve positioning, or dragged the rule to remove. The rule also allows to change the body and the first indents of line from any point.

  If you prefer to work with dialog boxes for the settings section/tab, right-click on any paragraph and select the paragraph menu item. It can also be raised with the paragraph buttonon the home Ribbon, then on the right-most button tab in the second row or paragraph section. The tabs button is at the bottom left of this new dialog box.

  Using WordPad
  http://Windows.Microsoft.com/en-CA/Windows7/using-WordPad

  If you use the Internet to find more information, do not forget to include Windows7 in your search terms so that you get the appropriate information. (for example 'tab in Windows 7 wordpad settings')

  • If this proposal of solution solves your problem, please go back and mark as answer for others to consider.

• How to use the SunDisc mini adapter in Windows 8?

  * Original title: SunDisc min adaper

  I have HP laptop. I also have windows 8. I don't know how to use this mini adapter SunDisc?  I don't have a clue as to where to insert on my laptop or if I need something else to use.  I'm not what other information you need to help me.  I also do not know if this SD adapter contains photos, videos, music... etc. Thank you

  Hi Sheryl

  I guess it is an adapter to allow their reading of a micro sd to a phone card or a Tablet is it?

  If this is the case, you should be able to access the contents of the card via the usb cable that connects the device to your pc without having to use a card adapter...

  A quick websearch brought Sandisk (rather than sundisc) - so could you clarify?

  Thank you - R

• How to use the AVMenuItemExecute() with an external window

  Hello

  I am using the AVMenuItemExecute() function in an external window. I mean I have a document open in another window (to aid

  AVDocOpenFromASFileWithParams or a feature like this).

  In fact, the problem is that the AVMenuItemExecute() is running on the windows of Acrobat that is emplty in my case, because I opened the PDF file in another window.

  Do you know if it's possible or not? Whethet it is possible how can I do?

  Thanks in advance,

  Joel

  Sorry, but you can't: (.)

  As you can imagine, MenuItemExecute() is on the menu... running items these does ARE menu items that in Acrobat/Reader and NOT in any application based on an external window.

  What menu item you try to run?  Perhaps there is another way to access this feature?

• How to use the Dell CD to install windows 10

  Hello

  We bought several optiplex 3040 provided with windows 7 preloaded, all machines include a purple cd with windows 10. I followed the instructions for restart in UEFI, access the menu CD mode and choose to restore the PC, the machine starts to work after it indicates that the restore is complete it restarts and displays the menu even all over again. What should I do to install windows using this CD of 10? what I am doing wrong?

  Thanks a lot for your help

  Kind regards!

  Never use DVD provided to install Windows 10. It is an obsolete old construction of Windows 10 meaning that basically, you need to install Windows 10 twice (clean install old build then update install the new version). In addition, the optical drive fails to pass SecureBoot.

  Download an .iso of 10 RS1 Microsoft's Windows Live and do an install USB Bootable using the GPT Partition for UEFI BIOS, make sure that its FAT32 formatted and make sure your UEFI BIOS settings have Legacy Roma disabled, Legacy Boot disabled and a start on UEFI with SecureBoot.

  See here for more details:

  http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

• Qosmio F30-140 - how to use the USB Flash boot option?

  Dear,

  After I updated my BIOS of the laptop, when I start my laptop I find new start method, it is from USB Flash?  :| How I can use it and what type of file should be in it? I mean .iso or what?

  Thank you

  Hello

  I n t have Qosmio F30 so that I can t test it for you, but I think it means options that you can boot from a USB stick for example. Did you check that?

  You can boot from an iso file t because you have to create a bootable media. For example a Windows Start disc or a version of Linux that you can boot from a USB key.

• How to use the string as a terminal window control

  Hi all

  I am setting up a terminal window in my VI and to do this I have a control of the chain and an indicator of the chain.

  I want the user to be able to write a command in the terminal and when hitting enter into the control must update, but not before! I'd do it

  as the user to be able to enter several commands without having to re - click the control with the mouse, so he must stay in the

  control window.

  The result of this chain control is introduced to an external motor controller, which responds with a string entry in the string of an invoke node indicator.

  I tried to make some case of the event, but not quite sure how I'm going to only detect the input control.

  Any ideas how to precede?

  Thank you

  Concerning

  Tommy

  Yes, in the structure of your event, look for an event of your control chain called 'key' down... on the left, there are several upcoming parameters (char, Vcle etc.) where you can use for example the char find char = 13 (back).

  Look here: http://zone.ni.com/reference/en-XX/help/371361B-01/lvprop/control_key_down/

  Good luck

  Christian