Qosmio F60 - 10K: Win 7 64 bit recognizes all the devices connected to the USB

Similar Questions

• Re: My Qosmio F60 - 11f is VERY SLOW and stuck all the time

  Hi everyone :)

  I have a qosmio f60 - 11f with 2.26 to 3.3 with turbo i7
  6 GB of Ram
  640 GB HHD
  1 GB Nvidia GT330M graphics

  the problem is that since I bought it and its slow I don't know why!
  Now the laptop over 14 months and I did a lot of recovery time because of problems and stuck, I him.
  last day I did the cover and I noticed that the laptop is becoming slower!
  It takes about 5 minutes to get started! not only that, after started and open any folder you will notice how slow it is. Even in the videos I can't open it because the laptop will be stuck and play the video very very slow!
  Please help me.

  Hello

  First of all I recommend to check the HARD disk for disk failure HARD errors that may affect the performance of the computer, you should check the HARD drive using freeware tools one of the tools that I use is the Drive Fitness Test he has been published several times here in the forum and its really great software.

  If the HARD drive would be ok and if no error would be detected, then, I recommend disabling some processes that are not important for you in many cases different tools would be charged during the OS start process and these tools run in the background that slow down the operating system.
  Run msconfig and check the Startup tab
  Here you will see all the programs that are loaded at the beginning, you can uncheck the tools is not necessary

  Note: If you are not sure what means the only process, use google and search in internet for more details otherwise don't disable this.

• Qosmio F60 - 10K - accurate pilots or recovery disk

  Hello

  I recently purchased this model, however had a few problems with HARD drive and had to format entirely. Resume function is therefore lost. Could not find the exact drivers for this model and as I used the drivers I found under name Qosmio F60, done computer startup laptop over a long time and Win Experience index is low enough.

  So the question is, where I could find the exact drivers for Toshiba Qosmio F60 - 10K or order recovery DVD/BD?

  Hi s0vijus,

  If you are looking for accurate drivers, it would be very interesting to know what operating system you are using. Drivers for Windows 7 32 bit and Windows 7 64-bit are different so it s important information. Normally everything can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Last but not least you can order directly here Toshiba recovery disc but it s not for free:
  https://backupmedia.Toshiba.EU/landing.aspx

• Qosmio F55 all the usb does not

  Hello

  My qosmio's old 1y, 1 week ago any port usb stop working, mouse, printer, etc. E - SATA is ok, but wen I conect usb-same problem.
  I put the express card slot usb hub, even. It is common in usb, bicose its mi phone recharge, but said peripheral usb not recognized.

  So I'm updating the bios, chipset, all the drivers and reinstal windows vista, then I put windows 7, even I open it and I try to find CMOS batery to reset, but I don't the have not found
  I remove all the usb Manager divides and restart. even

  Please guys I need help
  tanks

  Hello

  You said that you have installed Windows Vista again
  But did you use Toshiba Recovery disk or the image of Toshiba for recovery?

  It seems really odd that all USB ports works Ok, if only one USP port would not work, it would be really strange but all!

  It seems that you have already tried everything, what I might suggest; Chipset, bios update, new installation of the OS.

  I have ideas and the only explanation for me is that the motherboard is affected

• My computer is no longer automatically recognizes all the devices inserted in the disks.

  My computer is no longer automatically recognizes all the devices inserted into readers, like a CD or SD card photo. Recently I bought a micro sd card for my phone, but when I insert in the USB port, it recognizes that no more. How to do that everything works again. I have XP Service Pack 2

  Hi Danny Bralski,
   
  -Did you change on your computer before this problem?
   
  Follow the steps listed in the order.
   

  Method 1: Check if the USB port is defective.

  If you connect a USB device to a defective port, the device will not work. Try connecting the device to a different port. If all USB ports are in use, disconnect one of the other devices and plug the problematic device into that port.

  Method 2: Check if there is a problem with the device.

  If you have another computer that is working properly, plug this computer to see if you encounter the same problem. If you have the same problem, there could be a problem with the unit.

  If you believe that your device is defective, contact the manufacturer.

  Method 3: Run the troubleshooter from the link given below:

  Hardware devices do not work or are not detected in Windows

• Qosmio F60 - new SSD now will not appear in the BIOS or at the Win7 Installation

  I recently bought a new OCZ Vertex 4 128 GB Solid State Drive to upgrade my PC laptop Toshiba Qosmio F60 with.

  After that I installed it first of all, it has been detected immediately in both the bios and during the installation of Windows 7. However, for some reason any approximately 40% of the way through installation, the computer restarts and the drive has disappeared since the BIOS all together and now, after several reboots it does not always detect!

  Note that I already have the latest version of the BIOS installed on my laptop V2.70

  I'm not sure what I would do here and any help would be appreciated?

  Can you please set BIOS to default settings and check if the SSD is recognized in the BIOS again?
  > Please note that I already have the latest version of the BIOS installed on my laptop V2.70
  In my opinion it is not relevant at all.

• Win Vista 64 bit hangs on the 9800GT Nvidia video driver

  Hello

  I recently installed Windows Vista Ultimate 64 bit and it works very well using GPU on board. Problems started when I installed the 9800GT. It works when I use the standard VGA driver windows installed, but after that I updated to the latest version of the driver the screen would be black after the initial screen that displays the progress bar just before the vista logo and nickname. I went to the VGA driver, so I can type this upward.

  The machine is still trying to get all the service packs and updates, and I was wondering if the problem will be solved by getting all the updates.

  The problem seems so much as questions of other people were able to see with the video card since ' 09. I hope he has improved since then.

  Thanks in advance.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/win-7-64-bit-crashes-on-NVIDIA-9800GT-video-driver/986b16cd-5c9b-4DD6-a9a7-ee18fccd7050

• Win 7 does not recognize that I am connected to my home wireless network.

  Recently, I upgraded my desktop and my laptop at home to Win 7. I'm trying to set up a home network, but on my laptop, I can't change my home network location. Even though my laptop is connected to the internet via my wireless router, Windows don't think that I'm connected to a network. When I click on "connect to a network", it shows that I am connected to my wireless router. When I try to set up a home network on the laptop, it tells me I need to change the network location of the Public at home, but since he did not think that I am connected, it will not allow to do me this.  I searched the internet and worked through it for hours, but can't seem to find a solution to this problem. Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I had this same problem.  I have a home group on my desktop running win 7 64 bit.  My laptop (win 7 64 bit) could not connect because the internet connection was showing pubic hair and I couldn't change it.  Here's what I did.  I deleted all my networks and groups off the laptop computer.  I restarted my laptop.  On my desktop, I went into Control Panel, home group and consulted my password.  I also need my wep key of wireless network.

  To better understand, my wireless network name is cleopatraiz

  On my laptop, I went into the wireless network connections through the status bar at the bottom right which displays all networks wireless scope.  I clicked on my wireless (cleopatraiz) and it prompted for the wep key.  I entered that and then I went into newwork & Sharing Center, was now showing my active network as cleopatriz, I clicked on choose home group and sharing options and joined using my password of the Group House of desktop computers.  It worked.

• does win 7 64 bit support all software and 32-bit drivers

  Are all the drivers and compatible software in win 7 32 bit also capable in 64-bit?

  Are all the drivers and compatible software in win 7 32 bit also capable in 64-bit?

  N °

  You need 64-bit drivers to a 64-bit version of Windows. the 32-bit drivers do not work.

  With application programs, * more * (but not all) 32-bit programs will be running under 64-bit Windows, but some mainly (games and utilities) will not.

• I have win 7 on the drive D and XP on drive C. I want to remove win 7 but it put all the stuff security of win7 on my XP (share security, audit, etc. If I remove win7 it will mess up to my XP

  I've updated TO WIN7 ON xp ON MY DRIVE c. DID NOT LIKE WIN7.  moved c DRIVE TO d c AND INSTALLED a NEW DISK WITH xp. Some HOW WIN 7 SECURITY (AUDIT, pARENT CHILD STUFF WOUND ON MY DISK C. xp etc if I REMOVE WIN 7 OF MY D DRIVE WILL IT SCREW UP MY XP ON c?) I'll be able to get the regular sharing XP back. I can't share all the files with my other calculation with all Win 7 security stuff.

  Hello Method 1: You can check the link below: How to use the backup utility to back up files and folders in Windows XP http://support.Microsoft.com/kb/308422 Method 2: You can check the link below: How to uninstall Windows 7 http://support.Microsoft.com/kb/971762 I hope this helps!

• Problem USB Qosmio F60 - 10K

  Hello
  .. .and all usb ports suddenly decided to not recognize whatever it is attached as a mouse, external HARD drive. The funny thing is that ports are in fact alive since they provide the power and they appear in the Device Manager window.

  I tried the following

  (1) update the BIOS
  2) updated the chipset
  (3) checked the plug-and-play service
  (3) uninstalled usb ports and installed their return
  (4) disconnected devices and plugged their new
  (5) disconnected power cord and battery and plugged them back
  (6) check the external devices, has worked on another PC
  (7) prayed for divine intervention

  None of the above has worked

  Everybody out there to help?

  Thanks in advance

  Hello

  Everything you tried is right. as a final step, try the magic solution that helps to install OS original Toshiba recovery to help image.

• Qosmio F60 - 10K and the SSD speed

  Hello I have a new problem xD maybe not so great :)

  I bought Mushkin SSD 240 B speed Delux Calisto is 285/275...
  I have install Windows will receive with my laptop via Recovery DVD and I put out-of-box installation, my SSD speed benchmark is 200 about 150/145 and no more as I bought it I read somewhere it's not good for the SSD put in IMAGE and recovery CD Toshiba Windwos shoe IMAGE and I think it is for this reason It decreases my speed of SSD.
  So quastion is how solution maybe put on SSD speed over 200 MB is install fee Windwos 7 not out of box or?

  Btw2... I want to crypt my SSD with TrueCrypt 7. 0 has... How this decrease my SSD speed if anyone knows.

  Thank you to all who help me, final problem that I put on this forum has been resolved because nice people :) all ty!

  Hey,.

  Of course you can test it with your own installation of Windows, but I doubt it s a problem with the operating system preinstalled Toshiba. I mean this image is tested and configured for your laptop

  In your case, I would also check the version of the firmware of your SSD. There may be an update for it.

  Also, make sure that the version of the BIOS of your laptop is newer.

• How to clone a 32-bit Win 7 HDD on a new hard drive Win 7 64 bit and maintain the 64 bit OS?

  Running Win 7 Home Premium 32 bit, want to CLONE the data and programs for the new Win 7 Home Premium 64-bit computer. I'm "fears that the process would clone the 32-bit operating system, thereby losing the advantage of the 64-bit system."  Is there a way to do it, or am I stuck the data migration and resettlement of residents programs now on the old computer?

  Sunday, October 28, 2012 16:41:37 + 0000, Howard Mead wrote:

  Running Win 7 Home Premium 32 bit, want * CLONE* data and programs for the new Win 7 Home Premium 64-bit computer. I'm "fears that the process would clone the 32-bit operating system, thereby losing the advantage of the 64-bit system."  Is there a way to do it, or am I stuck the data migration and resettlement of residents programs now on the old computer?

  No, there is no way to do it. You can move the data to the new computer
  but you can't do anything with the installed Windows 32-bit or the
  installed program. Everything must be installed from scratch.

  Ken Blake, Microsoft MVP

• Trying to activate Win 8 64-bit Pro - get the product key of message is blocked

  When win 8 came out I bought 3 licenses at the MS retail store and a retail OEM from Newegg, at the time

  I installed it on a computer that is working great, but chose not to install the other 3.  Last week, I decided to build

  a new system and installed win 8 stationary Pro when I try to activate with one of the remaining licenses I get

  Error code: 0xC004C003 specifying this product key is blocked. What can I do to be able to use these keys.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• 280 G1 Micro Tower HP: Chipset driver needed for HP 280 G1 Micro tour Win 7 32 Bit Driver on the HP Sup site does not work

  Driver chipset on the HP support site does not load correctly.  All other drivers will charge properly.    Can someone point me to a chipset driver that is installed correctly?

  Thank you!

  Hello:

  Try the one directly from Intel...

  A 2nd on the left side of the page is the automatic installation file.

  https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-