Qosmio F60 - 11F - Long startup time

Similar Questions

• Re: My Qosmio F60 - 11f is VERY SLOW and stuck all the time

  Hi everyone :)

  I have a qosmio f60 - 11f with 2.26 to 3.3 with turbo i7
  6 GB of Ram
  640 GB HHD
  1 GB Nvidia GT330M graphics

  the problem is that since I bought it and its slow I don't know why!
  Now the laptop over 14 months and I did a lot of recovery time because of problems and stuck, I him.
  last day I did the cover and I noticed that the laptop is becoming slower!
  It takes about 5 minutes to get started! not only that, after started and open any folder you will notice how slow it is. Even in the videos I can't open it because the laptop will be stuck and play the video very very slow!
  Please help me.

  Hello

  First of all I recommend to check the HARD disk for disk failure HARD errors that may affect the performance of the computer, you should check the HARD drive using freeware tools one of the tools that I use is the Drive Fitness Test he has been published several times here in the forum and its really great software.

  If the HARD drive would be ok and if no error would be detected, then, I recommend disabling some processes that are not important for you in many cases different tools would be charged during the OS start process and these tools run in the background that slow down the operating system.
  Run msconfig and check the Startup tab
  Here you will see all the programs that are loaded at the beginning, you can uncheck the tools is not necessary

  Note: If you are not sure what means the only process, use google and search in internet for more details otherwise don't disable this.

• Qosmio F60 - 11F - problem of failure of HARD drive for the 3rd time

  Hello

  My Toshiba Qosmio F60 - 11(f) does not continue 6 months with me until a HARD disk failure that happens with the same massege (failure of HARD drive on disk0 hard to predict Intel SMART)

  I took my laptop to the service center for 3 times now, and I would like to fix this kind of problem for good and do not reproduce.

  Qosmio F60 - 11F
  Serial number: 6A093786H
  E-mail: [email protected]

  Thank you

  Hello

  The HARD drive may begin to malfunction because it s a part not reusable.
  I'm not very well why the HARD drive starts to malfunction in these times early in any case the party m can be replaced very easily and usually you don t we had to send the laptop to the ASP.

  Get in touch with an ASP and ask compatible HARD drive. If it s covered by the warranty, you should get so much for free, otherwise you will need to purchase these parts.

  However, here you can check how to replace the HDD:
  * Qosmio F60 HDD *.
  + http://aps2.toshiba-tro.de/kb0/CRU07030A0000R01.htm+

  welcome them

• Qosmio F60 - 11F - problems with installing the drivers Win7 64 bit

  Hello again.

  I have a Qosmio F60 - 11F and I install * windows 7 ultimate 64 bit *, I installed all the drivers from the Toshiba site,
  and I am facing a problem with some drivers,
  1 - BIOS update v B2.10 - EC1.60 the message "this computer not supported.
  2 - v Eco Utility 1.2.11.64 the message "no supported BIOS.
  3 - PC Health Monitor 1.5.6.64 v & v 1.6.0.64 the message "not support".
  4 - TV Tuner v 2.3.3.31 nothing happens.

  Can anyone help?

  Have you installed the Toshiba value added Package?

  You need the correct PVAT designed for the Qosmio F60 and Win7 64-bit. Take a look at the Toshiba site (section support/drivers).

• I need to install TOSHIBA Recovery Disc Creator on Qosmio F60 - 11F

  Hello.

  I have a Qosmio F60 - 11F and I install windows 7 ultimate 64-bit, I have installed all the drivers from the Toshiba site.
  I need to install the TOSHIBA Recovery Disc Creator & TOSHIBA Recovery Media Creator utilities; I search in the Toshiba site, but nothing is there.
  Can someone help me to download these utilities?

  Why do you need these tools?
  If you have installed your own version of the OS, these tools are useless, and for this reason, they are not available for download and installation.
  These tools, you can have if you install Toshiba recovery image only.

• List of drivers for the Qosmio F60 - 11F

  Dear all,

  Please provide me with the list of drivers for my laptop Qosmio F60 - 11F as turbo booster etc.

  Kind regards

  HK

  Hello, HK,

  You can find a list of all tools on the official website of Toshiba and pre-tested drivers:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  Laptop > Qosmio > Qosmio F Series > Qosmio F60

  Then choose the operating system and you have a list all the drivers/tools you need :)

• Qosmio F60 - 11F - FN key does not work

  Hello

  the FN key in my laptop suddenly does not work and so I can't use with combination keys to control my laptop. I tried to make it work with the HWsetup, but there is nothing special for her in the keyboard tab

  I went to the download page for the driver to try reinstalling the driver, but I could not understand what driver should I download

  How can I make the FN key still works?

  My laptop is Qosmio F60 - 11F

  Please check if you can find the option restart Flash Cards in the start menu > all programs > Toshiba > utilities. If you have please use it to restart. If this will not help, try to reinstall Toshiba Value added Package. This package contains the utility of Flash Cards.

  Post comments.

• Qosmio F60 - 11F - drivers for Windows 7 32 bit

  Hello.

  I have a Qosmio F60 - 11F and I install windows 7 ultimate 32 bit, and I am facing a problem with all the drivers.
  I am looking for in the section of the driver support in the Toshiba site, but I found only bluetooth, also I need for Windows 7 32-bit power management.

  thanx

  Hey,.

  AFAIK Qosmio F60 is pre-installed with Windows 7 64 bit...
  This means that you have installed the 32-bit version of Windows 7 but why? Normally the 64 bit OS is the future and supports only 4 GB or more of RAM. 32-bit is pretty obsolete for such a new notebook performance

  I think that's the reason why you can t get all the official drivers Toshiba page because it of designed for the 64 bit OS only

  If you really want 32 bit you must search for the drivers yourself on external Web sites.

• Qosmio F60 - 11F - driver to connect to the local network

  Hi everyone help pleae this.

  I have a Qosmio F60 - 11F model and I have install Server 2008 Enterprise and I am facing a problem with the driver to connect to the local network.

  Please help on this issue.

  Hello

  Go to Device Manager and identify the provider/device id:

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  Then, perform a search on the page of the driver provider.

• Qosmio F60 - 11F - formatting - this driver to install?

  I'm planning on formatting and reinstalling windows on my Qosmio but I found the list of drivers in the section download too long (approximately 40 driver installation files) that I have to install all these files?

  Hello

  Most of the tools that you have found on the list is apps and tools of Toshiba
  To be honest, you need just a few common drivers as display driver, LAN, WLan driver touchpad, driver chipset, card reader to get the laptop working properly

  But if you want to use the features of the entire laptop and multimedia keys, FN keys, face recognition or the HARD disk protection tool, you must install the other tools in the list

  On the Toshiba European pilot page you can find all the drivers and the software if you click more information in the columns on the right, you will find the details for each drivers/software

• PC Windows 7 after authentication of login take longer startup time for show desktop

  My PC takes longer to show desktop. It's really annoying. I want ot fast to the top of my PC. According to me, it's a starter problem or due to a lot of useless data. Below more details on my PC Configuration:
  ------------------
  Information System
  ------------------
  Time of this report: 06/01/2012, 21:32:21
  Computer name: USB - PC
  Operating system: Windows 7 Home Premium 32 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.111025) - 1505
  Language: English (regional setting: English)
  Manufacturer: Hewlett-Packard
  Model: HP Pavilion dv4 Notebook PC
  BIOS: Default system BIOS
  Processor: Intel (r) Core (TM) 2 Duo CPU T6600 2.20 GHz (2 CPUs), ~2.2GHz
  Memory: 4096 MB RAM
  Available OS memory: 3038MB RAM
  Page file: 2180MB used, 10856 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 32 bit Unicode

  Hi GOWTHAMU. S,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Disconnect all external devices and try to start the computer.

  Method 2: Run the troubleshooter of performance.

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 4: Follow the steps in the article.

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  Method 5: Update the chipset and other drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• long startup time ESXi

  Hi all

  can you help me please

  When I restart for all hosts it take a lot of time at the start of gain

  specified not in photo

  Title edited by: Tim Scheppeit

  Good morning Sir,

  You have improved your environment recently? or can you let me know you use RDMs in your environment? You presented RDM to your environment recently?

  If so, you should make sure that the associated LUN got the reserved flag set to false Perrenially-

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1016106

  Already updated hosts ESXi 5.1/5.5

  To mark LUNS MSCS as perpetually booked on a 5.1/5.5 ESXi host already set to level, set the flag perpetually booked in profiles of the host. For more information, see the vSphere Checklist installation of MSCS in the Documentation centre of vSphere:

  Guide to management of vSphere resources 5.1

  5.5 vSphere resources management guide

  

  Guest accommodation with RDM LUNs MSCS nodes, use the esxcli command to mark the also perpetually reserved device

  esxcli storage core device setconfig -d naa.id --perennially-reserved=true

  Note: stateless auto deploy wipes all settings at the beginning is not possible to define the perpetually reserved indicator, which leads to a big delay in the start-up. However, this command esxcli can be incorporated into a local startup script.

  esxcli peripheral basic storage setconfig d naa.id - perpetually reserved = true

  -----------

  To check that the unit is perpetually booked, run this command:

  esxcli storage core device list -d naa.id

  This will be performed on all the LUNS with an association of RDM on all hosts.

  Hope this helps

  Vdex

• BlackBerry smartphones long startup time on "BOLD", how to shorten?

  How a phone taking a few minutes to start up can be rectified. We know it please

  It is impossible. This is the time required.

• Qosmio F60 - 10K - accurate pilots or recovery disk

  Hello

  I recently purchased this model, however had a few problems with HARD drive and had to format entirely. Resume function is therefore lost. Could not find the exact drivers for this model and as I used the drivers I found under name Qosmio F60, done computer startup laptop over a long time and Win Experience index is low enough.

  So the question is, where I could find the exact drivers for Toshiba Qosmio F60 - 10K or order recovery DVD/BD?

  Hi s0vijus,

  If you are looking for accurate drivers, it would be very interesting to know what operating system you are using. Drivers for Windows 7 32 bit and Windows 7 64-bit are different so it s important information. Normally everything can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Last but not least you can order directly here Toshiba recovery disc but it s not for free:
  https://backupmedia.Toshiba.EU/landing.aspx

• Qosmio F60: EasyControl bar no longer works after reinstall OS own

  Recently I did a clean reinstall of Windows 7 (64-bit), so miss me all the bundled Toshiba software.

  On my Qosmio F60 EasyControl bar no longer works accordingly (the buttons work again, they just don't have any effect on the volume, mute etc..).

  Does anyone know how to fix this?

  I guess that it may require simply download and install the driver from Toshiba, but I'm not sure that something is.

  Any suggestion would be appreciated.

  Hello

  What exactly do you mean by EasyControl bar?
  Do you mean the bar that appears just by pressing the FN keys?

  Have you installed the package of value added?
  If this is not the case, to do this.

  Pilots should be available on the European driver Toshiba page.