Qosmio F60: EasyControl bar no longer works after reinstall OS own

Similar Questions

• EliteBook: portable pen no longer works after reinstalling windows

  Windows 7 crashed the week last on my Elitebook.  I have re-installed and now my pen to laptop no longer works.  Can anyone help?

  Thank you.

  Product # XU102UT.

  I was able to get a solution.  It seems that when Windows 7 is re-installed which does not include the Wacom driver, which apparently HP uses because apparently HP fired the pen, etc. from Wacom.  So after a couple of hours trying to navigate on the site of HP, I found a download link to the supported Wacom driver and I managed to do the work.

  Thanks for responding.

• Sound no longer works after reinstalling Windows XP

  My hard drive crashed, so I had to reinstall Windows XP. My sound no longer works, and I've tried everything... followed all instructions and advice from support and still NOTHING. My devices does not even appear in sounds and Audio devices... all grey so I can't make adjustments. In Legacy drivers, it is completely empty... I can't not try hard. Help, please!

  You need to install device drivers for example chipset motherboard, graphics card, map its etc go;
  (1) cd is included with your PC
  (2) the site of PC makers, so a large OEM Dell, HP or laptop - specific to your model, for example
  (3) the sites of manufacturers of equipment if a generic PC

• Menu bar no longer works after upgrade to Firefox 20.0.1

  I am a site owner web thedjhookup.com .
  After the upgrade to Firefox menu 20.0.1, has completely stopped working.
  I am running Microsoft Windows [Version 6.1.7601]

  It works in all other browsers. If I change the code, I can break it.

  One might think that, but the library of objective deprecation.js purely Firefox. Check the #15 line in the comment block. You can confirm by looking at the init function:

    init: function(deprecatedMethods) {
      if (!Prototype.Browser.Gecko) return;
  

  'Gecko' is the Firefox rendering engine and does not correspond to IE or any Webkit-based browser. So if it's not Firefox, out of the library of disapproval.

  Ready to test?

• FN keys no longer work after reinstalling Windows

  After a reinstall of windows that my fn keys are not all work, some do, but the little icon which appeared which shows the process of fn key while using it does not either

  Should which driver I reinstall?

  Thanks in advance

  You must install the utility of Vap and flash card support, then

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Gmail no longer works after reinstalling the operating system

  I posted on a forum for Gmail and no one answered. But on the fact that I can access these gmail accounts via web browser and Microsoft Office, I think there must be a problem with the configuration of Mac. I'd like some suggestions to solve my problem!

  Recently, I have reinstalled the OS El Capitan on my MacBook Pro 2013 retina. Before the reinstall, I could access all my Gmail accounts through the native application of Apple Mail. Since then, I couldn't access any of my Gmail accounts via Apple Mail.

  I tried to disable the two-step verification, but which is not resolve it.

  I deleted all count them several times and follow the steps below, but still can not get added (don't say one of the definitions to be insane is doing the same thing twice and expects a different result?

  Here are my steps that I take every time:

  When I connect, I use my Gmail password.

  Accounts/new Internet account

  Select Google

  Enter my user name and click Next

  Enter my password (not the specific app password, but the password for Google. I tried both and he always tells me that I have to use the Google password.)

  Click next

  The dialog box then says "select the applications you want to use with this account (and the logos of Google lies at the top of this box.).

  My options are:

  Mail

  Contacts

  Calendars

  Messages

  Notes (all logos Mac for those apps)

  All are checked, but I uncheck everything except Mail

  Click done.

  The gray button 'Complete' on

  Finally after that probably 60 to 90 seconds, I get a message through Mac OS that says 'Google account you added'"[email protected] has been added.

  In this box, I gives me the options of 'Not now' or 'enable '.

  If I select 'Enable', then I get the message through Mac OS that says 'Google password required'. I get my password, and the cycle repeats again and again.

  If I select "Not now" then the account appears as 'Inactive' in my list of accounts on the internet. Once I selected, I am immediately invited for the password... and the whole process starts again.

  Facts:

  Accounts are active IMAP.

  Accounts have two factors of authentication disabled. If I turned it on, the same things happen, with the only exception to receive messages and receive through my method to deliver, security code, but once I entered it, it can still access my mail.

  I have four other Gmail account, and what is happening in the same way with them all.

  They are all very well via a browser-based email

  They are all accessible through my iPhone and iPad.

  I can't access any of them through the native mail app Apple.

  They are all accessible through Microsoft Outlook e-mail client (2016)

  I even tried to disable the option to allow 'less secure apps.  I tried it on and outside, and nothing works.

  I'm ready to give up all my Gmail accounts at this point.

  Any ideas (other than to get rid of Gmail!)

  If you have not tried this, after completing the settings, try to delete Internet accounts. Go to Mail/preferences/accounts, and then add the accounts there.

• R12 login page no longer work after reinstalling VMware

  Hello

  I installed 64 bit 6.3 OEL and R12 12.1.3 successfully installed and was able to connect in R12 of Linux (guest) and Windows 7 (host).

  Due to a problem with the updates of Windows 7, I had re installed Windows 7 and then installed VmWare on it. Then I loaded the saved file vmware in Vmware workstation, but this time R12 login page does not work both OEl and Windows 7. I changed the IP in/etc/hosts.

  Error: the server has encountered an internal error or misconfiguration and was unable to complete your request.

  I am new to linux and EBS r12. Is there a solution to solve the problem.

  If you have changed the IP address then you must purge the FND_NODES table and run AutoConfig on demand/database layer nodes.

  How to get a clean auto-configuration environment? [391406.1 ID]

  How to clean non-existent nodes and IP addresses ranging from FND_NODES [ID 260887.1]

  Thank you

  Hussein

• Dell XPS 14z 3 USB port no longer work after reinstalling windows

  Hello

  I have re-installed windows on my XPS 14z,

  Installed all the drivers (chipset Inc., bios, etc.).

  updated all windows updates.

  but the driver of the USB port of the SS was not installed. (you can see on the device as "Universal Serial Bus (USB) Controller" Manager without driver)

  I've looked everywhere, I tried Dell PC checkup, pilot automatic search etc.

  On these forums, I saw a similar problem with the XPS 15z and tried their solution without success.

  can someone point me to a driver?

  Thank you

  Hi Avp40,

  Has solved my problem when I re - installed "Texas instruments TUSB 7320" driver from the driver disk.

  Hope this helps you.

• URL Bar Search no longer works after update and no research options available!

  URL Bar Search no longer works after update and no research options available!

  "URL Bar Search" which is an extension? Or are you referring to the address bar, sometimes called the address bar?

  Let's try a few basic trounleshooting.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click on the menu button , click Help , and then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  Let know how's going on.

• FF 3.6.6: address bar no longer works - help?

  After updating Firefox version 3.6.6 on Windows XP SP 3, the address bar no longer works to navigate to pages. When to enter in any URL and pressing on enter, the page reloads with google.com (which is my home page in FF). By clicking on certain works of bookmarks. However, navigation in Google search results does not work. I tried to reinstall. Also, I tried to start safe mode. Nothing helps. Any help would be greatly appreciated.

  This has happened

  Each time Firefox opened

  After updating FF 3.6.6

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.5; Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1))

  I solved the problem by changing the proxy settings of "automatic detection" in the network configured screen.

• Safari address bar does not work after last update 10.11.3

  After Jan 22 10.11.3 update, Safari bar only displays address of active Web site.  Trying to navigate or search fast by typing in the address failure bar.  No result of the action.  Only recharge functions icon to reload the existing page.  Anyone else see the same?

  When you open a new window, the address bar works as it should.  Once a page Web (URL) has been surfed the address bar no longer works correctly.

  Hey! Take a look at this. This temporary has helped a number of users here. Over time, everything should be resolved then wait for a while.

  A possible solution to the problem of address bar: disable the Safari Suggestions

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

• Touchpad no longer works after the clean boot

  Own, I started my laptop today, following the steps on http://support.microsoft.com/kb/929135. After the first reboot in clean boot my laptop touchpad scroll bar stopped working. I can now scroll using only the arrow, or quiet mouse clicks on the arrows at the end of a ScrollBar to the screen. In addition, I can't select any text with my touchpad now. All this happened after the boot process. What has gone wrong? How to fix?

  Original title: scrolling Touchpad no longer works after the clean boot

  Hi lauranne.

  What is the brand and model of the computer?

  I would like to put the computer into normal mode and check if your able to use the touchpad.

  See the section "How to reset the computer to start normally after a boot minimum troubleshooting"

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  If you still have questions, please refer to the article to give below, and follow the instructions.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you more

• VPN access no longer works after upgrade from 10 IOS!  Any input to fix?

  VPN access no longer works after update IOS 10!  With the help of an iPhone 5 or 6, our employees use their hotspot phone to connect to our VPN.  Suddenly, he broke Monday after the upgrade to IOS 10.  We have experienced many versions of IOS, and it has always worked.  Any patch available?

  Hello howlindaug,
  Thank you for using communities of Apple Support.

  If I understand your message that your employees will no longer be able to connect to your virtual private network with their iPhone 5 or 6 after the upgrade to iOS 10. Sierra Mac OS and iOS 10 delete a VPN profile PPTP connections when a user upgrades from their device. If your VPN is a PPTP connection, you'll want to use one of the options listed in the section below:

  Prepare for removal of PPTP VPN before upgrade you to iOS 10 and macOS Sierra
  

  Alternatives for PPTP VPN connections

  Try one of these other VPN protocols for authentication by user that are safer:

  • L2TP/IPSec
  • IKEv2/IPSec
  • Cisco IPSec
  • VPN SSL clients on the App Store, such as those of AirWatch, Aruba, Check Point, Cisco, F5 Networks, MobileIron, NetMotion, Open VPN, Palo Alto Networks, Pulse Secure and SonicWall

  Best regards.

• Address bar no longer works

  The address bar no longer works when you enter an address, or the selection of recently visited sites, the only way I can visit a site is to use Google to find the URL and then click the search results

  Thank you

  It seems that the culprit is Tab Utilities 1.58.28.1 as having disabled all extensions and restarted the problem only occurs when this particular extension is enabled

• Suddenly a few keys on my new Qosmio F60-10 q do not work

  Suddenly a few keys on my new Qosmio F60-10 q do not work (a, e, r, t, y, i, o, z, b, n, arrows, enter, Fn, NumLock...). These buttons do not work even in the bios: when I want to exit the bios must press on Y or N key and still does not. Help, please. Mention that the laptop is new.

  Contact the Asp in your country.