Qosmio G10-133: the blue lines on screen

To all those who can help you:

I turned on my Qosmio yesterday to find a series of unwanted blue lines, distorting the Qosmio logo. Lines and distortion continued until the operating system came at the opening of my office. At this point the whole system locked and the screen went completely blank.

The Qosmio player suffers from the same problem. The boot system, but crashes when the display is asked to do something.

I can open the operating system in safe mode, but the lines still appear to a lesser extent on the screen.

I have run all the tests and has been through the manual troubleshooting section. I tried to reinstall the drives and roll back to the previous facility. But, for all that I try, nothing will change.

Qosmio my friend did exactly the same thing a month or two it is a. Solution from Toshiba was to replace the motherboard.

My Qosmio is still under warranty, and I am very happy to send it because Toshiba has one of the best customer service I've had to face.

But, I was wondering if anyone had any ideas?

Thank you very much.

Hello

I also very pleased with the customer support service Toshiba m.
I think that the simplest and the best way to resolve this weird display problem is to bring the unit to the ASP. Laptop you is guaranteed to be protected and a replacement is free.

Good bye

Tags: Toshiba

Similar Questions

  • No big screen in Windows Media Center on Qosmio G10-133?

    Hello
    I just set up my Qosmio G10-133 to watch the TV via a set-top box Freeveiw. However in Windows Media Center, I can't see it on the big screen. If I veiw the same programe in the Toshiba drive I can veiw on the big screen OK.
    Any help with this would be much appreciated.
    Thanks in advance.

    Hello
    Can you please check in the BIOS settings if there is option called display stretching or something like that?

  • Qosmio G10-133 - do you need part no keyboard

    I have a Qosmio G10-133 for about 5 months, but unfortunately a small image fell and damaged the keyboard. He broke up a key, fortunately, and whoever is not much used. The | ------key. But it's always a pain. I could ask on my household insurance, but I won t.

    I'm trying to find the correct part number. Is it easy to install a replacement? Recently, I changed a hard drive for a friend in another laptop, and remove keyboard replacing seemed very easy. What is - this as on the Tosh?

    [Edited by: admin October 9 05 13:36]

    Hello

    I think you should contact Toshiba service partner. They can give you good keyboard and maybe you can get a used one for less money.

    Good bye

  • Satellite P300-150 - blue lines on screen

    A question on my blue screen but as a non geek computer havn't a clue how to describe. Here goes.

    The normal white screen of my computer began to appear with the shifting of the blue lines through it. However when I push my computer screen laptop back to my lap screen is stabilizing and is normal.

    Hello

    This means that if you have the screen, the image will not display correctly? Is this good?
    And what you mean exactly with white screen exactly?

    Right now it sounds like that the LCD cable has a loose fitting and should be replaced. Therefore, you can contact a service provider allowed in your country to replace this part.

  • Qosmio G10-133: where to find NVIDIA GeForce FX Go6600 Vista drivers

    I have a Qosmio G10-133 with the motherboard upgrade which I believe has the Nvidia GeForce FX graphics chip Go6600, not the old motherboard which had the chip 5900.
    I'm trying to find a recommended driver for this chip when using Vista as an operating system.
    I know that Toshiba is no longer supported this discontued model and certainly do not have the drivers on their website.

    Anyone got any ideas where I can get a suitable driver, or even if there is a.
    Site Web de NVIDIA simply States that the computer manufacturers portable invidiual adapt drivers for their chips and do not provide a driver.

    Any ideas?

    My understanding of the Toshiba doesn't support Vista drivers for the Qosmio G10 The Vista seems to be supported since the Qosmio G30 series

    I read several threads on the compatible graphics driver for Vista OS and Web site _ www.laptopvideo2go.com _ provides some nVidia drivers.

    But note; These drivers are not tested and so you can install and use at your own risk

    Best regards

  • the blue blocks on screen and open to other sites.  any info?

    the blue blocks on screen and open to other sites.

    I'm sorry, but I don't know what you mean by "blue blocks.  You can take a screenshot of your browser window when this happens?  What websites you find it on?

    You take a screenshot by pressing Command + Shift + 3.

  • What are the blue lines in the edition of flex?

    What are the blue lines in the edition of flex?

    They are markers of flex tempo... Info of tempo based inserted automatically embedded in the file. If you want to remove

    Edition->-> remove tempo tempo. -then reset flex markers

  • Qosmio G10-133 & Vista can't recognize my memory stick

    Hello

    I installed VISTA on this laptop, and I had a few problems that you can imagine!

    I can't recognize my memory stick. I can't find the drivers and that Windows is unable to solve the problem.

    Someone got clues?

    I'm also having a problem if I turned the laptop off. The only way I can get the power on button to work is to remove the power cable and the battery and then I turn on the laptop. If I don't take the power cable and the battery I get the green light on the power button, or no light at all, and by pressing seems to do nothing. I also have an orange light blinking on power light on the front of the laptop. I guess it's something to do with the thought of the computer it has hibernated or something?

    What to say to boyfriend.
    The Vista is not officially supported on the Qosmio G10 and the Vista drivers don t series there for this series.
    Always is it that you need a card reader driver to use the memory sticks. But as I said above, these drivers are not available and don t exist.

    What you can do is to check the drivers for G30 but I'm very skeptical that it will work on the G10.

    Good bye

  • How to remove the blue line, the Date and the name of your Signature blocks?

    We would use esign for documents; However, these documents are dated elsewhere and the signature should not be dated. Is there a way to turn the blue line, power in esign etc on and off? Thank you!

    Hi Lillian,

    Then, it seems you are the user and does not take into account admin. Pouvez you inbox me your email address recorded so I can verify your account?

    Kind regards

    -Usman

  • How can I remove the blue line after the deletion/change the link?

    I deleted the link and delete the text in the url, but still have the blue line, if you're wondering how delete/modify it.

    Generally, you may not. At the time wherever they go to PDF format, the link, text, and line are three things unconnected.

  • Qosmio G10 begins with vertical lines on the screen

    Hello, can anyone help?

    When I try to start my sign qosmio G10 comes on with vertical lines on the screen. And the screen goes black and I can only hear the fan.
    In VGA mode, it begins upward, but always with the lines on the screen.
    Is there something wrong with the video card? In my view, that there are more people with this problem.
    Toshiba offered little help?

    I'm 'out out of warranty '. I need to by a new complete motherboard or y at - it another option? Replace the video card?

    Hello

    Its a shame about the warranty because you ask the service partner Toshiba for the verification of the laptop and this procedure would be free. You know, the warranty would cover the audit of the laptop.

    But I would say the external display connection and then you can check if the same vertical lines appear on the external display.
    If you see the lines on the second monitor, then I guess it could be something wrong with the graphics card or motherboard.

    I think that this procedure is the best way to find out what could be the problem, but anyway, I think you should ask a technician for assistance if you want to solve this problem.

    PS: Have you tried to reinstall or update the graphics driver? I think you should do it but I don't know if it will help you, but you know Mr. try is free ;)

    One of my friends had a similar problem with the vertical lines on other mobile manufacturing, and it was a WLan cable which was responsible for the strange lines on the screen.

  • Qosmio G10-133: black bar in the middle of the screen

    I had a display of my G10 problem before, last year the malfunction just screen to a point where it would remain empty and I have to constantly push the display button to make it work. Needless to say that I sent and Toshiba has replaced the graphics card.

    But now I have another problem of display. An hour ago, I was using my laptop and all of a sudden a massive black bar, would say about 7 to 8 cm wide appeared in the middle of my screen. I tried a fresh install of the operating system, update of the graphics drivers, but its still there. If I turn on my laptop to the phases of the white bar to really show the full screen again in a black bar.

    Someone has an idea? Any help would be greatly appreciated.

    Kind regards
    Rhys

    Hello

    before we can send you a better feedback, will you please connect an external monitor to your laptop and let us know if you have the same black bar there?
    Could you also start your laptop and enter directly into the BIOS settings. Is there a false image, too?

    Concerning
    chain

  • Qosmio G10-133 - Install Qosmio Player and using the recovery disk

    Hi again.

    My g10-133 was the mother of uypgraded installed by Toshiba that there are back and forward in his first year with problems of graphics chip, so they installed the motherboard with the 6200 chip chart.

    Until very recently, I installed Windows XP to one of my dead computers that I've ever had anywhere with my original recovery qosmio disc such that it has been damaged. I recently bought an other G10 as I wanted to replace the keyboard and display and it came with disks,

    I put in a raw player. I used the recovery of the Qosmio player disc, and this indicates that it is complete. I then installed the Toshiba Recovery disk that has Windows MCE on it. (I have now three original copies of the present). But when windows go to start, the computer gets past the Bios and then quickly goes to the blue screen of death... I tried to use break so that I can read this, but it does not work. I tried more than a windows disk, but not joy. I also had special instructions for Toshiba, which has the Qosmio updater on him, and also another drive which has some additional drivers.

    So far, I've tried all sorts and whenever I go to start the laptop, it crashes. The Toshiba recovery disc has two methods that an automatic and a step forward on (which I don't have a clue how to use). The automatic, which does not implement the normal windows installation, but evokes a Toshiba says... and it goes from 0% to 100% and ends each time.

    If I use my Windows XP disk from another pc it install fine. and the laptop is fine until it reaches download Windows SP3, which seems to slow everything down.

    I would like to install the Qosmio to style factory if pos.

    What you need to help your service provider which has replaced the motherboard. A long time ago I heard talking of this and what I know is that the machine must be ready for use: This means service must update the BIOS, verify compatibility of memory, RAID functions are not the same, Bios, EC/KBC and DMI must be updated and rewritten. The laptop owner must be willing to work with new hardware components.

    If I m remembering well this new mainboard has different chipset and recovery image that you are trying to install has really bad drivers inside. With other words: after the Exchange system motherboard drivers and the Qosmio Player require an update.

    You know the whole process is a bit complicated, but, as far as I know, Toshiba service provider must send you instructions for Qosmioplayer update and instructions for the update tool.

    At the moment I can't help you. Please call again and ask for help. If you will not get any help it let us know.

  • XP update demolishes my Qosmio G10-133 screen resolution

    I'm running a two years old G10-133. Great and reliable machine. The reason why I bought it was because he has big screen resolution/sharpness for MS Word and Outlook emails texts.
    For various reasons that I do not download the MS Windows updates that are often available in a pop-up at the start (hint that they may bring more problems than they solve). In any case I have recently (despite running Norton Security all the time) picked up some kind of malware villain in Google which diverts approximately 50% of the links google after a search and then sends to an another search engine with links.

    The Norton firewall and windows not picking up these or clean them up, so I tried the free Spybot to get rid of them to no effect.

    Finally rang Toshiba Europe support and the guy he recommended that:

    (1) do not use Norton. Waste of time and money and slows down the machine. Download the new freeware Windows Defender instead.
    (2) do all the XP updates
    So I started with all the windows updates (charges), including Internet Explorer 7.

    Guess what, after restart the computer is a bit slow grumpy, but worse still, the screen resolution (sharpness and clarity of the text) has deteriorated in Word, Outlook and Explorer.

    So I called Toshiba support again (I'm on a contract of three years warranty) and they could not solve the problem or propose something and seemed surprised that happened. We checked the things of common screen resolution in control without result panels.

    Then I gave up, train of the restoration of the system before any updates.

    The computer is now stable and the resolution of screen back to where it was.

    Issues related to the:
    (1) can I get XP and 7 EXP updates and still get my old (better) screen resolution.
    (2) what to give up idea good/safe Norton for Windows Defender?
    (3) any ideas on how to prevent the diversion of Google links?

    Any help much appreciated

    Post edited by: holtom

    Hello

    1.) it's very strange and I have never heard bad display quality after the installation of the updates from Microsoft!
    I think you should try to contact the Microsoft support and maybe they know something about this strange behavior.
    But have you tried to update the graphic driver and/or BIOS?

    (2.) it is true. I installed the Norton System Works several months ago and my unit started very slowly with preinstalled Norton Antivirus.
    I removed and use and freeware AntiVirus application called "Antivir".
    I don't want to use the MS Windows Defender. But I'm not saying that this application is bad.

    (3) I don't know what you want to do, but I don't think it has anything to do with your Toshiba laptop ;)

  • Qosmio G10 134: the screen freezes after repair

    Hello

    Earlier my Qosmio G10 had to be repaired because of the vertical-bars-in-screen-and-broke-down-videocard-problem. They gave me a new motherboard and Nvidia Go 6600 and the problem was solved. I hoped... Because then I couldn't not to use the graphics card for more than 5 minutes.

    When I start playing a game, or so it takes 5, maybe 10 minutes in mind for my screen to freeze. Then precious is unresponsive to anything, even to the Microsoft-Magic-Combination-Ctrl-Alt-Del. very annoying to say the least... Does this sound familiar to anyone?

    Thanks in advance,

    Dave
    The Netherlands

    Hello

    I agree with the agramer. It is possible to s that you got different but better graphics card. On this page, I read that some users who repaired the laptop got a different card because the original of the delivered graphics card was off live.

    In this case, you should check your device for details of the map Manager and if necessary, you must install the right graphics card driver.

Maybe you are looking for

  • Lightning connector Pro 12 "iPad questions

    Recently, my iPad Pro started to produce the perception of noise... sound it plays when it connects to a power source... in RAPID FIRE succession.  The charging symbol flashes also next to the battery.  There is no cord in, but it is as it is, and as

  • need help for my Pentecost photos

    I am trying to make sure I did well... .i have two phones and I want to put all my photos on my mac

  • EPrint mail - how to transfer the e-mail address to the new printer

    Hi, I just want to know if it is possible to use the old mail to a new printer eprint? My problem: install my new printer-> installed eprint then I had some problem and decide to close and restard eprint result: my old address eprint (easy to remembe

  • VPN client and ssh to the external interface of the ASA

    Hello world I was testing clientless ssl in my lab at home. When you're connected via vpn without customer, I am able to ssh ASA outside interface, but when I use ssl vpn only I can't ssh to the external interface of the ASA. Need to figure out how I

  • Problem with interlocking entities

    Hi allI have problems with my locking entities. I locked them up to what Q2 but the problem is when I try to lock Q3. Some entities are as locked for the period of July. So, when I try to unlock July, I get the error next "node value for all parents