Qosmio G10-137: how to connect to the TV?

Similar Questions

• Qosmio G30-116: how to connect to the Sky Digital box to watch TV?

  I recently bought the Qosmio G30-116, with the understanding that I can connect my digital Sky to the laptop (somehow) and watch and record the sky on the laptop

  * note: I do not use TNT or TV I'm on SKY DIGITAL *.
  SINA the converter cable provided to connect the video in on the laptop (video is like a headfone Jack and converter converts to this female RCA/RCA)

  I connected on the laptop and then connect a RCA 3 SCART toward it then in the area of the sky, when you set up the TV section in Windows Media Center, I followed the instructions until it gets to the point where it scans a signal, (before that I wonder what kind of signal that I receive, I select digital but have tried all combinations in) but it does not find a signal.

  Now I was told that Windows Media Center doesn't support analog input and the connection between the sky and the laptop is analog.
  Is this correct or not? then, while typing this I learned by someone else that my laptop is not capable of receiveing SKY DIGITAl as it cannot decode or something. Is that also correct? If not, can what am I doing wrong, and someone help me to get it going? And I go about it the right way or I'm quite the wrong way if the laptop is capable of it?

  Hi Liam

  AFAIK if you are using an external receiver (sat receiver or even sky digital box) the laptop can bring out just what external device send to the laptop. You can connect your external case to the laptop using composite to the port (transfer of video and audio signals). After that, you can start Qosmioplayer and analyze the available channels.

  You will find a program, but the different channels, you must select the box itself. If a channel must be registered, use Qosmioplayer save option.

  The same must be possible with WMCE. I'm not 100% sure but I also think that the connection between laptop and Skype is analog.

  Sorry, but that's all I know about Qosmio. I tested it with Qosmio G20.

• Qosmio G10-137: blue screen after re-install using Recovery CD

  Hi all

  just got my qosmio G10-137 earlier this week after being under repair since the beginning of the month of January! Guys made the repair found no better then install the Dutch version of the operating system. I don't like this, then I took out my recovery CD and began the recovery. Everything works fine and I am asked to remove the media and reboot my PC.

  This beautiful laptop to start early and... Blue screen of death. Restarts, wonder how to restart... count up to normal reboot... BSOD... restarts, wonder how... I choose "Safe Mode"... BSOD... I choose the mode safe mode with prompt... the system.ini file is missing!

  It seems that the recovery CD is bogus.

  If someone has encountered this? Does anyone have any resolution?

  Kind regards
  Wim

  Post edited by: wvl

  Hello

  It s very strange because the recovery CD was tested and install several times. It should work without any problems.
  I put t know where you come from, but the service partner should install the Windows operating system in the same language. In this case, if you bought the device in Dutch the recovery CD and the OS are in the Dutch language.
  Please note that you must use the same recovery CD that came with the device. Another recovery CD will not work.
  What you can do is to test the unit with an original CD of Microsoft Windows. It would be very interesting to know if the blue screen appears with the original Windows.

• 1024 MB of memory for Qosmio G10-137

  PA3313U-1M1G is for 1024 MB of memory 333 Mhz DDR partnumber.

  can I also use 400 or 533 Mhz DDR memory for the Qosmio G10 - 137 met a Centrino Intel Pentium M 755 2, 0Ghz 2 MB cache 400 Mhz processor?

  Hello

  As far as I know, you can always use the Ram module with more, but not less then suggested value MHz.

  Good bye

• How to connect to the server from VPN Windows Sever?

  Hey guys, I recently created my own VPN server to connect to my home network using Windows Server 2003. I know I probably still need to do this if I don't know what I have to do, but how to connect to the server, or at least set it up in order to be logged in? I think I got the computers communicating with each other, but I think that I am running into errors of authentication. Could someone point me in the right direction with regard to what I have to do what I already have Setup? Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Need to know how to connect to the internet, anywhere

  Original title: internet connection on laptop

  10 years ago, I got a laptop and was able to connect to the internet anywhere I went. I don't remember how I was able to do it without a motem

   

  Hi Susan,.

   

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  Want to know how to connect to the internet wherever you go.

  You can use USB dongles to connect to the Internet via a wireless connection.

  We need more information to help you better:

  What version of OS are you using?

  You can use your favorite search engine to search for USB dongles.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also contact an Internet service provider for assistance.

  I hope this helps. If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

• How to connect to the database

  Hi all

  I use labsql (and quite new to him m) and the server Mysql 5.1.I wanted to know how to connect to the database without changing the name of the dsn from the tools administrative/ODBC 5.1 driver manually. I want to install exe in several PC and it would be a great help if I could make the connection directly but my Vi.

  I went through several forums and came to know that 'Provider = ProviderName; Data Source = DatabaseSource; Initial Catalog = DatabaseName; User = username ID; Password = password', should solve the problem. But where in my case I m still confused. The connection string above does not sit well with me.

  Can someone help me please.

  Have a look here, where I have such a picture to show how to form a string constant to connect to the database. Some subsequent posts in this thread should also be useful.

  Good luck!

  Ian

• using the KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Hello

  I use KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Unfortunately, you can not connect a keyboard wirelessly on your TV. Your TV will need a driver for this. Sad thing, it's impossible to install anything on the tv, which includes the driver for the external devices such as a wireless (except USB) keyboard... I recommend the SIDEVIEW TV application that has the remote control / function keyboard and mouse... this app is free and can be downloaded via Google Playstore... ^^.

• How to connect to the PC?

  I have problems connecting my crush to my computer. At first I thought it was the SD card, I bought at the store of the cell - I went and bought a new one, that does not work. I put both cards and reading the manual. However, when I insert my USB in my computer, I get a note saying: "the disk in drive E is not formatted. Format it now? "When I click on Yes - It then proceds to tell me to drive cannot be formatted. Now when I try to find my memory card - its completely gone! Help!

  chanondesirae

  Repeat the process of formatting your phone memory overwrite... Make sure that it is not connected to the USB cable

  See Crush online manual p. 48:...  Crush

  Tap Settings on the main screen you...

  Setting > memory > memory card > format card

  • Don't forget... so that the phone crush is connected to your computer via. USB, most of the functions of the phone do not work.
  • Phone crush also card does not appear in 'Settings' until the USB of the PC cable is disconnected

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Have you set the USB Mode mass storage on your Crush in definition... see pages 45 & 46 also in the manual to learn How to connect to the computer

  Post edited by: Poko... to include mass storage Mode information

• How to connect to the server ESXI vSphere Client side WAN?

  How to connect to the server ESXI vSphere Client side WAN?

  through firewall

  I tried to open the ports 902 903, 443... and so on...

  and I tried several sites to find the solution but...

  nothing works...

  connectivity works on local network

  Help, please...

  Source Destination Port

  ESXI 443/TCP client

  ESXi 902/TCP client

  ESXi 902/TCP Client

  ESXi 902/UDP Client

  ESXi 903/TCP client

  Edit: Also check if the firewall ESXi all IP addresses are allowed to connect:

  Example:

  See attachment...

• Qosmio G30-137: how to change the English language OS?

  Hello!
  I just bought Qosmio G30-137 of the Germany and he has Windows Xp MCE in German language.
  The recovery disk is also in German also. I would like to know if someone can provide me with the recovery in the English language disc or can someone tell me step by step what I need to do to make a format for install Windows Xp MCE version in English and what programms I probably need because I'm a newbie...

  The laptop has also two HARD drives with RAID technology.
  I can't wait to hear promptly.

  Hello

  Windows was delivered in German language, because you bought in Germany. You cannot change the language to English without the recovery or the original version of the Windows operating system English English CD.

  You can install the original Windows operating system but before you install the new OS you need to install the RAID driver.
  Check out this FAQ from Toshiba document:
  http://support.toshiba-tro.de/KB0/TSB56012H0001R01.htm

  See also the similar topics:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8076&MessageID=30452#30452
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=4603&MessageID=15170#15170

• Qosmio G10-122: I can't find the Qosmio player

  I buy the qosmio g10-122, but I can't find the Qosmio player in Notepad.
  I need this software and I will download this Internet but I'm not sure this could work whith my laptop.

  Hi Adriano.

  Have you checked all the stuff that was delivered with your Qosmio? There the Qosmio player installation CD?

  QOSMIO player is already preinstalled on your laptop on a hidden partition. Check the user manual. There is a detailed description how it works exactly.

• Qosmio G10 begins with vertical lines on the screen

  Hello, can anyone help?

  When I try to start my sign qosmio G10 comes on with vertical lines on the screen. And the screen goes black and I can only hear the fan.
  In VGA mode, it begins upward, but always with the lines on the screen.
  Is there something wrong with the video card? In my view, that there are more people with this problem.
  Toshiba offered little help?

  I'm 'out out of warranty '. I need to by a new complete motherboard or y at - it another option? Replace the video card?

  Hello

  Its a shame about the warranty because you ask the service partner Toshiba for the verification of the laptop and this procedure would be free. You know, the warranty would cover the audit of the laptop.

  But I would say the external display connection and then you can check if the same vertical lines appear on the external display.
  If you see the lines on the second monitor, then I guess it could be something wrong with the graphics card or motherboard.

  I think that this procedure is the best way to find out what could be the problem, but anyway, I think you should ask a technician for assistance if you want to solve this problem.

  PS: Have you tried to reinstall or update the graphics driver? I think you should do it but I don't know if it will help you, but you know Mr. try is free ;)

  One of my friends had a similar problem with the vertical lines on other mobile manufacturing, and it was a WLan cable which was responsible for the strange lines on the screen.

• Qosmio X 770-how to connect a video camera with firewire interface

  Hello

  I want to buy the new QOSMIO X 770.
  I have not found information on firewire.

  The documentation talking about video editing.
  How to connect a camera with firewire?

  No connector, no card expresscard...

  Hello

  You can also use an adapter USB to Firewire which allows you to connect device firewire to USB port of the laptop.
  USB 2.0 is 480 Mbps interface and FireWire is 400 Mbps but interface so, theoretically, USB 2.0 should be faster, but that's not true. Firewire is faster according to some tests. However, there aren't big differences, so I think that the use of this card must function.
  There are various one USB to Firewire adapter on the market. Simple Google.

• Satellite A200 - how to connect to the TV?

  Hi you.

  How to connect my laptop to the tv with a S - video Cable Media or VGA - RGB cable? I tried to connect by Fn + F5, but no signal goes out. If I use the VGA - RGB cable + something is comeing out on TV but its streaming.

  Kindly help me...

  Hello

  You can use two cables to connect your laptop to the TV. It s according to the interfaces on the laptop and the TV, but in both cases, it of the same:
  Connect the cable to the laptop and TV, turn on your TV and select the right channel, then turn on your laptop. After the clean boot procedure, you can switch between monitors with FN + F5.

  If you use S-Video cable make sure you are using the coding system good TV, e.g. PAL or NTSC.

  > If I use the VGA - RGB cable something's come out to TV but its streaming.
  What settings did you use (screen resolution, screen refresh rate, etc.).