Qosmio G20 156 - card SD & DVD fail at the same time

Similar Questions

• How to set up and use two video cards at the same time.

  I have HP Pavilion a6150d desktop under Windows XP SP3 PC. My goal is to be able to use the integrated video card and GeForce 220 video card I just buy at the same time.

  The integrated video card and GeForce video card (connected to the PCI-E) are installed and usable, but the problem is that I think that my computer cannot detect a video at a time card, so I can't use 2 monitors at the same time.  The video only card detects my computer is what I chose as a primer in the BIOS. When you go to the Device Manager display adaptors I can only find an available video card and that's regardless of Setup as primary in the BIOS.

  My GeForce 220 have VGA, DVI and HDMI display connectors, but I don't have that VGA cables. So my only option at the moment is to use my video card GeForce with band single VGA connector and integrated everyone to use my two monitors.

  I hope someone can help me without spending more money...

  "You're not going to be able to use the graphics card integrated Intel and PCIe x 16 graphics card at the same time."

  Thanks Frank, this already answered my question, you help me already by saving my time searching for the fix (since there is NO solution), although it won't save my money I like always your quick response and your support. My monitor is HPw1907 with a DVI connector, so I'll just buy a DVI cable. My other monitor LCD SHARP that have a HDMI and VGA connector so I'll just use the VGA cable in this one.

  So I guess that my simple goal is not achievable using HP Pavilion a6150d. I love HP more than Dell, but it's doable in Dell, so I hope that HP will have way on how to make this thing work in the future.

• Qosmio G20 156: clean install?

  Hello

  I am new to the arena for laptop and am the proud owner of the Qosmio G20 156 fantastic.

  I was wondering what people recommend doing the first thing when you receive... in what respect the sofware & operating system; Is it a good idea to perform a clean installation of Windows and the format of the HARD drive? I'm asking this is because some laptops come with a lot of junkware? If so, it's a very simple process using the recovery discs or I just would open the Pandora's box of possible complications?

  I'm quite proficient with installing the drivers etc.

  Any advice much appreciated!

  Hello

  Well, it s beautiful that you're proficient with installing the driver, but is not everything you need to know.
  This device uses a RAID technology and you will need to also install the RAID drivers, etc.
  I don t recommend to format anything or install the new OS. Toshiba programs and applications are installed on the new Qosmio because it s a laptop top of range with many features. The latest features need these applications.

  But of course it s your device and you decided what and how is running on your laptop.
  I have this case you can use the image of Toshiba and you can remove some programs from the laptop computer in Add and remove programs

  It is a simpler way.

• Qosmio G20: Feedback speaker + HD DVD will not play

  I usually don't use the internal sound on the laptop it is normally plugged into my hi-fi using optics and a creative labs USB device.

  However, I am experimenting with playing a DVD hd through my TV using the hdmi output connection. The two DVDs, DVD player high definition HD Toshiba tries to play but nothing happens. Anyway back to the right question.

  I thought that, perhaps, the cause is that I had disabled internal sound, so I let him. However, when you start up Windows, I got your feedback loud and terrible (MOM had to leave the room). I had two times to turn it off by pressing on the top to move off. When feedback was going on the computer seems inadmissible. I discovered later that he would sometimes silence if I almost closed the lid. Finally, finally, I managed to get into the control panel to turn off the sound edge. Any ideas?

  Back to DVD problems. Bought the PC in early January and Doom on HD DVD just to try (has not bought a laptop for high definition DVD just the model I chose had it anyway). When I tried doom, it did not work, a few weeks ago. Permit on board and it worked. Disabled the sound, back to my stereo and it still worked. In both cases, did not watch the movie, was just to try the stuff of high definition.

  A colleague lent me King Kong on HD DVD and I had intend to also try the hdmi connection. The two videos won't play.

  Any ideas?

  Wait a moment David! Your ad is so confusing to me that I n know how to understand all your problems.

  Can we please discuss step by step?

  First I delete information because, as far as I know, the G20 is not distributed with HD - DVD player, only G30 (not all). Because of this I will ask you once again: is this your Qosmio G20 has ODD HD-DVD and HDMI output on the basque coast port? If Yes can please write you exact model description (G20 - XXX)?

  I ask this because I tested the G30 friends with my HD-ready LCD TV and everything works perfectly. Picture on TV is brilliant and its really fantastic.

  Please write again, but clear sentences and try to explain what is exactly your problem.

• Integrated digital televisions Qosmio G20 156

  My husband has a Qosmio G20 156.
  Can someone tell me if there is available on this model digital TV reception. I hope to get a USB DVB - T for father's day, but looking at the specifications, it indicates that it has integrated digital capabilities.
  I am sure however if his machine didn't and then we would have already plugged!
  Can someone clarify for me, as I would like it to be a surprise.

  Hello

  According to the website of specification Qosmio unit was delivered with Tuner TV FREEVIEW + analogue hybrid and DVB - T antenna.
  I don t know where do you live, but the fact is that you cannot receive digital signals everywhere. The signal must be strong enough to receive digital channels.

• Qosmio G20 156 runs slow after system restore

  Please help since my son crashed my pc and I restored it with the cd that came with the machine im problems with the screen saver works slowly and some programs that run slowly as vision of nero which was fine before. I tried all the usual stuff like the lowering of graphics acceleration but no joy please don't help

  Send me an email to [email protected]
  my machine is a qosmio g20 - 156 pqg21e

  Hello

  It is hard to believe that the Qosmio G20 may have some problems with the saving screen graphics and slower running.

  In any case try check the energy saving settings and the use of the processor to maximum power. Check also running a process in the Task Manager and stop all unnecessary processes running. Don't forget that antivir application doesn t do any disk HARD analysis in the background.

• Qosmio G20-127: failure to screen after closing the lid on Vista

  Hello

  I have a Qosmio G20-127 and I recently installed Vista Ultimate (32 bit). I managed to put everything in its place (except the magic buttons, but the drivers are not on yet), but I have a problem that makes me seriously reconsider coming back to XP MCE.

  When I close the lid of my computer, the screen turns off of course, but when I open again, it does not turn, but it stays black. And I can't turn it on again no matter what. I have to turn off the entire computer and it is quite unrealistic.

  Funny is that after a restart for about 20-30 minutes, I can open and close the lid normally, but the same problem occurs after a bit more time to work on the computer.
  The problem persists even though I disabled everything remotely connected to the closing of the cover.

  Does anyone have a solution?

  Hello English

  Try you update the BIOS on the VISTA OS?

  I can imagine you will always find something new and unusual, but please note that Vista is not supported by the OS for Qosmio G20 (Vista drivers are not available on the Toshiba download page) and you can expect that from time to time, you will discover new disturbing behavior.

  I recommend you to install and configure Vista as described in the topic of s Francisco, configure OS for your needs, and be happy if you use Vista without any serious problems. In my opinion, for OS installation and configuration software Qosmio is Toshiba laptop more complicated template, and you will never be able to configure it as a supported and preinstalled WXP MCE. Commands supported are tested and bugs are fixed, but not with Vista on Qosmio G20.

  Sorry my friend. Sounds stupid, but maybe that's just the truth. By the way: I like Qosmio G20. Maybe I'll buy one if the price is Ok.

  Good bye

• I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  Date and me are dealt with by the network. Try restarting your router/modem...

  Verify that DNS is set to auto

  Make sure port 123 is open on the router (refer to the manual of the router to you)

• Using Nvidia Geforce and Intel hd graphics card both at the same time for games

  Helloo,

  I am new to the community. I bought Lenovo y50 last month. It comes with the dedicated graphics card Nvidia Geforce gtx 860M and Intel HD 4600 Graphics intigrated. Its a portable game even if I am faced with leggings in some high permorfance games.

  Can I use the graphics card Nvidia GeForce and Indigrated Intel HD graphycs... the two all in games...?

  Thank you... Help will be appreciated...

  One thing you can do to ensure the highest perfomance on games is to go to the Nvidia Control Panel programs, manage 3D settings, then find the game you want and set to use only High Performance NVIDIA graphics (or discrete).

  You can not use both cards at the same time by writing this (DirectX 11), but with the arrival of Windows 10 and DirectX 12 July 29, you will be able to use both at the same time to increase performance. So far, however, it is simply not possible to use both at the same time. The best option is to use only the GTX 860 M.

• Can I acquire at the same time HAVE two cards of different acquisition installed on the same computer

  Here's my question:

  I have two different cards installed in a PC. Specifically, PCI-6224 and PCI-6254. I need to acquire 50 analog inputs (real time). Can I use two cards to do? I mean I can synchronize these two cards and acquire simultaneously several channels at the same time?

  Thank you

  Alessandro

  Yes. You can use a RTSI cable between them. See the examples of the expedition. If you are using LabVIEW, look at several Synch - Analog Input - Cont Acquisition devices.

• Measure the voltage and the temperature at the same time with a single card PCI 6014 DAQ?

  Hello guys,.

  I'm doing a charger measuring the voltage of the battery, the charge current and the temperature of the battery using a 6014 cardboard...

  I want to use my PCI6014 DAQ card to measure 2-channel analog voltage input and 1 temperature Channel Analog input using thermocouple type k measurement of voltage or temperature isolation is OK, but I can't understand how to measure the voltage and the temperature at the same time... I want to use input differential...

  Thank you in advance, all the tips

  YSL

  Create a task and add channels to the task, as follows:

  

  Christian

• Play two sound waves through two different sound cards at the same time?

  Hi all.

  With the help of old ship poles and the example of screw provided with Labview 2009 SP1, I could get a part of the path.

  The goal is to simultaneously play two .wav files, to two different sound cards. So far:

  (1) I can play a wav file for each sound card

  (2) I can generate two sinusoidal waves of different tones and put each two cards separately at the same time.

  But when I replace these two tones of #2 with .wav files, wave files play in turn. If wav_1 plays sound_card_1, THEN wav_2 plays sound_card_2, not simultaneously.

  It is even possible to play 2 wav files simultaneously on different maps?

  I've included a VI of the attempt to #2 above. WARNING: my labview skills are minimal and this vi was very experimental is probably terrible form.

  Why do you want to do this. Many modern sound cards have 5 channals output

• use of dll in the mixed in win 2008 application fails, but the same sequences of app in win 2008 r2

  Hello

  Currently we have an application that follows set up, we have a module a [mixed-mode dll] compiled with / CLR Pavilion and we have another module B [native code [exe] which gives access to the module. Application B fails to run on the computer of 2008 victory while the same application runs with errors on a box of win 2008 r2. Its a 32 bit application. The only change that has happened in our env was until recently, we used VS 2008 compilers and so far, the applications ran fine on win 2008 and win 2008 r2 machines. But the application even when it is compiled with VS2010 causes the error to be seen only in a box 2008 victory.

  While trying to identify the issue, I tried to create the sample application that has a dll in mixed mode generated with the/clr option, and the content of the dll is just a global function that is exported by using _declspec (dllexport).

  The other application I wrote uses the .lib, .h and the dll of the module above to call the global function written. When I run the exe of the application fails with the same error. Just to be clear, that the projects are developed using VS2010.

  When I just removed the option/CLR using which is the compiled module the application works fine. Ask you to compile with / CLR, generate a dll in mixed mode is causing problems or if I'm missing some parameters.

  The application even when I came to win 2008 r2 env works fine, I even tried to copy projects to win 2008r2 box and tried to run it and it works fine.

  Please let me know if I could help in this regard or what cud be wrong in the env or if its sth a known issue. Also was wondering if his being caused somewhere in the Ombudsman (thunking).

  Point to note is that control never comes the code I've written, it fails while the modules are loaded even if my observations are correct.

  Here is a log of event viewer when the main application crashed...

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: pscrrun.exe
  Application version: 8.53.0.0
  Application timestamp: 4fcd78fa
  Fault Module name: ntdll.dll
  Fault Module Version: 6.0.6002.18541
  Timestamp of Module error: 4ec3e39f
  Exception code: c0000005
  Exception offset: 00030226
  OS version: 6.0.6002.2.2.0.274.38
  Locale ID: 1033
  Additional information 1: e51a
  More information 2: 4c0d4d78887f76d971d5d00f1f20a433
  3 more information: e51a
  Additional information 4: 4c0d4d78887f76d971d5d00f1f20a433

  psccrun.exe - Application error
  The failed to initialize properly (0xc0000005).

  Thank you

  Kazadi.

  PS: this was already posted in dev/debugger vs MS forum and suggested to post here. [http://social.msdn.microsoft.com/Forums/en-US/vsdebug/thread/70da2119-7d82-4742-9441-c922e0660262]

  Hello

  Your question of Windows 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en/winservergen/threads

• I can't get two cards USB worked at the same time

  I use Labivew 8.6 to program an application using NI UBB-9211 and USB-6211 connection to two USB ports on my PC in order to measure the temperature and pressure (voltage) at the same time. Also, I need to generate two AOs of USB-6211 to drive my engines. I tested two cards, they are OK. But when I program them together, I get only 9211 worked, an error poped to acquisition of data USB-6211. Could you please help me on this? advice or examples of VI / would be greatly appreciated. Thank you in advance!

  Hi navistar.

  It seems that you should be able to do what you are trying to accomplish. Can you post some information about the error you receive? You use the lower level Assistant DAQ or DAQmx screws in your application? You can post a screenshot of your code where it is merged together and easier troubleshooting. You use any trigger of your application? We have examples in the example Finder (help > find examples) under Hardware Input and Output > DAQmx. These examples are a good place to start to build your application. If you already have the code work for each instrument and you have problems combining them, it might be easier to work with where you are at as opposed to leaving it everywhere.

• How to use the modem (2 Mbps) wired ADSL & 3G data card services to large internet wireless broadband (7 Mbps) in Windows XP at the same time?

  Hello
  I have a (2 Mbps) wired DSL modem and internet connections broadband wireless (7 Mbps) of 3G data card.
  When I use these internet services individually, they work very well.
  I like to use these services wireline & wireless internet connections at the same time, so that I get the total speed of 9 Mbps.
  When I connect and try to use these internet services at the same time, I can't go through it.
  Please inform how to configure Windows XP to do this?
  Thank you
  -to swim.

  Hi dswam,

  Please provide your comments on the design of the Windows network. If you want to see several internet connection option in the future versions of Windows, you can submit your comments here.