Qosmio G20: I couldn't play one of my favorite delays games

Similar Questions

• I can't play one of my direct cause games x 11 issue

  None of my games or any other program that requires a direct 9 x and will does not work after you install an update to x 11 live on my PC. I tried to change my graphics settings on Intel Control Center and it does not work either. How to solve this?

  So it turns out that it was a problem with a graphic driver Intel lacking which prevented me from playing my games. Now "Standard VGA Graphics Adapter" is replaced by 'Intel(r) HD Graphics' after that I updated the driver from Intel.com. Now everything works perfectly! Thank you advice!

• Qosmio G20 HD is ready?

  I have a Qosmio G20 (PQG 20).
  No one knows if, with the help of a "tuner Avermedia AverTV DVB - T Volar USB" (HD ready),
  I can watch true HD transmissions of BBC / LAND?
  Thank you.

  Hello

  I checked the page on? AVerMedia AverTV DVB - T Volar USB tuner? in my country, but I didn? t find any info on the HD. I have gift? t know if in your region, you are able to watch HDTV, but try to talk to your local dealer. They should be able to give you info on the TV tuner.

  Qosmio G20 has high complete ready for HD and if the tuner is HD-ready, you can enjoy better picture quality on your laptop. I also Qosmio G20 but in my region there is no DVB - T, not yet, but I'm also very interested to have a HD TV.

  Good bye

• Qosmio G20: Feedback speaker + HD DVD will not play

  I usually don't use the internal sound on the laptop it is normally plugged into my hi-fi using optics and a creative labs USB device.

  However, I am experimenting with playing a DVD hd through my TV using the hdmi output connection. The two DVDs, DVD player high definition HD Toshiba tries to play but nothing happens. Anyway back to the right question.

  I thought that, perhaps, the cause is that I had disabled internal sound, so I let him. However, when you start up Windows, I got your feedback loud and terrible (MOM had to leave the room). I had two times to turn it off by pressing on the top to move off. When feedback was going on the computer seems inadmissible. I discovered later that he would sometimes silence if I almost closed the lid. Finally, finally, I managed to get into the control panel to turn off the sound edge. Any ideas?

  Back to DVD problems. Bought the PC in early January and Doom on HD DVD just to try (has not bought a laptop for high definition DVD just the model I chose had it anyway). When I tried doom, it did not work, a few weeks ago. Permit on board and it worked. Disabled the sound, back to my stereo and it still worked. In both cases, did not watch the movie, was just to try the stuff of high definition.

  A colleague lent me King Kong on HD DVD and I had intend to also try the hdmi connection. The two videos won't play.

  Any ideas?

  Wait a moment David! Your ad is so confusing to me that I n know how to understand all your problems.

  Can we please discuss step by step?

  First I delete information because, as far as I know, the G20 is not distributed with HD - DVD player, only G30 (not all). Because of this I will ask you once again: is this your Qosmio G20 has ODD HD-DVD and HDMI output on the basque coast port? If Yes can please write you exact model description (G20 - XXX)?

  I ask this because I tested the G30 friends with my HD-ready LCD TV and everything works perfectly. Picture on TV is brilliant and its really fantastic.

  Please write again, but clear sentences and try to explain what is exactly your problem.

• Qosmio G20: How do you get TV to work?

  Hi, I recently bought a laptop Toshiba Qosmio G20.

  I want to watch a Divx on my TV using the laptop as the player. But, I can't get anything to display on my TV, my TV remains empty.

  I tried pressing on now the keys Fn and F5 and this doen't seem to do anything. I opened the Nvidia graphics window and expand on my secondary display and I also tried to have a vision of "clone" of the laptop computer on my TV screen by clicking on the Advanced button. Nothing seems to work.

  Could someone help me please? I think that I am using a DVI cable (this is the cable where you can hang on the back of the laptop). In addition, if no one can give me more information so can someone give me the phone number of the technical support for Britain?

  Any help will be much appreciated.

  Concerning
  Dr. Corinne

  Hello

  Qosmio G20 supports the S-video port or video-D. You can connect to the TV with these ports.
  To view the video on the TV, be sure to set up the other parameters that you can see that nothing is displayed.
  Don't forget to use the FN + F5 shortcut to select the display device before you start playing the video. Don t change the display device all in video game.
  If the TV is connected to the computer, set the TV type in display properties.
  Click the setting tab, and then click the Advanced button. Click the Geforce tab, click current view and select TV. Click device settings and select TV format that your TV supports.
  When the TV is connected using D-video cable and the 1123i or 750 p is selected then kept copy of DVD video cannot be played correctly.

  Please see the user manual. You will find details

• Qosmio G20: How to get rid of the large green volume screen?

  Hello

  I have a Qosmio G20 I bought at the Japan last year and have since changed drivers and English operating system. However one thing ive noticed, distinguished by the Japanese put in place, it is that whenever I adjust the Volume level by using the wheel on the right side of the laptop, a large green level Volume display appears on the screen. I want to get rid of this cos it takes place close to half of the screen. The Japanese version had this problem.

  I checked all the settings in the Panel and the various sections of both properties but couldn't find anything.

  Suggestions how to remove it? Qosmio users have this on their screen?

  Thank you.

  Hello

  Berga is right. This volume indication disappears shortly after.

• Qosmio G20: Question of Media Center Receiver - recovery question

  As the abvoe really, I usually leave my computer running from one day to the next day and yesterday I went on it to find that I had 80 MB hard drive (60 GB HDD) to the left. Error messages had popped up and a record of these was recorded in the folder pchealth, under userdumps, or something like that. Anyway I deleted 58gigs with a value of these userdumps, but the same error message kept popping up.

  It was a mistake with the Media Centre receiver, but I don't quite know what it is, but it was founded in the ehome folder which I think is located in the main folder of Windows.

  I have been into msconfig and stopped the ehhome.exe to start but that seems to ruin the tv/video within the media library settings.

  I recently installed the codec and divx player to play divx movies.

  I was wondering is that it would be more prudent to use the CD recovery and re - install windows and the software and create a restore point, and then install the codecs to see if the same problem arises, or if someone has had this problem and it heals.

  Finally, I actually ran the recovery cd to the above, but when the cd starts the first line on back said something like, 'running Setup for windows 98'. XP is certainly on the 98 and no recovery cd?

  Can someone please confirm this for me and all the answers to the above problems.

  Thank you.

  Hello

  I can t believe that Windows 98 is placed on the recovery CD.
  AFAIK the Qosmio G20 was delivered with the MCE window.
  There is no recovery of Win98 CDs for Qosmio units.

  In my opinion, this message occurs due to RAID or other drivers that load at the beginning.

• Qosmio G20: DVD region Code?

  Hello

  I am about to purchase a Qosmio G20 wasn't what I just learned today that they won't be available mid-2005 in Belgium.

  However, in preparation since then, I have a few questions:

  Because the Qosmio is a DVD playback mode without having to start Windows, this means that the region will be probably set somewhere in the Bios for a given region.

  Travel laptop users and my partner is American, so we have DVD region 1 and 2.

  Are there any evolution of the WinDVD software when running on Qosmio the failing lock a region code after X play. I've never understood that laptops (mobile systems) have the same restrictions as the reception of readers of DVD/entertainment (whow by the way no one knows!)

  So, how can we play the two regions on the Qosmio G20 or anything that will be available for the Belgium.

  Thank you
  Danny

  Post edited by: Danny

  The bounding can be changed 5 times.

  After the last selected region Code is saved in the DVD player.

  But also, there are a lot of programs (Freeware) that help make your life easier and work around this Limitation.

  The only thing that you can do this through precaution is to google all over the place.

  Good bye

• Qosmio G20-108 Windows recovery problem.

  Hello

  I just purchased a Qosmio G20-108 of ebay and the seller said that the laptop is ok but I had a virus previously and it wiped the HARD drive. The DVD player has so replaced it by a new one, but he couldn't just load the recovery of Windows Media Center. I bought the laptop thinking that I can fix it but I could not and now I felt stupid: (.)

  When I turn it on, you receive this error message:

  ERROR ATA #1

  Intel (r) Boot Agen FE v4.1.16
  Copyright (C) 1997-2004, Intel Corporation

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.

  Someone has an idea on how to solve this problem before sending it to the "Topaz" Support and cost me a fortune?

  Thank you.

  If the DVD player is replaced, you are 100% sure it works well then you probably have a problem with faulty HARD drive.

  If possible, try to get one for testing purposes. It can be used. Replace the HARD drive and try to install the top OS. Check if you have full access to the HARD drive.

• How can I install Windows XP on Qosmio G20 Media Center?

  Good day to all,
  Can any one help if there is a way to install the windows xp Media Center in my toshiba qosmio G20 - 102.
  I tried, but there are still some drivers I couldn't find them.

  Hi silverbeso,
  You should find the drivers you need on this websites homepage. Go to the 'support and downloads' button, then click 'download files '. All the drivers you need should be there.

• Qosmio G20: Logitech quickcam driver double all the media speed

  When I installed the driver Quickcam Fusion on my Qosmio G20, the strangest thing happening...
  All the sounds/videos on the computer (music, microphone, video, etc.) seems to have doubled in speed, playing how in the world is this possible?

  The Quickcam Fusion driver is not compatible with the G20? Something must have gone completely wrong.

  All this is fixed when I remove the driver for the cam again...
  I really need help with this one!

  It seems that the driver quickcam cased this very strange behavior
  Why you n t contact the cam manufacturing and support.
  Maybe guys know more about this problem and offers updates of pilot or quickfixes.

• Qosmio G20 - CD/DVD drive does not burn

  Please can someone help?
  I rebuilt my qosmio g20 and the thing what it is great except my cd dvd player that plays audio and video but simply will not register.

  When the folder now, he says no. RECORDER and when I click on check for other readers of anything.
  Select record is selected. Before the reconstruction, it all worked but did not.

  I have nero has always worked well even with the sound stuff installed. So I reinstalled nero and nothing.
  I tried to delete the upper and lower entrances in regedit, which is a common difficulty that offered among various forums but nothing again.

  Sick as a parrot, so glad of any help here... Thank you

  Hello

  It's very strange
  Have you tried to reinstall the OS again?
  Try this.

  I recommend also to remove the CD/DVD drive Device Manager, then restart the laptop.
  Usually the operating system should recognize the drive of the CD/DVD device correctly and must reload the driver again.

  I see you are using Nero burning ROM. I know sometimes the BONE can be confusing upward if several burning applications are installed.
  So remove the sonic software and use only one. Nero.

  Best regards

• Qosmio G20 blocked on JBOD in BIOS

  Hello

  I have a problem with the Toshiba Qosmio G20-109.
  The system does not start, the two hard drives JBOD (unable to start Windows).
  HDD1 - 120 GB
  HDD2 - 250 GB

  So I wanted to put the first disc HARD 1 1RAID-0 using the method described in the Manual: I entered the code 1 2 3 4 and I pressed Enter.

  The problem is that once entered the BIOS code remained frozen and blocked.

  I tried everything, I'm not despairing managing to install an operating system.

  I hope there is a solution.

  Hello

  If JBOD has been set in the BIOS, Windows OS could not be installed on this HARD drive except using the Toshiba product recovery disc. But I guess you want to install the system using another drive in Windows.

  To be honest, I not very well why the BIOS freezes and does not accept Mr. code it s certainly the right one: ENTRY 1,2,3,4

  But the issue is probably related to the HARD drive. How to switch hard drives in the Bay?
  Try to use the 120 GB HDD2 and the 250GB as HDD1.

  I also recommend you use the 1RAID-0 = HDD1 and HDD2 = JBOD
  Would be interesting how it works.

• How to install Win XP on Qosmio G20 using USB flash memory key

  Dear Admin,

  This is regarding my laptop Qosmio G20.

  Last month my OS (windows XP media edition) has been corrupted so I attempt to reformat and reinstall the operating system.

  But unfortunately my CD/DVD-Rom does not work/play,.

  Then I try to install it via a PEN drive bootable with integrated... XP but when I go into the BIOS I n I find USB Boot option... :-(

  Then I remove my main hard drive and put it in another laptop and install the XP, its work in this laptop, but unfortunately when I put the new HARD drive the Qosmio his departure gives the XP logo but in 5-10 sec its judgment and give a blue screen message then then restart automatically...

  plezz help me install XP or Vista or 7 those who works there...

  plezzz plezzz sound my laptop preferred

  Thanks in advance

  JAI

  > Then I try to install via a PEN drive bootable with integrated... XP but when I go into the BIOS I n I find USB Boot option... :-(

  Connect the USB flash memory key to the laptop, now switch on and press F12.
  The start menu should appear where you could see all the possible boot devices.

  Do you see the USB boot option in the start menu?
  If this isn't the case, then you will not be able to boot from USB flash memory.

  > Then I remove my main hard drive and put it in another laptop and install the XP, its work in this laptop, but unfortunately when I put the new HARD drive the Qosmio his departure gives the XP logo but in 5-10 sec its judgment and give a blue screen message then then restart automatically...

  I guess that this is because the RAID drivers was not included!
  Qosmio G20 supports the RAID controller and you add the RAID driver (located on the Toshiba UE driver page) in order to recognize the HARD drive.
  But I put t know if you could do so using another computer I guess that's not possible.

  Maybe you can try to disable RAID in BIOS

• Re: Qosmio G20: DVD-RAM UJ-845 s does not read CDs or DVDs

  I'm a big supporter of Toshiba product.

  Please help me

  Given that I had to do to update form my * Toshiba Qosmio G20-123 *.
  My * DVD UJ-845 s * do not read any CD or DVD.
  Before that, he worked a lot of good. But unfortunately now, he does ' t read anything.

  The system to recognize it. The driver is installed and working properly.

  After I installed supports DVDRAM of Toshiba.
  The same thing occurs when playing a CD, the system tells me:

  * E: / not accessible *.
  * incorrectness function *.

  I try with a program on the net but no way.

  I was well able to put the original firmware, but I could not find.
  If someone can do a dump of the original Firmware for me it will be a miracle for me.

  Help, please.
  My great respect.

  I think I can help you:

  Go to my computer right click on the CD/DVD drive.
  Now go to properties; Click the Recording tab and check "Enable CD writing on this drive".
  Now click on apply and restart the laptop.

  Check of workaround and post comments