Qosmio G20: MCE TV Guide and change channels

Similar Questions

• Qosmio G20: MCE RPG and can't find any digital TV channels

  MCE RPG services digital antenna and find any of them after I installed Media Player Classic on my Qosmio G20. before the installation of the said I could watch digital tv. the place where I live has begun broadcasting dvb - t for local four-channel a few months a go. y at - there anyone out there that can help me find the problem and its solution?

  Thank you

  Hello

  Are you sure that your G20 was delivered with a DVB - T tuner and analogue TV tuner not only 100%?
  As far as I know the g-20 was delivered with a different hardware configuration

  But if you camera supports DVB - T tuner, so I think that digital signal is not strong enough to receive the digital channels.

  If you wish, you can consult this useful document on HDTV on MCE:
  http://www.Microsoft.com/windowsxp/using/MCE/expert/HDTV.mspx

• Qosmio G20 = video cable component and videos in high definition with Pinnacle

  Dear everybody
  I bought my Qosmio G20-120 of the Poland that came with D video cable SCART. This cable is only capable of transferring video signals (CVBS) which is pretty useless, because Qoismio already has a S-video out... What is the best simple video production I can get to SCART.
  According to www.toshiba-europe.com Qoismio is supposed to have video output component. But it comes with cable SCART instead. I always try to make this component video cable D-video of the Distributor. If I don't succeed, does anyone know if and where I can buy this cable in Europe? Or is it possible to make a video component with the D-video out D-video cable with cable SCART?
  Everyone last tried the channels high definition DVB-S on Qoismio using USB 2.0 DVB - S TV Card.Any opinions on Pinnacle PCTV 400e?
  Thank you

  Hello

  Sorry, but I don t agree with you. SCART in my opinion is always better than S-Video. As far as I know cable SCART can transfer image and sound and picture just S-Video. Am I wrong?

  In my view, it's great that laptop Qosmio has two video ports and each use can make a choice.

  Another way your ad is a bit confusing to me. Qosmio G20 includes a section on the port (D-video) and as far as I know the original cable must be provided. You can see on this page http://support.toshiba-tro.de/KB0/TSB4A00TK000MR01.htm

  Using this cable you can easily connect your laptop to the TV.

  Also check this http://support.toshiba-tro.de/kb0/FAQ5300XK0012R01.htm document
  It can also be interesting and useful to you.

  Good luck!

• Qosmio G20-126: remote control and keyboard shortcuts media do not work

  Hello all,.

  I think have deleted by mistake all my HKLM startup. I managed to restore the necessary executables to start manually but it seems to me miss a very important piece of the puzzle. More precisely the file executable (or Department) responsible for the Qosmio multimedia shortcut keys and remote.

  If anyone knows which executable (or service) is responsible for the press shortcuts keyboard/remote control I would appreciate their help to remedy this situation. Also if anyone has the startup configuration by default (see msconfig) to a Toshiba Qosmio G20-126 that would be also a great help for me. Just in case I missed something else.

  Laters,
  Lee.

  Hello

  One question; Why you n t use the tool system restore to restore the OS to the point where you have changed the registry entries?

  It is a simpler method to restore the settings!

  If could also try to reinstall first the common Modules, then the controls.
  This application which you can download from the Toshiba driver page!

• Toshiba 26AV605PG disable and change channels automatically

  Hello

  I would ask you for help on my TV.
  The problem is that the TV turn off itself.

  The time where it will shut down its random, I mean some time it will turn off in 4-5 seconds after you press the turn on button and sometimes do in a few minutes after that (even hours). It's really random.

  What did I try?

  -Restore factory settings
  -Unplug all cables (for a few hours)

  He got the second problem too, it is not so big, but it's always a problem.
  The problem is that sometimes the TV to change channels automatically.

  I found a solution for this one.
  I activated the option "Control Panel lock" in the menu and the problem disappeared.

  I noticed this problem, because I'm pretty sure that the problem the two are related.

  Thank you in advance,
  Marine Marinov

  > The time when it turned off its random, I mean some time it will turn off in 4-5 seconds after you press the turn on button and sometimes do in a few minutes after that (even hours). It's really random.

  Hmm, that doesn't sound as parameters or associated software behavior TV.
  Of my knowledge it of possible to set the time (timer) to close the TV turns off automatically (for sure the power) but I don t think that your problem may be linked to this setting.

  However, here is a link to the manual AV605 where you can check the option (page 29)
  http://www.Toshiba-OM.NET/LCD/PDF/English/AV605-1922263237-English.PDF

  So probably this hardware problem s a TV :(

• Qosmio G20-141: no sound with all channels in MCE

  I cannot hear sound in MCE when watching TV for all channels. I use a coaxial cable (the signal comes from a tv cable) connected directly to the laptop.
  I do not know what parameters are necessary for the TV tuner and how to change these settings, because requires only the country and the modality of the received signal (cable, antenna or satellite).

  Please help me solve this problem!

  Hello

  Please see this topic.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14657

  It of on the same topic.
  In my opinion, you have selected is not properly PAL settings. Also check the settings in the BIOS

• Qosmio G20-111: after disk HARD changing the Media center does not work

  Hi, I have a WME Quosmio G20-111, after a hard drive, toshiba support center evolution (disc hard bone) in Italy has reinstalled the WME but whenever I try to use the Media Center pc crash and show me a white screen. After several phone call they told me that the problem is that they don't update quosmio drive drivers?
  I'm desperate, any suggestions?

  [email protected]

  Hello

  Well, as far as I know that the Qosmio Player has been installed on the partition hidden on the new laptop, but perhaps the ASP is not install this application after replacing HARD drive.

  But I do not understand why the missing Qosmio Player should have a bad influence on the media library? MC is a Microsoft program that is part of the Windows XP MCE. Player of Qosmio is an invention of Toshiba and should have nothing to do with the MCE.

  However, you can try to install the Qosmio Player and then try to recover the entire operating system with the recovery CD Toshiba original delivered.

  Maybe it helps.

• Qosmio G20-108 Windows recovery problem.

  Hello

  I just purchased a Qosmio G20-108 of ebay and the seller said that the laptop is ok but I had a virus previously and it wiped the HARD drive. The DVD player has so replaced it by a new one, but he couldn't just load the recovery of Windows Media Center. I bought the laptop thinking that I can fix it but I could not and now I felt stupid: (.)

  When I turn it on, you receive this error message:

  ERROR ATA #1

  Intel (r) Boot Agen FE v4.1.16
  Copyright (C) 1997-2004, Intel Corporation

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.

  Someone has an idea on how to solve this problem before sending it to the "Topaz" Support and cost me a fortune?

  Thank you.

  If the DVD player is replaced, you are 100% sure it works well then you probably have a problem with faulty HARD drive.

  If possible, try to get one for testing purposes. It can be used. Replace the HARD drive and try to install the top OS. Check if you have full access to the HARD drive.

• Qosmio G20 - recovery system without CD player?

  Hello everyone.

  I have a Qosmio G20 and the internal DVD player does not work.
  I have the DVD of recovery also, since the DVD player does not work I am not able to start with DVD recovery with the recovery.
  I also have external DVD drive but Qosmio does not support external USB disk to start.

  Is it possible my system recovery without having to replace my internal DVD player.

  Concerning
  Knockaert

  Maybe if you start your laptop in the BACK and load the driver BACK for external device. With full access to an external device, maybe you'll be able to start the recovery procedure.

  To be honest I don't understand why you don't want to replace the optical disk drive. Qosmio G20 is so old and parts are more expensive. Check eBay and you will find many drivers for Toshiba laptops.
  Replace the drive and be happy. It is not so great investment.

• Re: Lost the disc to install for Qosmio G20

  My Qosmio G20 has stoped working and I need to format the hard drive, but have lost the instalation disk so I'm towards the top of the Creek, unless I can get a replacement :(

  Hello

  The restore CD may be ordered from this page or the ASP from Toshiba:
  https://backupmedia.Toshiba.EU/landing.aspx

  If you want you can also install the OS from the original Windows CD and then you can download Toshiba drivers from Toshiba's European driver page.

  Welcome them

• Qosmio G20 no longer works after trying to load the SATA driver

  My qosmio g20 was working until I loaded a driver sata intel (f6flpy).
  Now the lights are working but no attempt to access cd or hard disk etc.
  Is there a way I can reverse the procedure or reinstall drivers chipset etc I guess I corrupted?

  Hello

  I think that you have installed a wrong driver!

  The fact is that the Qosmio G20 supports RAID functionality and you must include the RAID driver and not the driver SATA!

  The RAID driver can be found on the European driver Toshiba page!
  Please choose your model of laptop (right series), download the RAID driver, install it instead of driver SATA and follow along with the Windows operating system installation.

  I think this should solve this problem.

  I'd appreciate some feedback from you!

• Question of Qosmio G20

  This is the worst phone I've ever had buying it was a mistake and I will never buy a Toshiba a new.

  Hmm I put t agree with you friend
  I got the Qosmio G20 in the past and I was really happy with this laptop.
  It was my first powerful multimedia notebook and I was satisfied.
  I had some other laptop manufacturers happened, but no one was so powerful as a Qosmio...

  Now, after two years of use I sold that baby because I bought the G50.
  It supports more than features such as the G20 and supports the Toshiba Quad Core HD CPU, which was the main reason for the passage of the G20 to the G50.

  I work with many multimedia applications and it is a dream.

• Capable Linux versions on Qosmio G20

  Hei everyone :)

  can someone tell me what ditribusions of linux a Qosmio G20 can handle? is it possible to anny ways to disable the RAID tool or can someone help me find a driver for linux which can help me whit RAID problem?

  Thanks :)

  Hello

  Before you wait here use search option, put Qosmio G20 as search terms and check the Linux category. You will find several interesting topics on Linux on Qosmio G20.

  Good bye

• Qosmio G20: No HARD drive recognized when installing XP

  I have a problem with my Qosmio G20.
  One of my hard drives was damaged so I bought a new try to reload Windows XP Pro but it came out with an error massege that says: "the installer has NOT FIND ALL disk HARD DRIVES INSTALLED in YOUR COMPUTER.
  But when I check on the Bios it supported hard drives

  I would appreciate any help from you guys

  Hello

  Maybe your Win XP OS does not include the RAID driver!

  Qosmio G20 supports RAID functionality and you must include the RAID driver during the installation of WIN XP by pressing the F6 key.
  The RAID driver can be found on the European driver Toshiba page.

  If you need information more than just posting it here ;)

  Good bye

• Qosmio G20: CPU too high with video usage

  Hello

  I've got G20 (2.13 Ghz processor) and nVidia 128 MB GeForce Go 6600 and I noticed that when you run video that my CPU utilization goes up high enough. View tv goes up to about 80%, video in media player substantially the same, but the video clips on Web sites and sites with video banner Web can get up to 100%.

  I don't know if this normal that I had not really noticed before, but lately, with this hot weather, I found that on the days hottest occasionally my system stopped, probably because the fan may not follow.

  My question is if these ages CPU usage % are normal for this system, or I have some setting wrong that puts the load on the processor and not the graphics card. Can someone tell me if I can check how the video processing is done by the graphics card or how I can assure that this is the work and only in passing on overloading the CPU.

  Thank you very much.

  PS I am running the latest drivers video for this machine, obtained from the Toshiba draft.exe page.

  Hi William

  I had a lot of experiences with Qosmio G20 and activity of the CPU under pressure. With the use of the highest processor unit was never overheated just a little harder because of cooling fan.

  As you know Qosmio G20 is powerful multimedia and video unit problem described in your message is really strange. If you wrote that you don't l l notice that before, I assume your personal configuration is responsible for this. On this path, it is not easy to say why this is happening. Try to check the processes running and at the end all of them you don't need. On this way the CPU use should be much lower.