Qosmio G20 - wireless using Thomson 580 router

Similar Questions

• Qosmio G20-139: use the laptop screen to play on the Xbox 360

  Hi I have a question about the monitor function with the G20-139,

  I have an xbox 360 and would like to know if there is a way to use laptops screen to play on the 360 in high definition or composite mode using the monitor function. With the laptop came a composite cable at one end and a sort of headphone 3.5 mm at the other.

  I read the manual about the case and it does not work.

  Any help would be appreciated thanks

  Hello

  The port monitor - where you can connect with the composite cable can be used to display video from your digital camcorder, video game or VCR on the internal LCD screen. It can be used as a line-in port to allow the connection of a stereo device for audio input.

  In my opinion, you also need this cable to connect the Xbox to the Qosmio with composite cable plug-in software component.
  http://www.madcatz.com/default.asp?page=257&CategoryImg=Xbox_360_Cables

  Then to commence the Qosmio with the Monitor-in button that starts the Qosmio player.

  Good bye

• How to create a wireless using TP-link router & TC

  I have a TP link router wireless (TL-MR3420) & also TC. I use internet through a router. now, I want to use my TC wireless for backup and also a (wired) printer for wireless printing. can you please let me know the configuration setting for above networking.

  The Capsule can only connect to a network using the wireless if you have another router Apple providing the network, so the TC cannot connect to the signal of the TP-Link wireless router wireless.

  The TC must connect to the TP-Link router with wired Ethernet wired, permanent. Connect the cable to one of the LAN ports on the router TP-Link on 'o' WAN port on the TC <-->.

• How to install Win XP on Qosmio G20 using USB flash memory key

  Dear Admin,

  This is regarding my laptop Qosmio G20.

  Last month my OS (windows XP media edition) has been corrupted so I attempt to reformat and reinstall the operating system.

  But unfortunately my CD/DVD-Rom does not work/play,.

  Then I try to install it via a PEN drive bootable with integrated... XP but when I go into the BIOS I n I find USB Boot option... :-(

  Then I remove my main hard drive and put it in another laptop and install the XP, its work in this laptop, but unfortunately when I put the new HARD drive the Qosmio his departure gives the XP logo but in 5-10 sec its judgment and give a blue screen message then then restart automatically...

  plezz help me install XP or Vista or 7 those who works there...

  plezzz plezzz sound my laptop preferred

  Thanks in advance

  JAI

  > Then I try to install via a PEN drive bootable with integrated... XP but when I go into the BIOS I n I find USB Boot option... :-(

  Connect the USB flash memory key to the laptop, now switch on and press F12.
  The start menu should appear where you could see all the possible boot devices.

  Do you see the USB boot option in the start menu?
  If this isn't the case, then you will not be able to boot from USB flash memory.

  > Then I remove my main hard drive and put it in another laptop and install the XP, its work in this laptop, but unfortunately when I put the new HARD drive the Qosmio his departure gives the XP logo but in 5-10 sec its judgment and give a blue screen message then then restart automatically...

  I guess that this is because the RAID drivers was not included!
  Qosmio G20 supports the RAID controller and you add the RAID driver (located on the Toshiba UE driver page) in order to recognize the HARD drive.
  But I put t know if you could do so using another computer I guess that's not possible.

  Maybe you can try to disable RAID in BIOS

• Qosmio G20 - 139 flashing indicator power DC only used

  Qosmio G20 139
  System does not boot, gives a flashing orange DC power indicator only.

  No other indicator.
  Seems to be a code. If I read gives 332
  Battery is fully charged and tried more than one power supply.

  Checked the voltage on the inputs MB seems OK
  Have you tried all the combinations of battery and network combinations but nothing changes.

  Hmm... looks like a hardware problem on the mobo...
  Check the memory sticks.
  Remove one and try to power the unit using a module only.
  You should check both with different combinations means you should check also the two memory slots.

  My computer laptop didn t start because of the defective module.
  However, if this does not help, then you will need contact a local technician because the guy could locate the defective part.
  But I think it could be a motherboard problem, which means that the new Council would be necessary and this can be very expensive.

• Qosmio G20 - how to get rid of his TV tuner when I use the Webcam?

  I was installing just my Logitech Quickcam Fusion on the Qosmio G20.

  I can not get rid of the sound the TV tuner, it is white noise because there is no antenna connected. Playback is selected SigTelAudio and I can't find any way to stop it.

  Martin

  Try this...

  1 - go to control panel, click System.
  2 - Select the Hardware tab, Device Manager.
  3-open "audio, video, and game controllers", Double click on «Toshiba PCI DVB - T...» ".
  4 - Select the Properties tab, open "Audio Devices", Double click on 'Toshiba Audio Capture.
  5. Select "Do not use features on this Audio device ' or 'Do not map through this device', try both.

• Can I use the Qosmio G20 as a mediacentre?

  Hello
  Is it possible to really use the Qosmio as a mediacentre?
  I want to have the Qosmio in one piece and then plug the tom my TV and the audio Center in another room.
  For the photo I think than the DVI on can be used, but for the sound, which can be used?

  Everything must be used by the remote control.

  Allt sounds possible (on papar) but I failed to do as a speider web mediacentre in my house?

  Each of you?

  / Lars

  Hello

  If you want to connect the Qosmio g20 on the HIFI audio system I advise to use audio S/PDIF output line.
  The plug is the same as the headphone jack.
  I think you should be able to use it with the MCE or Qosmio player.
  I think that the remote control only works with MCE but I m not 100% sure.

• Qosmio G20 has white LCD diplsay. OK when it is used with screen external en

  I hope someone can help. Qosmio G20 has full white LCD.
  The backlamps are on and the laptopworks fine when used with screen external fr.
  I guess it's probably the motherboard, any ideas?

  Most people would say that if it worked, say, a couple of days and you can't even start on your LCD screen, then the screen or its cable or mobo circuit feeding the LCD failed.

  I had this on another laptop too, and Toshiba are not something so special that this kind of thing is not generally a valid diagnosis.

• Can I connect VHS Video Recorder for Qosmio G20 using the antenna in the Port?

  Hello.

  I connect my G20 a very old VCR. Can I connect it to the antenna in the port? Someone at - it tried? Because it will not need to buy a cable SCART. And for what I searched by linking to the video in Port, if I want to record the signal, I have WinDVD record I did more.
  So I was wondering if connect the VCR to the antenna port. I'll be able to find and record the VHS signal on media center?
  Thank you

  I already tried on S - video In and I get black screen

  More: When I connect the laptop to a TV it works only via the S-video port. When I use the D-video port it simply doesn't work. The black screen.

  Of course you can do it. On this Qosmio laptop TV tuner works on the same principle as usual TV. You can watch movies on Qosmioplayer or using Media Center Edition VHS. In both cases start movie VHS and let Qosmioplayer or MCE sweep all TV channels. On one of them, you will see the picture of VHS VCR.

  All that s. I tested it with Qosmioplayer and MCE too. It works without any problem. I also tested recording option. This also works. Later, I edited material recorded and created DVDs.

  With short words: with Qosmio G20, you can do whatever you want. It's really good multimedia laptop.

• Qosmio G20-118: upgrade memory to 2 GB using the Kingston

  Can the expert no longer please tell me if this specification upgrade memory fits on the Qosmio G20 - 118?

  Kingston memory for dual channel DDR II of motherboards. This package have 2 x DDR2 1024 MB 533 MHz CL4.

  Thank you

  Don t know your detailed specifications module, but you must use the DDR2 533 MHz PC2-4200 memory.

  The module should looks like this:
  Module memory for Qosmio G20-118

• Qosmio G20 remote can be used to control the volume of a TV series?

  Hello. I read the instructions here http://www.salloway.org.uk/mediacenter/2005/index.html#remote, for programming of a Media Center remote control to adjust the Volume of a television. I can't the procedure to work with Toshiba Media Center Remote black :(

  I have a USB DVB - T Tuner connected to a Qosmio G20 connected to an XBox 360 connected to the LCD TV. The Toshiba remote has no problem of control of the XBox 360 (as Media Center Extender). But I need to juggle the two remotes... the TV for the Volume remote control and remote control Toshiba for everything else.

  Is it possible to program the Toshiba remote?

  Have you tried to connect the remote control or 'learn' to another TV? Maybe you should try it because it may be that the LCD is just incompatible or else.

  Would appreciate feedback. :)

  Welcome them

• Can I use 4 GB of RAM in Qosmio G20-128

  Hello

  can I install 4 GB of ram with 2 + 2 GB DDR2 kingmax, or the limit is 2 GB in total?
  Thank you

  No, you cannot upgrade the memory to 4 GB.
  The Qosmio G20-128 takes max 2 GB (2 x 1 GB) of memory.

  Best regards

• OfficeJet Pro x476dw: wireless without the use of a router direct printing

  Is it possible to print directly to the printer without the use of a router?

  Hi Brad,

  Welcome to the Community Forum of HP.

  OFFICEJET PRO X 476 AND X 576 SERIES MFP User Guide said yes

  See Page 118

  Reference:

  All-in-one HP Officejet Pro X476dw

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Qosmio G20 and Acronis True Image

  Hello

  I have a G20 with the media library and twin 100 GB hard disks that are configured to act as two separate discs (set up of RAID options when I reinstalled the system). I have programs on a disk (C) and the operating system and my data on the other (D).

  On a previous thread I asked to retrieve the C drive only from the recovery disks without wipe data on the D drive, and it seems that this is not possible, to remedy this, I decided to follow the suggested advice and create an image of the C drive for later retrieval if necessary. However, I have had a problem of creating an image or a clone of my system using Acronis True Image disk and wonder if anyone can help. I replaced the D drive with a new disk of 120 GB and uses the old drive in a USB enclosure sata to store the clone or image recovered.

  First of all, all devices, readers ext usb, wireless keyboard, cable network & second screen are connected through a hub to a USB docking station, and when I try to clone with this joint, it fails to restart. Undeterred, I took off the hub and the clone for the external drive seems to work very well. However, when I remove the drive from the existing system and replace it with the clone to test, it does not work. The system appears to start but then get the screen where it says windows windows had a problem and I want to start in safe mode, last known working system, or start as usual in any case. If I select it just reboots and gets back to this screen.

  Also, I tried to create an image rather than a clone and recover the image on the hot spare. Once again, it seems to go ok but when I put the disc and satrt to the top of the same thing happens.

  I don't know if there is anything that you must close before imaging or cloning as the instructions don't say, so don't know if theres nothing running that may affect it. The instructions are pretty basic but seem pretty simple, so I do not see where I am going wrong.

  Does anyone have experience of this type of problem and how to fix it.

  Thank you very much

  A few months ago I acquired a regular copy of Acronis True image for my G20.

  After that many negative attempts to use the program, who do not recognize the disks
  I asked for help using Acronis
  which solves the problem brilliantly, sending me a special version on purpose
  for the difficult features of the Qosmio system.

  If you an e-mail to the Acronis media, they probably have in the Archives of the version
  for the Qosmio G20.

• Qosmio G20-123 with two questions (WIFI AND ELECTROSTATIC)

  I BOUGHT THE QOSMIO G20-123 ON 30 OCTOBER 2005, FRANCE.
  IT'S THE SECOND QOSMIO I (I BOUGHT THE FIRST QOSMIO G10-126 OF FRANCE IN JANUARY 2005 AND IT WORKS PERFECTLY FINE). NEEDLESS TO SAY THAT I ONLY BUY TOSHIBA BRAND FOR MY LAPTOP SINCE THE YEAR 2000.

  UNFORTUNATELY, THIS NEW QOSMIO G20-123 HAS TWO PROBLEMS.
  I WILL ADDRESS THE TWO ISSUES AND THE RESPONSE THAT I RECEIVED FROM TOSHIBA LEBANON (WHERE I LIVE) I HAD THE EXPERIENCE AND THEY HAVE VERY GOOD TECHNICIANS AND SERVICE.

  FIRST PROBLEM: WIFI CONNECTION
  I HAVE THE APPLE AIRPORT EXPRESS AS ACCESS POINT, WHEN I CONNECT THE QOSMIO WIRELESS ACCESS point IT STARTS WITH a SPEED OF 54 Mbps THEN IT COMES down to 1 Mbits/S.i. HAVE to PRESS THE BUTTON REPAIR so that the speed is up to 54 Mbps, and then a few minutes later, it comes down again once at 1 Mbps.
  SO FAR I HAVE NO RESPONSE FROM TOSHIBA ON HOW TO SOLVE THIS PROBLEM.

  SECOND PROBLEM: FIELD ELECTROSTATIC AROUND THE SCREEN

  WHEN I TOUCH THE METAL OF THE LCD FRAME, THERE IS A LOAD ELECTROSTATIC, FLUCTUATING TENSION ALL AROUND.
  IT SEEMS THAT IT LACKS A PLUG OF EARTH (EARTH) SOMEWHERE... I'VE EVER SEEN AN ADAPTER TOSHIBA WITH A SHEET CONTAINING 3 HEADS (EARTH).
  SO FAR THIS PROBLEM TOO HAS NOT BEEN RESOLVED.
  ALSO AS I MENTIONED HIGHER, MY OLD QOSMIO G10-126, WHICH IS PLACED NEXT TO EACH OTHER, USING THE SAME ACCESS POINT AND THE SAME ELECTRICITY INTAKE, AND IT WORKS PERFECTLY WELL WITHOUT THESE PROBLEMS. WHAT SOMEONE HAS THESE PROBLEMS?
  CAN YOU HELP ME SOLVE THEM?

  Thank you
  MARCEL

  Hi Marcel

  It would be very interesting to know what type of card your Qosmio WLan?

  Concerning