Qosmio PX30t all-in-one: black screen after a few minutes of inactivity

Similar Questions

• Screen saver goes to black screen after a few minutes

  My screensaver goes to a black screen after a few minutes

  Hello

  It is supposed to do that by default

  normally a screensaver lights after 10 minutes then after another 10 minutes, the screen will become black according to the parameters of exact time for her

  It is a function of energy saving

  If your problem is different from the above, please explain in more detail

• Re: Satellite L755d - all browsers except IE8 crashes after a few minutes

  Hello

  I have a Toshiba l755d for a month. Everything works well except firefox, chrome and opera.
  IE8 works. At first I thought it was just firefox because I just test firefox.

  SO I wrote a thread in my own language for firefox forum. Nobody has been able to help me with this problem of accidents. Then I thought to test other browsers that eventually does not work too.

  So finally after update of everything and anything that I decided to reinstall windows so no change atm there is nothing on my hard drive but windows 7 home premium(64bit), pilots, recently extend java, flashplayer, firefox, opera and chrome.

  Short:
  -all browsers except IE8 crashes after a few minutes
  Firefox - forum couldn't help me
  -l' laptop is new
  -everything is updatet to current version

  Any ideas?

  Cheers!

  Hello

  How about IE 9?
  Is it too much to plant?

  Able to recover the laptop once more you use HD recovery or recovery disks (that you have created in the past hopefully) in order to test the browsers with the Toshiba factory settings?

  This error message you received while the laptop crashing?

• My computer keeps going back to the logon screen after a few minutes

  My computer keeps going back to the logon screen after a few minutes

  Hey Missy,

  In addition, you can go through this post.

  The main reasons for this problem is a corruption in the registry key that contains the value of the files that are executed during the connection to windows. This registry key can get is replaced by an incorrect value, or it might get corrupted due to a virus / trojan activity.

  See if you can solve this problem by running SFC (System File Checker) scan in safe mode.

  Step 1: Start the computer in safe mode

  Using safe mode, see: start your computer in safe mode

  Step 2: Scan SFC

  This analysis relationto with system files integrity problems and trying to fix the same. If the scan does not automatically, you can try to repair these files manually. Detailed information is available here:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 2305 Dell all-in-one - black screens random

  Model purchased Feb 2011. Good reliable system, however in the last 2 weeks, after coming down from system, it crashes on black screen after sitting idle for 10 minutes about. He turns not off - just goes to black. Then I have to turn it off. When I go back to the task, I restart and all right until I get off system and then 10 minutes later, the screen goes black.  I would like to look inside to check the status of the dust, but not sure whether or not the back detaches. This sounds like an overheating situation? Maybe I should run the diagnostic on it. Any thoughts would be appreciated.

  

  Configuration of the system (BIOS) update

  www.YouTube.com/watch

• Pavilion MS225: all on one black screen help

  Hi, from Thursday morning, I noticed a light flickering on the screen on and off during the day, then that night, the screen went black all of a sudden, I could put in sleep mode and wake him up, things went very well after that.  I turned it off for the night and kept overnight get this screen black (I could barely see the bottom of screen and icons) but I was able to see my login page for a few seconds when wake-up mode 'sleep'.

  I went to updates and saw that the Realtek High Definition Audio Driver need updated, so I tried and failed so he can install from Windows. I could see the screen enough to get on the industrial site and uninstall and reinstall. I reinstalled graphic discs too. Now, it seems to work very well, not black screen or flashing for about 5 hours now since the update the Realtek device. I was wondering if that was the question all along, is that this driver not getting updated cause screen problems? I also installed AMD Catalyst Install Manager and it updated the drivers.

  Honestly, I don't know much about computers and it is the only one I also gives access, any help would be appricated! Thank you

  Hi there @slyn1234,

  Welcome to the Forums of HP Support!  It's a good place to find the help you need, other users, HP experts and other support staff.  I understand that your computer screen went black, and after updating the driver it works again.  I'm happy to help you with this.

  In response to your question, as to whether that was the problem, I'll give you a qualified Yes. It may be that the driver has been updated but that something has happened to the existing driver, the file has been corrupted, or another program or driver was installed that are in conflict. Another option is that a setting has been changed somewhere; There are several possibilities.

  If this kind of thing happens again, see if you can boot your system with the help of computers HP - safe mode of Windows 7. Windows safe mode will load with the base drivers and is a way to access your system, if it seems that there is a software problem. Can be modified in Mode safe as parameters to display, or drivers, or uninstalled applications that may not be easy to dismantle a normal start.

  Another useful to look at document is: HP PC - computer won't start (Windows 7). I hope this helps.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Help! -Acer Aspire all-in-one touch screen after upgrade Windows 8 Pro

  Hi all!

  This is a rather confusing questions and about * me off no end!  I know that some of you may have encountered this already and could have a potential solution?

  I have an Acer Aspire all-in-one, AZ5101 (Aspire Z5101), with 4 GB of RAM, etc..

  Since the Developer Preview of Windows 8 came out, I've been running Windows 8 perfectly.  I completely uninstalled (each time itself) and run the following:

  Windows 8 Developer Preview, 64-bit

  Windows 8 Preview of consumer, 64-bit

  Windows 8 Preview, 64-bit version

  In any case, on this PC worked perfectly - y INCLUSIVE of the TOUCH SCREEN.  I never had a problem.

  So far so good.  Then, they finally released updates Windows 8 Pro official licensed by download.  I bought the upgrade and downloaded.  Just like in * ALL * other cases, upgrade, I chose "keep nothing" of the old system (I never really got all the important data on here), and do the upgrade itself.

  After the upgrade was complete, and ALL Windows 8 Pro updates have been applied by Windows update, I have a system where the screen is clear and precise, everything works, and all devices in Device Manager, show the Greens well, it works fine - NO ERRORS.  HOWEVER - NO CONTACT!  No touch no screen function at all.  The screen now has this time as a standard monitor.

  I tried the driver Idéacom - no luck.  Anyone know (please? LOL) how to get the touch screen to work again?  Thank you very much!  I really appreciate any help you can give.  Microsoft technical support had NO idea and no reply emails from Acer! Laughing out loud

  Thanks again,

  Mike

  [edited to conform to the guidelines]

  Hello Mike

  I sent the pilot. Please test and advise.

  Kind regards

  FReeZA

• Qosmio F50-125 starts with black screen after a BIOS update

  Hello

  After instalation if new bios (v 2.0), computer sometimes starts with black screen.
  Even the first page that show press F2 to enter the bios is not displayed.

  You have someone older version of bios?
  So, I might try if it's the fault of it.

  Hello

  I think that the old BIOS will not help you because the laptop would have known that you try to update the BIOS to the older version, and it would break to the top of the procedure.
  In addition, the older BIOS is not available on the European driver Toshiba page.
  I think just only a Toshiba ASP had an older version of BIOS.

  Anyway, you said that sometimes happens.
  This means that this issue doesn't still persist
  Hmm. in this case, I recommend the default BIOS settings and update the driver display.

  Check it out!

• HP 18-5110 All in One: Blank Screen after sign in

  I've got the unboxed appliance Monday and everything worked well on setup. Yesterday I logged, the HP logo appeared, the computer is going through the motions but my screen is empty. Periodically the boxes located in telling me that I'm connected wireless, but it's not office. I can ctrl alt delete and restart. Yesterday evening to restart computer has several updates, but the screen is still blank. I tried to unplug the unit, the power button. I pumped F8 followed the steps in this forum and still nothing. I have made ESC and F2 and carried out the tests on the hardware, diagnosis, and everything came back with "past". Are there suggestions more or do I just a loser?

  Hello

  Try this and let me know.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  At the bottom left, select details (if it is not already selected).

  Click in the header of column Nsoul to organize the processes in alphabetical order.

  Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

  The office is now show?

  Kind regards

  DP - K

• Envy 17 jump notion j100: black screen after a few updates

  Need help.

  After a few updates, had a blue screen after Windows booted reset. Restart - black the next screen.

  Tried to connect to the other screen - does not not (f4)

  memory, hard drive out - nothing

  hard reset - nothing

  Win + b and start - nothing

  on the power on lock shift - 2 led flashes pause, pause 2 flashes and etc.

  looks like bios, what to do?

  Any solution?

  Hey @serhiox,

  If these steps did not work, try the rest of the other measures in the document to restore the BIOS and update the BIOS if Windows does not start a section of the document updating the BIOS .

  If you can get into the BIOS at all, you can try to reload the default settings? To reload the factory-installed BIOS configuration settings, perform the following steps:

  1. In the BIOS Setup utility, select the tab out.

  2. Select message Load Setup Defaults.

  3. Select Save Changes and Exit (pressing F5 and the Enter key will also load default configuration).

  4. Press ESC, then press Enter to exit the installation program.

  Please let me know how each step works for you.

  Thank you

• Qosmio X 870-13 L - black screen after upgrading Ram

  Hello

  This is the 2nd time that I buy ram to upgrade my PC and it does not work. My PC has 2 theses ram already installed when I bought, and they are 4 GB each:

  "PC-12800 DDR3 800 MHz 11-11-11-28 M471B5273CHO-CKO samsun.

  I did some research before buying ram and saw that I had to buy the same frequency, CL and tension.
  So I bought this RAM which has the same exact settings as those already installed, but as soon as I insert it, I get a blackscreen on startup, can't even get to the BIOS. :

  http://www.Corsair.com/en-AU/Corsair-Memory-8gb-DDR3L-SODIMM-memory-cmso8gx3m1c1600c11

  Then I returned and bought theses two instead because people told me that the ram could be defective or my motherboard doesn't like two channels + 1 single channel:

  http://www.Corsair.com/en-us/Corsair-Memory-8gb-2-x-4GB-DDR3-SODIMM-memory-cmso8gx3m2a1600c11

  but here again, I have a blackscreen when they are inserted, I tried to put both or only 1 in the 2 available slots, but no matter what I do it does not work, the computer works fine when I remove the ram I bought.

  I even flashed my BIOS, but it did not help.

  So what I would get is a link to a 8 GB ram kit that will work for sure because I've already lost 15 with delivery.

  Thank you

  The problem is related to new RAM modules.

  I assume that there is only one real solution: you must replace the modules and must use compatible parts.

  The Corsair DDR3L module seems to support the 1.35v (test voltage).

  As far as I know Toshiba recommends the module PA5037U-1M8G (8 GB 1600 Mhz PC3-12800) who favour the voltage 1.5V.

  So I guess you need to use the support 1.5V modules

• Arc keyboard stops working after a few minutes of inactivity

  The arc keyboard stops working after about 10-30 min to be idle. I can unplug/plug usb receiver or take out / replace batteries and still doesn't work. I have to restart the computer to make it work again. Any ideas?

  Thank you

  Hello

  Please update us with this information.

  I suggest you to update your computer with the latest version of the Microsoft IntelliType Pro for your keyboard and check if that helps.

  Keyboard Microsoft IntelliType Pro 8.2 for Windows - 32 bit software

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=26949

  Keyboard Microsoft IntelliType Pro 8.2 for Windows - 64 bit software

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=26950

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• Windows 7 computer hangs after a few minutes of inactivity

  I have a HP G62 that uses Windows 7. When I don't use the computer, it will freeze and not allow me to do anything other than the manual switching off the computer. Restarting seems to go fine, but a few minutes of inactivity, it will freeze again. Can someone help me?

  Use Norton Cleanup utility:
  http://MajorGeeks.com/Norton_Removal_Tool_SymNRT_d4749.html

  to make sure that it is gone.

  What is your Antivirus solution now?

  Can run MalwareBytes and SuperAntiSpyware (full crawls, free software) and remove any they find.

  Also change your screensaver to something basic (white) and adjust the time to 20 minutes.

• SOP C70D satellite after a few minutes with YouTube in fullscreen

  Hello everyone,
  Old nine C70D of two days, if I want to watch Youtube video full-screen after a few minutes, the C70D stops, blue screen with a message: your computer becomes a problem, we collect information ect.
  After a reboot, the same problem again a few minutes later.
  I have 14 days to accept this machine, but if it's a problem of graphics card I'd rather go back to the seller.

  Thank you in advance for your answer.

  Thierry

  Hello
  Try to retrieve the laptop initial configuration by using the HARD drive recovery option and test the functionality of mobile after that drive HARD recovery has finished.

• Qosmio X 870-149 - black screen after update to 8.1 win

  After an update to win 8.1, I got a black screen after connection, the only thing I could do was to press zero when starting and make a recovery facility.

  It took 40 hours, I don't know why it took so long, but when it was over, the HARD drive was completely empty, so I installed win 7 instead, because I had not done? a restore CD. The problem now is that I still get black screen between the two, and think it might be a heat problem, I still have the warranty, but I don't know if it applies when I installed win 7 on the machine.

  I still have a warranty on my Qosmio toshiba

  Hello

  Well, the guarantee covers material related problems. It does not any problem with the software.

  Now the question is: why the black screen appears?
  Is - this problem is hardware or software?

  What happens if you access the BIOS?
  You don't see anything on the screen?

  Something is visible on the external monitor?