Quad Port Nic has not seen on DELL R510 host

Similar Questions

• 10G or Quad Port Nic

  I am currently working on which is better 10 G or a quad port NIC.

  We have a server ESX (VMware standard) which began life as a server test and production of six months four vm who are there path on this box. I got a small budget to spend these four virtual machines to a new box.

  Our goal right now is to move the production virtual machine to a new box and at the time of six to eight months to look and VMotion, DRS.

  We have little space on one of the units of san to cover four virtual machines and growth.

  I was looking at a Dell poweredge 2950, 2 x Quad core CPU, 32 GB of Ram, 2 x 15 k HD in Raid 1, 2 x 1 integrated nic G, I have 2 x 4 GB spare HBA for the san. And the intention to use a base of VMware license for this box. (Limitation is 3 ports PCI Express x)

  Now, this is where the issue comes in I buy a quad port nic and divide

  1 integrated network interface and Quad port nic 1 = Service Console
  2 integrated network interface and Quad port nic 2 = VM vSwitch
  NIC Quadport 3 and 4 = Vmotion (later when we improve)

  Where can I buy a dual port 10G nic (EXPX9502AFXSR) and push the VM vSwitch and Vmotion on the 10G and create virtual networks for the Vmotion at a later date.

  Thank you

  Nick

  We yesterday the same Dell PE2950 with a Quad nic and 2 HBAs - so that the config is ok, but I would have preferred 2 network adapters for the console and one for vmotion - or joining the 3 env set for virtual machines and vmotion.

  And don't forget the consolidation of the different network interface cards (intel and broadcom) is not recommended - but works by us without problems.

  If you already have 10G infrastructure, then you could get 10G network cards - but I wouldn't say not-expensive (just normal network).

• ESX 4.1.0 detects no no new Quad port NIC

  I came to work today to install some other Quad Port NIC in our ESX 4.1 cluster.

  I bought Intel Gig ET2 Quads to go with the Intel Pro/1000 PT Quad already installed on host computers.

  The ET2s are not detected by ESX but I can put an another Pro/1000 PT in and which will be displayed.

  The ET2 is on the HCL for esx4.1, so it's a matter of not being able to mix and match the network interface cards? Or is there something I need to do to get it to load the drivers?

  I wanted to get the ET2s in there for the unloading of network processor. but I have enough to replace all NICs outright.  We are in a transitional phase and are in need of more ports uplink for a few months but the ET2 seems to be a better card.

  There is a good chance that you may need to add drivers. http://www.VMware.com/download/vsphere/drivers_tools.html

• Quad Port NIC

  It is advisable to put the LAN CONNECTIONS and a DMZ LINK on the same quad port NIC?

  I want to be able to use one of the ports on the NIC Quad for my Web DMZ VMs.

  Of course, this is no problem.

  If you bring a direct of DMZ in vsphere you will find vshield a product useful to try.

• Manager display Dell has not detected monitor dell

  Hi, my dell optiplex 9010 cannot detect the monitor, he said: it's a generic non-pnp monitor and I can't get full resolution. Is this a common problem?

  DDM will not say 'this is a generic non-pnp monitor', but Windows will if there is a connection problem and if Windows has a problem connecting DDM will not work. First of all, check your cabling and physical connections of the Optiplex and the monitor. Once the connection problem is resolved, you should get full resolution and DDM will start working again.

• Quad port nic pass through'ed by individual ports

  Hi guys. I want to know if I can passthrough some to vm1 and some ports to vm2 to the multiple port network card adapter. (including card intel i350 t4)

  Thank you.

  Hi Colin,

  Yes, you should be able to do this, I took a quick look at one of my boxes, and it seems that you can split I350.

  You must configure the device to pass first and then return each NIC that you went through, the virtual machine that you want to. I added a photo to show you mine (not cross at the moment).

• The dhcp server has not seen a directory for authorization server

  I recently upgraded from Server 2003 to windows server 2008 r2. After the upgrade, the DHCP server has started to not giving IP address after a lease has expired. For DHCP to provide IP addresses, I have to restart the server. I need help on how to configure my server to allow the service to restart. Any help will be much appreciated

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to solve usb port? has not detected printer or other devices.

  the two ports usb on the right side of the pc does not detect devices that are plugged in. Only 1 port (usb) to work. have updated, reinstalled (after deleting)... you name it, I did it. Help, please!

  Click RUN - SERVICES. MSC - OK - find PLUG AND option, make IT AUTOMATIC STARTUP TYPE-. FINISHING.

  RESTART YOUR COMPUTER, GO TO THE BIOS SETUP, FIND 'USB PORTS' MAKE IT ENABLE.

  TURN IT BACK ON. Good luck

• I created a form using Acrobat DC and has not seen how constrain text input. For example, I want only the alpha characters in my name field, will not accept dates after 1930, ect. Where is this feature in the drafting of forms to create?

  How to create a text field to create a form to fill out from MS Word, who is obliged by using Acrobat DC form design? For example allow alphabetic characters only in this area. Or allow only the dates after 1920?

  Hi michaelg31489520,

  You can set properties for form field in Acrobat DC also PDF, Adobe Acrobat form field properties.

  If you want to implement all the constraints you can also use JavaScript.

  Kind regards
  Nicos

• Additional LUN in CX300 not seen by the ESXi host

  Hello.  We have an ESXi server.  There are currently two VM.  The data store is in the Dell - EMC CX300 SAN.  We want to add more virtual machines then I burned another logic unit number in the SAN.  My co-admin who manages the ESXi said that he could not see from the ESXi Server!  He needs to restart the ESXi Server?  What he must do to make the additional storage space is available on the ESXi Server?

  Thanks in advance.

  He will have to rescan the HBAS. And maybe even twice...

  Duncan

  VMware communities user moderator

  -

• Support Quad port PCiE NIC to ESXi 3.5 Installable U3

  I have a Dell 2900 III which works very well with ESXi via onboard network cards.

  I need to add additional ports and hoped to do quad port NIC to get the most bang by the extension slot. Problem is that I can't find.  I checked the HCL, and it seems that ESXi supports only NICs to double port.  Is this the case?  Can anyone out there tell me if they have quad port NIC with ESXi, and if so, what model?

  See you soon.

  Quad-port NIC Intel are actually two dual-port chips on one card.  It should work fine.

  Jason Litka

  http://www.jasonlitka.com

• Intel Quad Port Adapter AND

  How the 4 ports on an Intel Gigabit AND Quad Port adapter do not appear on ESXi?

  They appear as individual Ethernet Nics or if they present another way.

  I want to add 4 ports on my machine of ESXi.

  I discovered that I can not use LACP entirely in ESXi so my only other option is to direct connection my NAS units through their own nic on ESXi.

  So in summary, I need 4 Gigabit ports assigned to a VSwitch.  Each will be assigned to a SAR unit.  In this scenario, the AND will work as I think it does?

  FYI, I have and available PCI - X slots and only one only PCI-E 8 x, where my choice of the adapter.

  Thanks for any information you can provide.

  They will appear individually.

  Rick Blythe

  Social media specialist

  VMware Inc.

  http://Twitter.com/vmwarecares

  http://Twitter.com/vmwarekb

• Install ESXi 5.1 costs do not see NETWORK Intel PRO/1000 PT Quad Port LP cards

  I recently did a new install of ESXi 5.1 and the server does not see my card Intel PRO/1000 PT Quad Port LP.  This NETWORK card worked perfectly fine when the server had ESi 5.0 Update 1 installed.  I check that the NETWORK card is on the list of compatibility for 5.1.  Everyone knows about this problem?

  Edit: The card on a Dell PE R510.  Onboard Broadcom network adapters work.

  software esxcli vib install d - n net-e1000e /vmfs/volumes/datastore1/ESXi500-201207001.zip

  software esxcli vib install /vmfs/volumes/datastore1/ESXi500-201207001.zip d - n net-e1000

  Network is working

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Error message "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. Unplug all printers on this port, and then delete this port.

  Original title: 'RedMon Redirection Port Monitor': pray, harming this pose to my pc?

  I recently tried to download a free pdf creator, after which I noticed "RedMon Redirection Port Monitor in my program Menu. I'm exhausted trying to delete it, and yet I get this response: "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. "Unplug all printers on this port, and then delete this port. I need help to deal with this, as I suspect that the Redmon may pose harm to my pc

  Hello Apollo,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it seems that you are having problems with uninstall Redmon as it gives the error message "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. "Unplug all printers on this port, and then delete this port.

  Perform the steps in the link to uninstall Redmon.

  http://pages.cs.wisc.edu/~ghost/RedMon/en/redmon19.htm#39

  Answer to us if you are having problems with Redmon or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.