Quality properties?

Similar Questions

• Had to remove white background for use on dark background

  Hello

  I have a picture of some people on a white background stock. I need to remove the white background, so I can use the image in a project with a dark background. However when I put the subjects published on the dark background, people have all of the visible white borders around them which I suppose means I get not all whites, especially around the hair. Can anyone recommend the best way to overcome this? Thank you.

  Can anyone recommend the best way to overcome this? Thank you.

  There is no single 'best way '. It depends on the resolution of the image and its other quality properties. The - theoretically - more clean and less workladden method would be to extract the luminance for example by converting mode Lab and the channel of the selection, and then adjust the range of channels. However, if the plan contains also a lot of bright colors, clipping back the black channel and points white also would affect them and you would need adjustments more to compensate or work with the mask tool refine much to the edges of the pen as you would with a mask layer conventioan, created from an interactive selection. In addition to this, you should always also apply to all the other dirty tricks like the use of an inner glow dark to cover remaining clear areas or fill with a color dark outside... Really depends, but you should be prepared to invest the time. Verbose using of manual painting and cloning may even be necessary...

  Mylenium

• My operating system is Windows XP and the display color quality setting properties automatically by default, low (8-bit) then access to Photoshop, this problem just started.

  Every time I use Photoshop CS5, the color quality setting in display properties by default on bass (8-bit), and I have to change the settings back to the high (32 bit) in order to use Photoshop. This has happened for at least a week; Why this problem persists I don't know.

  Thanks for writing. I have an Intel 82865 G Graphics Controller and I think I have the latest drivers, but your answer refers specifically to a device driver. So I hope to go online at the Intel Web site and search for a device driver. I'll let you know if it works and thank you once again.

  Could try their utility for the identification of such things:
  http://www.Intel.com/p/en_US/support/detect?IID=dc_iduu

• HP Officejet 4500 crashes when you click Properties to change the print quality

  There is no answer to a minute when I want to change my print job properties after clicking on the properties button. I haven't changed anything concerned with the printer, what the problem and how can I solve it?

  beckybeib,

  Also, make sure that you do NOT connect the USB cable until the software tells you to connect, when you reinstall the software.

• HP Envy 15 t (G0T59AV): HP Envy laptop speaker poor sound quality (particularly acute) as the volume increases.

  I had been without my HP Envy laptop a few weeks after he bricked on me and I had to send in for repair, and when I came back the sound quality seems to be noticeably worse than what I remember. The sound in general seems a little intestine initially, and it does not handle certain tones fine treble, producing shrill notes that almost seem like they're clipping or something, as if it's too much for the speaker to manage. The volume level refers to it - it's much worse at higher volumes, but its volumes, it should be able to manage, and has dealt in the past. 30 is basically normal, I'll hear parts of it start happening about 40 volume or so, 60 sounds evil, and 80 is almost inaudible.

  My first suspect is the dustbin of Beats Audio with what they sent this thing.  He gave me problems before. I fiddled with the Beats Audio settings for a bit and couldn't find a lot of luck. The strange thing is, I searched Beats Audio driver updates, and I came to the top completely empty. All links to them were either broken, be directed to the page of HP support containing the drivers for the specific device model questioned. The driver for my laptop page shows nothing about the drivers of beats. And my device manager doesn't seem to show that no driver present Beats, either, even though I SWEAR there drivers for them in the past. The only present audio device is the Realtek HD Audio driver. The Beats Audio utility in the taskbar does not seem to think there is something wrong, however, so I don't know what's the case. Can someone help me?

  (I know of no reason that the question I sent my laptop in for repair would be linked to this, nor do I have any reason to believe that the person who repaired the laptop could have done anything, as all my files on my HDD seem to have been completely intact, but just for the sake of rigour : A couple of weeks, apparently caused by me accidentally stick a 3.5 mm headphone jack into the adjacent USB and damaged brick my laptop. The computer, stop immediately, if she was able to start right back up. The next morning, it was completely insensitive and would not start until it was. I knew with certainty that it is the USB at the time, I thought that it was unlikely that a damaged USB port might cause a full brick computer, but when I got back from repair, the repair summary said that the only thing to do for she was replacing a USB port.  Other than the good question, my computer was working perfectly since.)

  Hello
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY 15 t-k100 Notebook and problems with sound not working not properly. You can try-

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on the speakers.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window. Reboot the laptop and test the sound.

  You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a link to a Microsoft fix for Windows 10, that might help.
  
  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• Can not set the print properties

  Just loaded FireFox 4.0.1
  When I click on
  file
  print
  and the print window opens if I click
  Properties to define the quality or black etc. only I get
  an error box that says:
  Error
  Prop Res DLL not loaded

  I tried exactly the same thing using Windows internet explore and the Word for windows, and these all are working
  perfectly. I can click Properties in the print window and
  the value of what I want on my printer.

  I rebooted and no help.

  I'm about to go back to the previous version of Firefox
  Since I print a lot of websites and I often
  you want to set the print mode project to save time and ink.

  Can you offer any suggestions other than coming back
  the earlier version?
  Thank you!
  KyDan
  Louisville KY

  This seems to be a problem for a long time with the Lexmark printers who has just started to happen in Firefox 4.

  An example
  
  http://forums.techarena.in/MS-Office-support/596409.htm

  This Google search.

  Check out this thread for support for a solution that has worked in 2006 for a similar problem with another Lexmark printer. I hope that something like this will work for you.

• Satellite L40: low sound quality

  Hello

  I have the problem with the sound quality in L40.
  Some at the level of the volume of some movies divix is good but in a bit of sound is very low. Likely it has connected with setting the sound card and when I play the movie with surround codec, the sound is very low, but when I play movie in stereo codec, sound is loud and clear.

  Where can I change the audio settings and make sure that movies with sound wil surround play in stereo?

  PS. Sorry for my writing, I know is terrible ;-)

  Hi Darckar

  Satellite L40 unknown for me, but all the settings of the sound that you can find in Control Panel under sounds and Audio devices. Check all parameters, in particular under the Audio tab > audio > Advanced Audio properties.

  I don't know if this will help, but you can check in any case.

• Pavilion 14-v060Br: Remove audio beats without loss of sound quality

  As many customers know, audio beats produced distortions and can be very annoying.

  After a lot of research here, I could remove from Beats Audio and install generic drivers, but then I lost the quality of the sound and equalization that I would have with original drivers.
  
  I would like to know if there is no driver, perhaps from a laptop with a similar material, which can give me back and quality equalization, without the distortions of Beats Audio.
  
  HP shoud really solve this problem.

  Only, I solved the problem.
  
  I use a HP Pavilion and the soundboard is Realtek, so if your soundboard is an IDT, the solution is different, but I found many topics on the problem of the IDT and I think it was has been resolved.

  Here we go:
  
  1 uninstall all the drivers, you need to me probably do it in different ways: try to uninstall by ' Panel > uninstall a program > > Unistall Realtek High Definition Audio ' then open the Device Manager and go to "Audio, video and game controllers" and uninstall it too. Probably, there is two options, uninstall both of them. If there are more, uninstall all audio drivers you find. Edit: I forgot one thing, if you have the Support of HP software installed, unistall it too.
  
  2. do NOT restart the computer, if you do this, windows will install the generic drivers.
  
  3. go to 'http://www.realtek.com.tw/ > downloads > High Definition Audio Codecs (software) "and download one of the first two options (32 or 64-bit, with 103161 k or 128412 k files). Install and reboot the computer. I'm not sure but maybe you have to restart the computer two times.
  
  4. the Realtek Control Panel manage will start with windows and equalization will be back, too, the Equalization of the volume that distorts the sound will be gone, but you can check or uncheck in the control panel.
  
  5. If the Equalization of the volume or any other effect is always on and its reduction of the quality of the sound, the right click on the sound icon in the taskbar and then click "Playback devices", then click right-click in one of the devices and select "show disabled devices", then click on 'Speakers' with the right button , then 'properties' and then 'improvements', there you can disable or enable whatever you want, including equalization EQ and volume (witch kills the sound when active).

  6. what a shame you HP.

  I hope it helps.

• Camileo P10 - how to see the videos in HD quality?

  Hey

  My HD Camileo P10 camcorder records HD, but when I play the recording in my media player in windows 7, it looks like an old VHS tape.
  I tried many media players such as winamp, quicktime and VLC Player, but all the same.

  How is it, I can get to show movies in HD quality?

  concerning
  Brian

  Hey Buddy,

  You have HD camcorder recording format? I ask this question because Camileo P10 also allows to record QVGA resolution, and it looks like an old VHS of resolution.

  Also on the computer, right click on a video file of Camileo P10 and select Properties. Then choose the Details tab and check the width of the frame (for example 1280) and the height of the frame (for example, 720).
  It would be a resolution HD and FHD resolution is 1920 x 1080.

• Satellite A60: Sound quality poor microphone when you use the USB phone

  I have problems with the microphone/recording quality on my A60 including but not limited to situations when you use a USB phone. Talk to the USB phone produces a lot of static when it is used with the A60, which is not the case when I use another laptop.
  The two laptops have the same VOIP software and "simplyphone.

  Any ideas what could be the problem? Drivers?

  Toshiba support suggests to see if a system restore will improve things, but I am reluctant to go there for a questionable result.

  Hello

  I don t think that the driver update will help you. The operating system uses the simple common Microsoft USB drivers. I think we should get the problem somewhere else.

  You can try to disable the power save option in-USB hub-> properties > Device Manager. I noticed that if energy saving is enabled on ports USB some external devices could not work with maximum efficiency.
  In addition, you should disconnect other USB devices during the test the USB microphone.
  I think that it of not impossible that some external USB devices might have a negative influence on the use of a USB microphone.

  PS: I found a site interesting on tests of micro USB
  http://www.voicerecognition.com.au/dragon_microphone_review.htm

• Poor quality of the sound on Satellite L855

  After having a Toshiba laptop computer previously, I bought a new L855 Satellite Saturday. It's sad to say that I am REALLY disappointed by the speakers and the sound quality. Especially as stickers on the machine say "large speakers for a deeper sound. It sounds really hail. Far worse than my ipad or iphone :-(

  Any sggestions?

  Hello

  Your laptop supports a Realtek audio chip. Right?
  In Control Panel, you can find the DD Realtek Audio Manager.

  Here, you can change the sound effects, you can change the sound properties and can add some bass using the equalizer settings.

• OfficeJet 6815 e All in One: 6815 Officejet print low quality on pc and high quality on devices

  Purchased a new HP Officejet 8615 e All in One and finally got it working after hours of shyte with unistalls and reinstalls. Now it works, but it prints documents with best quality of my laptop, iphone, ipad, and acer. From the pc, it prints out horribly. Downloaded a software/driver full features and always bad impressions from the pc.

  He is currently connected wireless. The printer test pages are all of good quality, all in colour. Scan doc says it all is green and works correctly.

  Obviously, there is something missing on my pc...

  Any ideas would be useful.

  THX

  Thanks for providing this information @MikeG7.

  Yes, it sounds like a driver problem. You should have a lot more options at your disposal.

  I checked online and the only available drivers are the base drivers. I suggest you update this driver to see if you have additional features that are available for the Windows XP computer.

  In the windows printers and faxes, right-click the printer and then click printer properties.

  Click the Advanced tab.

  Click new driver.

  Next.

  Select the HP Deskjet 990c printer, then continue the wizard.

  Apply the settings.

  Check the print settings and try them and print them out to see if the quality is improved.

  Keep me posted! Thank you!

• Quality screen/questions/problems

  Hello

  I recently bought Lenovo3000 Y410 of Thailand. Everything else is fine - I'm just too anxious to display quality. It seems that the LCD screen is not as bright and clear enough. I used a Compaq Presario with 15 "WZGA who compared to this one was very bright.

  Y at - there anyhing I'm missing? I downloaded the latest graphic driver of site Web lenovo, attempted to change the properties of InterAGP but seems unhappy.

  Or maybe it's just Ok I'm being paranoid!

  (also for those who want to buy it - I recommend positive entirely).

  Gaby

  Lenovo3000 Y410, T8100 2.1 GHz, 2 GB RAM (667), 3 MB of L2 Cache, 250 GB HDD, 14 '', Wifi/BT, WebCam / / / / / /.

  Compaq Presario likes to use a screen bright and not dull, while Lenovo has a preference for the mast. So is also well your flat screen or brilliant, besides some screen are just WXGA while some are WXGA +, even similar screens from different manufacturers have different maxmium nit. Which translates the different display brightness.

• hp beats audio quality

  I was hoping to ask for some advice on the poor quality of the sound I get from my new laptop (DV7-4069) Hp. Music played on it sounds bit deep & slender at best despite the presence of a subwoofer bass & audio beats technology. The parameters Panel audio beats Hp makes no difference significant in my opinion. I have naturally draw comparisons with my last laptop (Hp pavilion ze2000) which, with its altec lansing speakers have a fantastic audio quality. Makes me wonder what all the hype is around the hp beats technology unfortunately.

  Any suggestions to get a fuller, better sound? Thank you very much

  I just got my phone yesterday and I tried to figure why sounds audio beats like Doo - Doo.

  I found a way to make the balanced sound and not uber hectic.

  Go to Control Panel > sounds

  Click on the speakers and headphones > Properties

  Under improvements you can choose what you want to improve.

  I clicked on Bass Boost, Virtual Surround and collected Loudness.

  Next is the most important, click levels.

  When I first clicked it my bass was equal to-20 and my treble 4. 100% opposite poles and it was the default settings!

  I put my bass 4-0 and I hear not and crack or break. I'm happy now.

  You may also need to play with the EQ levels in the Interface bat to get straight for you, but the sounds of decent Beats Tour setting now.

  I hope this helps.

• Problem with display properties.

  Original title: internet explorer 8, windows xp, hdmi connection works. Cannot get parameters with two screens no. 1 and 2 more.

  I sent this problem recently, I got a response that has not fixed the problem as I don't think that they read my question properly. I sent a reply thank you and said what is the current problem.

  I get the same email back me time and time again.

  PROBLEM. When I go to view/settings. I no longer get the icon with two blue screens, numbered 1 and 2. If I did, I could fix my problem.

  Instead, I get a box entitled display properties, which deals with the screen resolution and color quality.

  where is my box with two blue screens went, how do for her?

  Thank you for any input,

  Jerry.

  Hi Jerry,

  I'm sorry for the inconvenience that has happened. I will certainly help the question of fixing.

  I may need a few more details to better understand the issue.

  1. What is the number of brands and models of computer?

  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest you to update the latest display drivers on the manufacturer's Web site and check if it helps.

  Method 2:
  If the problem is not resolved, you can try to create a new user account and check if you are faced with the same question.

  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  If the problem is resolved in the new user account, you may have corrupted user profile. See link below for troubleshooting a corrupted profile.

  How to copy data from a corrupted to a new profile in Windows XP user profile: http://support.Microsoft.com/kb/811151

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.