Quality screen/questions/problems

Similar Questions

• Screen touch problems when you use the converter

  We just bought an Envy 27 tilt to our Caravan for all the good characteristics that HP has and TV

  Cause sometimes will want to run the HP converter 12v 400 watt true sine wave.

  We tried this to find a problem, the computer functioned well but the touchscreen ran a muck and did not work as usual.

  So after much googling and some reading I'd like here to answer fo HP.

  As I can't believe, I'd be the first to come on this problem and want to put it all in one in a motor home.

  What I read, it could be a matter of dirty power of the inveter, but we thought we have purchase the best brand true sine wave, we could leave our guys of battery here in Australia.

  Any advice would be received with gratitude.

  Thanks Lou, first of all for your time and on the other hand for your thoughts and advice.

  We have it finally working outside a performance of the inverter with number.

  But I have to say without any worthy of official telephone hotline support of HP.

  Lou, I'm working through several of your suggestions, pending the official response to my survey on what brand or type of UPS or UPS I should use with my desire to tilt.

  Well, it is very sad that a massive company like HP with what you would think would be a very large R & D service, cannot answer a simple question, like what type of UPS or UPS if they recommend to work with the touchscreen of the tilt.

  The poor people, I was talking to, had no idea what I was talking about, or what I was trying to do. How a computer call center peason knows not what a UPS, I can understand on an inverter, but the tech people, these are things really very similar in the different boxes.

  OK, if you have this problem with your inverter and touch screen, first of all not all inverters are equal even in the same brand that I discovered. I want to thank my provider inverter & battery for their time and for allowing me to put in place the HP Envy of tilt on the back of their store and try different UPSs, inverters and batteries.

  I'll talk about brands here, not rat on the brand, but as it may be useful to someone else in Australia in the future. It seems that my "Epower DCAC 400w 12v true sine inverter" wasn't at the height when it came to clean AC power required to operate the touch screen without problem.

  In the end, we tried a "Epower DCAC 1000w true Sine Wave 12v', really just to give it a go, thinking it would be a better to be the same brand as the unit of 400w, well it worked quite OK

  This unit of true sine wave Epower 12 v 1000w, fixed our problem with touchscreen and ran HP Envy tilt as if it is running on AC power.

  If anyone is interested for camper here, I found this configuration to draw between 4 and 5 amperes of batteries of 12v and about 41 Watts @ runing 240 volts a you tube clip.

  Well it is my experiences and the final result, I hope this helps someone else in the future, I'm sure that HP will not be able to.

  Thank you all.

• screen reader problems

  When you open the Yahoo home page, we get a distorted display. At the top it says problems screen reader, with line click on "disable auto updated pages" I click on it and most of the time that it takes me to a good Yahoo home page screen. Problem though is that I have to do it every time. I have lost the ability to get a good Yahoo homepage screen and forced to work to do every time I open Yahoo.

  I'm not sharing my information or be shared I know.

  How can I fix this please?

  Yahoo questions, ask Yahoo Tech Support.

  Here: http://help.yahoo.com/l/us/yahoo/search/

  http://en.Wikipedia.org/wiki/Screen_reader

  A simple search help and Support produced this one.

  Internet Explorer features, such as multimedia or page transitions, can cause screen readers to give confusing or incorrect information. Follow the steps below to disable the features that might interfere with screen readers.

  To make Internet Explorer work better with screen readers

  1. Click to open Internet Explorer.

  2. Click Tools and then click Internet Options.

  3. Click the Advanced tab.

  4. Make one or more of the following changes:

     • Place the cursor to follow the development of the screen

       If you want your screen reader or your magnifying glass to use the cursor (also referred to as theinsertion point or system caret) to determine whether to read or expand, follow these steps:

       Under accessibility, select move the slider system according to focus/selection box.

     • The text to display in place of the images

       Under accessibility, select him always expand Alt text for images of the box. UnderMultimedia, clear the show picture check box.

     • Stop page transitions causing erratic behavior in your player screen or voice recognition

       Under browsing, clear the Enable page transitions you use smooth scrolling check boxes.

       Under multimedia, clear the show picture and game animations in the checkboxes of the Web pages.

     • Help prevent the sounds of the Web page to interfere with your screen reader.

       Under multimedia, clear sounds in webpages box.

  5. Click OK.

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• Question / problems with the TV Toshiba 40TL938 (40TL938F)

  Hello world
  I bought the Toshiba TV 40TL938 french version (40TL938F), in an online store.

  I have a few question / problem and I hope you could help me.
  -When I play subtitles embedded video MKV files via USB, works well, but for me, they are too small, too thin and too white. I can make them biger, more large and with a black shadow around him? If so, how could I do that?
  -When I play MKV via DLNA (with XBMC) video files, there are no subtitles more. Whose fault is this? My TV? XBMC? Do you think, how can I fix?
  -does anyone know if DTS will be supported sooner or later in 2012 toshiba TV models such as my 40TL938

  Thank you very much in advance for your help!
  Backslash
  French user of a beautiful Full HD 3D 40 inch toshiba LED TV :)

  > when I play subtitles embedded video MKV files via USB, works well, but for me, they are too small, too thin and too white. I can make them biger, more large and with a black shadow around him? If so, how could I do that?

  76 user manual page:
  http://www.Toshiba-OM.NET/LCD/PDF/English/TL938-4046-English.PDF
  You will need to check the option: + Subtitle + type

  > when I play MKV via DLNA (with XBMC) video files, there is no subtitles more. Whose fault is this? My TV? XBMC? Do you think, how can I fix?
  I guess this isn't taken in charge by using DLNA

  > does anyone know if DTS will be supported sooner or later in 2012 toshiba TV models such as my 40TL938
  I have found no information about the DTS :(

• Satellite C70 - A - 16 L - screen resolution problem

  Hello

  I recently had a screen resolution problem with my laptop (C70 - A - 16 L).
  The max screen resolution which is imparted to me is 1366 x 768, whereas before I think he used 1600 x 900.

  I tried the latest drivers, Bios, etc. and have also restored the operating system to a previous backup, as well as a new installation.
  I also tried to roll back to Windows 7 (with proper drivers). They all offer the same problem.

  This new maximum resolution display correctly - as if the LCD does not deal with the timings of 1366 x 768.
  I believe that the Panel is OK and the problem he reports the EDID information properly - to force windows to use the new resolution.

  Is there a download monitor.inf file that can be used to bypass the EDID reported by the Panel?

  Kind regards

  Antwist.

  If the right to display drver is usually installed everything should be OK.
  Have you installed Intel driver Toshiba download page 9.17.10.3062 version?

• blue screen "possible problem with SPCMDCON. SYS

  all about office went< only="" program="" available="" and="" showing="" is="" mcafee=""> bed blue screen "possible problem with SPCMDCON. SYS '.  Hard drive reads accurately but very little available. Get pop up of the AV PROTECTION ONLINE DECLARING PAY 59.95 AND we will solve the problem. also the problem States is due KEYLOGGER ZEUS, please help

  Hello

  1. are you able to boot to the desktop?

  If you are able to boot to the desktop, run the antivirus scan and then run the System File Checker.

  Step 1: First we will analyze the system for infections using the Microsoft Security Scanner which can be downloaded from the link below:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Step 2: Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  (a) open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (b) type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If you are not able to boot to the desktop, please start the system in safe mode and follow the steps mentioned above.

• Screen resolution problem. Cannot set above 680 x 480.

  Screen resolution problem

  I have a dell latitude d630 2.5 GHz computer laptop under XP Professional 64-bit operating system.  The screen resolution will not be set above 680 x 480, and when I try to increase the computer stops with a black screen message that don't stay long enough onscreen to read.  Dell advised that they don't or support this machine with the XP operating system and that they have no drivers or other fixes for the problem.  I hope that you will be able to help and thank you.

  Hi dduck11,

  ·         What is the default screen of the laptop resolution?

  You need to update the graphics (video) drivers for the laptop. I see that there are Windows XP drivers available for the same thing. Download and install the updated drivers to see if it helps.

  Drivers & downloads for Latitude D630

• Screen resolution problems (Windows 10)

  I downloaded the latest trial 9 Captivate for Windows 10 and screen resolution problems. Basically, making the software unusable. A lot of screens and dialog boxes seems larger than the current window, they are in, making the right and downstairs parts invisible window (usually, this is where the 'OK' and 'Cancel' buttons for example).

  I'm Captivate on a laptop running 64-bit Windows 10 (Sony Vaio with an NVidia GT 640 M map graphic with the latest drivers)

  Does anyone know how to fix this? Here are some examples:

  

  

  

  No retina.

  What is the size of the police on? Win10, it is often larger than 100%, which is not really necessary for your resolution, but that's a retina display. I am using Captivate on Win10, but Surface Pro and laptop have a retina display.

• Page of Yahoo mail that says 'there a screen resolution problem". A in case of problems with all stakeholders, even all the browsers. The question is Firefox!

  I have the latest version of Yahoo mail. When I click on the link "mail" of my Yahoo homepage, he directs me to a page that reads, "There is a problem of screen resolution". In the body of this page, it explains how to fix the problem. BUT, I don't have a problem with the resolution - the screen resolution should be 1024 x 600 or greater and IT IS! This only happens with YOUR browser. I have Chrome and IE, neither of which is a problem. I worked with a representative of the yahoo mail support and he explains that it IS a problem with Firefox and for raise you awareness and fix the problem - I use a Vista operating system on a computer and Windows 7 on my other computer, which has the same problem, so we KNOW for sure, it's a Firefox issue.

  I don't think that the effects of this question all those who use Firefox because I'm able to visit Yahoo Mail without any problems. I would say that to reset the zoom of the page on the page, this issue occurs on. You can do these steps go to view > Zoom > reset or press (Ctrl + 0 (zero).

• Windows 7 screen resolution problem

  To make the question as concise as possible, here's what I have.

  -VM with Windows 7 Enterprise, version 6.1

  -Vmware tools installed from ESX 4 upd 1 host

  -Latest installed Windows updates

  -Windows Device Manager shows no problems with any material

  -Display the Vmware SVGA 3D (Microsoft Corporation - WDDM) driver

  -

  ---

  List of valid modes revealed in favor up to 1280 X 1024 (32 bit), 85 Hz

  Problem is managed by using a console session maximum screen resolution is 1280 X 768, 85 Hz.  Definition of a higher resolution reveals a black screen that is not visible.  Is it possible to get a better screen resolution, or am I stuck?  I'm trying to get a PCoIP view works correctly and I think that this may be a contributing factor.  In other words, I am able to connect, but screen turns and stays black.

  By default the display protocol: PCoIP

  Allow users to override the default protocol: False

  Quality of Adobe Flash: do not control

  Adobe Flash limitation: disabled

  Thanks for any help you can provide.

  In my env, I got following problem:

  Check in your virtual machine video memory = 4 mb, if it is please check your Total RAM of VC/ESX management video video card, if it's something like 36.18 (it's what I had), change it to 32/64 (valid integer). Fixed my problem for XP and Win 7 VM.

  See you soon,.

  Andr3y

• After switching to Firefox I screen questioned on public networks. I think that I have granted access. How can I change this?

  Running Windows 7. Past from Internet Explorer to Firefox. A message screen came the next time I used Firefox questions on public networks. I think that I granted access to public networks, and I don't want that. How to change that?

  This sounds like a problem of Windows Firewall. To change this back it is possible to access this setting of the firewall.

  • Configure the firewall if Firefox can access Internet

• Satellite 1800-412/battery/screen? problem...

  Hello
  Sorry for the English, I will try to explain my prob
  I have a 1800-412 2 years old (out of warranty) and now big problems with the display when I'm working on it:
  Evry time I turn on the laptop, the screen flashes and nothing shows up except when I press the little button at the top right (this one is pulled down when I close the screen). Then the screen lights up for 5 or 10 seconds and new Moul. In fact, I can see the screen, but it seems that there is no brightness... It is very very bland out (?)...
  This problem seems to appear less often when I work only with battery full power, but is still there.
  I updated the bios 2-10 and updated display driver too.
  But nothing changes.
  Question: is this battery problem screen problem, bios issue...
  Thanks for the tips, I don't know what to do, and it is impossible to work now with this computer.
  someone has an idea of what I need to do?

  Thank you

  Hi frakk,.

  I think that there is a problem with the FL inverter connector pins. Take your distributor to service, they can fix.

  Good bye

• Satellite C870 - sound quality & Bluetooth connection problem

  C870 satellite.

  (1) problems with Bluetooth - machine could not find other peripheral and there were communications problems;

  (2) I am very, very disappointed by the quality of the sound. The speakers are very poor. If I had known I wouldn't n buy it! Unfortunately, I have not had a chance to check it out and assumed Toshiba will keep minimum standards in this area.
  In the past (a few years ago)

  I used PC Toshiba laptop and it was OK.
  To be honest, I bought for this calculated because of my good experience of the past, but will be more careful in the future.

  Now I have to life with her in the past 800US.
  The rest is OK - for now.

  > 1) issues with Bluetooth - machine could not find other devices and there are communication problems;

  What Satellite C870-xxx you have exactly?
  From my own experience, some models support BT and some don t so probably your device does support BT or you have done something wrong then that configuration of BT.

  (> 2) I am very, very disappointed by the quality of the sound. The speakers are very poor. If I had known I wouldn't n buy it! Unfortunately, I have not had a chance to check it out and assumed Toshiba will keep minimum standards in this area. In the past (a few years ago)

  My own different models of knowledge supports different hardware specifications. You can buy models of laptops with Harman-Kardon speakers that offer the best sound quality. This device seems to support standard speakers.
  So it s always a question of value for money and in my opinion it is not too bad.

• iMac 4 k (end of 2015) photoshop screen flashing problem/bug

  Hello

  I'm a Retoucher, so I use Adobe Photoshop to do my job.

  Recently, I bought a new iMac 21.5 (end of 2015) with the cool Retina display 4 k.

  Configuration:

  OS X El Capitan

  Version: 10.11.3 (15 d 21)

  iMac (retina 4K, 21.5 inches, end of 2015)

  Processor: 3.1 GHz Intel Core i5

  Memory: 8 GB 1867 MHz DDR3

  Graphics card: Intel Pro Iris Graphics 6200 1536 MB

  But the happiness was gone soon after the installation of Adobe Photoshop and trying to do my job. The fact is that I found a disgusting bug. My screen goes black / begins to blink/flicker (the video is here - https://youtu.be/D-5dF3dvYmM).

  First my thought was - maybe it's a problem with the combinations of keys or graphics tablet. Then I turned off the Tablet and checked the shortcut key settings and tried once more - the problem has not disappeared.

  Then I tried to repeat the bug. I realized that there are not any sequence of actions. Screen flickers randomly. But I noticed - fact screen to browse more often (when you use the tools brush or pad), pressing CMD, SPACE, the [] keys.

  The next step was Google. I found a lot of these questions:

  https://discussions.Apple.com/thread/7349449

  https://discussions.Apple.com/thread/7401844

  https://discussions.Apple.com/thread/7370586

  https://forums.Adobe.com/message/8289188

  https://forums.Adobe.com/message/8337985

  https://forums.Adobe.com/message/8353487

  https://forums.Adobe.com/message/8252309

  https://forums.Adobe.com/message/8392296

  https://forums.Adobe.com/message/8157454

  I have already tried:

  (1) different combinations of the parameters of the advanced graphic processor - nothing has changed

  (2) passing off the coast of the use of the GPU - nothing has changed

  (3) update to my OS x to the latest version - nothing has changed

  (4) update Adobe Photoshop to the latest version - nothing has changed

  (5) restore default settings PS - nothing has changed

  There is ONLY a SINGLE REALLY WORKING solution - https://www.youtube.com/watch?v=8aGJBafQWTg

  + Chris Hong Here is a very ugly solution - I realized that this issue only happens when my cursor for eraser size is too large. I just went into preferences > slider and make the precise cursor. He stopped the issue of flashing. Although it makes the little hard work on photoshop.

  
  

  It's really worked, but done PS is usless to me (and as I understood it too for many users of the new iMac 4K).

  I tried to make a comeback to the iMac, but my dealer Apple told me that it is software problem, so that they can't return to my iMac and get a refund.

  Dear Apple or Adobe,

  Please solve this terrible problem.

  I look forward to your response and resolution of my problem.

  Thank you.

  Yours faithfully,

  Alyona

  PS Sorry for my English.

  Hello

  I have the same problem with my iMac nine 4K, the latest version of the operating system and Photoshop was last updated.

  I've contacted Apple and Adobe, but Adobe has no answer for us, and Apple says it's a software problem, Adobe has to solve.

  The really unique solution for not having the flashing black screen is the one you posted, made a comment on a Youtube video: set the cursor as "accurate".

  I agree with your prayer: Please Adobe and Apple fix this bug!

  Tatiana

• Screen lock problem

  I have a 64 GB iPhone and last week, I updated to iOS iOS 8.xx 9.1. After the update, my phone slow sometimes and the screen has not moved even I scrolled across. The problem is, when you locked your phone with touch support, screen, it should be showed black white screen and locked instantly, but with my phone, sometimes when I blocked my phone, it shows the black white screen and then the background appear for a while and then the locked phone. Could someone help with this problem? Is this a bug or something?

  Could just be a bad copy of the iOS software. Save it to iTunes or iCloud, plug it into iTunes, restore as a NEW and test again. If the problem is resolved, then restore your backup, if the question comes up, the iOS and the phone is very good, it's probably something corrupt in your backup. But most of the time, a restore will solve your problem