Query expression (by adding an additional expression)

Similar Questions

• UCM query expression

  Hi all
  
  Following UCM query expression SELECT * from ora: t:IDC:GlobalProfile WHERE the ora: p:xTargetGroup = 'aa '.
  I know that xTargetGroup is a range of metadata to content University Complutense of MADRID, but I don't know what is a meaning of the ora: t:IDC:GlobalProfile and ora: p:?
  Whare I can learn about it?
  I learned from this http://download.oracle.com/docs/cd/E21764_01/ doc.1111 /e15813/toc.htm, but nothing clear.
  
  Thank you.

  I did a blogpost that explains this kind of queries: http://yonaweb.be/using_cmis_query_content_query_navigation_model

  The query is CMIS (content management interoperability services) standards following the standard default SQL for syntax.
  ORA: t:IDC:GlobalProfile is the document profile. University Complutense of MADRID, you can assign profiles to document if you do not need to see all the metadata. The GlobalProfile is the default profile containing all the metadata.
  ORA: p is the prefix for access to the metadata assigned to the profile.

  So, if you created a custom profile called Image that you can get all the images using the
  Select * from ora: t:IDC:Image where...

  Hope this is clear.

• in the query expression syntax error

  I get the following error message:
  
  Microsoft] [ODBC Microsoft Access driver] syntax error (missing operator) in query expression 'customerid_cus ='.
  
  for the following code:
  
  If IsEmpty (Request.Form("company_cus")) then
  
  rs_company. Source = "SELECT customerid_cus, company_cus FROM customers_cus WHERE customerid_cus =" & Request.QueryString ("customerid") & "". "
  
  On the other
  
  rs_company. "Source =" SELECT customerid_cus, company_cus FROM customers_cus WHERE company_cus = ' "& Request.Form ("company_cus") &" "'"
  
  End If
  
  What could be the problem?

  Are you sure that you pass the customerid querystring when the form
  company_cus is empty.

  --
  Paul Whitham
  Certified Professional Dreamweaver MX2004
  Adobe Community Expert - Dreamweaver

  Valleybiz Web design
  www.valleybiz.NET

  "aonefun" wrote in message
  News:epmf3n$f3u$1@forums. Macromedia.com...
  > I get the following error message:
  >
  [> Microsoft] [ODBC Microsoft Access driver] Syntax error (missing operator)
  > in
  > query expression 'customerid_cus ='.
  >
  > to the following code:
  >
  > If IsEmpty (Request.Form ("company_cus")) then
  >
  > rs_company. Source = "SELECT customerid_cus, company_cus FROM".
  > customers_cus
  "> WHERE customerid_cus =" & Request.QueryString ("customerid") & ""
  >
  > Other
  >
  > rs_company. Source = "SELECT customerid_cus, company_cus FROM".
  > customers_cus
  > WHERE company_cus = ' "& Request.Form ("company_cus") &" ' "
  >
  > End If
  >
  > What could be the problem?
  >

• My Windows Live Hotmail account has been hacked and they have added an additional email address to recover passwords for security.

  How can I delete an email without sending a confirmation to this account?  My hotmail account has been hacked and they have added an additional email address to recover passwords for security.  To remove the address, the only apparent is to send a confirmation email to the address I want to delete.  It is counterproductive.  I have a password, but if they can obtain the information via another email address, my account is never going to be safe.   I got this address for a long time and do not want to lose.  However, he begins to feel that my only option is to go with another provider.

  Thank you

  original title: remove email address

  After all the Hotmail issues in the appropriate forum found here:
  http://windowslivehelp.com/

• I have an idea on the program application Adobe InDesign to increase the power of sale of Adobe InDesign, by adding an additional menu, with an additional menu that I hear more important for the future of printing.  How can I report directly to the

  I have an idea on the program application Adobe InDesign to increase the power of sale of Adobe InDesign, by adding an additional menu, with an additional menu that I hear more important for the future of printing.

  How can I report directly to the developer indesingn adobe...!

  You can create a feature here request:

  Feature requests/bug reports

• lack of query expression

  Hi all
  
  Select "GRANT" | privilege | "ON" | OWNER | '.' || TABLE_NAME | of dba_tab_privs where the recipient like 'TEST % ';
  
  
  Why the slightest mistake orders above Missing expression... what I have to change?
  
  I wish that I shouldn't get mocking responses of the Senior Oracle DBA in this Forum.
  
  
  Thank you all
  
  
  Kai

  Use

  Select 'GRANT'. privilege | "ON" | OWNER | '.' || Table_name |';' from dba_tab_privs where the recipient like 'TEST % ';

  This will give you the output but I was thking, who is privileged to be given. That too add in this script

  Select 'GRANT'. privilege | "ON" | OWNER | '.' || Table_name |' to user_name;' from dba_tab_privs where the recipient like 'TEST % ';

  Anand

  Published by: Anand... on December 24, 2008 14:20

• PL/SQL Query return function, adding the column links

  Hi all
  
  I'm working on a SQL report with the area type = function from PL/SQL Query to return
  All columns are generated dynamically based on my mapping table and a column of ID.
  So whenever the page is loaded, according to the ID mapping table returns a set of columns in a particular order.
  So not only the columns are dynamic, but the order of the columns varies also.
  But the first 1 column is standard (it doesn't come from the mapping table) and is coded in my pl/sql block hard.
  
  I'm fighting with the addition of a link to this column. The link must be a Javascript function which takes the parameters in the form of 2 columns in the mapping table.
  My pl/sql block is something like that...

  v_select := 'SELECT <g href=javascript:f_report1(#map_id#,#comments#)><img src=""></a> as report1, ';  // g=a
  v_cols := 'contains all columns from the mapping table based on a ID(hidden item)';
  v_from := 'FROM table';
  v_where := 'where condition is put in here';
  v_query := v_select||v_from||v_where;
  return v_query;

  Now, I'm not able to transmit the values of this #map_id # and #comments # correctly. I tried so many different combinations of channels, but could not make it work.
  
  I'm not sure that the order of this map_id and commentscolumn and therefore cannot connect through the report attributes.
  How can I go to a column value to the function?
  
  
  
  Thank you
  Dippy

  This should work if all goes well:

  v_select := q'[ SELECT '' as chart, ]';
  

  Published by: Dimitri Gielis on May 20, 2010 20:10

• Adding an additional PLP1200

  Hello

  I use a pair of PLP1200 powerline adpaters to provide a decent connection for a superior room. If I buy a singular unit to another room can I plug the existing that is connected to the router and still have the original room attached, or do I need a pair?

  Thank you very much

  Steve

  Thanks for the replies everyone. My additional PLP1200 arrived last night, and after performing a reset on it has synchronized with my other PLP. Everything works as expected.

  See you soon

  Steve

• Adding an additional hard drive

  Have an emachine with windows vista upgrade, I put an extra GI on my PC to make 1.5 G. I want to add an additional hard drive. I now have a120GB hard drive. I have an another emachine with a 160 GB hard drive, but my problem is the 120 GB is 32 bit and the 160 GB is 64-bit. My question is that I can use the disk 160GB of hard drive without any problem, most 120 GB hard drive?

  The drive works perfectly.  Any hard drive can operate in 32-bit and 64-bit systems. Boulder computer Maven
  Most Microsoft Valuable Professional

• Adding an additional HARD drive to Dell Dimension 4600

  HARD drive how much can this system take, I ask because I want to add an additional hunting with taken all readers currently in PC (2). Any help would be appreciated. Regards.Johno65

  Hi John,.

  Thank you for your response.

  Dimension 4600 system board connectors are as follows:

  • Connector 40 pin primary IDE channel
  • Connector 40 pin IDE secondary channel
  • Floppy drive 34 pin
  • 7-pin Serial ATA connector (2)

  The Dimension 4600 supports up to 4 ATA/100 devices on 2 IDE channels. However, it has flanges/casing for two drives internally accessible only. If you do not connect a third drive internally, there is no place to fix in the system chassis (such as the hard drive bays can contain only 2 hard drives) so it could be hung out of the system. Alternatively, you can connect external USB hard drives as needed on the system.

  Answer please if you have other queries.

  Thank you and best regards.

  Babita S
  #iworkfordell
  Learn more about Dell Product Support, drivers & downloads, Order & Dispatch status -> Choose your region U.S. customers; Clients of the United Kingdom; Visitors to the India. For technical support Dell video clicking here.

• Adding an additional CASE to an existing deployment of NAC OOB 4.7.3

  Hi guys,.

  If I am to add the certificate self-produced my new cases to the authorities of my CAM list existing certificate approved, it just will be added or it will replace the existing trusted certificate?

  Hi Adrien,.

  "Certification authorities" are the certificate of all the CAs root and also self signed certs of the trusts of the CAM case. So whenever you add a root/selfsigned certificate to this list, it is added to the list and does not replace any of the CERT. This link gives more information:

  http://www.Cisco.com/en/us/docs/security/NAC/appliance/configuration_guide/45/CAs/s_admin.html#wp1092761

  Kind regards

  SOM

  PS: Please mark the same question if it has been answered. Note the useful messages. Thank you

• Adding an additional hard drive in a small factor dc7900

  I try many ways to install an additional hard drive but no luck, was installing 2 Sata and Sata 3 decision-making, but did not work, just like to know if it is possible to add an additional Sata hard drive to the PC, one of the factory (Original) is too small, I thank you in advance...

  Always learning, is never too late

  Not sure if you have the ultra thin or small form factor (if)... but I don't see why you shouldn't be able to add an additional hard drive. In fact, HP has even some videos of support on how to do...

  http://h20464.www2.HP.com/resultsCSR.htm?prodSeriesId=3785403&MEID=15DB20AC-BA4B-4E1A-A5FE-6CBED2052DF0

  If you have the data and power cable attached, the reader should appear under the general tab of the BIOS. You shouldn't have to do something with jumpers on the drive and it does not matter what sata connector you put it in.

  Is that the new bad drive? Install in another PC to see if it works...

• Adding an additional language

  Hi all

  Follow this doc: how to add A new language in R12 (Doc ID 1511692.1()

  So ADADMIN running:

  ATTENTION: All workers have failed or are pending:

  Failed: File ICXNLINS.sql worker 1.

  Failed: File AZNLINS.sql worker 2.

  Failed: File BNENLINS.sql worker 3.

  Failed: File FNDNLINS.sql worker 4.

  Failed: File ALRNLINS.sql worker 5.

  Failed: File AXNLINS.sql worker 6.

  Failed: File SHTNLINS.sql worker 7.

  Failed: File FANLINS.sql worker 8.

  Failed: File PERNLINS.sql worker 9.

  Failed: File EAMNLINS.sql worker 10.

  Failed: File PAYNLINS.sql worker 11.

  Failed: File FFNLINS.sql worker 12.

  Failed: File DTNLINS.sql worker 13.

  Failed: File FTENLINS.sql worker 14.

  Failed: File SSPNLINS.sql worker 15.

  any ideas?

  Thank you

  I added sessions SIMULTANEOUS increased in DB params and the success of the completed works.

• Multiply fields simple adding of additional calculations.

  I have 11 fields that are set to multiply to field one, the b field. It's a very basic calculation (Dropdowna, Sim1), (Dropdownb, SIM2) and so on. They calculate very well with the seizure data, but when data is modified or added to another part of the form, amounts are added to these very basic calculations as a new total somehow and they seem to continue to multiply, producing incorrect results. Any ideas? I have problems here with what should be a very simple task. Calculations are shown in the columns "Necessary Services" in the picture as an attachment. Thanks in advance!

  Rich Valentine

  

  It is not sensible. Whenever the computation takes place (this happens whenever any field in the file is changed), it will become exponentially larger.

  Your formula is basically: X = X * Y

  So if in a first time is 1/X and Y is 2 the result is 2, but then it will be 4 (2 * 2), 8 (4 * 2), 16 (8 * 2) etc.

  You cannot include the value of a field in its own calculation. It makes circular.

• Adding an additional drive

  So I currently have a script that has the followning variables

  $HDD1 = "20".
  $HDD2 = '0 '.

  Here's a snipit of my script code.  $HDD1 and $HDD2 add the VMDK based on the model that I use.  There may be a time when I need an additional drive, once again, that I may have need for two additional discs.

  If I didn't need $HDD2, I prefer to scratch as a way to define what is not in use.

  Now, if I run my script and put $HDD2 = 0 as shown above.  The successful full script and only adds $HDD1 as I hoped, but powercli it does not display errors related to 'invalid value passed to SizeGB' he doesn't like '0' for $HDD2

  I wonder if I should just add this to the line below pertianing to $HDD2?   -ErrorAction SilentlyContinue

  Or is there a better way to deal with this?

  Thank you!!!

  $vm | NumCpu ($cpu) - set-VM - confirm: $false
  $vm | New-harddisk - CapacityGB $HDD1
  $vm | New-harddisk - CapacityGB $HDD2
  $vm | Set-VM-Notes $Note - confirm: $false
  Start-VM - VM $vmname

  Nothing of a Where clause can not correct

  Get-Variable -Name HDD[2-6] | where {$_.Value -ne 0} | %{
    $vm | New-HardDisk -CapacityGB $_.Value}