Query related to the connection

Similar Questions

• Query related to the availability of WINDOWS 8 PRO DVD

  Original title: WINDOWS 8 PRO DVD

  When will I receive my backup DVD Pro Windows 8? It's been more than 2 weeks? Says their e-mail received October 31, 2012: your DVD is on its way Your Windows 8 Pro has been shipped. It should arrive in 4 to 8 days.

  Hello Sniper91,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it seems that you have problems with Windows 8 Pro DVD. As I understand it, you need to know when the Windows 8 Pro DVD will be available.

  Please contact sales and Support of Microsoft Store.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Site_Contact_Us

  Meet us if you face any problem of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Query related to the installation of hard drives

  Original title: hard drives
  I have two hard drives and I want to set up as
   
  1. a stand-alone hard disk that holds the operating system
  2. the second hard drive to keep the files like doc, files, photos, video, and downloads.
  How can I do this?
  Thanks in advance.

  It's just a matter of creating a partition on the 2nd HARD drive. Then you can use it for whatever you like.
  You can install programs, or just use it to store data.
  HARD drive with a speed lower than 7200 RPM are generally best left to the storage (Western Digital Black are
  7200 RPM. Their VelociRaptor is the record of 10 000 rpm).
  Software load a little slower and may run more slowly on the 5200 RPM HARD drive. Are the 'Greens' HDD
  usually about 5200 RPM.

  -If you run short on the HARD the OS disk space is a way to create more space
  move your music, photos and video to the other HARD disk records.

  A method to move the folders in your main user folder is to R / click the respective folder
  and go to Properties.
  Click the location , and then select the partition or folder on your HARD drive that you want to move
  This folder is a subfolder of.
  After data is transferred, it will be a new shortcut to this new location in libraries.

  -If you do not use the libraries you can simply move the data to a new folder on the other HARD drive
  (without using the 'rent' option) and pin a shortcut from the new folder to the
  Icon from the Windows Explorer in the taskbar.

  [If you also need information on how to set up partitions and otherwise manage the HDD-]
  The two HARD drives should show up in disk management. This is where you create or delete partitions on your
  HARD drives
  Go to control panel (or start menu) > administrative tools > computer management.
  Then click on disk management.
  -The HARD drive with the operating system will say - ( system, start...) Main partition). It could be either disk 0 or 1 depending on the port on which the HARD drive is connected to the motherboard.
  The other disk HARD would have "unallocated space" If no partition was made.
  If the disc already has data, then it must also propose in the Start Menu > computer and data
  should be accessible and ready for to add you more data.
  If the 2nd HARD drive has no data that you have just made a new Partition. With a drive of 80 GB HARD is a single partition
  generally the best option for the management of space.

  You can get more details on how to use the disk by typing disk management management in the
  Search box Start > Help and Support.
  
  .

• Query related to the availability of the Windows XP SP2 CD

  Original title: XP Pro problem

  Is it possible to get a cd of Service Pack 2 for Windows XP Pro?

  Hello MGoodwinXW,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, it seems that you are having problems with Windows XP SP2. As I understand it, you need to know whether or not the Windows XP SP2 CD is available.

  Unfortunately, there is no availability of the CD of Windows XP SP 2.

  Download and install Windows XP SP2 link and verification.

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=28

  Answer to us if you are having problems with Windows XP SP2 or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Query related to the keyboard

  Original title: 6.06.6000.16238

  Where can I find in question for my keyboard?

  Thank you.
  Giuanpadan
   
  Hi Giuanpadan,
   
  If you are looking for the driver for keyboard, here is a link to download:
  Wired keyboard 500 driver
  Select the version of the operating system from the menu drop down and download the driver.

• Query related to the availability of the date and time of the email replied to the original e-mail in Windows Mail

  Original title: when you replied to a message.

  In Outlook, there is a feature... When you open a message, then answer it... If you pull up to the original e-mail message, it tells you when you have replied to this message.  Is it possible to do this in Windows Mail?

  Hello

  Yes, data search and mail time returned to the original e-mail is available in Windows Mail.

  Hope this information helps.

• Query related to the laptop purchase date

  Original title: Windows 8, update problem 14.99

  I bought a laptop of Jarir Bookstore in Saudi Arabia, Riyadh. I remember that I bought it in June but I forgot the date and reception was lost. So is it possible to check the date of my purchase?

  Hello Adel G,.

  Thank you for the question!

  It is disheartening to know that have problems you with the laptop computer purchase date. As I understand it, you have lost the receipt for the laptop computer purchase date.

  I need to ask you some questions to help you best.

  1. you have Windows 7 or Windows 8 operating system installed on the computer?

  2 may I know why you need to know the date of purchase?

  Unfortunately, there is no way to verify the date of purchase according to the information stored on the computer. You must contact Jarir Bookstore in order to get information from purchase date.

  Answer to us if you have problems with Windows Update or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this informationm helps.

• Query related to the data type 'Date '.

  Hey experts,.
  
  If my only of the column has data type like 'Date '.
  
  It will be always retrun date in Date + time format... EX 02/07/2012 00:00:00
  
  If I simply select this column in table_name
  
  or is it depends on the setting of specific oracle?

  while selecting the dual display in differnet format, why?

  What tool do you use? It is not SQL * more? Is this TOAD or SQL Developer or...?
  Looks like something is the substitution of / reactivate your format.

• Frequent, intermittent loss of wireless connection. Seems to be related to the problems of intellectual property

  I have a problem with my connection wireless, but only from the House. The laptop connects immediately, but seems to systematically lose the connection even if the signal strength is excellent.  It seems that the IP is regularly lost during a connection and must constantly be renewed.

  I've been connected with wireless no problem in a cafeteria for the last two hours.  I am disconnected only when I'm at home.  Is it possible that this is related to security?
  Any help would be greatly appreciated.

  I checked the IP address configuration and received the following message is displayed:

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  C:\Documents and Settings\Winuser > ipconfig

  Windows IP configuration

  An internal error has occurred: a device attached to the system is not functioning.

  Contact the Services de Support technique Microsoft for assistance.

  Additional information: unknown media status code.

  C:\Documents and Settings\Winuser >
  I also run the network diagnostic tool and received the following notification:
  Maps network has NO
  [00000002] cisco Systems PCI wireless network
  Caption = [00000002] Cisco Systems PCI Wireless LAN adapt
  DatabasePath = %SystemRoot%\System32\drivers\etc
  Description = Intel(r) PRO/1000 MT connection Mobile - Packet Scheduler Miniport
  DHCPEnabled = TRUE
  DNSEnabledForWINSResolution = FALSE
  DNSHostName = IBM-CCD92CC0547
  DomainDNSRegistrationEnabled = FALSE
  FullDNSRegistrationEnabled = TRUE
  Index = 2
  IPConnectionMetric = 1
  IPEnabled = TRUE
  IPFilterSecurityEnabled = FALSE
  IPSecPermitIPProtocols = 0
  IPSecPermitTCPPorts = 0
  IPSecPermitUDPPorts = 0
  IPXEnabled = FALSE
  MACAddress = 00:11:25:47:81:6E
  ServiceName = PCX504
  SettingID = {4B4A6905-63A0-4E1F-BCB0-6346ACF583AB}
  TcpipNetbiosOptions = 0
  TcpWindowSize = 64512
  WINSEnableLMHostsLookup = TRUE
  [00000011] Intel PRO/1000 MT Mobile connection
  Caption = [00000011] connection Mobile of Intel (r) PRO/1000 MT
  DatabasePath = %SystemRoot%\System32\drivers\etc
  Description = Intel(r) PRO/1000 MT connection Mobile - Packet Scheduler Miniport
  DHCPEnabled = TRUE
  DHCPLeaseExpires = 18:31:30 09/30/2009
  DHCPLeaseObtained = 17:31:30 09/30/2009
  DNSEnabledForWINSResolution = FALSE
  DNSHostName = IBM-CCD92CC0547
  DomainDNSRegistrationEnabled = FALSE
  FullDNSRegistrationEnabled = TRUE
  Index = 11
  IPConnectionMetric = 1
  IPEnabled = TRUE
  IPFilterSecurityEnabled = FALSE
  IPSecPermitIPProtocols = 0
  IPSecPermitTCPPorts = 0
  IPSecPermitUDPPorts = 0
  IPXEnabled = FALSE
  MACAddress = 00:11:25:47:81:6E
  ServiceName = E1000
  SettingID = {8FD85EC6-0D7D-4F3F-B970-1DD968C12A1F}
  TcpipNetbiosOptions = 0
  TcpWindowSize = 64512
  WINSEnableLMHostsLookup = TRUE
  [00000013] Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter (FAILED)
  Caption = [00000013], Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter
  DatabasePath = %SystemRoot%\System32\drivers\etc
  DefaultIPGateway = 10.29.21.254(Same sous-réseau) (PAST)
  Ping 10.29.21.254 with 32 bytes of data:
  Reply from 10.29.21.254: bytes = 32 time = 8ms TTL = 8
  Reply from 10.29.21.254: bytes = 32 time = 6ms TTL = 6
  Reply from 10.29.21.254: bytes = 32 time = 6ms TTL = 6
  Reply from 10.29.21.254: bytes = 32 time = 2ms TTL = 2
  Ping statistics for 10.29.21.254:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss)
  Time approximate round trip in milli-seconds:
  Minimum = 2ms, Maximum = 8ms, average = 5ms
  Description = Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter - Packet Scheduler Miniport
  DHCPEnabled = TRUE
  DHCPLeaseExpires = 15:56:37 11/06/2009
  DHCPLeaseObtained = 14:56:37 11/06/2009
  DHCPServer = 1.1.1.1 (PAST)
  Ping 1.1.1.1 with 32 bytes of data:
  1.1.1.1 response: bytes = 32 time = 1ms TTL = 1
  1.1.1.1 response: bytes = 32 time = 3ms TTL = 3
  1.1.1.1 response: bytes = 32 time = 2ms TTL = 2
  1.1.1.1 response: bytes = 32 time = 2ms TTL = 2
  Ping statistics for 1.1.1.1:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss)
  Time approximate round trip in milli-seconds:
  Minimum = 1ms, Maximum = 3ms, average = 2ms
  DNSDomain = ahcguestnet.com
  DNSEnabledForWINSResolution = FALSE
  DNSHostName = IBM-CCD92CC0547
  DNSServerSearchOrder = 167.177.96.225 (FAILED)
  Ping 167.177.96.225 with 32 bytes of data:
  Request timed out.
  Request timed out.
  Request timed out.
  Request timed out.
  Ping statistics for 167.177.96.225:
  Packets: Sent = 4, received = 0, lost = 4 (100% loss)

  Hello

  Maybe this can help.

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Jack MVP-networking. EZLAN.NET

• How can I get my xp computer that relates to the time capsule hard airport to connect to the internet

  My time capsule airport works to my iMac and my Sony laptop win7.

  I also have a windows xp computer that needs to connect to the internet while the airport time capsule hard cable . However, that xp computer seems not to recognize that the capsule exists and cannot connect to the internet. Can someone help me do this work? I'm not fluent in technical aspects of networks and connections. On the Sony, I just had to select the wireless network and put the password and everything was good. With the XP, nothing but problems.

  Help?

  Can your computer XP connect to Internet from other networks or simply not yours? From the description of your problem, looks like a configuration issue with your Windows XP computer and NOT the airport Time Capsule.

  Note: You do now that Microsoft does support Windows XP and that she would run as a potential security risk, especially when accessing Internet with it?

  However, if you still wish to pursue this, you can try the following to help you get started. You can post to a forum of Microsoft support for troubleshooting of networking with Windows XP problems.

  Step 1. Check your network configuration.

  To check the settings of network configuration for the correct IP address information, you can do the following:

  • In the command prompt window, type ipconfig/alland then press ENTER.
  • The results of this command will display a list of IPv4 default gateway addresses (this should be your Time Capsule) and DNS settings for all of your network interfaces (Ethernet, wireless, etc.) By default, your IPv4 address should be something like: 10.0.1.n.; the default gateway address should be: 10.0.1.1. The DNS addresses must match what your ISP provides you.
  • If you get an IPv4 address that begins with 169.n.n.n, then go to step 2 below.

  Step 2. Try to repair the connection.
  Network connection repair feature to renew the IPv4 network connection setting to try to correct the configuration on your Windows XP device issues. To access repair network connection, follow these steps:

  • Click Start, click Control Panel, and then double-click network connections.
  • Right click on the connection that you want to repair and then click Repair. Repair function will perform a number of steps automatically to try to fix the poorly configured settings for your network connection.

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Question related to the execution of the query by using the links to the DB

  Hi all

  I have a source and target database. Both are 11.2.0.3.

  I have a query that is running on the source database and load data into the target database.

  I created synonyms in the target for all of the tables referenced in the query, remaining at the source.

  I run the query in the target using synonyms that I created. I see that the entire query became transferred to the source database and executed. The execution plan of the source was exactly the same as the way in which we could, if the query has been run directly there.

  No problems so far.

  Now, I have a database from different sources. Version 11.2.0.4.

  When I try to mimic the same behavior using this data source, the complete query will NOT be transferred to the source. He made on the source (remote site) full table scans, transfer of data to the target (local site) and then by performing sort operations & the index range scans (min/max) on the target.

  In both cases, all of the tables referenced in the query are accessible through the link in the DB.

  Please let me know if there is no setting of database / everything which could control how or where a query with all accessible by link DB tables are optimized and executed? Ideally, I want the entire query to be transferred to the remote and executed site.

  I can provide more details if necessary.

  Thanks in advance.

  Thank you sol.beach. Queries I tried both sources are in fact different. I failed to mention that.

  @John,

  We did recommend the creation of a view of the source, which is synonym on target and run the query. The client was not ready to create any object on the source system and so to test this workaround solution.

  ********************************************

  After some time, I realized that there is a hardcoded as SYSDATE column. Whenever I took it / I did as null, because the entire query is getting transferred to the source DB.

  "I changed 'SYSDATE column-name' to ' col_name (select SYSDATE from dual@remote_db_link). But this also seems to stop the query to be sent to the remote db as a whole.

  Try to work around this problem, but any ideas are much appreciated.

• App of Watch sounding abandons the connection to their iPhone app

  I used Smart sounding for about a year to control my hearing aid Linx2 with my iPhone and Apple Watch successfully. However, recently, the app shows interrupts the connection to the iPhone app. Hearing AIDS continue to work well with the iPhone, but they do not meet the application of the watch. Everyone knows about this problem? I reinstalled the apps and rebooted the on both devices. If! restart the watch, the app connects, but the connection is soon dropped. I don't know if the problem related to recent IOS upgrading or something else. Any thoughts on how to solve this problem will be appreciated. Thanks in advance!

  Have you tried devices pair the two UN - force to restart both of them and then re - pair again?

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Restart your Apple Watch - Apple Support

  Apple Apple Watch support - Setup & matching-

• No display via the connection HDMI Qosmio X 300-11 L

  Hello community,

  I have a problem with the connection between my laptop Qosmio X 300-11 l and my LCD TV Toshiba 32R3550P. If I connect
  my laptop computer Cup on TV he detected a Regza Link on the good Port HDMI and Toshiba laptop shows on the screen. If I turn on
  my laptop it starts successfully, but before the Windows login mask appears that the laptop screen goes black. FN + F5 does not work. If put the dial up on laptop on TV th
  computer laptop screen turns black as soon as I connect the HDMI cable into the port. FN + F5 does not work. What is the problem?

  I use the Nvidia driver 186.81 the Toshiba Homepage and I have a Windows 7 64 Bit OS.

  Could someone help me, please.

  Kind regards
  Stefan

  Hello

  I'm not sure if this could be useful without checking this Toshiba document:

  + Can not use 2 screens simultaneously on the Qosmio X 300 with SLI (PQX31E). +
  http://APS2.toshiba-tro.de/KB0/TSB9802OJ0000R01.htm

  It is recommended to change the power settings for the 'save energy.

  Usually, this solution is related to the use of both screens at the same time but it of certainly worth a try!

• Eternal HDD PX1266E - 1 25 retains the connection/disconnection

  I have an external HARD drive, type PX1266E - 1 25, that no longer seems to connect with my laptop.

  Until yesterday, everything worked fine, but then I started to hear the connect/disconnect sounds windows all the time (a first, later others and repeated all the 1-3 minutes approximately).

  They disappear when I remove the cable of the USB ports on my laptop HARD drive.

  If I look at computer Magement - Device Manager - Universal Serial Bus Controllers, I see that whenever I hear the sound connect, Device Manager refreshes and a new item "USB Mass Storage Device" appears between 4 'Intel (r) 82801 DB/DBM USB Universal Host Controllers"and 4 'root USB Hubs' already contained. When I hear the noise of the disconnection, the USB MSD disappears again.

  Following some comments I found on the web, I've uninstalled all the USB controllers and restarted, to clean, but that made no difference.
  If I right-click on the MSD line for the short period that it is visible and select uninstall, then reboot, my computer laptop actuall does not see the external hard drive (the balloons found new hardware USB 2.0 CD + HD and found new hardware USB Mass Storage Device appeared), but the drive is not really recognized (he normally stood like a G (: hard drive).
  Sometimes I get an error message as well after you have uninstalled the drive and when it is reviewed by the PC (a third balloon indicating that a problem occurred during hardware installation. Your new hardware might not work properly), but that only seems to happen if after uninstalling, I don't not yet restarted, but at the same time the HARD drive went through his routine to disconnect/connect again.

  Any suggestions on what I can do?

  Hello

  It of difficult to tell if it s really a laptop or drive HARD USB related issue s
  In your case, I would try to connect the HARD drive to another computer/laptop to check if the same thing would happen with an other other computers.
  This will help you know if his laptop or external HARD drive issue

  But to be honest, it seems that drive TOUGH question... maybe this disconnection messages balloon appears because the HARD drive stops working.