Question about archiving of projects

Similar Questions

• Question about reducing the project

  I work in 2D and 3D animation in sequels for a living, and we do simple animations. I hosted a clock like 400 million times and its been old, I wonder if there is a simple way to reduce the project, while having the attached illustrator files and find so I can just slide in the after effects project to an already animated clock. Is there a good way to do this? We just tried and he keeps asking for the locations of the illustrator files.

  I hope that my question is a bit clear

  Thank you

  Dylan

  This may take 2 steps: first, make a copy of the project file (for security) and highlight ONLY the compositions you need for the clock.  Use the command scale down the project.  You now only have the images necessary to the project.  Then, use the command consolidate Footage - which will allow you to put copies of the model and the images in a specified folder.

  You are finished.  Unless you are the AE CC 2015 - it was called wig on these orders.  If you are, that in 2014 CC AE or AE 2012.

• A fundamental question about archiving

  Versions: 10.2, 11.1, 11.2
  Platforms: Unix, Unix-like
  
  This isn't a specific question Dataguard. But I thought it would be the best response data experts warn.
  
  I have a DB in Archive log mode. It has 3 files redo log (file1, file2, File3)
  

  file1
  
   |----------------> file1 got full, LGWR starts writing to file2
   |
   V
  
  file2
  
   |----------------> file2 got full, LGWR starts writing to file3
   |
   V
  
  file3
   |----------------> file3 got full, LGWR starts the new cycle and starts writing to file1

  Journal of archiving of the file1 will be created as soon as LGWR began writing in File2 or only when the new cycle starts it IE. When the last rebuild (file 3 in the example above) of the group got full and LGWR begin in writing a file1?

  Journal of archiving of the file1 will be created as soon as LGWR began writing in File2 or only when the new cycle starts it IE. When the last rebuild (file 3 in the example above) of the group got full and LGWR begin in writing a file1?

  Hello

  What you say, correct, its a CYCLICAL once file3 archived then it goes again to a file1
  Here one more point, once the redo log file is full when it is archived , then only it will start writing in file2

  How Oracle database written in the Redo Log

  Log roll forward of a database consists of two or more redo log files. The database requires a minimum of two files in order to ensure that one is still available for writing, while the other is more archived (if the database is in ARCHIVELOG mode). For more information, see "Managing archived Redo Logs".

  LGWR writes redo logs in a circular fashion. When the current redo log file fills, LGWR begins writing in the redo log file available at the following address. When the last log file available redo is full, LGWR revisits the first restoration of progression and writes log file, starting the cycle again.  the circular writing redo log file. The numbers next to each line indicate the order in which LGWR writes into each redo log file.

  I mention only one link, here you can see the image how to rebuild cycling works.

  http://docs.Oracle.com/CD/B19306_01/server.102/b14231/onlineredo.htm#i1006187

  Thank you.

• If anyone can help with a question about burning my project to a folder or disk?

  I'm burning my project to create items in a folder after attempts to burn it to a dvd... He gets through the encoding then starts the burn and stops at 24%... It's at this location for over an hour... What is typical and I should keep waiting or is it frozen? How long a project of 3 minutes usually takes to burn?

  GinaG

  What version of Premiere Elements and on what operating system works - it?

  Do you receive an error message when ever the burn on?

  a. do you stop markers in the timeline of the project?

  If you work with Premiere elements 13

  a. update 13-13.1 using Help Menu/updates to date of an open project

  and

  b. look at the problem with and without the disabling Intel HD Graphics 2000 and superior preference in the preferences.

  Please see Edit Menu/preferences/general.

  Let us begin here and decide then what then founded on the details of your response.

  Thank you.

  RTA

• Questions about the parameters of database using a fast recovery area and the writing of two copies of archived redo logs.

  My databases are 11.2.0.3.7 Enterprise Edition. My OS is AIX 7.1.

  I am to convert databases to use individual zones of rapid recovery and have two questions about what values to assign to database settings related to archived redo logs. This example refers to a database.

  I read that if I specify

  Log_archive_dest_1 =' LOCATION = USE_DB_RECOVERY_FILE_DEST'

  the names of newspapers archived redo written in the default quick recovery area is '% t_%S_%r.dbf '.

  In the past my archived redo logs have been appointed based on the parameter

  log_archive_format='GPAIDT_archive_log_%t_%s_%r.arc'

  I think log_archive_format will be ignored for logs archived redo written in the fast recovery area.

  I am planning to write a second copy of the archived redo logs based on the parameter

  ALTER system set log_archive_dest_2 = ' LOCATION = / t07/admin/GPAIDT/arch.

  If I do this, the copy of logs placed in /t07 will be called '% t_%S_%r.dbf' or 'GPAIDT_archive_log_%t_%s_%r.arc '?

  Before my use of a fast recovery area, I used the OEM 12 c Console to specify settings of backup of database that has been deleted and archived redo logs after 1 backup. Oracle manuals say rather specify a deletion of "none" policy and allow Oracle delete newspapers in the area of fast recovery if necessary. Since I got to keep a second copy of these log files in /t07 should I keep the policy that says to delete logs after 1 backup? If I don't do that, how will they removed from /t07?

  Thank you

  Bill

  If I do this, the copy of logs placed in /t07 will be called '% t_%S_%r.dbf' or 'GPAIDT_archive_log_%t_%s_%r.arc '?

  They will be "GPAIDT_archive_log_%t_%s_%r.arc". LOG_ARCHIVE_FORMAT is only ignored for directories under OMF.

  Since I got to keep a second copy of these log files in /t07 should I keep the policy that says to delete logs after 1 backup? If I don't do that, how will they removed from /t07?

  You can hold the deletion policy as it is. Oracle documentation, defining the STRATEGY of the ARCHIVELOG DELETION: "the deletion of archived newspaper policy applies to logs archive destinations, including the area of fast recovery."

• Question about support for LabVIEW DLLS and Unicode

  Hello

  I have a question about LabVIEW and DLL functions calls.

  I use a DLL (sorry, I can't share it) that was written in C. It was written to support Unicode and non-Unicode function calls.

  The Unicode function is valid, then FunctionNameW is called if FunctionNameA is called.

  I am building a few VI to access the library. I have the regular functions of FunctionNameA work.

  My question is, does LabVIEW support versions of function FunctionNameW Unicode, and if so is it necessary Although LabVIEW is already working with the standard function call?

  Am I being redundant or what should I build in Unicode support?

  The first time I tried to test the Unicode functions, I had an error, and I guess this is a system setting.

  Thank you for your time in advance.

  DB_IQ wrote:

  I don't think I have TO implement the Unicode, but I want if I can.

  For what I do, I think almost it is not serious. But I wanted to know if it could be used.

  The short answer is "Yes, you can do it."  However, it may open a new Pandora's box.  If you're not careful, problems and complications that can still spread to other projects that are not using Unicode!  It is better not to summon this monster unless there is absolutely no other way to do the job.

• Question about importing video footage in Premiere Pro

  I'm new to Premiere Pro and have a question about it. I need to move all my videos on my new computer (Windows) from my old computer (iMac running iMovie). Where should I store my images so I can access inside Premiere Pro? I just need to store everything on a hard drive, and then create inside Premiere Pro projects when I need to import images in, or should I create a 'library' to store all my movies in? Setup bridge would be another beneficial way to view my videos (I use Lightroom for my photo library)? I'm just trying to discern the way I need to store and organize everything in order to get started with Premiere Pro. Thank you!

  Premiere Pro has no capability of database for the media in general, only in a specific project. 'Import' is not like in Lightroom, it does in PrPro is tell her where to look for the media while working on this specific project.

  So... you need create your materials on a particular disc, presented in a way that you can find them in a folder structure you design.

  A typical use of PrPro spreads parts on several disks. OS/programs on the system drive, a disk each cache PrPro & cache of database files; preview files; and project files. Media probably on another drive and exports on a final drive.

  Access the disk cache & cache database files, preview files and project files are the two ways of reading & writing, in addition to being constant. Multimedia files are used unalterable and exports only Scripture, their connections can be a little less robust.

• Hello, I have a question about yet.

  So I have a question about yet, I have a summer Member creative cloud for almost a year now I have just completed a project on first Pro CC and I'm ready to burn to a dvd. I guess I need more and who do not settle when I downloaded Premiere Pro off creative cloud. So, how to fix this problem? Any help would be greatly appreciated,

  Thank you.

  Hi Scott,.

  Please see CS6 still not installed with creative cloud

  Kind regards

  Sheena

• Question about subjects, books and tables of contents

  I have a question about the subjects, books and tocs. I have a project that someone else created, and my task is to create a new topic and add it to the table of contents. I created the topic, but when I generate CHM project it does not appear in the table of contents. I tried to update the table of contents. What I think (I guess) could be the problem, is the 'links to the topics', when I see the links to the topics in other areas (old) they seem to have a link to the main book, but the new one is not mine. Could you help me? Thank you!!!

  It seems that you have a manual table of contents page, rather than using the table of contents of CHM.

  The toc.htm topic that you see in your list of topics is probably where you will need to add your new topic.

  If the table of contents was already populated when you inherited the project, I suspect the previous author was using it just to keep track of the topics they had added manually to the topic toc.htm - added the CHM topic in summary you did mark the column of the table of contents in the list of topics like '' Yes. '' then add to the toc.htm manual is not. Hope that makes sense.

  P.S. Just guess that it is installing what I can see in the screenshot. It is quite unusual, so I hope I'm right.

• Questions about migration on server 1 for win 7 PC temporarily

  Hello, I am charged with moving that customers 2 of our current of 2 to VMware host separate Windows 7 64-bit PCs TEMPORARILY so that I can install for free ESXi 5.1 as the new host (replacing the current host, which is a Standard operating system Windows Server 2003 on a server Dell Poweredge 2950 using VMware Server 1.0.10).  After the ESXi installation on the server, I intend to spend both clients as they exist now to the new ESXi host.

  I have a few questions about this project, and I hope I can pull your knowledge to help me.  My question is:

  (1) is this a feasible plan?

  (2) what methods would you recommend using?

  (3) should what tools I use?

  (4) can what version of VMware (free) I use on the 2 Windows 7 workstations to serve temporary guest?  A customer is our Standard Windows 2003 domain controller, and the 2nd is an email server and Linux-based web.  I intended to put each on a separate office.

  Any help you offer is greatly appreciated!

  Thank you

  D. Pichard

  You can use vmware player as a free virtual machine player.

  Use vmware converter to convert your servers.

  Is not recommneded for convert DCs however, what you might do, it is to build a new one. However, it is possible.

  the dell 2950: your host in the HCL as compatible uses 5.x

• a few questions about the migration of content/web content

  Hi all
  
  
  I have a few questions about the migration of the website and content (from development to test) which are not specified after reading the oracle documentation.
  
  -> When we make the site replication will be migrated content (data files).
  
  -> when we move will contained all the ED and RD etc (any object type web site migrated).
  
  --> are the two the necessary step for migration when we migrate web site.
  
  
  Thank you
  
  -Yves

  --> When we make the site replication of the content will be migrated (data files).

  It depends on how you do it. The tool 'Site Studio Replicator' won't move any content, only the structure of the site. The 'Manage replication Site' page can be used to migrate content with the structure of the site but I do not recommend for large sites, I use separate tasks to archive to move the content. "Backup and restore" page stores the entire site in a ZIP file, not advisable for large sites.

  --> When migrate us content will be all ED and RD etc (any object type web site migrated).

  Yes. It uses the metadata xWebsites field to identify the elements that belong to the site.

  --> are the two the necessary step for migration when we migrate web site.

  Depends on how you do it, but yes, all bits are needed.

• A few questions about the colors of Patone

  I have a few questions about patone color since it is the first time that I use. I want to use them to create a paper letterhead and business cards in two colors.

  1)

  I don't understand that no sex is more than coated patone washed out colors. I heard that it's because the way paper absorbs the inkt. That is why the same results inkt in different colors on different papers (right?). My question is why is the patone black no sex so different than black normal (c = 0 m = 0 y = 0, k = 100) or black intense:

  

  When I print a normal document with cmyk, I can get pretty dark black color. How is it that I can't have this dark with patone color black color? Even text documents printed on a cheap printer can get a darker color than the color of Patone. He looks way too grey for me.

  (2) a first model, I want to print of patone in CMYK color (since I have like 10 different colors on a page of quick comparison). I know these CMYK colors distinguish the colors of patone and I can't get a representation of 100%. But is there a way to convert patone CMYK values?

  I hope some of you can help me with my questions.

  Thank you.

  You can get shades CMYK Pantone in Illustrator, (Swatches Panel > Open Swatch Library > color books > + PANTONE Color Bridge Coated or lying) but in my opinion, what's the point?  If you print to a digital printer, just use RGB (HSB) or CMYK. Personally, I never use CMYK called "equivalents." from Pantone

  Pantone colors are all mixed pigmented inks, which are fluorescent beyond the limits of the range of RGB and CMYK in particular. The original Pantone Matching System (PMS) was created for the printing industry. He described formulations of ink pigmented for each of its colors.

  Most digital printers (laser or inkjet) use CMYK. The range of CMYK is MUCH SMALLER than many mixed inks, printed on papers either paved or unpaved can deliver. When you specify no sex Pantone ink in artificial intelligence, according to Pantone conversion tables, HAVE "about" what will look like this color on a sheet no bed, try using CMYK. -In my opinion, this has little relevance to the real world conditions and should be avoided in most situations.

  If your project must be printed on a press printing with Pantone inks spots, then by all means, use Pantone colors. But don't trust the colors of the screen; rather get a Pantone swatch book and watch real inks on paper lying and uncoated, depending on the stock you will use on the press.

  With printing decreases rapidly for inkjet and web printers, Pantone has attempted to expand its relevance beyond the traction-date of publication (in the books and software alliances, with one such as Adobe) his old PMS inks and their supposed equivalent LAB and CMYK. I say "supposed" because even once, monitors RGB and CMYK inks can never be literally equivalent to many Pantone inks. But if you go to your project on a printing press printing, Pantone inks are still very relevant as of the "tones".

  I also put my preferences I > appearance of black both display all blacks accurately and output all blacks accurately. The only exception to this may be when you print on a digital printer, where there should be no problem checking.

  Rich black in artificial intelligence is a phenomenon of the screen, at least in the Prefs > appearance of Black, you specify also "out all inks like Rich Black"-something I'd do it EVER do so out for a real printing press. Still, I put my black people in artificial intelligence at the "output All Blacks Acurately" during a press release. If you fail to do so, then the press you will see any minor issue registration, with C, M and look at the back, especially around black characters.  UGH!

  Good luck!  :+)

• Questions about the installation of ColdFusion 9.0.2 version of existing in version 9.0.1

  Hello

  I'm currently running ColdFusion 9.0.1 enterprise edition and plan to upgrade to version 9.0.2 version. I understand that this requires uninstalling existing 9.0.1 and perform a new installation of version 9.0.2 version. My concerns are below:

  1. for the installation of the 9.0.2 version the 9.0.2 installer (demo / trial version) must be downloaded and the existing serial number (used in version 9.0.1) can be given during installation to convert it in fully registered mode - please correct me if my interpretation is incorrect here. My question is will the existing serial key (as shown in the page Admin of CF 9.0.1 version version) work with the 9.0.2 version as well?

  2. There are many features that are present in the current 9.0.1 version - for example the sources of data configured in the Admin see Y page there a way I can save these configurations of the existing version and to migrate settings to the new 9.0.2 install, or what I have to do the entire configuration manually after the installation of new? Data sources is something I can think; What other configurations can I save, if such a provision is available?

  3. in the installation of the 9.0.2 version there is a question about "configure the Web server for CF Connector" allows me to add Web/sites Internet servers during installation. If I select "built-in Web server" as the option (so do not configure any Web-site Web server), can I change this and configure Server/site later, after compeleting installation?

  What would be the things I need to be careful during this installation to version 9.0.2 from 9.0.1?

  Thank you!

  Arun-

  I did a successful version 9.0.2; installation answering my own questions, for the benefit of future development-

  1. Yes. Only the serial number is required (as shown in the Page of the CF Admin of existing facility)

  2 configurations (for example: data sources) can be exported. Go to CF Admin Page, click on packaging & deployment, click on Archives of CF. Basically, you export settings as files with the extension archive. car. Once exported from the current installation, it can be imported by clicking on the button deploying car file.

  3 server configuration can be modified (Add/Remove) by using the "Web Server Configuration Tool" which is installed by default with CF 9. You can find it under program files (windows OS).

  I had some problems during the installation. After installation, the CF Admin page would not be made. Virtually no cfm page don't take charge, because the extension is not known by the IIS (or the server you are using). To set this up, use the "Web Server Config Tool" mentioned above. This launch and activate the check box that is on the rendering cfm pages (forgot the exact name). Once this is done, cfm pages must load. I had to enable this and then do a reinstall but.

  -arun

• A few questions about integration between POET and EBS

  Hi you
  I am a new bie BIEE. In those days, have a look at the POET architecture and BIEE components. In the next project, there is some work on the development of POET based on request of the EBS. I have a few questions about integration:
  
  (1) generally, the POET application and database server is decentralized with application and database EBS? Both BIEE 10g and 11g version can be integrated with EBS R12?
  
  (2) in the POET administration tool, the first step is to create arrays of physics. If the source application is EBS, is it still necessary to create the physical tables?
  
  (3) if the physical creation of tables is needed, how to transfer data from the source of BSE BIEE physical tables tables? What ETL tool is preferred for most of developers? generator for warehouse or Oracle data integration?
  
  (4) during the data transfer phase, there are many many large data to transfer, how to keep the entire? for example, it must transfer 1 million lines of source to physical tables BIEE database, when 50% is completed, users try to open the POET report, they can see the new data of 50% on the reports? is there some transaction in phase control ETL?
  
  could someone give some pointers for me? I am very appreciated if you can also provide any other information.
  
  Thanks in advance.

  (1) generally, the POET application and database server is decentralized with application and database EBS? Both BIEE 10g and 11g version can be integrated with EBS R12?

  You shud look at OBI request here that uses OBIEE as a tool for reporting with pre-built modules. 10g & 11g comes with different versions of the applications of BI that supports sources such as Siebel CRM, EBS, Peoplesoft, JD Edwards, etc...

  (2) in the POET administration tool, the first step is to create arrays of physics. If the source application is EBS, is it still necessary to create the physical tables?

  His independent of any source. It comes to OBIEE modeling to create the RPD with all the layers. If you build from scratch, then you will need to create all layers else if BI Apps is used so you can get pre-built RPD and other pre-designed components.

  (3) if the physical creation of tables is needed, how to transfer data from the source of BSE BIEE physical tables tables? What ETL tool is preferred for most of developers? generator for warehouse or Oracle data integration?

  BI apps comes with ETL pre-built mapping to use with the tools majorly with Informatica. Only applications BI 7.9.5.2 comes with ODI, but oracle has the intention of having only ODI for any other versions.

  (4) during the data transfer phase, there are many many large data to transfer, how to keep the entire? for example, it must transfer 1 million lines of source to physical tables BIEE database, when 50% is completed, users try to open the POET report, they can see the new data of 50% on the reports? is there some transaction in phase control ETL?

  User will see still old data because its good enable Cache and serving it after each load.

  See http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html...
  and a lot more docs on google

  Hope this helps

• I have a simple question about the meta-data.

  Hello. It is a simple question about the meta-data. How can I get the video bitrate of a flv or mp4 (video playing via NetStream file) file

  right now I have this:

  Code
  var netClient:Object = new Object(); netClient.onMetaData = function(meta:Object) { for (var in meta props) {} trace (props + ":" + meta [props]); } MovieClip (root) .durations = meta.duration; trace (MovieClip (root) .durations); }; NS.client = netClient;

  And my output is:

  videocodecid: avc1
  audiocodecid: m4as
  aacaot: 2
  Width: 960
  AudioChannels: 2
  videoframerate: 23.976
  TrackInfo: [object Object], [object Object]
  moovposition: 32
  avcprofile: 77
  audiosamplerate: 48000
  avclevel: 31
  seekpoints: [object Object], [object Object], [object Object], [object Object]
  height: 540
  Duration: 221.312

  As you can see, there is nothing of video bitrate.

  I know that the video bitrate of my videos, but then I have to manually type each number of bitrate into my flash project, and it would be such a fuss when I have a lot of videos. Would be nice if flash can detect the video bitrate.

  It's for my online portfolio.

  Why you divide by 8?  If you want to convert bytes into bits, multiply by 8.