Questions about migration on server 1 for win 7 PC temporarily

Similar Questions

• Question about hosting a SERVER BUKKIT

  Original title:

  Minecraft

  I heard recently that MICROSOFT bought MOJANG so I have a question about minecraft

  I am an a BUKKIT SERVER hosting and I can not get money on the server I can not make/ender_man_killer 9999999 cause he said I have enough, BUT I'm the owner of pay

  No idea. All that I know is, I read there were some concerns of servers BUKKIT peacekeeping under the

  new regime. Can't imagine MS will prevent them, but...

  It is only a community forum. It is doubtful that anyone with responsibilities to the monopoly$ oft running Minecraft servers will see your message, so unless a member of the forum, which has been involved in Minecraft, and BUKKIT servers comes, you'd probably better on a forum dedicated to Minecraft.

  Or, maybe the bukkit below - forum

  http://bukkit.org/

  .

• Question about the compatibility of the drivers Win XP for Satellite L40 - 12 K PSL4E

  When you try to change my laptop from Vista to XP I don't find the drivers.

  However I found the driver for the same model, but PSL48, 49, 4B and 4 c. Could someone confirm that these drivers also work with my laptop PSL4E? Thank you/rgds. Sonia

  In general, you can install these drivers, BUT you should also check the chip chart and other devices like for example the wireless network card.
  Many laptops are equipped with different graphic chip or other card WLan so in this case you should pay attention to these differences.

• Satellite L305-S5920: Question about PC card, new use HDD & Win XP

  I recently bought this machine in the mail and on arrival was disappointed to see that it is not equipped with a Firewire plug - I thought that all the machines which had today? Too bad, I thought I'd use my PCMCIA Firewire card. But then I found that what looks like a standard PCMCIA socket has a block to halfway down on one side which prevents a normal PCMCIA card being inserted. Snookered. What is this decision? Not one of my PC cards will go in.

  I then tried, had always been my intention to replace the 160 gb HD with a new 500 GB it and install XP on it. It's a very long story, but it culminates at Toshiba telling me that "this model will not work XP. Someone at - it ideas how to get around this problem?

  Either way, I don't seem to have all the means to re-establish a new HD Vista if/when this one fails. Am I expected to go out and buy, or I missed something? There is no "recovery partition" on the hard drive so there is no way that I can produce my own recovery disk.

  I then tried to play a DVD, to be told that it was the wrong region and could not be played. Quite absurd to place this restriction on laptops - I live in two Americas and Britain - but once again so much worse, I'll just load AnyDVD and continue nevertheless. But no - the carpet * a drive mounted by Toshiba is one of the few that cannot be decrypted.

  Therefore this machine, which works well in its own design constraints, is nowhere near what I wanted and expected it to be. Can someone suggest a solution to all of the above questions? Because I already ordered a different brand which according to me does not have these limits, but it would be useful to keep this as a spare if I can fix it.

  Hello

  First of all, I doubt that there is some design flaws
  Akuma has already said, there are devices that supports different standards.

  In any case, for the first I recommend that you check this Toshiba page we:

  [Satellite L305-S5920 - details-| http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2241928& rpn = PSLB8U & modelFilter = L305-S5920 & SelCategorie = 3 & selFamily = 1073768663]

  You will find here all the details on this model Sat L305
  In the detailed specifications, you can find the info that this laptop uses the Express Card slot (ExpressCard/34 and ExpressCard/54). You must use Express cards instead of PCMCIA cards!

  You can also install the Win XP I n know not why, someone said that you can not do this strange however, you can install the Win XP and I found XP drivers too! Please visit US!

  The recovery of HARD drive partition is placed on European models of Toshiba. I put t know how it works on Toshiba WE series (perhaps drive HARD recovery is not available on laptops in the United States), but perhaps you need to create the first recovery disk in order to recover the laptop to factory settings.

  Greetings
  Jimi

• Questions about payment, cancellation, and planning for your review of VCA - VTC

  Fellow VCA (midshipman).

  I'm ready to go for my review of VCA - VTC, but I was interested in how you can pay for the exam and how much it costs. The last question, I think I found the answer to and $95, which is about €70? So, I registered for the exam with the assumption that I had to abandon in payment details before I confirmed. Unfortunately, I was already permanently registered after the first screen, I had to fill in and got an email sending me on the Pearson VIEW site. So I'm rather perplexed how me or maybe my employer can I pay for this review, if I can actually cancel it and if it is mandatory for me now to pass this review, now that I am registered of course for her.

  Kind regards

  Chris

  What you have said, I guess that the first site you visited was vmware.com and you completed the licensing process for the review.

  This operation generates an ID for you on VMware and PearsonVUE systems then this means that you can program review and pay via PearsonVUE.

  I don't think at this stage there is no obligation to actually go ahead and take the exam.

• A few questions about the sketch in Photoshop for iPad

  Hello

  I think to buy an iPad to use Photoshop sketch, since its compatible later with Photoshop on my desktop, but I have some questions that I hope someone here will know

  (1) do we have layers? If so, there is a maximum number that we can add?
  (2) we have the maximum number of disguise? (Canvas size)
  (3) can use us the color picker?

  I was thinking about surface 3 pro, but good it will be very expensive, so I came to this alternative! My goal is to shoot my Tablet and then if I want to be able to finish on my computer, but I have the basic features of Photoshop on my iPad. Thank you very much for your answers.

  Tiago

  Hi Tiago!

  the current short answer

  (1) No, sketch has no layer. Draw which is a similar application has layers. The two send to photoshop

  (2) to outline the size of the canvas are the dimensions in pixels of the iPad (2048 x 1536) when you make a shipment to Photoshop

  (3) Yes it is possible

  my penny. Download the two: draw the sketch to Photoshop, Illustrator. In: Photoshop, combine, and brush. You will use all the

• Migration sql server 2000 for oracle 9i

  Hello
  
  I migrate from sql server 2000 to oracle 9i
  
  When I capture Microsoft Sql Server, it gives an error
  oracle.dbtools.metadata.persistence.PersistenceException: ORA-04098: trigger ' MIGRATION. MD_PROJECTS_TRG' is invalid and does not re-validation
  I try again and it starts but it's not to stop until clicking on cancel or close
  
  What's the harm?
  
  Thank you

  Hello
  You hit a known issue using a repository created in 9.2.
  To show that this is the case do the following-

  SQL > alter trigger compilation MD_PROJECTS_TRG.

  WARNING: Trigger modified with compilation errors.

  SQL > show errors
  Errors for MD_PROJECTS_TRG TRIGGER:

  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  3/9 PL/SQL: statement ignored
  3/20 PLS-00905: object MIGREP. MD_META is not valid

  Compilation md_meta-

  SQL > alter compilation package md_meta;

  WARNING: The package has been modified with compilation errors.

  SQL > show errors
  PACKAGE MD_META for errors:

  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  0/0 PLS-00908: the stored format of MD_META is not supported by this
  Release

  21/4 PLS-00114: identifier 'PUTBAIFZKA3IHSJ5AC4ZXWYAWG41KN' too long
  21/4 PLS-00707: construction not taken in charge or internal error [2702]
  SQL >
  ==

  If you get this, so the only alternative is to create the SQL * Developer repository in a database of 10.2.

  Kind regards
  Mike

• Re: Question about the CD/DVD player for Portege M400

  I have a Portege M100 - and the CD-ROM drive does not work.

  Whenever I put a disc in I can just hear the motor turn the disc, but the computer is not picking up the drive. Device Manager picks up flawless.

  It doesn't seem to be any firmware for this sorting (or am I wrong).

  I've seen a DVD player for a M400 on ebay and I was wondering if that would take on my M100.

  Before buying it, I was wondering if anyone knew if it would be compatible. It seems to be OK size wise, but I was wondering if my Portege M100 XP would be able to use it.

  The description for the drive I want to put in the M100 is below:

  Thank you very much for your time. :)

  Description

  DVD +/-RW drive for laptop Toshiba Ultra Slim Bay Portege M400, S100 & Tecra S3

  Compatible models:
  Portege M400, Portege M405, Portege S100-S113, Portege S100-S1132, Portege S100-S213, Portege S105-S1133, Tecra S3,

  The Toshiba Ultra Slim SelectBay DVD SuperMulti Drive is a DVD burner that combines all the functions of a DVD player, DVD recorder, CD burner, and CD player in an ultra slim and ultra light. It gives instant access to CDs and DVDs and fits perfectly into your slot to drive Ultra Slim SelectBay of your Toshiba Portege M400, computer laptop M405, S100 or Tecra S3. It is the ultimate portable storage for mobile users.

  Drive ultra slim and ultra light, fits perfectly in your Ultra Slim SelectBay of your PC drive slot, no additional unit to take on the road
  Dresser based on multiple drive in a compact design: DVD-RAM, DVD + RW, DVD + R, DVD - RW, DVD-R, DVD-ROM, CD, CD/R and CD
  Productivity:
  Backup of important files
  Easy access to CD and DVD based media
  Use for multimedia presentations
  Adapts to your lifestyle:
  Watch your favorite DVD movies
  Play music and games
  Create your own DVDs or music playlist
  Create CDs or DVs with ease
  Transfer data seamlessly between two discs, improve your productivity
  Reduce the time spent to transport and save files
  Slide-in simple, plug-and-play operation
  Includes drag ' n Drop CD + DVD3/B CLiP, Win DVD Creater 2 and the DVD-RAM driver
  Compatible with computer laptop Toshiba Portege M400, M405, S100 and Tecra S3

  Specifications

  Speed (Max):
  Read: 24 x CD-ROM, DVD-ROM 8 x
  Write: CD - R 24 x, CD - RW 4 x, 10 x HS CD - RW, 10 x US CD - RW, 2 x DVD-R, 2 x DVD - RW, DVD + R 2.4 x 2.4 x DVD + RW, DVD-RAM 2 x
  Compatibility: CD-ROM (read), CD-R(read/write), DVD - ROM (read), CD-RW(read/re-write), DVD-R(read/write), DVD-RAM(read/re-write), DVD-RW(read/re-write), DVD + R(read/write), DVD + RW(read/re-write)
  Dimensions and weight: 5 "x 5.5" x 0.4 ". 3.9 oz

  Hello

  According to the paper manuals s user for Portege M100 two drivers of optical discs are compatible with your Portege M100L:
  TOSHIBA SD-C2612
  TEAC DW-224TH

  So if you want to have good player get one of them.

• Question about Windows XP CD home for Satellite A105

  I have an A105 Satellite and recently it started running very slowly. With most of my machines I would wipe and rebuild them (all my data is backed up) but I don't have a CD Windows XP Home (it didn't is come with the laptop such as Windows has been pre-loaded - I think that this is the norm?).

  Is there a way to create the CD of the laptop or can I apply for a Toshiba?

  Thank you

  Steve

  Hello Steve

  Laptop computers are generally preloaded with the settings and also delivered with recovery media. Maybe in your country you can get laptop cheaper without the recovery CD. I don't know about you.

  What you can do is contact the partner of service allowed in your country and ask if they can order one for you. I'm sure that it should be possible.

• Question about the extension of RAM for Satellite A50-522

  Hello

  I have a Satellite A50-522, with a Pentium M 715 @1. 5 Ghz processor and Intel 855GME chipset. To expand its RAM I referred to the Spain/Toshiba support website and I bought the PA3313U-2M1G (1 GB SDRAM 166 MHz DDR333/PC2700) via amazon.com. It turns out that this RAM is for "Alviso chipsets" - which are those relating to the Intel Centrino processors with 9xx series express chipset. I called Toshiba/USA and they recommend the PA3313U-1M1G or its equivalent Kingston KTT3311 / 1 G (since it is impossible to find in the Mexico), instead of the one I already bought. They all seem exactly the same thing in their description, except for the note "alviso chipset.

  My questions are:
  (a) is the chipset of this computer, considered "alviso" type? and
  (b) if not, should I keep the RAM I bought already (PA3313U-2M1G for alviso chipset)?, can I have performance or compatibility problems? What are the risks of the use of this "alviso RAM' in a 'no-alviso chipset? I deeply appreciate your input.

  Thank you!

  Hello

  The RAM modules for especially for chipsets alviso are not known to me, but the Satellite A50-522 certainly supports the memory PC2700 PA3313U-1M1G bar.
  I guess the PA3313U-1M1G and PA3313U-2M1G are the same modules from memory.

  PA3313U-1M1G and PA3313U-2M1G memory module are supported the same specifications of 1 GB - SO DIMM 200 pin - DDR - 333 MHz PC2700

  I think you can use both modules without any problem.

• Satellite L30: A few questions about the change from Vista to Win XP

  My satellite L30 has Vista Home Basic preinstalled, but I decided that Vista is still a little slow & buggy and would like to change to WinXP Pro. I have 2 questions-

  1. a change to XP will extend the battery performance? (currently 1 h with no wifi I think it's pretty poor)

  2. I intend to reformat the hard drive for all the hidden partitions will be lost. If I decide to go back to Vista, at a later date I will be able to reinstall using the "upgrade" dvd that came with my computer? I think I'm wrong in saying that this dvd contains a full version of Vista, but I wonder if my serial number still working?

  Thank you

  Hello

  If you bought the L30 with Vista operating system preinstalled, then I presume that you have received also the Toshiba Vista recovery CD.
  The Vista on the recovery CD is already enabled and you don't need to enter keys t.

  Regarding your battery question: well as you know the battery working time depends on the use of the laptop. Performance heavy on the laptop running decreases the life of the battery. It is a fact.

  But you assume the Vista needs of more resources for laptop as the XP and the Vista operating system wastes more energy than other operating systems.
  I think if you install XP on the laptop, you should be able to work with the battery a little longer as with Vista.

  Concerning

• Question about the Y510 AHCI drivers for install XP

  NiHao Lenovo Forum,

  I am a proud owner of your IdeaPad Y510. I just wanted to ask what the web page offers Lenovo the AHCI storage driver to activate the storage controller SATA on the motherboard for my laptop Lenovo IdeaPad Y510?

  I ask because Y510 as many users who install the XP will need to have these storage SATA controller drivers if they want to support higher speeds, hot plug and native command queuing (NCQ).

  I see that Lenovo provides the following AHCI drivers for ThinkPad found here:

  www-307.IBM.com/PC/support/site.WSS/MIGR-62909.html

  Also, it would be useful to let everyone know that Lenovo Y510 models come with what advice system that they have, with regard to the necessary SATA AHCI Controller driver for them.

  I see the ThinkPad models use Intel 82801GBM SATA AHCI Controller or Intel 82801HEM/HBM SATA AHCI Controller as indicated above from the URL.

  How can I check my Y510 to know what Intel SATA AHCI Controller is necessary here?

  Some clarification would be useful. Thanks in advance for any help and assistance here.

  Also another method here would not create an installation with the Intel Matrix Storage Manager drivers slipstreamed XP disc? And how does a person know which of the many Intel Matrix Storage Manager drivers should be slipstreamed to the pilot Y510 AHCI SATA Controller here?

  And how many different models of Lenovo Y510 uses different system boards? Think there are at least two, because some have been announced with a FSB 800 MHz right?

  Thanks for any help and support here in advance.

  Read the FAQ some might answer your questions.
  Also, I suggest that different motherboards are in different models, as I said there are even different colors - green and Brown motherboards there. Brown, I saw myself - those who are ASUS, green are unknown for me.
  Then, NCQ is not a feature of driver software. It is a material of HARD drive capacity to optimize movement traectory leaders to speed up the read/write process. So, no driver is required to activate. This work iven in the BACK.
  AHCI driver is inside driver chipset. Also, you can integrate it. Please, read the FAQ .
  HTH

• Question about Windows MultiPoint Server with VNC

  Hello

  I work in a research laboratory and our scientists are running a large number of simulations with MATLAB image processing.  What we all buy a computer powerful user and set up so that, up to 3-4 users remote access to the computer at any time and perform simulations using shared resources, but without interfering with each and other sessions.  I wanted to just make sure that it was feasible and iron how to put in place.  I'm guessing that I install Windows MultiPoint Server on the computer, create 3 or 4 log on bodies or users with unique IPs, install MATLAB and a VNC client for each instance, and then users would be able to connect on every instance, as if they were independent computers? Finally, it is possible for Windows automatically allocate users remote instances not used - for example, if I try to connect to an instance, Windows Me automatically assigns to the next instance of free?

  Thank you!

  Michael

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Question about squid proxy server...

  In our College lab, we have over 50 computers and they are all members of a domain, the domain controller uses a squid proxy server to filter Web sites like facebook, etc.

  I just removed a computer in this domain and in doing so, I could access facebook

  I would like to know if there is another way to access facebook from lab computers without removing a computer in this domain

  I just want to learn this for educational purposes, as I am a computer science student

  => Thank you

  You must ask the computer College. They may not know you.

• A question about synchronized waiting (block mode) for CPI in BB

  Hello

  I have such a scenario.

  Process a need to send a message to process B, in the send method, we need to wait until it receives the

  notification of process B that B has processed the message.

  All I know is that using ApplicationManager PostGlobalEvent() can send a message to B. But it is non-blocking mode.

  For example, after PostGlobalEent(), A must wait an appropriate event. There may be an another globalevent in A listener to listen on

  the notification.

  Thus in A, we will wait indefinitely until the listener has defined a status which a no need to wait any longer.

  I think that Infinity waiting consumes too much battery of BB.

  Is there a better method to avoid this problem constantly wait?

  In Windows Mobile, waitForSingleObject can easily deal with such a scenario. (blocking for the notification mode)

  I don't know if there is a similar way in BB.

  Any help?

  Sorry, I misread your original message and began to talk about the broader and more complicated case.

  You seem to want to send a message and it will hang until it is processed. You can do this as follows. You basically need a flag that can be set and queried in a thread-safe way, and it should also be possible to block until the indicator is defined without having an impact on the battery. The solution is simple. You need a flag (for example, a Boolean variable) and a monitor object. For example, you can put a Boolean field in the class of your message and use the message as a monitor instance. The beneficiary will be the message, treat it, acquire the monitor, set the flag and call notifyAll() on the monitor. The sender can thus post, acquire the monitor and loop until the flag is set, while citing wait() on the screen after each failure audit. This will have the effect of blocking the sender if the message has not yet been processed and that, until the message is processed. Waiting for a monitor is very cheap in what concerns the use of the battery, so don't worry about this.

  You can extend the simultaneous construction above to have a flag + result/exception and you get something similar to java.util.concurrent.Future of J2SE, I was talking about in my previous posts.

  P.S. If the processing of the message does not have a lot of time, I suggest that you consider the much simpler solution of using Application.invokeAndWait.