Question about batteries for laptops and a station (HP Elitebook 840)

Similar Questions

• (Redirected) Recalibrate the batteries for laptops, and to protect the life of the battery

  There is a similar program for laptop Dell of Alien? http://www.geckoandfly.com/7494/how-to-extend-Sony-VAIO-laptop-battery-life-with-care/

  I just bought a new Dell laptop, but don't seem to find something similar. I do not want to disconnect the battery in case of power failure, and will not damage my battery.

  see you soon

  Hi dannyarcher,

  Please repost this in the laptop computer forum for faster assistance.

  http://en.community.Dell.com/support-forums/laptop/

• Question about support for LabVIEW DLLS and Unicode

  Hello

  I have a question about LabVIEW and DLL functions calls.

  I use a DLL (sorry, I can't share it) that was written in C. It was written to support Unicode and non-Unicode function calls.

  The Unicode function is valid, then FunctionNameW is called if FunctionNameA is called.

  I am building a few VI to access the library. I have the regular functions of FunctionNameA work.

  My question is, does LabVIEW support versions of function FunctionNameW Unicode, and if so is it necessary Although LabVIEW is already working with the standard function call?

  Am I being redundant or what should I build in Unicode support?

  The first time I tried to test the Unicode functions, I had an error, and I guess this is a system setting.

  Thank you for your time in advance.

  DB_IQ wrote:

  I don't think I have TO implement the Unicode, but I want if I can.

  For what I do, I think almost it is not serious. But I wanted to know if it could be used.

  The short answer is "Yes, you can do it."  However, it may open a new Pandora's box.  If you're not careful, problems and complications that can still spread to other projects that are not using Unicode!  It is better not to summon this monster unless there is absolutely no other way to do the job.

• questions of memory for laptop HP ENVY 17-J099EF E0Z72EA

  Hello

  I just bought an HP ENVY 17-J099EF with Windows 8 64-bit laptop and I am a little puzzled about the DDR3 memory.

  It was delivered with a memory DDR3 8 GB (2 x 4). The number of portable computer product is E0Z72EA #ABF

  -I can't find the exact memory type anywhere. What is 12800 1600 Mhz @ 1.35v OR @1 .50V PC? The tension is important between 1.35 and 1.5V?

  -Is it possible to spend 8 GB (2 x 4 to 16 GB (2 x 8)) or 8 GB is the maximum memory?

  -Finally, if it is possible to upgrade to 16 GB, which is the ideal CL and 11 11 11 28 ok or I can take for example 9 9 9 24 without any damage?

  Thank you very much for your answer, I can find nothing converning these questions on the HP site or on the Internet.

  Kind regards

  Henry

  Hello

  Please visit the following site and ask it scan RAM on your computer. It will show you what you need:

  http://www.crucial.com/

  You can buy from them, or use the information to buy elsewhere.

  Kind regards.

• Problem with laptop and docking station

  Hello.

  We have two laptops with two docking station. Two laptops with docking station have the same problem:

  When the computer is off and its still connected to the docking station, the fan in the computer to run very fast starting. The fan turns on for a while. That's a lot of noise, which can be annoying to the person using the office. When the computer is turned on, the fan runs at normal speed. If you disconnect the computer from the docking station, the fan stops immediately. Any ideas?

  1. number and product name

  HP ProBook 6460 b

  Docking Station VB043AA

  2 operating system installed

  Windows XP 32-bit

  3. error message

  No error message.

  4. all changes made to your system until the problem occurred
  

  No recent changes.

  Thanks in advance.

  -Betroger

  Its been a while that we have solved this problem, but I forgot to post the solution.

  We sent the laptops in for repair. They changed the motherboard and fans. This solves the problem.

• Question about updating the BIOS and drivers

  Hello

  First time user. How will I know if I need to update bios and drivers? I don't want to go crashing my system, just because Toshiba say these items are available for my laptop! They were probably in the updates of windows?

  Help, please.

  Hi Andy

  Welcome to our small community
  First a little advice you should always write the name of your laptop.

  OK now, to you in general I have a question would not recommend to update anything if you laptop and operating system is stable and you don t have problems.
  Of course the update of the driver is not risky, but I would only run updates some compatibility problems with 3rd party software or hardware appears.

  The update of the BIOS is risky. Wrong or bad BIOS update procedure could damage the ROM module on the map. So be careful.

• carpet mouse for laptop and the keyboard does not?

  need help please!  my computer is completely broken and I don't know how to fix it! When I put an audio cd in my laptop it would not play & have discovered that my cd drive is not recognized and I tried to fix it, and one of the suggestions I found on the internet has been to remove the 'upper' filters so I did, but now my computer would not load first time & the mousepad on my laptop and the keyboard has stopped working and I did a cover partial windows and when the computer has finished, it restarted and I have nothing but a black screen and it seems that the computer is running, but nothing happens! now, I can not even my computer to load up!  before I had the black screen I tried the system restore, but I had no previous restore points? I tried pressing f8 but nothing, I pressed f2 and f12 but I don't understand all the technical menus? I can't even to the point of starting windows in safe mode! I really need help because I need my computer! any suggestions would be very grateful!

  need help please!  my computer is completely broken and I don't know how to fix it! When I put an audio cd in my laptop it would not play & have discovered that my cd drive is not recognized and I tried to fix it, and one of the suggestions I found on the internet has been to remove the 'upper' filters so I did, but now my computer would not load first time & the mousepad on my laptop and the keyboard has stopped working and I did a cover partial windows and when the computer has finished, it restarted and I have nothing but a black screen and it seems that the computer is running, but nothing happens! now, I can not even my computer to load up!  before I had the black screen I tried the system restore, but I had no previous restore points? I tried pressing f8 but nothing, I pressed f2 and f12 but I don't understand all the technical menus? I can't even to the point of starting windows in safe mode! I really need help because I need my computer! any suggestions would be very grateful!

  Restore the system to factory settings via whatever the manufacturer of the laptop gave instructions/media/etc. * with * the laptop or on their web page for your brand specific & model of latptop.

  It is * not * the Windows system restore - but something much more destructive in most cases - so have good backups of things you care about.

• Questions about syncing wireless keyboard and mouse 5000?

  How can I sync my old 5000 for a new mouse 5000 keyboard and the receiver?

  Hello Eamon,

  Welcome to the Microsoft Community Forum.

  According to the description, I understand that you are facing problem when connecting the new Microsoft mouse USB dongle receiver with the old keyboard Microsoft Wireless 5000.

  I suggest you to contact the Microsoft Hardware support for assistance.

  How to contact Microsoft if you have questions about your hardware device.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Question about encryption for a VPN established between two of our sites

  We have two routers Cisco 2951, one at our main location and one at a branch.  An engineer for a local company came and worked all the parameters, including the VPN between the two men.

  For an upcoming exam, the firm wanted to know what kind of security/encryption has been implemented between the two routers.  The engineer is no longer available, so I've went over our configuration files for each of the routers and will have questions about what to tell them (I'll be the first to admit that some of this stuff is over my head).

  I enclose the portions of the configs with "crypto" information he put in place.  If you see something wrong, or need something extra, let me know.

  Thanks in advance!

  That's what you use:

  Phase 1: 3DES, SHA1, PSK, Group2 DH (1024 bits), life time 86400 s

  Phase2: 3DES, SHA1

  Which is today considered legacy crypto, but probably nothing to worry. The crypto-config has always considered that there is "room for improvement"...

• Question about the composition settings and make

  I looked for an answer to my question, but had to ask at resort, sorry, it's pretty basic, but a direct response is needed I think.

  I imported a project in Premiere pro with two layers of still images with movement and applied effects. I work for a few weeks now, with variations on these pictures and had many number of exports of EI through the render queue.

  After you import the compositions of first CC my starting point; composition and other settings of composition parameters are all resolved HDTV 1080 25 but the set resolution in which I unfortunately now has, is defined as 'Half' (960 * 540)... New compositions also sets the default resolution somehow half...

  My question is about my previous exports and subsequently.  Together of the composition to "Half" resolution affect the quality of my compositions exported using the render module? So far, all my renders are 1080 p by default and no 960 * 540. These have been uprezed to 1080 of 960? ... - I have not changed any setting on the resolution in the rendering module - they all came out 1080 after.

  Thank you

  Together of the composition to "Half" resolution affect the quality of my compositions exported using the render module?

  N ° except if you change the settings of default rendering, which is "Best settings" in "current Configuration".

• Question about a PC laptop battery

  Hello!

  You are a beginner and I have a question. I need a new battery for my HP laptop and I want to order from you through the online system, but the problem is that I live in another country and that he would like to know that you distribute HP products in other countries or only in America?

  My apologies if the question is not asked in the topic

  Hello!

  Thanks for the reply, I'm answering your question.
  I live here in Estonia, the parameters of my laptop:

  HP Support Assistant

   

  Product name: HP ProBook 4530 s
  

  Serial number: {Information}

  Product number: BOY15EA #ABB

  Operating system: Windows 7 Home Premium 64-bit Service Pack 1

  

• Have a question about Adobe CC 2015 and Internet /Play a question to Internet connection and adobe CC

  I will buy a PC soon and I should install Adobe CC 2015. However, by economic measure and time, I wish not to have internet at home. I was wondering, if I take a subscription to Adobe CC, doi - I absolutely have internet at home pour have access to the software? In the sense, if I connect to the internet to install all the software, what important pour the rest of the things that I am connected to the internet all the time? I wonder this because I have another laptop and often being in l 'outside the House, I don't see l' use an internet capacity.

  I will buy a PC soon and I should install Adobe CC 2015. However, as a measure of economy and time, I would have no internet at home. I was wondering if I take a subscription to Adobe CC, do I have to have Internet at home to access the software? In this sense, if I connect to the internet to install all the software, is it important for the rest of the things that I'm connected to the internet all the time? I wonder this because I have another laptop and often being outside the House, I don't see the point of having internet.

  Please visit CC help | Creative cloud / common Questions for more information.

  Hope this will help you.

  Kind regards

  Hervé Khare

• A few questions about integration between POET and EBS

  Hi you
  I am a new bie BIEE. In those days, have a look at the POET architecture and BIEE components. In the next project, there is some work on the development of POET based on request of the EBS. I have a few questions about integration:
  
  (1) generally, the POET application and database server is decentralized with application and database EBS? Both BIEE 10g and 11g version can be integrated with EBS R12?
  
  (2) in the POET administration tool, the first step is to create arrays of physics. If the source application is EBS, is it still necessary to create the physical tables?
  
  (3) if the physical creation of tables is needed, how to transfer data from the source of BSE BIEE physical tables tables? What ETL tool is preferred for most of developers? generator for warehouse or Oracle data integration?
  
  (4) during the data transfer phase, there are many many large data to transfer, how to keep the entire? for example, it must transfer 1 million lines of source to physical tables BIEE database, when 50% is completed, users try to open the POET report, they can see the new data of 50% on the reports? is there some transaction in phase control ETL?
  
  could someone give some pointers for me? I am very appreciated if you can also provide any other information.
  
  Thanks in advance.

  (1) generally, the POET application and database server is decentralized with application and database EBS? Both BIEE 10g and 11g version can be integrated with EBS R12?

  You shud look at OBI request here that uses OBIEE as a tool for reporting with pre-built modules. 10g & 11g comes with different versions of the applications of BI that supports sources such as Siebel CRM, EBS, Peoplesoft, JD Edwards, etc...

  (2) in the POET administration tool, the first step is to create arrays of physics. If the source application is EBS, is it still necessary to create the physical tables?

  His independent of any source. It comes to OBIEE modeling to create the RPD with all the layers. If you build from scratch, then you will need to create all layers else if BI Apps is used so you can get pre-built RPD and other pre-designed components.

  (3) if the physical creation of tables is needed, how to transfer data from the source of BSE BIEE physical tables tables? What ETL tool is preferred for most of developers? generator for warehouse or Oracle data integration?

  BI apps comes with ETL pre-built mapping to use with the tools majorly with Informatica. Only applications BI 7.9.5.2 comes with ODI, but oracle has the intention of having only ODI for any other versions.

  (4) during the data transfer phase, there are many many large data to transfer, how to keep the entire? for example, it must transfer 1 million lines of source to physical tables BIEE database, when 50% is completed, users try to open the POET report, they can see the new data of 50% on the reports? is there some transaction in phase control ETL?

  User will see still old data because its good enable Cache and serving it after each load.

  See http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html...
  and a lot more docs on google

  Hope this helps

• Questions about close cache events and the defeat strategy "ALL".

  I use near cache, and try to determine what defeat strategy would be better for me. My cards before being highly volatile, I'm considering strongly using the strategy of "EVERYTHING" for at least some of my caches.
  
  This brings me some questions about the event cache stream closely when the strategy using ALL:
  
  (1) should I expect an event to be published from the back cover when an element is added? (i.e. putAll() called cache before)
  (2) should I expect an event to be published from the back cover when an item is deleted? (i.e. remove() called cache before)
  (3) should I expect an event to be published from the back cover when an element is expelled from the rear because of size constraints?
  (4) should I expect an event to appear from the back cover when an element is expelled from the rear due to the expiry?

  Hi Tom,

  near cache before cards do not store the entries inserted in the back cover, so if you have saved a listener on the front plane, you will get the notification to the listener on the plan before all the inserts in the back cover of other nodes.

  It's a little different for entries that have been asked by the local node through the near cache (not directly on the distributed back cache). If the cache almost didn't get call so far, then they will not go into the front plane, so it's the same as if inserted directly into the back cover. It is the starting of the near cache behavior. After the first EEG puts will be cached in the front plane. Once that puts is cached in the front plane, then the listener before card will see put through the cache close to the same node, but not of other nodes.

  Also, the cache near registers a listener lite, so it becomes not the input values changed, as the keys.

  A listener that you entered on the back cover will see each insertion, if you do not save a MapEventFilter or a MapEventTransformer custom with the listener. A MapEventFilter can filter inserts away (I think, the cache similar to that, too).

  Best regards

  Robert

• Designjet Z2600: Questions about head of ink and printer maintenance

  We have recently acquired a printer, Designjet Z2600 24 "large format.  A few questions so we can know what to expect:

  • Dry ink: A colleague suggested that dried ink can be a problem if the printer is not used frequently.  We plan on it using every two weeks, but there may be times when a month or two will pass between uses.  Is this a problem?
  • Print heads: will be the printer alert us when they need to be replaced or should we look for quality defects?
  • Management of ink: before printing, the printer will be well estimate ink necessary for work and alert us if we need to insert the new cartridges before employment passes by?

  Thank you!

  Hello

  The recommendation is to keep it at any time.

  If you use the printer turns off completely the power button.

  When not in use, it will go in standby mode, wake up maintenance and sleep.