Question about business rules

Similar Questions

• Question about business naming rule

  Hello
  
  As we know that there is a restriction on the number of characters, you can enter the name with a BR - y there a way I can have two different names assigned to the BR even in environmental assessments and planning? Something like an alias? Or if it is something that cannot be done then is there a way to make the description appears in the left pane, when the business rule is associated by the dataform?
  
  We have scripts/rules that have short names, but as users are perhaps unable to understand by looking at just the names, was wondering if we could make a little simpler for them but either giving it another name (alias) or at least present the description?
  
  Please let me know your opinion on this.
  ~ Hervé

  How many characters do you think the restriction is, business rules are don't have the same names as calc scripts naming restrictions.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Question about business and Service of Proxy

  Hi friends,
  I have a question about services and proxy services business IE I need to find the time it takes to call an operation on multipoint business of proxy service, how can I do in oracle service bus (OSB)? You can help quickly

  If your question is only about the performance analysis,
  try to activate the 'monitoring' on the 'operational' of the Service Proxy Service/Company tab.
  For the Proxy Services, if you activate at the level of the 'Action' you get a lot of information about each individual action in a power of attorney.

  See http://www.javamonamour.org/2011/06/osb-profiling-your-proxy-service.html

• Good way to migrate Business rules

  Hi all.
  
  I have a question about business rules migration DEV prod with 2 separate instance of Shared Services
  
  I used to do an Import / Export of BR using Regional service and then manually configure projects and security. While it seems to work ok. I wonder if there is a more formal way to do this.
  
  I seems an option migrate repository but am not sure which suppose that pros do. I have a feeling that this is not quite what I'm looking for. All the tips are greatly appreciated.

  Hello

  That unfortunately is a big problem that was never really dealt with business rules, you can not select multi and remove them, you must also remove the rules before inmporting because it does not crush them it is just said it already exists and ignores him.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Ranging from the form of a business rule is incorrect.

  Say we have 2 forms of planning F1 and F2 with 2 B1, B2 business rules. B1 is set to F1 and B2 is set at F2.

  We open form F1 and open B1, and then open the form F2 and run B2, we observe that instead of B2 B1 is running.

  This strange phenomenon occurs in all forms with their related business rules.

  Note: Is not a specific user or a specific browser.

  Someone has seen this before. Hyperion Version: 11.1.2.2

  Enjoy the anyhelp.

  Reading of Re: question in business rules with shapes (11.1.2.2.300) attahed

  See you soon

  John

• Question about the business rule

  Hello
  
  If I've updated the business rule by updating a parameter in the Dev Environment, I need to export this business rule in the Prod environment or can I directly change the code in the production environment.
  
  Please advice me on this.
  
  Kind regards
  
  Upendra.

  Hello

  To import the xml data, just go on your prod EAS, make right click on Business Rules > import and select the xml file.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Ask a question on two occasions due to a business rule

  Hi all
  
  I have a requirement where I have to ask for the new value of a number attribute in the same interview soon I already answered it according to a business rule.
  
  for example, consider the following
  

  The application form is complete if
  The applicant's age is known
  
  {The applicant's age is a Number}

  *(but a hypothetical Business Rule is: if the age is under 18, Ask the question Again) *.
  
  i.e.
  Interview 1:

  What is applicant age: *20*
  The application form is complete

  Interview 2:

  What is applicant age: *15*
  What is applicant age: *13*
  The application form is complete

  Interview 3:

  What is applicant age: *12*
  What is applicant age: *12*
  The application form is complete

  Is there a workaround solution.
  
  I hope this helps.
  Thank you

  Idea 1:+ warning use a rule like:

  Warning ("you said that your age is less than 18 years of age.  If this is correct, press the submit button. ") If
  age of the applicant<>

  This will cause a warning message on the screen, but (unlike an error event) it allows the user to proceed with the interview.

  Idea 2:+ create a second age attribute. If the value of the first attribute of age is less than 18 years of age, ask the second. Of course, this creates a risk of inconsistent data (such as your scenario 2), so you would need additional rules to resolve the contradiction.

  I'd go with the first approach, personally.

• Business rules in soa suite 11 g

  Hi all

  I'm trying to understand the rules of trade to oracle 11g. I have the following questions: -.

  1. If the SOA and Admin Server restart, go back to the status of business rules to the State of origin?

  Lets say, I have a business rule where the credit limit is less than 100 (Limitecredit < 100) it's my rule of origin. This rule was changed so such that the value of credit limit is now 200 (Limitecredit, 200) to the composer SOA. Now if the SOA and Admin Server is restarted, the business rule will get back to the original state i.e. (Limitecredit < 100). Please let me know because I don't have an environment now to test this point.

  2. What is the difference between 'say again' and 'Edit' actions?

  Thank you

  Hello

  1. about this one: no, the State is saved in the schema of metadata (data base). If you restart your server, the values of the rule would be with the last value entered.

  2. with 'say again' a new charge is created, for example if you receive a Limitecredit and if this value is less than 100 you create a new message with information about the benefits of credit. But when you use 'Edit', you change an existing load, for example, if your Limitecredit is less than 100, the attribute 'requireManualApproval' of the current message received would be updated to false.

  I hope this helps.

  Jorge

• Migration of business rule

  Gurus,
  I have a question about the migration of the Ros.
  11.1.2.1 is, and I have some BRs in my planning application.
  I want to migrate the BRs from one environment to another.
  To do this, can I export business rules from the source (by right-clicking on the node RULES of business in environmental assessments) and then import them into the EAS target environment. If so, is it specific anyhthing I need to follow, for example any file system to save it or I can save anywhere, etc. like this.
  And what I need to do something after I import business rules?
  Any suggestion would be great.
  Thank you

  If you go this route, you just need to make sure that you select the rules and dependants and save in an xml file, the in your import target the return XML in.
  It is also possible to migrate using LCM, so choose the method you prefer.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Question about the issue of the Double NAT...

  Hah I posted for a little.  I have a question about Double NAT.  Is it wise to launch?  Reason why is that I have a WRT54G v6 router and the Zoom ADSL X 4 Modem/Router/gateway and it seems that sites take just a little more time to respond to Web sites.  I just want to know I have to turn off (i.e., go in with my router bridge Mode) or what.  Or leave it alone.  Now one last thing: that the problem of slow could actually be AT & T but I have the feeling that this isn't.

  What configuration options you have on the Zyxel to fill? What have you tried exactly?

  The basis for the first option is:

  * Bridged Zyxel.

  * Linksys configured for PPPoE with your user name and password for the internet connection.

  Instructions to fill the Zyxel are here or here depending on the exact model of Zyxel.

  The second option is:

  * Zyxel doing business as the router. I assume here that the Zyxel is on 10.0.0.2 with a subnet mask 255.255.255.0.

  Unplug the Linksys to the Zyxel. Connect a computer to the Linksys. Open the web interface of the WRT to http://192.168.1.1/

  On the main Setup page:

  1. change the LAN IP of 192.168.1.1 address 10.0.0.1.

  2 disable the DHCP server.

  3. save the settings. You will lose the connection. Unplug the computer.

  4. wire one of the numbered LAN ports of the Linksys for the Zyxel. Do not use the internet port of Linksys!

  Now you should be able to open the Linksys web interface to http://10.0.0.1/ all devices connected wireless of Linksys or connected to one of the three LAN ports must have a connection to the internet via the Zyxel.

• Prevent the business rule to run simultaneously

  Hi all

  We are on Hyperion Planning 11.1.1.3.500. One of our business rules makes the system completely meaningless with its results when some users are running at the same time. A person must have been necessary a HBR not to run when it is already running. I need your suggestions to avoid the business rule to run simultaneously.

  Thank you

  Hello

  • tell users check the console to work first, before you run the rule.

  or

  • have a member of the system in your dimension that you can use as a flag. You set it to 1 as the beginning of the rule to indicate he runs, 0 / #Missing at the end of the rule to indicate is finished. You then add a @RETURN to leave the calculation if this flag is set to 1 in your rule. Just be careful about this because if for any reason the calculation fails, or is killed by an admin then your flag is set to 1, but you can still have a form of admin to reset these flags easily if necessary.

  See you soon

  JM

• 11.1.2.3.700 Calc manager - cannot open business rules in IE11 but can in Firefox

  Updated 11.1.2.3.500 to 700 for the IE11 support.

  I installed the following hotfixes:

  1 20675028 - SSP

  2 20612400 - workspace

  3 20643564 - hyperion Planning

  4 20929659 - architect EPM (foundation server)

  5 21292109 - Manager of calculation

  6 20768325 - statement and analytical framework

  7. 21240419 - ADF MLR

  I deleted the directory tmp and cache on servers managed and the Planning0 and calcmgr0

  (Oracle\Middleware\user_projects\domains\EPMSystem\servers\CalcMgr0)

  History/cache deleted my Internet Explore.

  When I go to the calculation Manager and try to open any business rule of calculation Manager I receive the following informational message: "Please try to reload the component script again." When you click on 'OK' I do not see any text in the business rule. (See attachment)

  
  I can run the business rules of the application of planning successfully and I can see them under "Shared Services" and import/export business rules.

  Calculation of the Manager process runs on the server, the logs show no errors in the Oracle\Middleware\user_projects\epmsystem1\diagnostics directory

  Tried to search for the message but could not find anything about this message.

  Any suggestions?

  OK, I think I understand what is happening, I noticed a difference between the user interface in your screenshots and it seems that you disabled for calc Manager ADF.

  You will be able to confirm is that you run a report of registry and it will have a BINDOWS_ENABLED = true for the CALC_MANAGER_PRODUCT property

  If I pass the ADF to bindows so I see the same problem, is there a reason you do not run ADF mode?

  See you soon

  John

• "Cascading" business rules composite form of Tabs

  Long post. I'm here for the ACEs in the stem. In 11.1.2.2.300, we have a composite form with multiple shapes in the form of tabs. Two of these forms have business rules that run on individual forms, not on the Composite shape. Three of these forms have no business rules that run when recording. The following behavior is:

  1. when we open the composite shape to a tab of a form without top business rules and click on save, the data is committed.

  2. when we opened the composite shape to a tab of a form that has a business rule that works on record and click on save, the data are engaged and the business rule is executed.

  3. the problem is there: when we open the composite shape to a tab of a form that has a company that rule runs on save and then we open a DIFFERENT tab with a DIFFERENT shape which has NO business rule to this subject, and click on save the data on the open tab/form is committed and the business rule goes against the members on the OPEN form. Not the form that made the business rule to this topic.

  4. If, after step three, you open a different form that also has a top business rule and press on save, it runs both the business rule in the open form, AND the business rule of form before.

  Is this a bug? For?

  For those of you more visually inclined:

  Form/tab A - form by default upon opening, without BR

  Form/tab B - BR

  Form/tab C - no BR

  Form/tab D - BR

  Form/tab E - BR

  1. open Data Composite of form - see form A. press on save - committed to the database.

  2. click on the tab B. press on save. Data committed to the database. B rule business runs.

  3. click on the tab C. press save. Data committed to the database. Company B of the rule is running on members on form C.

  4. click on tab D. press save. Data committed to the database. Company B of the rule is running on members of business of d. form rule, D runs.

  5. click on the tab E. press save. Data committed to the database. Company B of the rule is running on members of the form E. company rule D works on members of the form E.

  NOW the weird part!

  1. open the composite shape - see formula.

  2. click on tab D.

  3. click on the tab B. press on save. Data committed to the database. Business rule B runs first on the members on the form B. business rule D then runs on Member on form B.

  Our first theory was that because BR B came first in alphabetical order in the calc Manager, B pulled before. We have this disproved by renaming and changing the order of B and D in calc Manager. BR B always run before D. BR our second theory was that the business rules are executed based on the order in which they appear in the tabs. But we have refuted this as well. We concluded that the order of business rules is in order that their "links" exist in the rules on the Composite shape. Help!

  Tried this on our system and we have same question... It looks like another bug in EMP 11.1.2.3... SR trigger with the support of the oracle, they could fix it in future versions...

• How to migrate EAS Business Rules for Calc Manager in 11.1.2.1 (without using EPMA)

  Hi all

  for the moment, we are on 11.1.2.1 and one more late upgrade scheduled to 11.1.2.3, use Calc Manager rather than the rules Business (EAS). Therefore, I would like to upgrade to business at Calc Manager rules, but without using EPMA (we would still use the classic Planning Administration). I read several documents and sites, but I was unable to find a way to do... Does anyone have a how or documentation about my problem?

  Thank you very much

  André

  P.S.: Maybe to make it a bit clearer: I won't spend 11.1.2.1 to 11.1.2.2. I would only use Calc Manager instead of business EAS rules 11.1.2.1 and I couldn't find anything that shows how or if it is possible to migrate from the business rules to Calc Manager (without using EPMA).

  You can change the method of calculation of the Manager of Calc application. I replied to your message in the Manager area of Calc.

  Concerning

  Celvin

• Question about creative cloud "individuals".

  Hello!

  Question about creative cloud "individuals".

  I'm a single trader working in Russia. I have an advertising agency. Work alone.

  Issues related to the:

  1 can be installed on 1 computer and use creative cloud 'Individuals' for commercial purposes?

  2 will. what documents I receive after payment?

  3. under what conditions, the required version of the '' Business. ''

  lol at communincate with the support of adobe:

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html