Question about cisco ex option 90 key

Similar Questions

• Cisco TMS Option Delete key

  Is there a simple way to remove an option entered into TMS key? Licenses provided us licensed 25 movi when it should have been 25 endpoint licens. We want to remove this movi with MSD clients license.

  Sent by Cisco Support technique iPad App

  Only through the direct modification of the SQL database.  If SQL server was installed locally on the server by Setup, open a command prompt and do

  Osql-s localhost\sqltms e tmsng d

  You will get a prompt like 1 >

  Enter the command below... replacing string with your current license key

  delete from OptionKeys where key like 'string'.

  go

  Type exit to exit the osql tool.

  

  If your SQL server server is installed somewhere else or a different instance name, you need to change the osql command (s specifies the address of the server... EI is to use windows authentication) or the use of SQL Management Studio.  If you use an external SQL Server, what to be put in place can help you.  If you are unsure, open tools TMS on the TMS server and review the database connection properties.  They will tell you where the TMS database.

• A few general questions about records OS, ID and keys

  Discs, ID and keys

  A few questions:

  Are all the same windows installation disks?
  When I say the same thing, I mean if they are the same product, i'e two disks with Vista Basic on
  Is the product id part of them somehow?
  What's this number on the disc? or do I have reason to think that it is created by the installation and hardware on your laptop / pc
  You can use the same disc windows genuine to install the same copy of windows on two laptops, but by using laptops to separate the key product authentic?
  If someone could answer these for me I would be very grateful
  Jim

  Hello

  manufacturer's recovery disks are specific to the make and model

  You cannot use a Dell disk on an HP machine

  ____________________________________________________

  BUT, if you have a DVD of Microsoft Vista, it does not matter whether a Microsoft Retail or OEM Microsoft license disk (and I don't speak of HP OEM here, but more particularly Microsoft OEM), read this:

  Microsoft Vista DVD contains all versions of vista

  Make sure that you borrow / use the correct 32-bit or 64-bit microsoft dvd to your computer because there are 2 Vista DVD

  and this is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  That's why they are purposes of resettlement used if you cannot acquire the recovery for a particular reason manufactrers discs

• Question about the power option "Sleep with a password on wakeup"

  What is the difference between sleep with a password required to wake up and lock? I understand that if I choose the lock, other users can still connect?

  Hello Jim,

  Please keep us updated on the status of the issue. I apologize for the late response.

  I would like to inform you that if you have not set a password on your user account, then Windows will not ask for the password to unlock or wake the computer from sleep mode. If you move the mouse or press a key on the keyboard, the computer will automatically unlock or to wake up the fashion 'sleep'.

  See also:

  Shut down (shut down), sleep, or put your PC in hibernation

  Power plans: frequently asked questions

  Hope the helps of information.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  Thank you

• Re: Satellite A200: Question about the Windows Vista serial key

  I have a Toshiba Satellite A200 and I doubt, in everest, I can see the key of Windows Vista, but it's different to the Windows key in the tile to the bottom of the laptop.
  I change anything in the laptop because I bought, I have use once the recovery cd, but I have not a pirate key or something like that.

  Why this different key?

  Post edited by: Admin

  I agree with the user above.
  The serial key you will find at the bottom of the device is not similar to the serial key that can be read using a few 3rd party applications!

  But you don t need such series on your Toshiba laptop key.
  The restore CD contains an image of Toshiba which is already activated!

• Question about the 'Hidden' option in pictures

  If I choose the option 'Hidden' under 'Properties' in the Windows Vista image files, the file disappears and I don't know how to get it back.  Can someone help me understand this.  Also, can I encrypt a file picture where I'm the only one who can open and view it, set a password to it?

  Note: for more information type encrypt and permissions of files in Start - Help and Support.

  Even if your version of Vista is not a Security tab, you can always change the permissions from the command line.

• Question about system recovery options

  Hi, I'm Italian so I'm not good in English grammar...
  I write this post because for asking if I will use the o recovery. S. (Windows Vista), I have the O. S. I bought the laptop? Thanks a lot for your answers...

  Post edited by: organittos

  Yes! If you use that laptop recovery media will start the first time where you bought it.

  People here generally use the term factory settings. With other words: If you have some problems using supplied recovery media and the laptop will be installed own operating system.

  Good bye

• Question about "Windows 8.1 DG to Windows 7 Pro 64-bit" and Windows product key

  I have acquired a recnet ThinkPad T450 fdrom a retialer online (NCIX) and I hav ea a few questions about the installed Windows operating system.

  Before I just go further, HRE are some information about my particular system.

  Lenovo ThinkPad T450

  Model: 20BV00BUS

  CPU: Intel Core i5-4300U

  RAM: 4 GB

  Under the product description, it was stated "Windows 8.1 DG Windows 7 Pro 64." My understnading, the ThiknPad has been installed with Windows 8.1, but downgraded to Windows 7. There is also a Windows 8 Pro badge sticker at the bottom of the matchine.

  Is it possible, at the end of the user/consumer, to alter the functioning ti repressive back Windows 8.1?

  Can I create a recovery with Windows 8.1 disk?

  A separate but related matter relates to the Windows product key.

  I noticed the Ultrabook do not come with a sticker / label with the Windows product key (i.e. COST). Some quick research indicated that the Windows key is programmed into the BIOS.

  This indeed true (I wish an audit)?

  The key is visible in some way (for when you need to reinstall the operating system. I have not tried to enter the BIOS at the moment)?

  Thank you for taking the time to consider my question.

  Kind regards

  Victor L.

  Hi Victor,

  I'm in the same boat as you type, but want to keep the facilities of Windows 7 rather than pass them to 8. Just like you, I buy our Lenovo from different retailers and they come with windows 7 installed through the Windows 8 lower upgrade program.

  We had one or two laptops come with a recovery media (for windows 8/8.1 only) but have noticed that all laptops now come with no physical media or codes for the recovery. WIN8 stickers, you described is more came with the license key on the sticker (it comes to stop you using the same license again and again, microsoft will get more money if you buy another license etc.). I also saw that the key is essentially located in the BIOS but were not able to test what we use any of windows 8. I use it even at home!

  To answer your question, you can get a recovery of Lenovo for Windows 8 media!

  Go to the following link: https://support.lenovo.com/us/en/lenovorecovery

  (It help you understand why this method is used on this page as well)

  Select Start,

  Please have your serial number of your laptop, (to find it go to this link: https://support.lenovo.com/us/en/find-product-name)

  If you qualify (which you will very probably) Lenovo will ship for free, recovery disks give it a go, took me 2 minutes.

  I hope this helps.

  Best regards, Max.

• Question about the differences in commands

  Hey guys -.

  I just had a few questions about the differences between orders that seem to perform the same function.  Can you let me know if an order is more preferable to the other and what the difference is.  I would really appreciate it as it I currently practice some INE laboratories and I see that orders change from lab to lab.  Thanks advance!

  1. When you write a static NAT for specific host 1 - is - this important if I understand the 32 subnet?

  EX: static (inside, outside) 1.1.1.1, 2.2.2.2 VS static (inside, outside) 1.1.1.1 2.2.2.2 netmask 255.255.255.255

  2. when I'm setting up a router as a CA server and it is necessary to "export" the key, whatever my method of exporting the key?  If so, in which method call for which solution?

  EX: key export cryptographic rsa ciscox pem URL nvram: cisco VS. exporting key 3des cryptographic ciscox pem 3des rsa terminal cisco

  3. If I have to mark a packet with a DSCP of X value, matter if I use the 'set dscp' VS 'set ip dscp?  If so, what is the difference?

  FXY

  Policy-map X

  class X

  the dscp X value

  VS

  Policy-map X

  class X

  X ip dscp value

  I guess pertaining to 2, if i was speaking in terms of from a cisco router to another cisco router - would terminal be acceptable?
  
  

  Yes, the "Import cryptographic key" command can take a url and also from the terminal entrance. In this terminal case wil is much easier.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Questions about Adobe CC 2015 & El Capitan

  My salary is based on the Adobe Creative Cloud products, and after that I updated (not upgraded) for OS X El Capitan I have ALL KINDS OF QUESTIONS. Illustrator all my art breaks into cubes and my workstation of creation-Pro-CC 2015 won't even launch. When I opened a video project, it says open and displays a loading bar. When it finishes loading the workspace does not appear.

  I opened a discussion on 01/10/15 with an Adobe support person, and she kindly told me that Adobe CC does not work with the beta versions and that I should get off at Yosemite. I didn't have a Time Machine for Yosemite Backup so I'm looking for a workaround solution. I'll first MANUELLEMENT SAVE all my files to an external hard shore, then use a second empty hard drive to install Yosemite.

  It is incredibly frustrating that Apple and Adobe gave no public warning on these issues, which are perform as many people. When I find a way to return to Yosemite, I'll let you know.

  Hi all, I come bearing the GOOD NEWS! It's a way to downgrade to El Capitan in Yosemite (or whatever OSX you had installed before El Capitan)

  So after a week of intensive research, I found a solution which allow me to get off at Yosemite. I also used the same technique to help the Mavericks a downgrade of El Capitan colleague (he never upgrade Mavericks Yosemite). Basically, this tutorial will help you downgrade to the OS X version that you had before you download El Capitan.

  The one caveat is that you'll need to erase your hard disk Mac (Macintosh HD). I know, it's daunting, but if you have a way to backup your computer, PLEASE do so before following these instructions. These came from an apple support thread.

  __________________________________________________________________________________________ ________________________

  If you have a Time Machine backup, you need this support page:

  https://support.Apple.com/kb/PH18848?locale=en_GB

  If this isn't the case, then you will need to make an installer of Yosemite at least 8 GB USB. (a USB3 will be a much faster).

  First download the installer for OS X 10.10 Yosemite from the Mac App Store in the shopping section (you may need to keep alt/option while clicking on purchases. Once it is downloaded, just to leave the Setup program and set the name of the file uploaded to InstallOSXYosemite.app (.app only of course, don't make no. app.app)

  1. plug your USB into the computer and open disk utility (in Applications).

  2. Select the USB in the sidebar left and click on the tab clear.

  3. Select Mac OS extended (journaled) in the format box and set the name be YosemiteInstaller

  4. now, click the Erase button and wait until the formatting process completes.

  5 tab partition and select 1 Partition menu drop-down layout Partition. Click on Option and make sure that the Table of Partition GUID is selected as the partition scheme, with its YosemiteInstaller value name.

  6. start the Terminal application (in Applications/Utilities) and copy - paste the following command in and then press ENTER:

  • sudo /Applications/InstallOSXYosemite.app/Contents/Resources/createinstallmedia--volume/Volumes/YosemiteInstaller applicationpath--/Applications/InstallOSXYosemite.app--nointeraction

  7. This will create the bootable USB key. It takes between 10-20 minutes. Do not interrupt the Terminal or eject the FlashDrive during the process. Once the process is complete, you will see the message "copy Complete. Fact. »

  The bootable OS X Yosemite USB flash drive will be ready for use, and you can start the own installation process. How to clean install OS X Yosemite on your Mac.

  8 make sure that the bootable USB is connected to your Mac, and then restart the computer. As soon as the Gong to start playing, press the Option (Alt) key.

  9 choose the USB key on the startup disk selection screen and press enter/return on the keyboard.

  10. wait until Setup of Yosemite appears on the screen. It may take a few seconds or a few minutes.

  11. click on disk utility and then click on continue.

  12. click on Macintosh HD in the left pane and then click Delete on the part at the top right of the window. Leave all settings to their default values and then click the clear bottom-right button. He will wipe away all the files stored on your hard drive to boot.

  13. when the delete process is complete, return to the first screen where you select disk utility. Now click on install OS X and then click on continue.

  14. choose the Macintosh HD partition that you deleted in step 5 and then click on install.

  Troubleshooting Guide:

  a. If you are using a flashdrive make sure it's more than 8 GB. Note that a 8 GB flash drive is actually of 7.66 concerts. I recommend a 16 gig to be sure.

  b. If you are without downgrading to the Mavericks, follow exactly the instructions above, but replace every occurrence of the word "Yosemite" with "snipers". (for example in step 3: name flash drive MavericksInstaller.app & copy and paste the following text:)

  • sudo /Applications/InstallOSXMavericks.app/Contents/Resources/createinstallmedia--volume/Volumes/MavericksInstaller applicationpath--/Applications/InstallOSXMavericks.app--nointeraction

  c. step 6/7 took about an hour and a half. Just be Patient.

  d. step 8 took a few tries, but don't give up.

  Overall, just be patient with your Mac. Let, let it do its thing. This WILL WORK. He has done for me & now I am in illustrator, Photoshop & first perfectly. It's good to be back!

• The specific question about the placement of an image into text.

  Hello, I had a question about the placement of an image into text.

  I did the contours to create text to place the image inside. My text is 5 words and two lines inside the box.

  When I do create contours he gives me 2 transparent route separate layers for the top and the bottom line.

  How will I be able to do that in a single layer of compound to place image that expands to the two lines?

  First of all, there are two ways of describing the type. The default value creates anchored objects. You want a separate object, so hold down the Option/Alt key when you create outlines. Drag the new contours to separate the text block.

  It is useful to open the layers panel and view the contents of the layer. You have created a group which consists of two transparent traces. In the layers panel, expand the layer so you can see the structure. Shift-select the two transparent traces. (Make sure that the group is not selected.)

  

  Then choose object > tracks > make a compound path. This makes the two transparent tracks into one. Then, you can place or paste into the single compound path.

• Questions about the installation of ColdFusion 9.0.2 version of existing in version 9.0.1

  Hello

  I'm currently running ColdFusion 9.0.1 enterprise edition and plan to upgrade to version 9.0.2 version. I understand that this requires uninstalling existing 9.0.1 and perform a new installation of version 9.0.2 version. My concerns are below:

  1. for the installation of the 9.0.2 version the 9.0.2 installer (demo / trial version) must be downloaded and the existing serial number (used in version 9.0.1) can be given during installation to convert it in fully registered mode - please correct me if my interpretation is incorrect here. My question is will the existing serial key (as shown in the page Admin of CF 9.0.1 version version) work with the 9.0.2 version as well?

  2. There are many features that are present in the current 9.0.1 version - for example the sources of data configured in the Admin see Y page there a way I can save these configurations of the existing version and to migrate settings to the new 9.0.2 install, or what I have to do the entire configuration manually after the installation of new? Data sources is something I can think; What other configurations can I save, if such a provision is available?

  3. in the installation of the 9.0.2 version there is a question about "configure the Web server for CF Connector" allows me to add Web/sites Internet servers during installation. If I select "built-in Web server" as the option (so do not configure any Web-site Web server), can I change this and configure Server/site later, after compeleting installation?

  What would be the things I need to be careful during this installation to version 9.0.2 from 9.0.1?

  Thank you!

  Arun-

  I did a successful version 9.0.2; installation answering my own questions, for the benefit of future development-

  1. Yes. Only the serial number is required (as shown in the Page of the CF Admin of existing facility)

  2 configurations (for example: data sources) can be exported. Go to CF Admin Page, click on packaging & deployment, click on Archives of CF. Basically, you export settings as files with the extension archive. car. Once exported from the current installation, it can be imported by clicking on the button deploying car file.

  3 server configuration can be modified (Add/Remove) by using the "Web Server Configuration Tool" which is installed by default with CF 9. You can find it under program files (windows OS).

  I had some problems during the installation. After installation, the CF Admin page would not be made. Virtually no cfm page don't take charge, because the extension is not known by the IIS (or the server you are using). To set this up, use the "Web Server Config Tool" mentioned above. This launch and activate the check box that is on the rendering cfm pages (forgot the exact name). Once this is done, cfm pages must load. I had to enable this and then do a reinstall but.

  -arun

• Questions about the update of the related .ai files

  I have two questions about related images.

  (1) sometimes when I make changes to an .ai file, the InDesign document will automatically update the image as soon as I save changes in Illustrator. In other words, I do not need to update the link in the Panel links ID.  Other times, however, the link will not update, and I have to click the yellow triangle next to the image in the links Panel to see the changes. Is there a reason why this is happening and is there an easier way to update images as the links Panel. In Quark, I could simply double-click on the image, and a dialog box asking if I wanted to update the image. This isn't a big problem for me, but I thought I'd ask.

  (2) every time I make a change to a file .ai, the image linked in InDesign always re-scales, and I can't understand why he's doing or how to stop it. For example, I placed a bar graph in Illustrator in a fitted frame and sound + x and + values there. He settled on a scale 100% and I will not change that. Then, I had to make a change to a text label on the chart, making the slightly smaller chart. When I updated the link in InDesign, it has been resized to 118.12%. I had to get into the x field + sign in the command bar and type 100% to get back to the level it was before.  Is there a default setting that I have to uncheck to disable this feature? If not, is there by chance a simple combination of keys that will allow me to re - scale the image quickly?

  Thank you in advance for your help!

  1. looks that you sometimes select art or thename of the link and choose "Edit original" and sometimes you just need to open art and make changes. If you say that the ID to change original it updates to the Save.

  2. There are two options, depending on version, for the behavior of repeat and scale. In CS5 (and CS4 if I remember correctly), you have the choice between them in the preferences in previous versions, it is one or the other, depending on the version. One option is to preserve the dimensions, which is wha'ts that happens to you. The other is to keep scale. Exactly how to preserve the dimensions behaves depends on it, too much on the cropping options you have used when you place the .ai file. If you cropped to aret or encompassing, for example, change the size of the art or to remove a point wandering affect art or the bounding box, but of culture media would not change.

• Where can I ask a handful of general order questions about Firefox OS as a consumer and get the answers? (a forum or something similar)

  I have about seven questions about Firefox OS. I'm potentially interested in opting for a tablet that works instead of Android or iOS. I couldn't find a place to ask questions like that. Thank you!

  https://support.Mozilla.org/en-us/forums/Firefox-OS-English-Forum

  There is another option.

• Question about the recovery partition

  Hello.

  I have a question about the recovery of HARD drive partition.

  If I do the operation to clear the hard disk option in the wizard it will remove * all * or it will keep my partition recovery in this way I can come back later. I want to know because I would like to put on a different OS.

  I know he said he would, but caution in the PDF, I found it says that on a normal recovery too (that he would remove each partition) and I'm a little confused about how the recovery actually worked.

  Thank you.

  Hey Buddy,

  To be honest I n don't know what you mean exactly with this option to erase.

  In General, Toshiba Recovery disk will wipe your entire HDD to restore factory settings correctly. This means that if you start from that disk and follow the instructions on the screen, everything will be removed.

  In addition, the recovery disk doesn t create a recovery partition. It is not available. Disk copy just the files on the second partition in folder HDDrecovery to start an installation of HARD drive recovery.