Question about cloud connectors

Similar Questions

• Toshiba 50L7335D - question about clouding and backlight

  Hello everyone,

  I read a few posts on the lighting and effects of clouding, but I was
  don't over to find a satisfactory answer. My 50L7335D Smart TV presents a remarkable
  and disappointing backlight in the top middle of the screen that is visible when the
  the screen is dark. I know it is a problem with the lcd technology, but I hope y
  is a solution

  Thanks to you all

  On my TV, I noticed that the LCD is a little more clear on the four corners, but it's not so bad.
  I think that there is nothing we can do about it.

  All we can do is to install firmware, but this has nothing to do with this issue.

• Questioning the DataCardSet members using Cloud Connector API program steps

  Hello people,

  I have a very simple question about cloud connector API. For not writing something in epic proportions, I've attached a screenshot of the issue, and a couple of issue I for its.

  I hope that someone out there has an answer.

  Thank you

  -Philippe Mougin

  Have you tried to build two programs, one with the default contact type, with the default value for the type of data card and tried to use two steps of the program?

  We have customers using connectors of cloud against data card programs.  The joint program and step (contacts and data cards) may be the cause. Try it and let me know.

  Aaron.

• Cloud connector - Contact in Eloqua is created

  I'm building a new cloud connector. I have reviewed the following doc http://img.en25.com/Web/Eloqua/EloquaCloudConnectorSampleGuide.pdf

  In the above example, the doc assumes that the e-mail address already exists in Eloqua. The cloud connector is used to get the name, the name of the database to Hoover and update Eloqua with her.

  I'm working on a connector Cloud will be slightly different from the example above.

  Cloud connector will create new contacts in Eloqua.

  The use case is as follows. (I call our environment, DB like Hoover)

  1) clients will set up a Webcast directly into our Hoover environment.

  .

  (2) links are sent directly to potential viewers by using Outlook.

  (3) viewers, will register for the event by using the sent URL. They will not go through the Eloqua Reg form.

  (4) customer will execute the webcast.

  Note: Eloqua was not used in all cases follow the steps above.

  Now in Eloqua

  (5) customer will create a program generator No. This step would use the cloud connector I build who would get a list of all users who attended the event.

  Because Eloqua was not used to send links to the Viewer, the information of Contact/emails from viewers are not present in Eloqua.

  Cloud connector will be used to create the contact information of all viewers in Eloqua uses information from Hoover.

  My questions are these.

  1. Can the connector Cloud to create a new contact in Eloqua using data since the Hoover database?
  2. Because the contact does not exist in Eloqua, should I create the contact in Eloqua and define its status as 'Complete' directly?

  Thank you

  This will help you answer your questions building Cloud connectors: what type should I build?

• Questions of the ON24 cloud connector

  You have some questions, little that can actually be applicable and able to answer by people using connectors of cloud by other Webinar providers too...

  (1) by using the register cloud connector, I notice more often, he can send that ON24 data once a day. Anyone know what time of the day it does this?

  (2) associated with #1, what happens to people who register at the last minute? They are not if is going to be in the system at the time where the stats Webinar, won't be able to connect.  I remember when I saw a demo of ReadyTalk cloud connectors, they talked about this question and said they send a different email to these people, with a direct link to the webinar, without having them to connect.  Other people do it too, or is it better to maually run the connector cloud just before the start of the event, to push these people of last minute?

  (3) I'm not the admin of On24, so this question may be basic and I hope easy to answer - the landing page on On24 standard where the connection of people and you register has the form of ON24. Obviously, I don't want to replace this form with form Eloqua? Or so people otherways to go about this?

  Thank you

  Eytan

  Cloudfeeder really does not fit in your use case. It is used when someone wants to transfer those who are not registered channel Eloqua in the system.

  It seems that On24 CloudConnector registry has a single drop further down to the amount of time that should not be in step. We feel that deleted. For now, just leave it at once a day. He will speak in the regular time.

• Question about creative cloud "individuals".

  Hello!

  Question about creative cloud "individuals".

  I'm a single trader working in Russia. I have an advertising agency. Work alone.

  Issues related to the:

  1 can be installed on 1 computer and use creative cloud 'Individuals' for commercial purposes?

  2 will. what documents I receive after payment?

  3. under what conditions, the required version of the '' Business. ''

  lol at communincate with the support of adobe:

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Hello, I have a few questions about the affiliation of creative cloud

  Hallo,

  I have a few questions about the affiliation of creative cloud:

  1. There is an Adobe offer up to 27.11. : the price offered is 47.59 euros per month including MWSt (VAT) or €568,20 / year.

  For what is this offer period/how many years valid?

  2. after the period of the offer, the membership will cost the standard-price: €59,49 / month or €713,86 / year (seen on the Adobe Web site).

  For how many years this standard - the price is fixed?

  Is the standard-prices include MWSt. (VAT) too?

  Thank you

  Thomas

  Hello

  I advise you to contact Adobe sales for queries on pricing.

  Contact us | Adobe

  Kind regards

  Sheena

• A few Questions about the creative cloud

  I read that the Creator Cloud connection will be released in the coming weeks, which is great. I have a few questions about the download file and the creative connection program of cloud.

  I have a file which I will download. The contents of this file will be updated periodically locally. I want to do the files in this folder to stay updated between my desktop and laptop. The Creative Cloud connection program will be able to do?

  If a file is changed, which is already in the cloud program will recognize the change and stay the cloud?

  I guess just a little more information on exactly what will be the program Creative Connection cloud would be nice.

  On the topic of storage I will be able to upgrade the standard 20 GB of storage that is available when / if needed? And how much will that be?

  Another question:

  When Lightroom 4 will be available via CC and why is it not available when it was released?

  Creative Cloud connection will keep files between your desktop and the Web site synchronized. You will be able to add, edit and delete files from each end and that the changes are reflected in both.

  To see the connection creative cloud in action, you can watch this video of evangelist Paul Trani Adobe http://tv.adobe.com/watch/adobe-creative-suite-6-creative-cloud-launch-week/adobe-creative - cloud - tour-/.

  There will be a way to get more than 20 GB of storage. Adobe Creative Cloud http://www.adobe.com/products/creativecloud/faq.html FAQ has a question and an answer about it down:

  Buy extra creative Cloud storage?

  Additional storage will be available for purchase later in 2012. If you have reached your storage limit, contact Adobe Customer Service.

  Lightroom 4 will be available in a few weeks. Jeff Veen also tweeted this https://twitter.com/#! / veen/status/200810541550288896. Other Articles of Jeff on what comes to the Adobe Creative cloud here in his blog of Adobe http://blogs.adobe.com/creativecloud/coming-soon-to-creative-cloud/.

• How to use String Manipulation Cloud Connector to shoot the first five characters of the field? (Expression syntax experience)

  The question

  I need to segment data on a large number of Postal Codes, usually about 400 to 600 at the same time. It is that our postcode field includes the last four digits in some cases, for example 92101-1957. When you use the Contact filter 'Value In A' I'm not able to do this 92101 *, 92102 * and of course I can't account for any combination of four numbers that might appear.

  The Solution - in theory

  The solution I came up with that is to create a new field of Contact in Eloqua 'Segmentation Zip Code' copy of the 5 digits of the postal Code field and execute segmentation using this new field.

  The Solution - Cloud Connector

  String Manipulation cloud connector must be able to perform this action - copy on the first 5 digits of the zip in the zip segment field field.

  When I'm stuck - via cloud connector

  I can't figure out how to write the syntax for expressions to search and replace. I have read the instructions of syntax and am still unable to establish exactly what I enter in the "regex to find: ' and the ' Regular Expressions to replace:

  Does anyone have expierence with an Expression syntax that might help train these expressions?

  Any ideas on other ways to address the problem would be too great.

  Thank you

  Louis

  Hi Louis,.

  Okay, I think I might know how to do it now but don't have access to Eloqua for the moment, so I'm kind of make this Store, but try below.

  Use the regex below in the "Regex for find" and let the "Regex to replace white": "."

  -(.*)$

  This will be after the hyphen and the replacement string will be empty, so I hope you should be left with just the first five digits that you can map to a new field.

  Let me know how you get on, I might be able to test myself so tomorrow so I'll see if I can make it work.

  Chris

• With the help of Cloud Connector to replace the native integration of SFDC of Eloqua

  I was discussing an idea today and I want to run it by the community here to get feedback and validation.

  We have a customer wants to integrate their instance Eloqua with a CRM unsupported by Eloqua.

  The customer likes the idea and the logic of the program generator and copy the programs that come by default with any which Eloqua instance for integration with SFDC.

  The clinet will build a service bus to manage the integration between their CRM and Eloqua.

  The question here is can the stages of the program changed to call their internal service bus using the cloud connector (ExternalService) instead of calling the natives calls SFDC integration event?

  I assume here they will build different methods in their bus server to manage create leads and contacts and update leads and contacts similar to event integration calls.

  Also here I'm not talking about the auto-synch functionlaity I just need to check out this concept and see if anyone already implmeneted before or not.

  Also, if anyone has problems with it let me know I would like to cover all the bases before going with this idea.

  I think that theoretically it should work without any problems and it is a big plus to take advantage of the use of the program generator to control the flow of the integration logic.

  Kind regards

  Nader

  The question you ask is:

  Can I use generator program and custom integrations to CRM cloud connectors.  Effectively, you need to replace the native integration API steps with no cloud to your program/middleware.

  The quick answer is Yes.   The thing to know is the number of steps (API has a limit of simultaneous connection 5 hard) and the number of API calls.   You would like to make an analysis of the frequency and volume of lead and contact updates to CRM in order to determine whether it is the right solution.  Based on the frequency and the volume you need business logic to live outside of Eloqua.  Using a middleware like Informatica product allows to build it in a workflow environment and you allows to exploit the DTS WSDL (E9) allows a high volume of documents.

  Cheers, Aaron.

• Many questions about the HP 50 g

  I just ordered a HP 50 g graphic calculator! I have a few questions about this so hang on tight! What is the USB connector on the calculator? Mini-USB, micro USB, or is it a connector owner, "custom". Then, it would be possible to connect a keyboard to the HP 50 g by using the USB Port? Is there a program that would make this possible? (I doubt it would work if you plug it..) I have a Mini-USB to female USB 2.0 connector. So I could just plug the keyboard right, provided that the port on the calculator is a Mini-USB Port. If this is not so that I could use my female to female USB adaptor to connect the keyboard.

  Thanks for your help,

  Zekelegge

  Hi!, zekelegge:

  Welcome to Forum!

  The only printer I use, 50G calculators, 48GII, 39GS and 17BII +, as well as many former models, such as the 48 s/SX/G/G + / GX, 38 G, 39 G, 42, 41 C/CV/CX and 28 C/S, is the infrared printer HP 82240 b. If you can use the emulator HP50G, on the PC, the simulator of the printer, you can download, since... http://www.HPCalc.org/details.php?id=7386

  The printer... HP 82240 B

  

  The cable series...

  

  The description... http://www.allenwan.com/hpcalcserialcable/

  The original cable...

  

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• Satellite A350D - 20K - Question about upgrade second HDD + Temperature

  I have a question about my laptop. I have notticed it is a second location of HARD disk on the bottom.
  Is it possible to use this to increase my storage?
  And if yes, how do I do that? I don't see all the connectors.
  What type of HARD drive to use in case it is possible to use this slot machine?

  My second question is on my laptop to be very hot after a short period of use.
  I installed speedfan to record the temperature. When I start the laptop, it already is between 45 and 50 degrees.
  He stayed there for half an hour and then it starts to get warmer. When I start to use the laptop for anything, it triggers to between 70 and 80 degrees.

  This does not seem normal to me. I tried to clean the vents with compressed air, but it has not made a difference.
  I searched on the internet how to take the laptop part for proparly cleaned TI.
  But I can't so I'm looking that destroy it.

  This could be the cause and more importantly, how can I solve this problem?

  Tom

  The second HARD drive bay contains the HARD drive connectors?
  If Yes, then you can use a SATA 2.5 HARD.
  If there are no connectors, then you will not be able to use the second HARD drive

  > I have installed speedfan to record the temperature. When I start the laptop, it already is between 45 and 50 degrees. He stayed there for half an hour and then it starts to get warmer. When I start to use the laptop for anything, it triggers to between 70 and 80 degrees.

  CPU and GPU produce a lot of heat. The heat dissipation is always created then there s nothing unusual that the temperature rose to higher level.
  You can change the settings in Win 7 power management. You can set the CPU to lower performance and can increase the activity of fan, which will help lower the temperature.

• Delay with Gotowebinar cloud connector records? Where is the problem?

  Hi all

  I ran a number of campaigns of Webinar recently and every time there was a delay with contacts once they land on the connector of cloud on the canvas of the campaign. In my last campaign, there was a delay of two hours. In the end I had to manually register a certain number of contacts they complained.

  Would be - anyone know if there is a failure with gotowebinar or connectors of clouds are sometimes known to do this. Also are there tricks to try to minimize the delay.

  If I can't solve this problem, I sued a different Webinar provider that cannot be a bad thing.

  Thank you

  HEY Kevin,

  (Full disclosure: I work for ReadyTalk we have our own connector).

  There are several ways that a delay may be introduced in the whole process. Without seeing your campaign, I'll just comment all.

  1. The use of the program generator will set up and artificial deadlines. If you are in normal mode, it's 15 minutes a step. I would recommend the canvas of the campaign to eliminate this type of delay.
  2. Have your segment on the campaign will cause a delay also because they need to cross a decision rule of "They did sign up?" before you get on the cloud connector. The answer here is that the form processing stage put them to a waiting time before the connector. (The step of waiting is configured pour.01 mins) It will also take forward invite since they would not be part of the initial segment.
  3. The cloud connector itself can be slow depending on the number of API calls it undergoes. W
  4. You may also have the form post directly on cloud connector, which eliminates a lot of #1 and #2 using the Repost at server stage in the stages of processing of forms. TJ fields has a document circulating here describing how to do so.

  Using our own in-house cloud connector and avoiding the #1 and #2, we see coming in under 3 minutes quite systematically confirmations. Faster if you use the post to the step of the server in the form.

  Hope that helps. Let me know if have any other questions.

• Between in contact with Stuck in Cloud connectors (update: no more)

  We have expereiced a number of issues today where contacts were stuck in cloud connector program steps, for an unusual amount of time.  Someone has seen something similar?

  By using the form submit CC, there were about 63 stuck (at least 8 hours and at a time of Contact data normalizer, there are thousands, blocked for more than 12 hours.

  Problem seems to be resolved. Members are moving now.  I'll return when they all went through stages of cc.

  Can someone tell me what went wrong, and how the Eloqua production solved?   If anything, I would like to know how to quickly fix in the case where it recurrs.