Question about connecting firewire to a LCD TV

Similar Questions

• Question about connecting to the network with a Terminal window

  Windows XP Pro, SP2, Fritz-card PCMCIA-

  Hello
  I am trying to create a connection from computer to computer by ISDN telephone line.
  I didn't install any software of specific composition, I only use the parameter of MS WinXP.
  Hardware works fine, I tested it successfully in composition in any other internet provider.

  Now I need to connect to a corporate network and they have a specific logon policy, where I need display Terminal window during the login procedure.
  So I turn on dial in properties connection on page "Security properties" dialogue box "show Terminal window.

  Problem during dial-in: the window does not occur.
  Second problem: if I go next time to this option, the input value is not saved.

  Any ideas?

  Kind regards
  Peter

  Please don't be crazy about me, but I don't see what's in your specific assignment for the Toshiba forum.

  You should speak with your company's network administrator and it should be able to help you. Otherwise, perhaps on some network specific forum you will have more chance to find what is the solution to your problem.

  If you have laptop Toshiba and everything you need for the connection works fine, I put t see to write here.

  In any case I wish good luck and hope that your network administrator will be able to help you.

• Question about connected HP

  Hello

  I posted this question in another room but thought I would repost it here.

  I bought a HP Officejet Pro 8600 Plus e-all-in-one... When I added it to the selection of the connected HP device it shows my printer and it is online but under it, it displays a yellow icon with a question mark and next to him "a problem with the printer. The printer is used with a desktop Mac Pro (12-core). Operating system Mac OS 10.6.8 and superior.

  I just install another printer, HP Deskjet 3510 series, which is listed under the HP Officejet Pro 8600 Plus e-all-in-one that is used with a MacPro laptop and it shows that the printer is ready. Also uses the operating system Mac OS 10.6.8.

  Thanks for any help on this matter.

  Hello

  Thanks a lot for the information.  I had already solved the problem and I'm running!

  I'll keep a copy of the information provided to the case where a race in another question.

• Question about connecting to the DB without earphone in Solaris

  Am pretty new to Solaris and I know how it works in Windows - please help.

  When I set ORACLE_SID am NOT able to connect to the DB, but system@ORACLE_SID works fine.

  The DB is running, logged in the same terminal SSH, tried all the upper/lower case for SID

  $ export ORACLE_SID=ORCL
  $ echo $ORACLE_SID
  ORCL
  
  $ sqlplus
  SQL*Plus: Release 10.2.0.3.0 - Production on Wed Sep 10 08:36:40 2014
  Copyright (c) 1982, 2006, Oracle.  All Rights Reserved.
  Enter user-name: system
  Enter password:
  ERROR:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  SVR4 Error: 2: No such file or directory
  
  Enter user-name: system@ORCL
  Enter password:
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  SQL> select * from v$instance;
  

  When you use sqlplus to connect to the LOCAL database (do not use SQL * Net), then you can use the same version of sqlplus that comes with the database you are trying to connect.

  You can only use sqlplus v11.2 to connect to the LOCAL V11.2 database.

  You can only use sqlplus v11.1 to connect to the database LOCAL V11.1.

• Questions about connecting to a host ESX 3.5 to vCenter 4.1

  I need to migrate 7 hosts 3.5.x ESX ESX 4.1. I did not have a test environment and will work with live on committed production systems (not clustered). vCenter 4.1 and two new 4.1 ESX hosts have been configured to handle live Vmotion (cluster will come later). I activated the license point server towards the old VirtualCenter 2.5 in the hope of being able to disconnect a host ESX 3.5 live the old virtualcenter and reconnect to the new vCenter 4.1 without rebooting the host ESX 3.5. VUM is not an option at the present time, so I intend to do a full install base upgrade.

  (1) I know that I can disconnect the ESX 3.5 server the old virtualcenter without problem. My first question is, if I try to join the new vCenter (config pointing to the old license server) box of 3.5 will be vCenter 4.1 need to install the new management agent in the box of 3.5 and therefore require the host restarts?

  (2) if the agent of 4.1 management is not installed on the host ESX 3.5, its virtual machines can be migrated (cold) to one of the new servers?

  I should add that the licenses are not a problem, we are migrating to the latest keys but have sufficient old licenses to manage the transition. The VMs are on SAN LUNs that are visible to guests old and new.

  Especially, I want to know what to expect through are exactly what will to restart is required and have not been able to locate that particular point.

  Thanks in advance.

  hensonj7

  When we went from 3.5 to vSphere, is that big of a deal.  Just disconnected the vCenter server host and updated the vCenter keeping the existing license server, and then re-attached to the new Victoria Cross.  It will establish links with the new 4.1 software, but it shouldn't require a reboot at all.  I did mine with all virtual machines out of it, but I think you can do all this live... Since a little while I did this upgrade

  -Kyle

  «"RParker wrote: I guess I was mistaken, everything CAN be virtualized"»

• A few questions about Connect Pro

  Hello. We are interested in the implementation of a Web-based solution for the webinars where make us teaching sessions (training for adults). We have an instructor who wants to do a webinar with the following requirements:

  • She wants to have a class of participants on-site, but also be able to broadcast to the users of the Web. How is that possible with Connect Pro? A webcam is stationary, so we will need to have a camera that follows she took while she speaks and that stream via Connect Pro somehow.
  • She needs to share videos with the students. What is the quality of the video shared via Connect Pro?
  • Must all participants be computer headphones to be able to talk to him? Or the microphones/speakers built into computers creates a problem of echo?
  • If it has two others who will speak at the presentation, each of them need a named license?

  Thank you for your help.

  Hopefully, I'll share some teaching experiences Connect direct and through remote sessions:

  1. A mixture of teaching can be a delicate balance. better to have someone manage the cats Q & A and fileding quesitons. There are a of highend video conference cameras that track automaticall; It can be more profitable with a real person follow his movements through the room.
  2. The shared maybe video not HD quality. Best quality captured, better they see. Overall, the video I have is at the same level as the standard web videos. Best quality will require more bandwidth.
  3. Headsets are recommended. If they use the built-in microphones, then at the very LEAST they should use headphones in order to minimize the problem of echo. If those who speak are in the room, they should certainly use helmets.
  4. No, they don't need a special license to talk. Microphone rights can be given to each participant. Presenters automatically have these rights.

  Hope these answers help.

  John Gianopoulos

  Adobe Certified Instructor

  Technical systems Métrostar trainer

• Question about CONNECTION ISDN

  Dear Expert

  I have a SX20 with TC6.0 and LINK ISDN with 1.1, I could do an ISDN can call on this voice?

  I could make a video call but cannot be called an ISDN voice, as the composition to a phone via ISDN

  Thank you

  Tung Chan

  Hi Tung,

  You should be able to receive Audio calls.

  "but he can't take the incoming call on the phone via the ISDN number" - unit to Make auto answer and see can you receive it?

  If you still have the problem then it may be issue with cofig or ISDN lines.

  HTH

  Kind regards

  Dharmmesh

• question about laptop connectivity

  Question about my laptop computer connection

  Hello

• questions about 2100 wlc and lwap connection

  Hello

  I have a few questions, I hope you can answer me.

  In fact, I have a controller connected to 3 Lwap 2100, and they are connected to the WCS. they have a static IP address.

  The distance between each point of access to more than 30 meters.

  1. the distance between the access points affect the accuracy or the stream. How can I calculate this

  2. because the APs use a static IP address, each customer should I connect to the network to add a static ip address? can I do the APs detect clients dynamically?

  I have lwapp reset guide, guide WCS configuration and configuration guide for WLC. If you have more documents or more pls share with me.

  BR

  Yamani

  Hello Ahmed,.

  Yes the distance between AP affect the wireless signal.

  to determine the best location of AP and the distance between them, as the site survey is necessary with the expert of the spectrum wireless or airmagnat...

  You can check the following links for design and RF management

  1) http://tools.cisco.com/squish/1Ea09

  2) http://tools.cisco.com/squish/51a58

  for other questions about DHCP, it is not a must that customer use static IP, you can always configure them with DHCP.

  as an extenal DHCP (like windows server), or on the WLC himself (to the title of controller-> > internal DHCP tab).

  Kind regards

  Talal

  =========
  Please note the answers that you find useful and mark as answer - when is it :-) - so that others can easily find

• Question about the connection of a customer VPN ASA

  Hi guys,.

  I have a question about Tunneling VPN. I have an ASA 5505 with static PPPoE address external and local 192.168.202.0/24 network, operates as an EasyVPN server. On the other side is an another ASA 5505 without dynamic PPPoE outside interface acting as EasyVPN customer in customer ode. The internal network is 192.168.1.0/24

  It works very well! But now, I created another user who uses EasyVPN client software to connect to the EasyVPN server. This works as well.

  But how am I able to connect customer network 192.168.1.0/24 on the connections of the ASA?

  Please give me a hint.

  "But how am I able to connect customer network 192.168.1.0/24 on the connections of the ASA?

  Yes, if you set the ACL of split tunnel correctly you should be able to connect to the remote client ASA.

  Please follow the method of configuration of Cisco doc split tunnel, at the bottom of the link.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00808a61f4.shtml

  Evaluate the useful ticket.

  Thank you

  Rizwan James

• Question about the need to connect every 30 days...

  I understand the need for CC programs to connect to license Adobe servers, every 30 days (or it's 99, since I have an annual license?) of re - check license status.  That said, I have a question about the timing of these connections the licence renewal.

  What happens if I happen to be disconnected so far here 30?

  With the help of Microsoft for example...  I need Visual Studio to reactivate my developers license every 30 days in order for me to develop applications Windows 8 'metro '.  If I happen to be disconnected so far here 30, I am unable to work on any apps 'metro' until I got online.  (And I don't see any way to tell him to reactivate at the beginning).

  What happens with Adobe CC?

  Suppose I have license, and I am online for 29 days.  Then, the 30th day, I find myself be in offline mode when I start one of the programs of CC.  Now what?  Does the 30-day clock 'reset' every now and then during this time, or is it really only try every 30 days, and I have to be online on that day?

  Hi kenbrody,

  Please see the thread: http://forums.adobe.com/thread/1190831 .

  Kind regards

  Romit Sinha

• Satellite A300 - question about the MIDI connection

  Can someone help me?

  I have a computer laptop satellite A300 and want to connect it to my computer to stream TV and movies.
  I don't see where I would plug MIDI to my computer.
  Is it possible to do with this model?

  If not, can I get a plug that would stretch the capacity of the computer or I have to get a new computer?

  Thank you
  Carol

  Sorry, but I m confused
  You said you want to connect the Satellite A300 to a computer
  Is this correct?

  You can connect two computers via a LAN cable. But I have no idea why you talking about connecting MIDI (Musical Instrument Digital Interface)

• Questions about TV Tuner Satellite A500/040

  Hi all

  I'm new to the Tuner of TV analog digital hybrid and I'm sorry if my questions seem as stupid.

  I have two questions about the of digital TV Tuner analog integrated hybrid in the Notebook Toshiba Satellite A500/040. My understanding is that the TV tuner hybrid integrated able to decode TV signals high definition and their display on TV via its HDMI port. I wonder if I could watch TV shows on your laptop without connecting to a TV. If so, is the software needed? There are several USB TV tuners for desktops and laptops on the market, A500 hybrid TV tuner works differently these USB TV tuners?

  Thank you

  Young

  > I think I know that the TV tuner hybrid integrated able to decode TV signals high definition and their display on TV via its HDMI port.

  N ° this s tv tuner not a HD!
  It s a digital tuner that provides digital video signal 576i and not 1080i.

  Of course, you can use the HDMI port to connect the laptop to the LCD HDMI port but you will not get the quality video full HD as blueray for example.

  I found this Australian page from Toshiba:
  http://www.MyToshiba.com.au/products/notebooks/satellite/A500/psam3a-04000e

  You will find this passage short text:
  + With tuner TV built-in, you can even watch analog or digital TV everywhere where you travel, while the HDMI ports make connecting high definition on your TV screen and sound system. +

  You can also watch TV on mobile phones display! It's a key reason why the TV tuner built in ;)

• About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  Hi Michael,

  If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

  One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

  

  Content

  To manage this content, you are currently subscribed and changing your preferences, select the content.

  Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

  You can select to terminate a subscription to a thread.

  

  Learn how to manage your subscriptions

  Take care.

• Many questions about the HP 50 g

  I just ordered a HP 50 g graphic calculator! I have a few questions about this so hang on tight! What is the USB connector on the calculator? Mini-USB, micro USB, or is it a connector owner, "custom". Then, it would be possible to connect a keyboard to the HP 50 g by using the USB Port? Is there a program that would make this possible? (I doubt it would work if you plug it..) I have a Mini-USB to female USB 2.0 connector. So I could just plug the keyboard right, provided that the port on the calculator is a Mini-USB Port. If this is not so that I could use my female to female USB adaptor to connect the keyboard.

  Thanks for your help,

  Zekelegge

  Hi!, zekelegge:

  Welcome to Forum!

  The only printer I use, 50G calculators, 48GII, 39GS and 17BII +, as well as many former models, such as the 48 s/SX/G/G + / GX, 38 G, 39 G, 42, 41 C/CV/CX and 28 C/S, is the infrared printer HP 82240 b. If you can use the emulator HP50G, on the PC, the simulator of the printer, you can download, since... http://www.HPCalc.org/details.php?id=7386

  The printer... HP 82240 B

  

  The cable series...

  

  The description... http://www.allenwan.com/hpcalcserialcable/

  The original cable...