Questions about connecting to a host ESX 3.5 to vCenter 4.1

Similar Questions

• Not able to connect to the host ESX 3.5 by VC so customer VI

  The host ESX 3.5 has been disconnected from the VC, and we are not able to connect customer using VI as well. The virtual machines on the host are running without any problem.

  Got the message when tried to restart/start services of Mgmt. below

  # Service mgmt-vmware restart

  stopping VMware ESX Server management services:

  VMware ESX Server Host Agent Watchdog

  VMware ESX Server host agent

  Starting VMware ESX Server management services:

  Agent Host VMware ESX Server (background)

  Availability report startup (background)/etc/init.d/mgmt-vmware: fork: Resource temporarily unavailable.)

  # Start of Service mgmt-vmware

  From the VMware ESX Server management services:

  VMware ESX servre Agent Host (background)

  Availability report startup (background)

  status of service mgmt-vmware #.

  VMware-pass is stopped

  hostd.log - entries

  /etc/init.d/sshd command failed

  Didn't the /etc/init.d/sshd fork: Resource temporarily unavailable.

  Let us know the fix for this problem other than restarting the host.

  To know how to clean it, please read KB1007887 - defunct cimservera of process on VMware ESX 3.5 hardware management agents run and follow the instructions.

  André

• Questions about patching a single host

  I'm our first update of one of our 5.5 guests since it was originally installed (long term).  I searched and was not satisfied with the responses, but just to double check: there will be compatibility issues with all our guests on VMware ESX host Agent 5.5.0 build-1331820 and it is updated with ESXi550-201410001?  (VMware KB: VMware ESXi 5.5, Patch version ESXi550-201410001).  I ask this for reasons such as HA, vMotion, etc..  (I realize that VMs can run on hosts as long as the hardware compatibility is supported, but my question is specific to the pieces of automation, or any other traps).

  In addition, the fix can be installed and then restarted later, or is a reboot required during installation?

  Thank you.

  Edit: also, that most prefer, using the update or the command line manager?

  No problems with HA or vMotion for hardware versions are the same. I usually leave a host or two in production for a day or two for the patch test before spending the rest of the guests. You will need to restart after the patch.

  VUM(Update Manager) every time. It automates the entire process and if you have one, use it.

  If this answer was helpful, please mark it as such.

• Question about connecting to the network with a Terminal window

  Windows XP Pro, SP2, Fritz-card PCMCIA-

  Hello
  I am trying to create a connection from computer to computer by ISDN telephone line.
  I didn't install any software of specific composition, I only use the parameter of MS WinXP.
  Hardware works fine, I tested it successfully in composition in any other internet provider.

  Now I need to connect to a corporate network and they have a specific logon policy, where I need display Terminal window during the login procedure.
  So I turn on dial in properties connection on page "Security properties" dialogue box "show Terminal window.

  Problem during dial-in: the window does not occur.
  Second problem: if I go next time to this option, the input value is not saved.

  Any ideas?

  Kind regards
  Peter

  Please don't be crazy about me, but I don't see what's in your specific assignment for the Toshiba forum.

  You should speak with your company's network administrator and it should be able to help you. Otherwise, perhaps on some network specific forum you will have more chance to find what is the solution to your problem.

  If you have laptop Toshiba and everything you need for the connection works fine, I put t see to write here.

  In any case I wish good luck and hope that your network administrator will be able to help you.

• Question about connected HP

  Hello

  I posted this question in another room but thought I would repost it here.

  I bought a HP Officejet Pro 8600 Plus e-all-in-one... When I added it to the selection of the connected HP device it shows my printer and it is online but under it, it displays a yellow icon with a question mark and next to him "a problem with the printer. The printer is used with a desktop Mac Pro (12-core). Operating system Mac OS 10.6.8 and superior.

  I just install another printer, HP Deskjet 3510 series, which is listed under the HP Officejet Pro 8600 Plus e-all-in-one that is used with a MacPro laptop and it shows that the printer is ready. Also uses the operating system Mac OS 10.6.8.

  Thanks for any help on this matter.

  Hello

  Thanks a lot for the information.  I had already solved the problem and I'm running!

  I'll keep a copy of the information provided to the case where a race in another question.

• Unable to connect to a host ESX with PowerCLI

  Guys,

  I had no problems to connect to the VC in my environment using PowerCLI.  However, every time I try to use connect-viserver

  I get an error message saying my password or user name is incorrect.  I'm using the credentails root FRO the host and I know there OK but I can not just to connect.

  Anyone has any ideas what is wrong?

  Use unique addition does not double quoutes (""). They have the same meaning in the context of PowerShell

  Here's your solution:

  $pass ='! ITAdminE$ X 4!'

  Kind regards

  Nedko Nedev

  PowerCLI development team

• Question about connecting firewire to a LCD TV

  FireWire can be used to connect to a screen LCD TV(for movies)? For sound or / and video?

  Hello

  I'm not sure, but I gues he won´t be able to do, given that firewire was essentially intended to connect firewire for data transfer devices high together.

  If you want to learn more, check out this site-online http://en.wikipedia.org/wiki/FireWire

  I guess that it s not able...

  Welcome them

• Question about connecting to the DB without earphone in Solaris

  Am pretty new to Solaris and I know how it works in Windows - please help.

  When I set ORACLE_SID am NOT able to connect to the DB, but system@ORACLE_SID works fine.

  The DB is running, logged in the same terminal SSH, tried all the upper/lower case for SID

  $ export ORACLE_SID=ORCL
  $ echo $ORACLE_SID
  ORCL
  
  $ sqlplus
  SQL*Plus: Release 10.2.0.3.0 - Production on Wed Sep 10 08:36:40 2014
  Copyright (c) 1982, 2006, Oracle.  All Rights Reserved.
  Enter user-name: system
  Enter password:
  ERROR:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  SVR4 Error: 2: No such file or directory
  
  Enter user-name: system@ORCL
  Enter password:
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  SQL> select * from v$instance;
  

  When you use sqlplus to connect to the LOCAL database (do not use SQL * Net), then you can use the same version of sqlplus that comes with the database you are trying to connect.

  You can only use sqlplus v11.2 to connect to the LOCAL V11.2 database.

  You can only use sqlplus v11.1 to connect to the database LOCAL V11.1.

• Question about support of Ubuntu host platforms

  According to the user's guide, the latest version of vmware server-supported Ubuntu is 8.04, which becomes a bit long in the tooth.

  -Are there a plan in the near future to support a newer version of ubuntu?

  -people run vmware server 2 on the latest versions of ubuntu without any significant problems?

  Hello

  You must run vmware server 2 on Ubuntu 8.04 without problems. It works very well because it is fully supported.

  Anyway people running vmware server 2 on Ubuntu 9.04 and 9.10. It is not supported and sometimes some questions (weird), but it should work.

  If you want to install vmware server on ubuntu 9.04 or 9.10, I recommend you visit the "VMWare server 2 install problems" section in this post.

  Hope this helps

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• A few questions about Connect Pro

  Hello. We are interested in the implementation of a Web-based solution for the webinars where make us teaching sessions (training for adults). We have an instructor who wants to do a webinar with the following requirements:

  • She wants to have a class of participants on-site, but also be able to broadcast to the users of the Web. How is that possible with Connect Pro? A webcam is stationary, so we will need to have a camera that follows she took while she speaks and that stream via Connect Pro somehow.
  • She needs to share videos with the students. What is the quality of the video shared via Connect Pro?
  • Must all participants be computer headphones to be able to talk to him? Or the microphones/speakers built into computers creates a problem of echo?
  • If it has two others who will speak at the presentation, each of them need a named license?

  Thank you for your help.

  Hopefully, I'll share some teaching experiences Connect direct and through remote sessions:

  1. A mixture of teaching can be a delicate balance. better to have someone manage the cats Q & A and fileding quesitons. There are a of highend video conference cameras that track automaticall; It can be more profitable with a real person follow his movements through the room.
  2. The shared maybe video not HD quality. Best quality captured, better they see. Overall, the video I have is at the same level as the standard web videos. Best quality will require more bandwidth.
  3. Headsets are recommended. If they use the built-in microphones, then at the very LEAST they should use headphones in order to minimize the problem of echo. If those who speak are in the room, they should certainly use helmets.
  4. No, they don't need a special license to talk. Microphone rights can be given to each participant. Presenters automatically have these rights.

  Hope these answers help.

  John Gianopoulos

  Adobe Certified Instructor

  Technical systems Métrostar trainer

• Question about CONNECTION ISDN

  Dear Expert

  I have a SX20 with TC6.0 and LINK ISDN with 1.1, I could do an ISDN can call on this voice?

  I could make a video call but cannot be called an ISDN voice, as the composition to a phone via ISDN

  Thank you

  Tung Chan

  Hi Tung,

  You should be able to receive Audio calls.

  "but he can't take the incoming call on the phone via the ISDN number" - unit to Make auto answer and see can you receive it?

  If you still have the problem then it may be issue with cofig or ISDN lines.

  HTH

  Kind regards

  Dharmmesh

• Run the host ESX 4.1 in vCenter 5.0

  Hello everyone, I have a simple question.   I am running 4.1 U1 ESX hosts and vCenter 4.1.  I need to upgrade to ESX 4.1 U2.   I know I need to improve my vCenter to match my version of ESX host, but I thought I killed a stone 2 strokes.   I have the license for vCenter and ESX 5.0 but I'm programmed to upgrade next year.   Given that I have to upgrade my vCenter anyway can I go to version 5.0 and run my ESX host on v 4.1 U1 without any loss of functionality?

  I would like to upgrade everything at once, but the company needs me to complete the test first upgrade of the host is not an option at this time.

  Thanks for your help with this.

  Hello

  You shouldn't lose any features with what you described.  Remember however that in one year, you will still need to patch vCenter to upgrade to the latest version 5.x.

  Thank you

  Jeff

• Question about the balloon pilot

  Hello

  I have a question about the balloon pilot in ESX/ESXi 4.x. When the pilot is "inflated" the reason is to reveal to the ESX host memory of comments in fact is not used and that memory could be recovered by the host. However, the driver must be loaded all the time for this memory to be used by the host, as in giving him another VM?

  Or is it just inflate and deflate so and there is no need to stay charged?

  Once that memory has been retrieved the pilot deflates on its own.

• Problem connecting vSphere client to a host ESX or ESXi to

  I have tried with an ESXi host so an ESX host.  I spent the installation on a square between hypervisors, as well as to try on another box.  I have redownloaded the two hypervisors and check that they match checksums, I reinstalled the customer charge downloads of both vSphere host as well as the www.vmware.com/downloads.

  Whenever I try to connect to a host, I get the same error.  First of all, I get:

  Error analysis of the file "clients.xml" Server "192.168.2.195".  Logon will continue, contact your system administrator.

  After clicking on OK, I get this error:

  The initializer for type for 'VirtualInfrastructure.Utils.HttpWebRequestProxy' threw an exception.

  I would appreciate a suggestion or an explanation of what is the question.

  Thank you!

  edited for spelling.

  This is not a problem with the server on the host, there more IE7 problem. Check the 1011329 of Vmware KB

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1011329&sliceId=1&docTypeID=DT_KB_1_1&dialogID=27182245&StateID=1%200%2027180582

  AM,

  If you have found my reply to be useful, feel free to mark it as useful or Correct.

  The latest articles and articles about Virtualization:

  http://communities.VMware.com/blogs/amodi

  http://vsolutions.compare2shop.com

• question about laptop connectivity

  Question about my laptop computer connection

  Hello