Question about connector Bluetooth internal on Tecra 8100?

Similar Questions

• Max Mem internal for Tecra 8100?

  Hello

  I recently bought 2 256 MB memory modules for my Tecra 8100. In the manual, it said that 512 is the maximum for this type.
  But when I install my laptop modules does not (screen remains black).

  What should I do to let my laptop use 512 MB mem?

  Kind regards

  Raymond

  Hi rplenter,

  It's just what you say. The Tecra 8100 can handle memory of 512 MB. What modules do you use?

  I have 2 256 MB of Toshiba (PA3051U-1NME) running Modules

  Good bye

• Question about X 240 internal battery

  Hello I'm new here.

  I bought a 240 X and when I was selecting options, I don't think I'm going to need the extra battery life so I don't choose NO internal battery.

  My question is - is it possible to install an afterwords of battery internal?

  Thank you

  Hello and welcome

  Yes, I hope so, it's possible.
  Buy the batteriy and install it yourself even if it is not a replaceable unit. Or get in touch with the Lenovo official service provider.

  Lenovo service 23 integrated Wh battery for x 240 p/n (FRU) is 45N1109 (Sanyo) or 45N1111 (Sony).

  Follow the instructions below for disassembly and laptop battery installation:
  http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/x240_hmm_en_sp40a26001_02.pdf - Hardware Maintenance Manual
  http://lenovoservicetraining.com/showcase?sid=493&key=TGVuZw== - video service

• Wireless rookie - question about mesh wireless internal

  I was asked to help set up a wireless network for a medical center. We have a lot of time before its opening, then it's time to test. I would like to recommend some sort of redundancy between the AP in this time, it will take about 16 to cover the area. Being a medical institution, if a resuscitation access point fails, better if the client devices connect to another. My question, am I right to say that we need a controller to achieve? I built and installed the wired LAN, so here's my chance to build my skills wireless

  Thank you very much

  Ray

  The best way to build redundancy into your wireless infrastructure is to use a concept called "microcells". By installing more APs to the smallest power of radio, you have the luxury to increase the signal strength of nearby access point if it does not. Consider the alternative, which is to install less APs 100% power, but if we fail, you cannot increase the power of APs nearby.

  Now, a controller can adjust automatically is close to the levels of power of the APs when it happens, but it can be manipulated manually in a stand-alone environment.

  Finally, if you have already installed a wireless to 100% of power infrastructure, you can install redundant APs in a standby mode. AP backup monitors the active PA, and it lights up immediately if the active access point fails. You must usually install these APs right next to those involved.

  Regardless of the redundancy used, customers will see a hiccup in service when the AP goes down. This can be avoided, if the new access point roaming must be extremely fast. This will only affect you if you are using time-sensitive applications, and even in this case, it might not be noticed.

  I hope that helps! Let me know if you have any questions.

  Jeff

• Question about the extended international warranty for Qosmio F10

  Friends
  I bought a Qosmio F10 of UAE UNITED and it came with an international warranty of 3 years and its expiration time, December 12, 2007.
  I would like to know if someone has purchased an extended international warranty for Toshiba Qosmio F10 model.
  Please give me the details where can I buy the extended warranty.

  Concerning
  PVSRAO

  Hello

  Did you know that the Web of Toshiba Europe site?
  If not, then please visit this site:
  http://EU.computers.Toshiba-Europe.com

  You will find many interesting areas and in respect of the Services, you will find all the information on the guarantee of the uprisings, service and extensions.
  Generally each service partner Toshiba should be able to also give the warranty information and there, you could also buy extensions.

• Question about Toshiba Bluetooth stack V.4

  Hello

  We have a laptop Fujitsu Siemens P7120 requiring the Toshiba Bluetooth stack located at http://aps.toshiba-tro.de/Bluetooth/pages/download.php

  When we install it in silent mode, installation occurs however the Bluetooth does not initialize to the exchanger of information Toshiba Bluetooth is launched!

  Is anyway to complete installation without this another step?

  You must use the BT-stack of the FSC. I also tried to install an OEM version of the BT-stack from Toshiba, but in this case, there was limited time. So check the item of menu "in context" to get further details.

• Question about Toshiba Bluetooth Stack & Bluetooth Dongle

  I was just assuming that I can use the software Toshiba for a bluetooth dongle? If Yes, how can I make sure Toshiba is used and not XP?

  If you use a BT dongle, which came with the BT-stack from Toshiba, then it is no problem at all. If it was delivered with any other BT-stack, then is will very probably work too, but limited time only (30 days). If you install the battery Toshiba BT then the MS stack will be hidden and the Bt-stack from Toshiba is active by default. If you remove the
  Toshiba BT-stack then the MS stack becomes active when MS - SP2 is installed.

• a question about hard drive internal

  How long can last a hard drive inside without using it?

  also

  is it possible to connect the internal hard drive externally?

  ______________________________________________________________
  If my answer was helpful please click the star of "Bravo."
  If your problem is resolved please click the button "accept as a Solution.

  Internal drives will last longer, then the primary readers because they sleep (the arm gets parked and the tray stops spinning) when they are not accessible after a time. How ever the grease in the bearing dries up from the heat of the laptop, which causes them to fail.

  You can connect via USB with an external hard drive caddy. Make sure you order SATA 2.5 inch.

  Here's just one example, it is the one I use.

  http://NCIX.com/products/?SKU=42781&VPN=NST-210S2-BK&manufacture=VANTEC

• Question about the Bios Tecra 8100 2.5

  Hello
  I installed the latest version of the Bios on my tecra 8100. My Question is, what is the maximum size of hard drive for these phones? Now I have 13 GB hard drive, but I want to have a bigger. And 512 MB of Ram is the maximum, right (2x256mb)? Can I adjust the size of the videoram?

  In my view, the tecra 8100 is a laptop very well.

  Greetings,
  Stephan

  Hi Stephan

  You are absolutely right. 512 MB of RAM is max for this pretty portable. If you want to buy more RAM I will suggest you that a PC100 256 MB (PA3051U-1NME). This RAM is tested and working properly with your device.

  Sorry, but video RAM is not possible to extend. And now something on the HARD drive. Unfortunately there is no documents where you can find information like this, but I know very well that here should not be a problem with 30 or 40 GB of HARD drive.

  I wish you lots of fun with this laptop old but nice.

• Question about CPU on Tecra 8100

  Hello.

  I think I bought the toshiba tecra 8100 on summer (when I had the money), but I have question. What is this laptop processor?
  I read it as 600 mhz, 700 mhz, 800 mhz and 850 mhz, but what really are? Or it's possible overclock via the bios etc?

  Hello

  I Don t understand the question is what a laptop processor. It s the thing that makes your 'computer' computer or think. No matter what.
  The speed is set in Mhz, so it depends on the model how Mhz, the processor of your machine has.

  The exact clock speed is written on the label on the bottom of your machine. You can also try CPU - Z to determine the exact speed of your processor.

  And NO, not possible to overclock the CPU of machines it s.

  Welcome them

• Tecra 8100 memory module questions

  Does anyone know if the ram PC133 144 pin for the Tecra 8200 can be used in the Tecra 8100? I think that the Tecra 8100 usually takes PC100 144 pin but I'm having a hard time getting suppliers to tell me about the PC133 so (probably because it is half the price).

  Hello

  The Tecra 8100 uses these memory modules:
  PC100 256 MB (PA3051U-1NME)
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)

  Also check this site:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7446&ft=m&St=3

• Ask questions about the HP Pavilion 14-V041TX Bluetooth

  Hello, sry for asking questions about simple things.

  How to activate bluetooth for laptop HP Pavlion 14-V041TX?

  Or how to bluetooth to detect other bluetooth devices?

  coz already try to use my smartphone, but cannot detect any bluetooth device or laptop.

  for what I know, I already install the driver for bluetooth.

  Maybe there's another driver, that I'm missing?

  Thank you.

  SRY for my bad English.

  HI @Ton1_qrenz ,

  Welcome to the HP Forums!

  It's a great place to find answers.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  No worries about your English.  I believe that I understand your question, and if not, you can specify if you must post back.

  I understand that you are unable to detect Bluetooth devices.

  Here is a document to help you with this company. There are links that it contains other documents that can also be of assistance.

  Understand and troubleshoot Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP)

  If the problem persists, try the following steps.

  Step 1. Go to Device Manager
  Step 2. Right click on "Bluetooth device" you want
  Step 3. Select "update driver software... »
  Step 4. Choose "Browse my computer for driver software".
  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
  Step 6. Select "Ports (COM & LPT)"
  Step 7. Select "Microsoft" to the list of "manufacturers".
  Step 8. Finally select "Standard series via a Bluetooth connection.

  If you are unable to connect to a Bluetooth device, try the following:

  Step 1. Search for 'Change device' in the start menu in Windows 8.
  Step 2. Click on where it says change device installation settings.
  Step 3. Select No, let me choose what to do option.
  Step 4. Check the automatically get the device app option
  Step 5. Click on save changes to save the settings that you select

  So, you can try this

  Step 1: Go to RUN (Windows Logo + R) and type "services.msc" and Enter
  Step 2: Now find 'Bluetooth Support Service' and double click it
  Step 3: Now click on the Log on tab and type "Local Service" without the quotes
  Step 4. Click on "account".
  Step 5: Now remove any authorization of passwords the password field blank
  Step 6: Below the upper left title should be a hyperlink 'Start' click

  You can also view tab management power and unchecked the box "Allow the computer to turn off this device to save power."

  If it is still not resolved, I suggest contacting HP support for further assistance.

  Please contact our technical support at the 800-474-6836. If you are outside the United States / Canada region, please click the link below to get help from your region number. Phone goes everywhere in the world

  Good luck!

• Mouse Microsoft bluetooth arc (grey), questions about the reconnection

  Hi all

  I recently bought mouse arc Microsoft Bluetooth (new ERM one) to use with mobile society.

  I have a Lenovo T430s laptop, with windows 7 Professional.

  I have properly matched and works very well, however, when I turn off the mouse, when I turn on the PC, when you turn things on (working from that day is), mouse work / connect.

  IV ' e to manually remove the device and coupled again, then it works fine.

  You have no work around? Bluetooth is 4.0

  Thank you

  Carlo

  Hello
  Welcome to the Microsoft community. Sorry for the delay in responding.

  If you bought this Arc Touch Bluetooth mouse then I would like to inform you that it is perhaps not compatible with Windows 7 because it uses Bluetooth 4.0 technology. This could lead do not save the settings of the mouse and you will have to reconfigure again.

  How to check your device to see if it'sBluetooth active 4.0

  Additional information:
  Troubleshooting: mouse

  How to contact Microsoft if you have questions about your hardware device.

  Hope the information is helpful and let us know if you need additional information. We will be happy to help you.

• Question about cloud connectors

  We try to create a cloud to Eloqua connector. I read the CloudConnectorSampleGuide. I have a few questions about the expected data models and models of general implementation.

  Configuration of the connector of the cloud

  • The CC stores the identification information for each configured CC step Eloquya Eloqua?
    • What are the guidelines for the safe password storage? (I can't store the passwords as dirty one-way-hash that I need the password during execution.  The two-way hash gives an illusion of security but is not better than the plaintext).
  • When the CC is configured, where credentials should take place between the 1st and the 2nd screen? (i.e. as a hidden form field, session cookie cookie/etc.)
  • Eloqua warns the CC when a step is deleted?

  Cloud connector performance

  • What is the average number of steps configured Single that manages the CC?
  • Is it possible for a CC to have 1000 s and unique not configured to query?
  • What are the guidelines for scalability when the connector has to travel 1000 steps configured and survey? The CC requires a worker architecture to manage a large number of configured steps?
  • Are there best practices around the CC recovery hangs
    • For example: CC acquires the State waiting for members and moves to the current State. The CC blocks before the end of the stage. What is the approach suggested for

  recovery of the tasks in the current handling during recovery state? (assuming I have multiple instances of CC of the Eloqua poll). Is the connector of cloud supposed to maintain States of WIP to manage recovery correctly?

  Dmitry, once again, it is entirely to the developer.  When you add contacts to a stage, they will be processed in batches.  There is no limit to how much you add, and since they are left to step up to that dealt with by the connector, how long they sit depends on how long your connector takes to do its job.  Expectations, of course the faster you can deal with the best.

• Question about temperature internal Satellite A300 ND1

  Hello

  I have a question about the temperature of the standards it of ok for my laptop and what is the normal temperature and how can I keep it low?

  Thank you.

  Hello

  It's not easy to say what a normal temperature could be.
  The temperature is not always the same and it depends on the use of the laptop.
  Usually, the temperature would increase while gaming or running applications high performance. Why? Because all devices such as the CPU and GPU would focus the heat dissipation and this leads to a higher temperature.

  > How can I keep it low
  Very simply, you can keep still low level, but you can make sure there is enough free space around the laptop to ensure good air circulation.
  Also don t use the laptop on your knees etc in order do not obstruct cooling fans.

  It s also advised to clean the fans from time to time using the jet of compressed air. These sprays are really useful and could buy in the stores of different computers.