Question about creating a diagram of flow/tape combo in a FMS dashboard

Similar Questions

• Comments and questions about the mixture ADF Page flows with Trinidad UI

  Hi all
  
  I did a few tests to see how possible it is to use Trinity to the UI (for compatibility of this stinking IE 6) as well as the ADF Page flows / controller of the ADF. My question is whether there is a sustainable configuration from the point of view of Oracle. I did things to make it work and noted the following interesting behaviors (call anaomalies, if you wish):
  
  (1) addition of ADF Page Flow within the reach of the technology for a project automatically adds ADF Faces. If I try to eliminate ADF Faces of the scope of technology, it automatically deletes the flow of Page of ADF as well.
  
  (2) if I remove the ADF Faces DURATION 11 project library and create a page of trinidad (also set up the renderkit and as appropriate skin and remove a moment-false ServletADFFilter of web.xml) I get errors MDS when running the resulting page. I can't correct the error by removing the MDS libraries either - as soon as I put ADF Faces DURATION 11 library back, things are OK.
  
  (3) since I've faced ADF in my scope of technology, all newly created JSPX pages end up having af:document / af:form tags and have the namespaces implemented for ADF Faces. Not useful if I want only parts of Trinidad, but not a show-stopper, either.
  
  (4) an interesting thing that I have reported before... If I have the ADF Page library flow into my project and then configure navigation case in faces-config. XML (I know, wouldn't do that, just an observation, even if someone who has accidentally library ADF Page Flow in their project without any intention to use the ADF Page flows will find this very annoying to debug...), the first click of button that leads to the navigation works very well. All subsequent navigation requires two clicks on the link/button to trigger navigation. This behavior does not occur if you change the case of navigation to redirect = true.
  
  So, in summary, I seems to be the controller of flow/ADF Page ADF working with Trinidad, with a few minor problems of productivity due to an obvious requirement to have the Library Runtime of ADF Faces and the extent of technology ADF Faces included in my project. Now Oracle - is this going to be a sustainable configuration?
  
  I'd also appreciate comments, suggestions and comments from anyone else who has tried or is trying to use the ADF Page flows / ADF controller with a single user Trinity interface (well, in my case, I'm going to blur more using the tag af:template with components of the Trinity, but it's another whole story).
  
  Best,
  
  John
  
  bump #2

  + 1). Adding the ADF Page Flow within the reach of the technology for a project automatically adds ADF Faces. If I try to eliminate ADF Faces of the scope of technology, it automatically deletes the flow of Page of ADF as well. +

  ADF task flows have to ADF Faces e around. Not sure this is documented somewhere, but I hope it's

  (2) no idea about it

  + 3). Since that I've faced ADF in my scope of technology, all newly created JSPX pages end up having af:document / af:form tags and have the namespaces implemented for ADF Faces. Not useful if I want only parts of Trinidad, but not a show-stopper, either. +

  Looks like that is facing an emergency room to have an option in the dialog creation page if create an ADF or page of Trinidad. I'll take a note

  + 4). An interesting thing that I have reported before... If I have the ADF Page library flow into my project and then configure navigation case in faces-config. XML (I know, wouldn't do that, just an observation, even if someone who has accidentally library ADF Page Flow in their project without any intention to use the ADF Page flows will find this very annoying to debug...), the first click of button that leads to the navigation works very well. All subsequent navigation requires two clicks on the button/link to trigger navigation. This behavior does not occur if you change the case of navigation to redirect = true. +

  I'm not sure how to restrict we are on the "do not use" them in combination, but to me this looks like a bug.

  Frank

• Question about creating a recovery (file system) USB flash drive

  Hello and happy new year to all, (I'm from greeece, sorry for the mistakes of language possible)

  (Pavilion dv6-6c01ev - Windows 7 Home Premium 64-bit - bought 08-21-12)

  I want to create a USB stick recovery, and I just bought a USB flash drive 32 GB 3.0 for this reason.

  I've never done it before, but I have read how, according to the this page.

   

  My question is:

  What file system must be the USB key, before the decision-making process? FAT32 or NTFS ?

  Bought, thati USB file system is FAT32 by default.

  I already read that on the page above: 'a message of Recovery Manager opens indicating that the flash drive will be formatted. Click OK to format the USB key and continue. »

  but I would like to have, and a more definite answer from someone who knows better.
  

  So, does change the NTFS file system.

  or should I now start the manufacturing process of the recovery USB flash drive as it is (FAT32)

  Thank you for your help

   

   

  I have already created the recovery USB flash drive, and formatted Recovery Manager the disk before the process,

  and at the end, when the recovery files was written and verifyed.

  I look at the file system of the USB flash drive, and it's NTFS...

  I worried for nothing...

  Thans anyway...

• question about creating virtual disks on my MD3220i

  I create a virtual disk where I put a SQL Server and it asks me to

  Choose the type of virtual disk IO characteristics. The file system (typical), database, multimedia and Custom options.

  I think the selection of data because it is a SQL Server. However I'm not sure because I have not much of

  experience with this. My question is that one should choose or perhaps not even matter?

  Thank you

  Being that the VD will be strictly for SQL, then you can go ahead and select the database option. Any other time, you must select the typical option. Please let me know if you have any questions or concerns.

• Question about creating view

  Hi all

  for example, I need to give permission for a user that has select permission on a table, but I need to hide certain columns in the table for that user.

  I know for this application there need create a view and assign the columns needed to this point of view, then give

  access to select this point of view of a user.

  My question is: this view will affect anything if I create? He will take the tablespace volume?

  Or there is no effect and I can create?

  the table to which it is necessary to create point of view is very large.

  
  

  A view is nothing else than a stored query, so no, it's not going to take place to create, with the exception of a very trivial amount of space in the data dictionary to store the definition.

• Question about creating a footer

  I don't know if this is the right forum to ask this question, but I was wondering how the footer of the site of the day has been made: http://www.miltoncantellay.com/index.html#top

  The 'back to top' button with scrolling up is really cool and I would just intergrate into a site, I'm currently trying.

  Thank you!

  Its righteous way anchors.

  http://TV.Adobe.com/watch/Muse-feature-tour/Muse-create-anchor-links/

  On the example site, the object is pinned at the bottom too - http://www.adobekb.com/building_your_first_website_pt07.html#pinning

  Thank you

  Vinayak

• Question about create Dimension

  Hello
  
  I read the document Oracle Concepts and on page 4-22, he presented a statement of 'CREATE the DIMENSION' used to create the "customers_dim" dimension in the example schema SH.
  
  The presented statement is:
  

  CREATE DIMENSION customers_dim
     LEVEL customer IS (customers.cust_id)
     LEVEL city IS (customers.cust_city)
     LEVEL state IS (customers.cust_state_province)
     LEVEL country IS (countries.country_id)
     LEVEL subregion IS (countries.country_subregion)
     LEVEL region IS (countries.country_region)
     HIERARCHY geog_rollup (
       customer CHILD OF
       city CHILD OF
       state CHILD OF
       country CHILD OF
       subregion CHILD OF
       region
    JOIN KEY (customers.country_id) REFERENCES country )
    ATTRIBUTE customer DETERMINES
      (cust_first_name, cust_last_name, cust_gender,
      cust_marital_status, cust_year_of_birth,
      cust_income_level, cust_credit_limit)
    ATTRIBUTE country DETERMINES (countries.country_name);

  When I published the statement above (Word for word on the document), I got the following error:
  

  SQL> @customers_dim
  LEVEL customer IS (customers.cust_id)
        *
  ERROR at line 2:
  ORA-30371: column cannot define a level in more than one dimension

  I found the following using Google:
  

  Cause:     A column was used in the definition of a level after it had already
          been used to define a level in a different dimension.

  But I do not see how the cust_id is to define a level in several dimensions. There is probably a trivial error somewhere, but I don't know enough yet about the dimensions to understand.
  
  Help is appreciated, thank you,
  
  John.

  Hi John,.

  There is probably a trivial mistake somewhere

  Yes, probably the dimension itself already exists:

  select * from all_dimensions where owner = 'SH';
  

• Question about creating Toshiba recovery disks

  Hello

  I wanted to know if I create recovery discs, it will have my drivers wireless, video and sound on it, or I have to download again on the Toshiba site.
  Thank you, jane

  Post edited by: ukgal

  If I get a windows 8 CD and install on my computer would be my work of drivers audio, video and wireless, or I have to reinstall again?

  Hello Jane

  When you create the recovery disc, saved on your laptop recovery image will be copied to the disk. This recovery image contains the operating system, all the drivers necessary, Toshiba specific tools and utilities, and also some additional software.

  Windows 8.
  Please, let us know what model of laptop you have exactly and what you want to do exactly. WIN8 update maybe?

• question about creating a recovery disk

  Hello!! I have a question to make a data disc for my system recovery using the integrated into the software of hp, I have wifi and I am always connected are no pluged son in my system for the internet, but I read somwhere that I must disconnect from the internet before taking to the top of the cd, can I just do without blocking down on my router and modem in the other party in my house , I have other computers using this...

  Yes thank you Ol Man... I'll do it...

• Questions about creating a list of directories.

  I am aware that it is possible to create a list of directories and how to add items to the list in Windows Explorer.

  One of the points that I would like to add is the type of Compression that is displayed in the details pane of the properties listing of image files.  So far I could not find a way to do it and apparently no printed programs and list directory available (the least the ones I tried) will be either.

  Any suggestions as to how this can be done will be appreciated.

  Ray,

  Please contact the Microsoft Community.

  I wish that post you your query in TechNet for assistance more-

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  We know if you need help.

• Question about creating discs of recovery on the new desktop

  you just bought a 8 hp pav p7.1003wb office gig / 1 TB hard drive. Windows 7-64 bit, that I will need to make recovery disks because they are no longer included.

  should I have separate recovery of my regular backup discs? and what is better to use ie., cdr - rw, flash drive, and it should be 1 TB? I have a 16 GB flash stick that I currently keep my personal files. I looked at a few external drives too and just confused myself as to what I need. Currently, I got for my old desktop (a gateway 2001) which came with recovery disks and then I would back up all the files that I had to keep on my flash stick.

  I'm sorry I'm a little computer illiterate, and I can't follow the rapid technological change and hope someone can explain to me on my level... Thank you!

  hanj454,

  Part 1, the medis recovery was a very simple question:http://support.hp.com/us-en/document/c01867124

  Please be advised that it is not on DVD + R media. Shouldn't RW.

  Part2, backup: you can keep it as simple with copies on important files flash drive.

• Question about VCS 7.1 Media flow-thru

  We currently have a way to call that looks like this:

  Endpoint (SIP and H323) > VCS control > VCS - E (SIP and H323) neighbouring area > firewall > neighbouring area to the CUBE (NOT only).

  When the VCS-E they interact SIP to H323 he directed media flow-thru allowing traffic through the firewall because it proxies all media and signaling.  However, if the call all the way SIP, it will proxy the call signaling but not the media.  Right now, we have it working, but we need to convert SIP H323 calls then back to SIP for it to work.

  Is there a way to force the VCS-E to proxy all media to the CUBE, rather than some media of interoperability calls?  I know it's usually what a crossing area is for, but AFAIK that does not work when you use CUBE to VCS-E.

  VCS - E has obviously the hardware capacity and processing to do this (because he now works via workarounds) so I hope that there is a way I can do a little more cleanly.

  Hello Nick!

  I don't know your deployment, especially when you run a nearby area of the

  VCS - c to the-e probably works, but you should know how it behaves for really knowing why

  to use it, and a hack so save licenses is often not the best starting point.

  You can configure the routing of locking media which will link the media to the vcs-e.

  (this may not work with all types of areas, at least all the profiles of the area, but at least it does with custom)

  *h xConfiguration Zones Zone [1..1000] Neighbor SIP MediaRouting Mode:
  "Specifies how the VCS handles the media for calls to and from this neighbor, and where it will forward the media destined for this neighbor. Signaled: the media is always taken for calls to and from this neighbor. It will be forwarded as signaled in the SDP received from this neighbor. Latching: the media is always taken for calls to and from this neighbor. It will be forwarded to the IP address and port from which media from this neighbor is received. Auto: media is only taken if the call is a traversal call. If this neighbor is behind a NAT the VCS will forward the media to the IP address and port from which media from this zone is received (latching). Otherwise it will forward the media to the IP address and port signaled in the SDP (signaled). Default: Auto"
  

  You must find the area id, then enter in the tsh - cli (admin ssh access):

  (replace with your number)

  xConfiguration Zones Zone Neighbor SIP MediaRouting Mode: Latching

  There are other options that might be of interest as setting routed to this area for ever,

  interwork or custom zone settings options, I would recommend that you're looking for by using the command line and Administrator's guide

• Question about creating report guests editor BI when it connects directly to the database?

  Hello

  I create a report of BI Publisher using direct SQL server database. JDBC connection is created, then datamodel and report.

  The report is parameterized. Now I have attached the dashboard report. But now the settings are not filling. So I intend to create guests, but it is the search for field. But I don't use of RPD. So, how can I create guests when we creating BI publisher report connecting directly with the database? Please let me know.

  Kind regards
  Sam

  Hi Sam,

  I hope you got your answer for that starting from the thread OBIEE quick dashboard for BI Publisher

  Thank you...

• Question about creating your own custom mouse clicks

  Greetings,

  I'm curious to know if custom mouse clicks are limited to a stage of 50x50px?  I was going to change any of the existing clicks of mouse 80x80px argue, but thought that someone else has probably played with that and could know if it will work on top of their head.  The existing mouse clicks are barely noticeable when you are working in a large format.

  Thank you

  Randy

  Yes, what I then play with the action of real click that appears under 'Show mouse click' custom.  I tried last night with a larger swf of the click of the mouse to 80 x 80 I created in Flash and it worked like a charm.

  Thank you

  Randy

• a question about creating index on the view

  Hi all
  
  I had a problem on the creation of an index on the view
  
  create index sys_ixf_viewpnuc_03 on view_pnuc (ugcode | privatenum);
  
  It's the sql I've run pl/sql
  
  the result of the server is:
  SQL error: ORA-01702
  01702 00000 - "a view is not appropriate here.
  
  Thanks for giving me a helping hand
  
  TKS

  Hello

  You can not use the index on the view...

  better, you can create a view with the best of the select statement with the specified indexed column...

  Since then, the view is nothing other than a select statement. If any changes in the index, alter in the table and create a consequence of the view...

  canno't ' t you create an index on a view except the materialized view

  Kind regards
  Deepak