Question about deleting and adding a node

Similar Questions

• About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  Hi Michael,

  If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

  One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

  

  Content

  To manage this content, you are currently subscribed and changing your preferences, select the content.

  Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

  You can select to terminate a subscription to a thread.

  

  Learn how to manage your subscriptions

  Take care.

• Question about business and Service of Proxy

  Hi friends,
  I have a question about services and proxy services business IE I need to find the time it takes to call an operation on multipoint business of proxy service, how can I do in oracle service bus (OSB)? You can help quickly

  If your question is only about the performance analysis,
  try to activate the 'monitoring' on the 'operational' of the Service Proxy Service/Company tab.
  For the Proxy Services, if you activate at the level of the 'Action' you get a lot of information about each individual action in a power of attorney.

  See http://www.javamonamour.org/2011/06/osb-profiling-your-proxy-service.html

• Questions about the management of specific nodes in different hierarchies

  Hi all

  I have a question about the specific management of some particular set nodes, which are located in different hierarchies within a same version.

  I want to know if there is any editing made to certain properties of these specific nodes or if the nodes are deleted/moved/edited approval to be triggered for the data manager.

  or should not allow users to edit (adding/moving/deleting/changing property values) or those specific members.

  
  

  According to my understanding of the nodes of domain prevents the removal of nodes, but I don't want my Member prefix/suffix, domain is the only way to prevent the change.

  
  

  
  

  
  

  Thanks and greetings

  Madhu
  

  We have an obligation to not allow a node to remove or deleted without the approval of the admin, so I created a Boolean property AllowDelete is false, which is substitutable, default and is available only in a category of property Admin, for which most of the users do not have access.  Then, I created a validation of PropRemove with an error message that tells the user to contact a user admin to remove or delete the node.  The admin can change the AllowDelete to true, then can either remove himself or to allow the user to do.

• Bluetooth mouse does not work up to this that deleted and added after Windows startup

  After you have added a device, namely my mouse Logitech V470 Bluetooth, it works fine until I turned off my laptop.

  The next day when I have power to the top of the mouse is no longer my Dell Vostro 1500, moves the cursor. But it is still displayed in the list of devices.

  The only way I can get it to again control must "remove hardware". Then I 'add device', it is discovered, and the driver is loaded.

  The bluetooth mouse works normally.

  What can I do to have the mouse early control after turning on the laptop?

  Hi John,.

  Thanks for the reply.

  Are you able to connect other Bluetooth devices to your computer properly?

  V470 works not

  http://forums.Logitech.com/T5/mice-and-pointing-devices/V470-not-working/TD-p/551070

  My V470 Mouse Laser wireless Bluetooth does not work

  http://Logitech-en-AMR.custhelp.com/app/answers/detail/A_ID/20491/kW/connection%20V470

  If you still experience this issue I suggest you to post the question on the Logitech forums. You can contact them on the link below.

  Logitech forums

  http://forums.Logitech.com/

  Feel free to write us if you have any other questions about Windows.

• Windows 7 starts questions about mac and office 2010 following an installation

  It's a long cut as short as vent. I've been miss sold a record of upgrade of windows 8 full disk-shaped, with norton and office 2010. My goal of creating windows on my mac for a course I'm taking. After that know I need windows 7, I bought it online. I created a partition of 80g on my mac charge windows 7, then norton. Until I loaded the office that I was invited to perform the update from apple in the windows software 7. Note before I installed norton, I load boot camp mac utilities according to the instructions. So, followed by all as should be. The prompt update from apple was quick time, iTunes and airport, I checked all and then updated. Then I loaded office 2010 and obtained throughout the process from the Microsoft site. On the last part of the installation, the installation failed due to a mistake of hanging iTunes. I tried again and again, I fixed the update to iTunes to add and remove the section of windows. Then, I got different errors. I decided to remove the whole score without uninstalling all programs again. When I get to the windows live, that this falls priming. I get various error messages whenever I try to start the process. As a header of Bank pool, fatal error and so on. Can anyone help? What is the damage?

  Hello

  Thanks for posting your query in Microsoft Community.

  Because the question is limited to Windows 7 on your Mac with Boot Camp, I suggest you contact Apple Boot Camp support for assistance.

  http://www.Apple.com/support/Bootcamp/

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Question about snapshots and virtual machines

  Hi all

  I have a small question about snapshots. I use VMware for about 6 months and I read about snapshots and how they work but still have a question to make sure that I understand how it works and it will work the way I think it works.

  I have a Windows 2003 server, which is a virtual machine. I have an application that uses MSDE database. I want to upgrade the database to MS SQL 2005, but to do this I need to back up the MSDE database, uninstall MSDE, and then install SQL 2005 and move the SQL database. This happens on the same VM.

  What I was thinking if I well Snapshots correctly is to snap turned the virtual machine before doing anything. Then do my upgrade steps and see if everything works. If its all messed up so I should be able to return to my shot and everything should be the way he had. What is the good? One of the main reasons I moved the server VM was because of this upgrade.

  After reading the documentation for the snapshots, it's how I undestood it. Pretty much any change could be reversed with snapshots. I wish just they had put in a few examples in the PDF file. Also it would be the same for all type of grades of the OS? Could I snapshot a Windows 2000 Server, and then "in the upgrade of the square" to Windows 2003? I've cloned a VM to do this but was curious about whether snapshots would be just as easy.

  Thanks for your help.

  Hello.

  What I was thinking if I well Snapshots correctly is to snap turned the virtual machine before doing anything. Then do my upgrade steps and see if everything works. If its all messed up so I should be able to return to my shot and everything should be the way he had. What is the good?

  That is right.

  After reading the documentation for the snapshots, it's how I undestood it. Pretty much any change could be reversed with snapshots. I wish just they had put in a few examples in the PDF file. Also it would be the same for all type of grades of the OS? Could I snapshot a Windows 2000 Server, and then "in the upgrade of the square" to Windows 2003? I've cloned a VM to do this but was curious about whether snapshots would be just as easy.

  Exactly the same thing for the upgrades of the OS.

  Perhaps the most important thing with the snapshots is to keep an eye on them and don't let them sit too long or become too big.  You have described the use cases are very good uses for snapshots.  Just make sure you have a solid plan with a schedule set, so that you can come back or validate changes before the snapshot becomes too large.

  Good luck!

• Question about CR and LF

  Hey guys,.

  Quick question on LF and CR. As you can see I'm LF and CR of writing to a text file and because directly.

  

  However, I don't get the CR at the time where I read it. Why is this? Is it because Windows ignores the CR?

  Thank you

  Hi dora,

  read the Help for the WriteText function.

  There is an option for handling of CR/LF characters and explained mentioned in the "Advanced" section of the article for help!

• Question about deleting of the LDAP user and integration

  In the Document "Management Console Help", he States:
  
  "You can't invite accounts of users that are mastered in a user directory LDAP; These accounts are created automatically when you synchronize the LDAP directory. »
  
  This means that after you configure an LDAP domain, the users specified by the filter should be automatically attracted to OnTrack? I don't see the ldap users during execution of an empty search for the administration console. At this point, I can also connect to the OnTrack using a valid LDAP user. I was trying to see if OnTrack worked similar to the Complutense University of MADRID, where the OnTrack user account would create once the user logs in the application.
  
  What I can do, is go to "Create a user" and enter a valid ldap user's email address. then I see this user in the full search. This user can also connect successfully.
  
  I wanted to know what was the expected behavior: it should be a 'register' required ldap users in ontrack before auth in the app? Is there a synchronization process that must be executed to pull in the ldap users?
  
  Also, is it current best practices of removing users? I see in the administration console there is a note that says: "Note: removing users is not supported."
  
  As always, thanks for the info!
  
  
  Thank you
  -ryan
  
  Ryan Sullivan | ECMconsultant
  http://www.ecmconsultant.NET/
  

• M30-832: Questions about memory and DVD player

  Hi all, new to laptops up to have a few questions! First of all, I have a Satellite M30-832.
  1. He has on the dvd player on the side of the Compact disk with re-writable below image and sign dvd R/RW under. That means it is a DVD burner as well? It does not sem to recognize blank DVDs and I was under the impression that it should be possible to write about them!

  2. can I upgrade the memory with memory DDR - RAM modules or does take a special type? And how to change them!

  Thank you very much

  Hi Richard,

  From what I can find your M30 832 is equipped with a DVD burner so you should be able to burn DVDs (the specification says you can only burn at X 1 speed for DVDs).

  You should be able to update your RAM to a maximum of 2 GB and I recommend you buy a quality mark to avoid any problems. Your user manual should have details on how to change the RAM modules, but generally it will be to remove a panel of access (usually on the bottom of the unit) and then releasing it two clips (one on each side of the RAM modules) plastic spring-loaded and gently raising the output modules.

  Please make sure that you either wear a wristband anti-statuc dirt or this earth you yourself before accessing RAM modules. They are very sensitive to electrostatic.

  You can find suppliers of RAM suitable if you GOOGLE 'M30 832 RAM.

  HTH)

• Question about phone and / or Android 1.5

  I have a question or a statement that needs confirmation. If someone could be good enough to help out I'd appreciate it.

  I am a heavy Texter and text on a daily basis, probably an average of about 250 + texts per day. Also, I noticed and I took County, after about 4 hours of texting the android keyboard and also the swype keyboard, affecting the time key to key response starts to slow down and get slow and ultimitely is unbearable to the text with. Even with the home screen and sliding screens from left to right, and as I said it doesn't happen only after some hours of use of the phone. So, I have to restart the phone and repeat for it keep to become lazy and unbearable to text with. I usually reset every morning or when I wake up. This is nothing compared to my sisters Mytouch, which is in fact older than my phone, it can affect his day at the time and not get done with the delayed touch response. I also noticed that his phone is running Android 1.6.

  Now my concern is, if I'm the only one knows this or is it due to a defective phone. What is the Android obsolete 1.5 that many people are talking about who is performing on the phone in this way.

  Basically, it's because of 3 things.

  1. history - more history, more than it takes to load. (If you wipe all messages and try again, you'll see what I mean)

  2 android 1.5 - don't know what the reason, but even on 1.6 devices SMS language delay is AVERAGE less.

  3 Swype - if you have enabled, it tends trolling more than the default android.

  It is not your phone, it's all phones Cliq/Cliq XT... 1.5 hate text messaging.

  In addition, your phone will work more effectively without a task manager. They are nice to have if you need something CF or to extend the life of the battery (no), it actually takes your phone like some processes that would otherwise, and you also have the risk of frost on the phone all together because some group programs are essential and cause the home screen all recharged after their closure. I would like to refer to this site in order to better explain.

  http://tiny.cc/00s5a

• A few questions about LabView and (fairly complicated) thermocouples

  Hello, I intend to read [this is only 16] 20 thermocouples (type K - in data acquisition, assistant it is J but it will change soon). I use two devices, usb-6008 and usb 6251. I had a BT program (see table below) and I have some questions/statements that need to be confirmed:

  1. I plugged my devices, put DAQ Assistant on the Panel, the temperature chose->-> K thermocouples and I scored channels by dragging a slider 'clicked' on all channels. So now I'm able to read all channels, right?

  2. I have added a few thermometers and digital indicators with them to have an accurate reading of thermometers in digital data.

  3. I've read a few articles on tracing multi channels on a single diagram of wave and I want to apply to my program. Basically, I don't know how to run, I need to make a table and plug it on the graph of the wave. The thing is, I don't know how to do it.

  4. I would get 1 sample per second 1, I added the delay time = 1000ms. Unfortunately, DAQ Assistant says it works like 1 k samples by 1 Hz.

  I am quite fresh in LabView and currently I view tutorials and other things. I would be grateful for advice.

  BTW, I can't test if it works with thermocouples connected because I don't have at the moment and the place where I would be able to test the program has very limited access

  
  

• Question about Java and other concerns

  It was in the original thread Java, decided that it should be easier in the separate thread.

  A simple uninstall will get rid of Java, or leftovers to stick around. After picking up the Live safety scanner fake Trojan or whatever it is, I did some scans online in addition to MMFA, who got rid of him in a quick scan and SAS, and Windows Defender. You don't know if AntiVir would be cleaned, but MBAM it in the short term. Thought I was clicking on a secure link, but I learned enough here to start in Safe Mode, run MBAM, and WD of Tower and Windows Security Center and return to normal. Somewhere along the line, I received a few Java mentioned error messages. Think that I tried to download ot and run an online scan, but can't remember for sure.

  Moreover, somewhere I took advice of Prime Minister, which seems to be a malicious ad-ware and pest stealing information data. I deleted the program. It does not appear on all analysis, but there is an entry in WinPatrol in Services, where it shows up as being disabled. He also appears in the Services in Task Manager, where it shows stopped. Don't know what I can do to get rid of it completely or if it anything wrong at this point, if it is disabled.

  Dale,

  even if java uninstaller leaves behind some errant registry entries, I don't know that it's worth trying to go after them.   [For example, I found a Web page since java itself which talks about how to change the registry in case"Java icon is still visible in the Panel hasthat almost have Java is uninstalled".   [I have purposely not cited this link here, because I don't recommend editing the registry and don't want to be responsible for all the problems if they try to do.]

  ---------------------------------------------------------------------------------------------------------

  "I've learned enough here to start in Safe Mode, run MBAM, and...". »

  Note that MBAM is designed to run in NORMAL mode, in order to be able to find and conquer the malware that is resident / operation of the system RAM.   (By starting in safe mode, this malicious program does not work often and if MBAM won't find it in memory).   In fact, the only time where we should try to launch WHAT MBAM in safe mode is when he is unable to run in normal mode.   And now, with MBAM Chameleon, it is even less likely that MBAM will be prevented from running normally.

  In this sense, MBAM takes a very different from other security programs philosophy, that often MAKE application users run in safe mode.

  And as you have seen, MBAM focuses on 'rogue' malware that other products do not detect or do not remove properly.   For a person to "do-it-yourself", it should be the first scanner that you run when it encounters a thief.   [Of course, to "do it yourself", you can only exacerbate existing problems... so you must proceed with caution.]

  -----------------------------------------------------------------------------------------------------------

  Somewhere along the line, I received a few Java mentioned error messages.

  Was it a message 'error', that Java was "defective"?   Or was it just a notice that you visited a java requiring site, which he could not find (active) on your system?

  -------------------------------------------------------------------------------------------------------------

  Regarding the Premier's Opinion, I would be concerned that "it also appears in the Services in Manager tasks, where it shows stopped.   [I am less concerned with what appears as 'disabled' in respect of the services of WinPatrol, as sometimes, after deleting a program or a service, it may still appear as a service disabled in WinPatrol.   But in this case, WinPatrol should indicate that the (local) file is not found.]

  But as I am not familiar with this particular program, you can either wait Bugbatter you answer here, to see what she suggests... or if you're in a hurry, you can follow the instructions at http://www.spywareinfoforum.com/index.php?showtopic=79038 to sign up and post the logs requested to SpywareInfoForum.com; There are experts here AIDS that can 'walk you through' procedures to analyze your system and clean the infection.   Any help provided that it is FREE.   If you decide to go to help them, please wait for a response, and do NOT attempt to perform any other scans to remove yourself – do exactly as they ask you to do, no more, no less.  

   

• Questions about Norton and Windows Defender

  OK, I trust Norton. But not for a 64-bit windows defender when Norton is 32-bit.

  I have windows 8 previous release a 64 bits. So make me doubt Norton except where I work

  with internet explorer on desktop check and scans all deletes cookies and so forth, but when work with window 8 Norton security app does not resemble control anything.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/Norton-Internet-security-and-Windows-Defender/761d5aff-382e-46d9-b9f5-f65178b83d91#LastReply

  These are forums for Vista, and you have Windows 8.

  I'm moving your question on the Forums of Windows 8.

  XP, Vista and Windows 7, Windows Defender is an Anti-Spyware application and Norton disables that Norton has its own Anti-spware application and advocate the 2 would cause problems if they ran together.

  BUT in Windows 8, Windows Defender is an anti-virus program and you should not install Norton as well.

  Only have AN anti-virus program installed.

  See you soon.

• question about SQL and VMDK places

  Hello world. Im kinda new here so please be gentle

  I'm confused on the locations of the files for sql.

  At this moment I have 1 with 3 vmdk files sql server executes a muscular 100 GB sql database.

  My disks are as follows

  1 OPERATING SYSTEM

  2 DB

  3 newspapers

  They are all thick and they are all stored with the virtual machine in the virtual machine configuration.

  It lies in a cluster HA/DRS and we use them both.

  The question boils down to performance.

  If my VM is stored on DATASTORE_A and the VM folder on this data store has all the VMDK files in it, it would be safe to say that they are all on the same disk as much as vsphere is concerned.

  Now to get best performance, I want to separate my VMDK files to separate data (with faster operation) warehouses to avoid conflicts of drive on my current data store. What is the right way to go about this?

  How separate you your VMDK to other data warehouses, and enjoy other performance data store? WE do not use DTS at all so im sure it although we use HA/DRS in our group... and yet, I don't think that it is important in this case... just more of an FYI.

  What do you do to get your SQL servers to run in vmware?

  Seems like a basic question.

  The answer seems easy. Separate disks so that they do not fight.

  'S virtually done it with VMDK but the data store underlying is 1 speed and they all exist on this subject, so... How to separate them at that level for best performance?

  Also... once I keep them separated, how can I keep my sanity by knowing my VMDK are not with the virtual machine? This kind of made a mess . Of course the performance takes a front seat for my mental health.

  Thank you all

  1. If I sVmotion my other vmdk files via the advanced options of one in another data store, it will create the files folder structure based on my VM name and place the vmdk inside?  (I guess I could just test it and see).

  Yes, the VM configuration file (.) VMX) will be modified to point to the new location of the virtual disk. You can use the virtual machine property editor to check for this, once the Storage vMotion.

  2. with regard to the disk controller, I assume you mean a virtual controller by VMDK in the vmx / correct the settings of the virtual machine and not a phyical on the hardware controller? (IM pretty sure I know the answer here but I just want to be clear).

  Yes, the virtual controller is correct.

  If so, what type of controller? LSI Logic or it would benefit all a paravirtual adapter?

  As long as your operating system is supported, go with the PVSCSI every time - especially for newspapers and the controller file data.