Question about Dell OEM: SLP Windows 7 Installation disk domestic; can it be installed and activated on other computers from Dell?

Similar Questions

• No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  Hello

  Know what type of network card you have and download the drivers of its supplier.

  It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Can I sell my windows 7 home basic to others that I have installed and activated?

  I bought windows 7 Home Basic SP. 1. I sell my windows 7 home basic to others that I have installed and activated?

  I want to buy the new windows and I used the update because I want a simple process. The upgrade procedure needs more, not simple.

  Can the buyer install it and activate it to his computer?

  You say you have this:

  "Home Basic 7 Sp 1 64-Bit English 1PK DSP OEI DVD 611 SEA"

  Did you read this part?

  These versions are for small integrators (DSP = 'partners in enforcement service'), which usually contain a single Windows (1pk = 32-bit or 64-bit, not both as in commercial versions) and an OEM preinstallation kit to preconfigure Windows and/or integrate additional tools (OEI = 'Installation of Original equipment' or 'Integration organizational environment'). They have the same limitations that versions OEM = license is tied to the computer where the operating system has been installed initially and not transferable in case of death of the machine.

  If you want to move or to sell the license of operating system or upgrade motherboards in a computer, buy a license at retail in the future.

  See you soon.

• my laptop displays windows is installed and activated but when I go to use powerpoint, he asks a validation of key that when I get home he tells me is not valid

  my laptop displays windows is installed and activated but when I go to use powerpoint, he asks a validation of key that when I get home he tells me is not valid

  Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010.

  If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  Full license:

  http://support.Microsoft.com/kb/823570

  Get the key;

  http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520

  If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:

  http://support.Microsoft.com/kb/2002262

  Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs

  http://support.Microsoft.com/kb/927921

  Error message when you start an Office application after installing a suite Office: "invalid product key".

  http://support.Microsoft.com/kb/836178

  If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:

  Run the patch tool mentioned in the article below to uninstall Office 2010:

  http://support.Microsoft.com/kb/290301

  Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.

  http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

  http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx?CTT=1

• Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers.

  Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers. Now, I can't download the programs that are supposed to solve the problem! including FoxFire

  Try to download from this site:

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

• Question about the license of Windows Vista

  Hello. I didn't know where I should post this. I have Windows Vista, I purchased an upgrade. My question is, "I am allowed to install the software on a friends computer. Because I don't need the software, can I sell the software. I know that Microsoft has its policies, but I don't know what they are. I don't want to do something that I'm not supposed to do.

  Thank you.

  Original title: Microsoft Software
  

  Hello

  You posted in the appropriate Forum.

  Yes, a retail upgrade license can be transferred, as long as it is removed from where it was originally installed.

  One license is for a SINGLE Installation.

  ___________________________________

  These are the General rules for OEM and retail licenses, which can also help you in the future:

  If the machine came with the preinstalled Windows operating system (Dell, HP, Acer, etc.), this product key supplied with the laptop is preinstalled OEM license and is not transferable.

  OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.

  Only retail Operating System license that you buy and install yourself, are allowed to be transferred to another machine.

  And retail licenses also can be installed on a machine at one time.

  See you soon

• Question about Dell backup and recovery Premium

  Always looking for a conventional way to save the Tablet (5130) and have the ability to start in an environment of recovery and restore from a backup. Did anyone tried B & R Premium? Supposedly will do exactly that... Anyone can shed some light? Thank you

  Personally, I wouldn't. I'm sure it works fine, but Vista and Windows 7 recovery options are always in Windows 8.1.

  You can perform a recovery USB flash drive to reset your device to factory (out of the box) standard in Windows. (A 8 GB flash drive works.)

  You can save an image of the entire system of external storage such as a USB 100 GB HDD or more.

  USB recovery installs a Windows recovery with multiple options environment. These include repair the disk image partition recovery on the Flash DRIVE itself or the hard disk recovery partition, if that partition has not been removed (to leave a space after creation of the USB flash drive - it's an option which is offered), or recreate the entire disk to a system image on an external hard drive attached.

  Boot from the work of USB flash drive made in the same way using a DVD or a CD bootable in previous versions of Windows. He gets the familiar environment of the recovery and begins asking for details on your keyboard.

  A few steps are required, and you must remember to MAKE backups (or schedule backups in Task Scheduler to make repetitive.)  Windows 8 will only create a backup on a small external hard drive (say 100 MB) and it will crush whenever a backup is performed. On a much larger hard drive, it will use up to 30% of the hard drive space and keep as much imaging system as possible, and then replaces the oldest with the most recent. In other words, you can keep multiple images on a 1 system external to you on a 100 GB external. (That would be about 300 MB of images of system on the 1 TB).

  If you want to try this (and why not, it's free, assuming you have already a flash drive and an external USB hard disk) at the start of this way.

  Create the key USB recovery flash. Charms blow and to search for the exact phrase "recovery disc". Select 'Create a recovery disk.' In the dialog box, check [] copy the recovery partition from the PC on the recovery disk"(if it is not grayed out, in other words).  Run through this process and you'll find yourself with a flash drive bootable USB able to mount a rescue environment.  (You may need to go into BIOS and set up the drive as your first boot device to test.)

  Create a system image for backup of the entire hard disk by hitting swipe in charms and by searching for the exact phrase "file history". Select "Save backup copies of your files with the historical file." This page takes a while to load. When loading, find "Backup of System Image" in the lower left corner.

  Are there disadvantages of this report to the use of the Dell premium service? There must be or they wouldn't charge it. I have not studied on this subject (because I'm old and stuck in my ways, and I stick to what works for me), but I imagine that it automates things a bit and has an element of cloud backup.  It can even happen transparently in the background. I do not know.

  In any case, Bob, I hope this helps.

• Questions about the OEM upgrade repository 10.1.0.4 to 10.2.0.1 db in

  Hi all
  
  Since we installed the 10g grid control in Windows 2003 server who and the agent have been upgraded to 10.2.0.5 see below:
  
  D:\Oracle\Ora10g_GC\agent10g\BIN > emctl agent status
  Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
  Copyright (c) 1996, Oracle Corporation, 2009. All rights reserved.
  ---------------------------------------------------------------
  Agent version: 10.2.0.5.0
  Version of the WHO: 10.2.0.5.0
  Protocol version: 10.2.0.5.0
  Agent home: D:\Oracle\Ora10g_GC\agent10g
  File binary agent: D:\Oracle\Ora10g_GC\agent10g
  Agent process ID: 2460
  ---------------------------------------------------------------
  Agent runs but not ready
  
  The repository db (on the same server) stayed in 10.1.0.4 so we tried to upgrade this db. This is the step we did:
  
  (1) installed oracle 10.2.0.1 in a new oracle home.
  (2) listener configured in this new database using the port 1522
  (3) Ran pre upgrade util: utlu102i.sql
  (4) Ran oracle dbua new home
  
  Looks like that the upgrade is executed successfully with the exception of the configurations of EM.
  
  Name of the step name log file
  PreUpgrade.log pre successful upgrade
  Oracle Server Oracle_Server.log successful
  Oracle_Server.log Oracle Workspace Manager successful
  Post PostUpgrade.log successful upgrade
  EmConfigUpgrade.log Enterprise Manager Configuration Failed *.
  Generate the successful generateSummary.log summary
  
  My questions are:
  
  (1) what does this failure?
  (2) how can I fix this?
  
  Thank you very much for your help in advance,
  
  Shirley

  EM is not configured for this database

  Which points to the control of stand-alone database (dbconsole). I'm not so familiar with DBUA, it could be THAT DBUA try to configure default dbconsole. But you have not need of a database repository gridcontrol, still more, such a data base should not have a repository dbconsole. So you can ignore the error message.

  He is the agent who speaks with the WHO and the repository database, so you should follow the instructions in the present note metalink inform the agent about the changes:

  How to: change the listening Port of the database that contains the repository of grid control
  DOC - ID: 369997.1

  Werner

• Question about the OEM version and it is allowed.

  Original title: win7 oem

  I bought computers from our provider of professional it services installed win7 and win8.1. While they inspected the CD cover license, the license is OEM version. I asked our computer service provider and he said if we buy a computer that comes pre-installed with a BONE, it's not serious. Please confirm what I already paid for the license keys.

  You can legally use a PC with a pre-installed Windows in any environment version: Office, home, football club, anywhere.

  If I understand correctly, the OEM licenses are sold to manufacturers to use for a large number of PC. They are not transferable. If your computers are transferable OEM licenses whereas they are probably pirated. After a while, they are likely to become invalid.

• A few Questions about the advanced Actions window

  Hello

  I have a few questions about the progress of the Actions (using the version of track CP7)

  1. What is the function of the action to "continue?"   Out of the peak action and advance the playback cursor?

  2. What does mean this comment "Nested calls to action advanced is a nice improvement."? Is the advanced decision at the top of a page of action tabs?

  3. What is the function of the option "custom" in the IF statement - "preform action if - custom", it doesn't seem to do anything for me?

  4. where can I get information about the timeline / playhead interaction with advanced actions, i.e. where the playhead is going again at the beginning of the slide. slide custom question - display button, e.g. verification of responses, comments - when all the objects are at the beginning of the timeline. I'm looking more for the read head of infromation functionality rather than how to implement this type of question.

  Thank you

  Donal.

  Continue: If an advanced standard action is triggered by a button, this will not trigger the playback head. If you want out, you can use continues. Continue can also be a choice in a conditional action, when one orders branching has nothing to special, but in advance. Continuous is also the "dummy" statement/command (this is the official name of a line in the dialog box advanced actions) If a statement has become unusable due to some reasons, it will be replaced by continue

  There is no nested call stocks advanced possible right now, one of my many feature requests. It would be sort of a subroutine that you can use over and over again, instead of having to create each time when necessary.

  A decision is one of the conditions to be an advanced conditional action. They allow to create more complex actions, as a loop or arrays are not possible. All decisions are executed in sequence and always.

  Custom: is a combination of or but it is rather limited, because you cannot use parentheses.

  I guess you'd better visit my blog if you want to learn more about the advanced actions.

  http://blog.lilybiri.com/

  I also did several Webinars on stocks advanced, last this afternoon (on the sharing of the actions) for Adobe. They are all available on request.

  Lilybiri

• Clean installed and active Windows 8 signed me off every 10 Minutes guest "you are about to be signed within 30 seconds.

  Hi all

  I have reinstalled Windows 8 on one of my Acer laptop which came with OEM Windows 8. Because the key Embedded BIOS, install never asked for a key. After you have installed the wireless network driver, the computer is connected to the internet and glass get immediately activated. However, the system alerted me 'You are about to be signed in 30 seconds' shortly after and rebooted itself.

  I guess it was because that the limitation of the inactive windows (when I connected first of all, I have not get Windows activated due to no internet), so I let it reboot and continue to play with it. But the reboot thing won't go away.

  One thing is that when the system first rebooted itself, no installation or major update does, so I guess that nothing dangerous is done.

  Someone met with such a problem and how to fix it?

  Thank you

  I tried to restore all starts and start services gradually from the clean boot state.

  What is interesting, is that, after all what can once again, the system is absolutely fine.

  I guess the question was because of the activation process, or a problem a start-up program or service such as a fast storage intel, content etc.

  Thanks for the help, I think I should be fine.

• Reinstalling Windows without installation disks

  Let me clarify some things that I think are made:

  Laptop = ideapad z575 which is a windows 7 64 bit computer.

  Windows wouldn't boot because it has an error since avg and update wondows - avg seem to be ashamed that their driver is the last show at startup but remove avg then showed another driver and it all points to a depth of problem.
  In short, I feel that a reinstallation is the best way forward.

  I saved my data sisters so happy to do a quick format and reinstall of windows 7 - have the serial number sticker, but no disk I do not think that it shipped in all.

  I didn't modify all partitions, but using a utility disk in the back that I was able to access it via the standard boot drive I can put another active partition... now to return back I had to create a bootable utility that I made from USB, it also allows me to inspect the readers through a windows interface.

  So I am here and able to do a lot in the back through my USB. I saw and was able to run a recovery program that is located on one of the partitions. But he told me that something was friends with readers and I think it's because of my defining a different partition as the only active.

  What is the next best step for me it feels exaggerated do not use partition lenovo gave to reinstall windows, hoping I wouldn't need browse and find/download all the drivers, etc... and not to mention updates of bios etc...

  I can say that I have the following discs and back access and access through GUI.

  When I say access via the GUI I found that I was able to do this system revoery options screen when he says click to search the drivers an interface will appear and where I can the eyebrows of all partitions and USB - which was pretty cool. The button says "Load Drivers" and from there, I can choose the partition and try and run one touch back.

  When he first boot from USB it looks like as it is by default and selects a Boot called drive (X and the default folder is the Windows/System32 folder.)

  Here are the disks or partitions I can see and explore

  Lenovo (C 27.5 Free GB GB 28.9 contains just request files and drivers.)

  Local disk (E it looks like there's a Windows installation on it that I can see my sistsers files in the my documents (I got these by using XCOPY to get the complete recursive directory and do be careful if you use just "copy" as it will ignore folders and files inside!)) For me, it's the normal bootable disc and one that is broken.
  349 GB free of 421 GB so this seems to confirm that it is the main trunk and use the partition.

  Local disk (D only 166 199MB MB no said no files and folders at least since the GUI - perhaps back can show me something...)

  Start (X 29.1 MB of free space of 31.5 MB I don't think it's my USB (NOT confirmed) the last modified date is 2009! he seems to have a windows installation - is possible to reinstall from that?) I tried to click on a setup.exe found here but it does not work via the GUI as it comes to find specific drivers is not not a general file Explorer.

  I have 2 drives USB also visible to help me. I got the above files to another on the ERD. And the 3rd is the CD. If these are known as CDROM (F, Reapir disk (G: I did that) and 32 GB Flash (H)

  Maybe I need to burn an iso install wondows in the latter. Who can be a last resort.

  What is perhaps a few right steps to take right now. I think I should be able to change my active partition and get a contact working again by reversing what I was doing back disk partition - don't remember the name... a few trial and error required.

  But I hope that with this info I can get my sisters laptop that works again. I think also that if I took it to a local shop they will simply be to format and reinstall windows 7 and drivers do not care to take the time to maybe get to a situation of factory. It is because the baisc economy. I don't want to go that route because I know I can do what I want to just make the best way.

  Knew nothing about this function - will keep in mind for the next window of time slows down or does not start - throw his toys out of the pram etc... suffering from windows computer slow? You are not alone

  In any case, I think I've sorted it. Hope that C is not too fragmented because I chose to not be complicated with a format and keep the original scores. In this way its just easier.

  Wifi that I had remembered to disable in the BIOS.

  If you want help about this, then please contact on twitter @cambsdigital

• What is the difference between my "reinstallation DVD' and a 'Windows Vista Installation disk'

  In a thread on repair Vista (link below), "a real Windows Vista Installation disc" has been claimed. Laptop Dell Inspiron 1525, my wife took a Dell DVD "Reinstalling Windows Vista Home Premium 32 BIT SP1 - DVD".

  Are they equivalent?

  Virve
  --
  (http://social.answers.microsoft.com/Forums/en-US/vistarepair/thread/61769574-0b39-46cb-ac28-5352e503d5a2/)

  In general, yes your reinstall Dell drive is identical to a disc to install Windows genuine.

  The differences are not applicable for the repair procedure. (FYI - Toshiba and HP Vista, the disks cannot be used to perform a repair install, while gateway disks will work for Vista)

  -John ( http://www.carrona.org/index.html )

• Retail of Windows 7 can be installed and activated on your laptop with OEM 8.1?

  I have a laptop with Windows Pro 64 bit OEM 8.1. I used the HARD drive as a data disc and you plan to install a new HARD drive in it.

  Fortunately the laptop model is compatible with Windows 7 64 bit and all the drivers are available on the manufacturer's Web site.

  So even if I have OEM Windows 8.1 recovery USB, I would like to know if it is possible to do a clean install & activate a retail Windows 7 64 on it without any problems or complexities license?

  8.1 OEM key is embedded in the firmware, so it interferes with the installation of Windows 7 or help to install another OS like Windows 7 detail?

  Thank you.

  Yes, you can. See the instructions:

  How downgrade:

  http://www.PCMag.com/Article2/0, 2817,2417359,00.asp

  Backup before reinstalling Windows 7:

  http://techingiteasy.WordPress.com/2012/10/29/how-to-backup-your-Windows-8-installation/

  Look at the dual-boot

  Follow step 1 to 5 in this tutorial:
  Downgrade from Windows 8 for Windows 7

  Then follow this tutorial: (uEFI-mode Setup).
  Installation of the Dual Boot - Windows 8 and Windows 7 or Vista