question about document process plans and the properties of the form object

Similar Questions

• Questions about close cache events and the defeat strategy "ALL".

  I use near cache, and try to determine what defeat strategy would be better for me. My cards before being highly volatile, I'm considering strongly using the strategy of "EVERYTHING" for at least some of my caches.
  
  This brings me some questions about the event cache stream closely when the strategy using ALL:
  
  (1) should I expect an event to be published from the back cover when an element is added? (i.e. putAll() called cache before)
  (2) should I expect an event to be published from the back cover when an item is deleted? (i.e. remove() called cache before)
  (3) should I expect an event to be published from the back cover when an element is expelled from the rear because of size constraints?
  (4) should I expect an event to appear from the back cover when an element is expelled from the rear due to the expiry?

  Hi Tom,

  near cache before cards do not store the entries inserted in the back cover, so if you have saved a listener on the front plane, you will get the notification to the listener on the plan before all the inserts in the back cover of other nodes.

  It's a little different for entries that have been asked by the local node through the near cache (not directly on the distributed back cache). If the cache almost didn't get call so far, then they will not go into the front plane, so it's the same as if inserted directly into the back cover. It is the starting of the near cache behavior. After the first EEG puts will be cached in the front plane. Once that puts is cached in the front plane, then the listener before card will see put through the cache close to the same node, but not of other nodes.

  Also, the cache near registers a listener lite, so it becomes not the input values changed, as the keys.

  A listener that you entered on the back cover will see each insertion, if you do not save a MapEventFilter or a MapEventTransformer custom with the listener. A MapEventFilter can filter inserts away (I think, the cache similar to that, too).

  Best regards

  Robert

• Question about product ID records and the screen

  Hi, I play a lot of yahoo pool and we must use the record screen programs to ensure that we do not cheat in most leagues here. One proposed condition is that we show our information in our records system. I ask here to learn more about the potential dangers. I noticed that in one sample screenshot, the ID of the product shows. That's my biggest concern. Can you confirm/deny it would be dangerous to put out this info to anyone?

  Hi SeaDogsFan,

  Never share your number to identify product with a person who is not a legitimate representative of Microsoft.

  Software piracy comes in different forms, some more known than others. Each type of piracy is unique and often requires unique protection methods.

  Counterfeiting is a common form of piracy. Others include loading hard drive, Internet piracy and casual copying or softlifting. Casual copying is the sharing of software between people in a way that infringes on the Software EULA. An example of casual copying is if someone were to get a copy of Microsoft Office XP and load it on his PC, share it with another person who took on his PC, then share it with a third person who charged on his PC and so on. This form of piracy is widespread and represents a large part of the economic losses due to piracy. It is this form of piracy, casual copying, that Microsoft is mainly intended to reduce with Product Activation.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Kind regards

  KarthiK TP

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• Something going wrong on a server that contains information about your user account and the mailbox can not be found.

  Cannot open the e-mail.  I can connect on the MSN home page and when I right-click the outlook icon it shows the e-mail Inbox, but cannot access e-mail.  I just get this error

  "Something going wrong on a server that contains information about your user account and the mailbox is not found."

  This error is on the MS and they are aware and working on a fix.  Have you tried connecting mail.live.com directly using your e-mail address and the password?

  For later use, you would get more (and larger) response if you posted this in the Outlook.com (e-mail) section, where are the experts.

• Right-click on photos, documents, icons etc. and the drop-down list takes 5 to 10 minutes to view and sometimes never. How to solve this problem?

  I right click on photos, documents, icons etc. and the menu drop-down selection to delete, rename, etc takes 5 to 10 minutes to display and sometimes never. How to solve this problem?

  Hello

  1. have there been recent changes to the computer before the show?

  I suggest to follow the steps provided and check if it helps.

   

  Method 1: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Method 2:

  If the issue does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Is it possible to create a standard form which can be sent by email to anyone and once filled by the receiver, have a button that clicks on the receiver and the form is encrypted and attached it would open up an email to the sender and a built-in admin pa

  Is it possible to create a standard form which can be sent by email to anyone and once filled by the receiver, have a button that clicks on the receiver and the form is encrypted and attached to an e-mail to the sender and a built-in admin password it open?

  Hello Graphicsguy123,

  You can get the workflow above using the Widget feature. Here is the link for reference:

  https://helpx.Adobe.com/document-cloud/help/create-widgets.html

  -Usman

• I bought cs 5.5 of Austria and the form to get my serial number does not recognize my product number. What should I do?

  I bought cs 5.5 of Austria and the form to get my serial number does not recognize my product number. What should I do?

  Since CS5.5 is no longer sold by Adobe, CS6 and a cloud subscription, just where have you bought?

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  - and https://forums.adobe.com/thread/1572504

• What is the difference between the Creative cloud photography Plan and the Plan of single application of Photoshop? [was: Question about price]

  Why is - this $10 / Monday for photography of the CC Suite, and $20 / Monday for just Photoshop, what's the difference between the two? Photoshop is all I need. But I misunderstood your entitled pricing Options

  These FAQS can help. The plan of photography will be cheaper, even if you are not using Lightroom, but one app plan gives you more storage.

  FAQ: What is the difference between an annual plan and monthly plan?

  FAQ: What plans are available for creative cloud?

  FAQ: How can I find what is included in each Plan creative cloud?

  FAQ: How Creative Cloud storage do with my plan?

• Question about cardinality (lines) to explain the plan

  I have two tables (names have been changed to protect the innocent):

  
  

  TABLE 1:

  
  

  The Null columns?    Type

  -------------------- -------- ----------------------------------------------
  

  Table1_Primary_Key NOT NULL NUMBER

  more than 10 columns
  

  
  

  TABLE2:

  
  

  The Null columns?    Type

  -------------------- -------- ----------------------------------------------
  

  Table2_Primary_Key NOT NULL NUMBER

  more than 8 columns
  

  
  

  Lines of table1 has 1097172

  
  

  Rows of table2 has 160960
  

  
  

  I am analysis request and get explain below:

  
  

  SELECT t1. Table1_Primary_Key

  --

  FROM TABLE1 t1,

  From TABLE2 T2

  --

  WHERE t1. Table1_Primary_Key = t1. Table1_Primary_Key

  AND t2. Table2_Primary_Key = 3432798

  /
  

  
  

  ------------------------------------------------------------------------------------------------

  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |

  ------------------------------------------------------------------------------------------------

  |   0 | SELECT STATEMENT |                 |     1.    21.     5 (0) | 00:00:01 |

  |   1.  NESTED LOOPS |                 |     1.    21.     5 (0) | 00:00:01 |

  |   2.   TABLE ACCESS BY INDEX ROWID | TABLE2.     1.    12.     3 (0) | 00:00:01 |

  |*  3 |    INDEX UNIQUE SCAN | TABLE2_PK |     1.       |     2 (0) | 00:00:01 |

  |   4.   TABLE ACCESS BY INDEX ROWID | TABLE1.  1096K |  9634K |     2 (0) | 00:00:01 |

  |*  5 |    INDEX UNIQUE SCAN | TABLE1_PK |     1.       |     1 (0) | 00:00:01 |

  ------------------------------------------------------------------------------------------------

  
  

  As you can see it table2 is exactly 1 row and join table1 on a correspondence of single line.

  
  

  My question is this:

  
  

  Why the plan of the explain command seems (at least for me) to indicate that it looked like all the rows in TABLE1?

  
  

  Thank you

  
  

  Thomas
  

  the optimizer's decisions are based on the object (and maybe system) statistics: so it's a good idea to provide as much information as possible in these statistics. Basically, there is nothing wrong with statistics automatic collection job - so I would count on that if I don't have very good reason to use anything else. Of course, there are some situations in which it's a good idea to add a few adjustions for automatic collection: sometimes, there is too much created histograms, sometimes there is too little (basically you have histograms when the distribution of the data is not yet). And if there are columns with correlated values who serve together in boundary conditions then create extensive statistics may be a good idea. To make these adjustions, you can use the routines of pref dbms_stats. And sometimes, it may even be a good idea is not to collect statistics for an object and use the sample dynamic (dynamic statistics) for more detailed information on the cardinality of distribution and join.

  In the book of my opinion Jonathan Lewis cost base Oracle Fundamentals still contains the best explanation of the use of optimizer statistics - and Christian Antognini Oracle performance troubleshooting also provides a lot of valuable information about statistics and their gathering. Of course the documentation also explains the basics in detail: Managing optimizer statistics - 11 g Release 2 (11.2). And if you want to get a shorter summary, then you can always take a look at the Web of Tim Hall site: https://oracle-base.com/articles/misc/cost-based-optimizer-and-database-statistics.

• OCP - questions about documents and hands on training

  Hello
  
  I plan for certification OCP (track 10g) and have two or three questions. I tried looking for answers on google, but did not find anything relevant that I want to ask. Here are my questions:
  
  (1) for the OCA, they have added a review more which can be given at home. My question is if there is no sequence that we must first give the SQL examination and only then can we give Oracle database 10g: Administration 1 exam (exam 1Z0-042)? Can we give these two reviews in order any?
  
  (2) my second question is related to the requirement of hands on training. Is - this mandatory? Can it be replaced by any like Linux fundamentals certificate examination examination?
  
  (3) my third question is still linked to the training. If it is mandatory, then what is the economical way to obtain this training? I live in San Jose, CA (USA) and resembles the OCP training class is thousands of dollars. Is there a replacement for this training?
  
  (4) in addition, if it is absolutely necessary to follow a training, I can take "Oracle Database 10 g: Managing Oracle on Linux for DBAS" training for satisfy this requirement?
  
  http://education.Oracle.com/pls/web_prod-PLQ-dad/show_desc.redirect?DC=D46590GC10
  
  Thank you
  VS

  (1) for the OCA, they have added a review more which can be given at home. My question is if there is no sequence that we must first give the SQL examination and only then can we give Oracle database 10g: Administration 1 exam (exam 1Z0-042)? Can we give these two reviews in order any?

  There is no sequence.

  Oracle Database 10g Administrator
  http://education.Oracle.com/pls/web_prod-PLQ-dad/db_pages.GetPage?page_id=151

  (2) my second question is related to the requirement of hands on training. Is - this mandatory?

  Yes. You must also present the "hands on the form requirement for the course".

  Hands-on course requirement form
  http://education.Oracle.com/pls/web_prod-PLQ-dad/db_pages.GetPage?page_id=99

  Can it be replaced by any like Linux fundamentals certificate examination examination?

  For 10g OCP DBA, you must complete one of online or in class with instructor courses below in order to obtain this certification.

  Oracle Database 10 g: security release 2
  Oracle Database 10 g: security
  Oracle Database 10g: Advanced PL/SQL
  Oracle Database 10g: Administration DataGuard
  Oracle Database 10 g: performance tuning
  Oracle Database 10 g: Workshop I
  Oracle Database 10 g: Workshop II
  Oracle Database 10g: Introduction to SQL
  Oracle Database 10 g: new features for administrators
  Oracle Database 10 g: new features for administrators release 2
  Oracle Database 10 g: program PL/SQL
  Oracle Database 10 g: develop PL/SQL program units
  Oracle Database 10g: Real Application Clusters
  Migrating from SQL Server to Oracle Database 10g
  Oracle Database 10 g: implement streams
  Oracle Enterprise Manager 10g Grid Control
  Oracle Enterprise Manager 10g Grid Control Release 2
  Oracle Database 10 g: SQL Tuning Workshop
  Oracle Database 10 g: new features for Oracle8i DBA
  Oracle Database 10 g: backup and recovery
  Oracle Database 10 g: RAC for administrators release 2
  Oracle Database 10 g: RAC deployment workshop
  Oracle Database 11g: RAC Administration

  Database of approved Certification courses
  http://education.Oracle.com/pls/web_prod-PLQ-dad/db_pages.GetPage?page_id=244

  (3) my third question is still linked to the training. If it is mandatory, then what is the economical way to obtain this training? I live in San Jose, CA (USA) and resembles the OCP training class is thousands of dollars. Is there a replacement for this training?

  An alternative is to take an online course, check out the referenced link above for courses that are available in online format.

  (4) in addition, if it is absolutely necessary to follow a training, I can take "Oracle Database 10 g: Managing Oracle on Linux for DBAS" training for satisfy this requirement?

  
  http://education.Oracle.com/pls/web_prod-PLQ-dad/show_desc.redirect?DC=D46590GC10

  Please see the list of approved courses shown above.

• Questions about serial port read and write at the same time

  Hi I create a user interface for the communication serial port, where there are essentially 2 front panels, where the user enters commands one and the other where the prints of UART is delivered. I thought initially using a state machine but the reading and writing may be independent sometimes and so I can't rely on States. I searched a bit on the forum and he left me even more confused. Help, please.

  (1) in a thread that sessions visa duplicated has been used for writing and reading at the same time, is it recommendable? How will this affect performance?

  (2) essentially when the vi is reading data are it must constantly view as well, however, someone said that it takes too much memory to use shift registers, so how do I go about this? If using a State in queue after the loop of reading it affects the playback loop and be sequential?

  In addition anyway is to move the cursor to the latest data from the indicator

  (3) for the control of the user input, assumes that the user has entered an order in the control and press ENTER, then writing visa is launched, but if it comes in another string and press enter then write must be called again... is - it possible? will detect the previous commands in the control of compensation?

  (4) according to my understand the expectation for the event do not monopolize resources and writing can go in parallel, am I right?

  Thank you. I have attached a very basic vi which took me to the point, but I want to make it more robust. Please help especially in the part of the user interface.

  su_a,

  (1) you can have only one session to a port. Several UART can handle full duplex so performance is not affected.  At flow rates of high data and large amounts of data, buffering and latencies of BONE can become a problem.

  (2) who told you that shift registers using too much memory? Shift registers are usually the best way to transfer data from one iteration to another. String concatenation inside a loop (registry to offset or not) causes the chain to develop and may require re-allocation of memory.  Your VI never clears the string so its cold length become very large.

  Generally, you do not have an active cursor on an indicator.  If you want to always display the most recently received characters and turn on the vertical scroll bar use a property node to keep scrolls to the bottom.  This can be annoying for users if they attempt to manually move the scroll bar and find that the program continues to move it back automatically.

  (3) if the user has changed the value in the chain of command, when he hits enter the modified value event fires.  Simply strike brace does not change the value and does not trigger the event.  Not control need to be erased, but the value that he has to change.  If you want to send the same command again, have a button send a command may be a better choice.

  (4) write is a case of the event.  It is not in parallel with anything.  The structure of the event do not monopolize resources.  The other loop will run while it waits.

  The event loop will not stop when you press the STOP button. Probably it wll take two command: change events of value after JUDGMENT before any loop stops.  Replace the Timeout event (which never expires) with a STOP: value change event and a real wire of this judgment to the Terminal endpoint.  Remove the local variable.  Make mechanical locking when released.

  Lynn

• Question about size of menu and shift video. no miracle solution? Need to send DVDs to the tm Editor

  Hello, so I edited a video to the top and made a dvd for the first time menu. I have connected all the buttons and makes nice nice however... I realized after doing the menus that the dvd is 720 x 480.

  I put the menus in there and since it worked, I thought that it would be "re - format video when the dimensions change.  Is it possible to do this job without create menus entirely?

  I ship this dvd to a customer in the morning, and I will re-start not rather the menu from scratch.  Here are the screenshots of the video when played

  Video has been exported to 720 x 480. and the menu that I believe has been 1920 x 1080

  

  You say that the video is 720 x 480, but not if it is 4:3 or 16:9. It seems to be 16:9 image.

  Be sure to set the 16:9 menu. Because you used a 1920 x 1080, he should have recovered 16:9 by default, and for a DVD, even transcode to 720 x 480.

  So I don't know why it doesn't work. It may be a different size than you think. Use "Edit in photoshop" and let us know.

• Questions about reinstalling Windows XP after the end of Support

  Several members of the family of my friends that I sometimes provide technical assistance for are still under XP SP3 on their systems.  These systems are too outdated and underpowered to upgrade to a newer version of Windows, and it will probably be some time until they are able to upgrade to a more recent hardware capable of running most modern versions of Windows.

  If in the meantime, something happens to one of their computers requiring a reinstall of Windows after support for XP purposes, but before they can get a newer computer, I have a few questions about what will happen:

  1. Is there still a way to activate their existing copies of XP during installation process?
  2. While I understand that new patches, updates, patches & will be is no longer provided, existing patches will be available through the Microsoft Update service so that I would be able to get those computers to update state that they would be about to XP supported ends, or do I have to search elsewhere to try & find these updates?  (It would be nice if Microsoft put up a cumulative update that would be sort of a mega-patch for people in this situation to be able to get back to the most current state systems, but I would not be surprised if there wasn't such a thing).

  Anyone know the answers to these questions?

  Thank you

  You should be able to clean install and activate Windows XP.  You should be able to upgrade as well, even if the wise move would be to get the updates stored on portable media or integrated into a multimedia installation (or both) as soon as POSSIBLE if the plan is to continue using Windows XP for a while.

  My suggestion is to set up and to buy Windows 7 Professional renovated systems / lease from places like TigerDirect.com - as pricing is generally about the same as just a license for Windows 7 or a little professional, the hardware specifications of these machines are likely machines Windows XP current in use, using something like the PC Mover take care of Laplink and Microsoft to move files (or for the more than 25 USD the) applications that can be moved as well) to the new system of the former is possible, and Windows 7 will get updated until 2020.

  Recently research I've seen systems to Windows 7 Professional for as little as 150 USD with 4 GB of memory and dual core processors.  Not bad.

• Qosmio G20: Question about networking & monitor in and Xbox

  Just bought a G20 last week and I'm in love. First laptop I've ever owned and its worth every penny.

  A few scarecrows.

  I never received an antenna adapter to connect my in arial, but I'm sure I sohuld of fact. In the quick start manual of what it listed everything that I should received in the pack, and who was listed. Was not enough one - if anyone knows a number to contact Toshiba and get one of these sent to me? Can't seem to find one anywhere.

  Second... I'm going to my brother's computer network. Novice course of network, it does not work that well. I'm not sure whether if we need a router? I just want to connect to his computer and use the internet through that. As you would with a network cable. So he bought himself a wireless network card... but we'll be buggered if we can get it too work. Any advice or a definitive guide... or do we this router after all?

  And thirdly, sorry for the long post, but I'm playing my Xbox by the G20, but I'm having no luck what so ever. I plugged the monitor using the three composite cards (white, yellow and red) but nothing that passes through. The only way I've seen a photo is when you set up a decoder and it happens in a small box when its analyses for channels... but I can't select to see and it seems s delay 1 second.

  Sorry for the post long-term... just try to make it all sorted.

  Thanks in advance for any help.

  Hello

  You are right that the Qosmio is a very nice unit.
  But I'm not sure about the antenna adapter. I found the information in the user manual that the antenna adapter is optional. In this case the adapter will not always come with the laptop, but you can ask that the Toshiba service partner.

  Well well, on the network connection: If you want to connect two computer, you need a crossover network cable if you don t use the router. In addition, two laptop computers must be in the same workgroup. In addition, you must manually set the IP address, the default gateway and the subnet mask in the internet protocol TCP/IP properties.

  On the Xbox:
  If you want to know more on the connection of MCE and Xbox, see this Microsoft Web site.
  http://www.Microsoft.com/windowsxp/mediacenter/Extender/mcefaq.mspx

  Check also questions other messages of the forum on the Xbox:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9575&MessageID=33794#33794

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9756&MessageID=34462#34462

  Good luck