Question about "easy connect naming".

Similar Questions

• question about laptop connectivity

  Question about my laptop computer connection

  Hello

• Question about the connection of a customer VPN ASA

  Hi guys,.

  I have a question about Tunneling VPN. I have an ASA 5505 with static PPPoE address external and local 192.168.202.0/24 network, operates as an EasyVPN server. On the other side is an another ASA 5505 without dynamic PPPoE outside interface acting as EasyVPN customer in customer ode. The internal network is 192.168.1.0/24

  It works very well! But now, I created another user who uses EasyVPN client software to connect to the EasyVPN server. This works as well.

  But how am I able to connect customer network 192.168.1.0/24 on the connections of the ASA?

  Please give me a hint.

  "But how am I able to connect customer network 192.168.1.0/24 on the connections of the ASA?

  Yes, if you set the ACL of split tunnel correctly you should be able to connect to the remote client ASA.

  Please follow the method of configuration of Cisco doc split tunnel, at the bottom of the link.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00808a61f4.shtml

  Evaluate the useful ticket.

  Thank you

  Rizwan James

• General question about the connections of 3DES side2side ASA

  Hello I have a question for a project:

  We have an office outside our main building is connected via a connection to radio waves of 34 MB and a 10 MB darkfiber.today the radiowaveconnection is not secured and the client wants a 3des encryption and that he will use 2 ASA5510.there are also the 2 questions:

  I have a connections between eigrp process running and I know that the asa cannot deliver this protocol.so can I use the asa in transparent mode only for encryption or as side2side connection?

  She I the first time I work with the ASA so any help is appreciated.

  concerning

  Klaus

  This document describes how to use the Cisco Adaptive Security Device Manager (ASDM) to configure the Cisco 5500 Series Adaptive Security Appliance (ASA) to act as a remote VPN server. The ASDM provides the safety management of world class and through a Web management interface that is intuitive and easy to use. Once the Cisco ASA configuration is complete, it can be verified by using the Cisco VPN Client.

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008060f25c.shtml

• QUESTION about to connect the calling WinsCard.dll drive

  could not get the list of player and connect the player successfully by call winscard.dll under C:\Windows\system32 folder in my local PC, but the other PC could do that.

  My PC environment: 2002 XP, SP3
  the version of winscard.ll is August 4, 2008

  Hi Yang Yu,

  1. Is the issue with the computer recognizes the card reader or the card reader can't read the card?
  2. What is you receive the exact error message?
  3. What is the number and the model of the card reader?

  Refer to the article below and try the steps mentioned, if you use Windows XP Professional x 64 edition.

  A universal serial bus smart card reader that is connected to a Windows Server 2003-based computer may not detect the smart card

  http://support.Microsoft.com/kb/919922

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

  How to ask a question

  http://support.Microsoft.com/kb/555375

• Question about the connection using the "sqlplus / as sysdba.

  Good afternoon
  
  The command:
  

  sqlplus / as sysdba

  worked very well for the Oracle server. When I go to a client, it does not work even if I specify the correct instance. On the client, I can able to connect using one of these two commands:
  

  sqlplus.exe sys/abc123@"orahost.john.local:1521/dbca.john.local" as sysdba
  
  or 
  
  sqlplus.exe sys/abc123@dbca as sysdba
  
  but not
  
  sqlplus / as sysdba
  
  or 
  
  sqlplus /@dbca as sysdba

  The question is: is the form "/ as sysdba" limited to used on the Oracle server and not available for customers?
  
  Thank you for your help,
  
  John.

  is the form "/ as sysdba" limited to use on the Oracle Server

  Yes

  and not available for customers?

  Yes

• Question about SQL * connect more in the syntax

  Good evening
  
  I can connect successfully from the client to the host using the following command:
  

  0 19:40 [Oracle] [23G] [569M] E:\Client>sqlplus scott/abc123@dbca
  
  SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 22 20:01:56 2010

  But I wanted to omit the password, so I tried:
  

  0 20:03 [Oracle] [23G] [590M] E:\Client>sqlplus scott/@dbca

  thinking that SQL * more tempt me the password but, if it does at all. I tried in vain a few variations. I read the specifications of command line for SQL * more and it seems that this command should work.
  
  Questions: What is the problem with the command I typed and what is the correct syntax?
  
  Thank you for your help,
  
  John.

  To omit the password using connect scott@dbca , but do not connect scott/@dbca of sqlplus.
  or sqlplus scott@dbca

• Question about the connection of the laptop to stereo to get a good sound

  I'm trying to get an output good phono from my laptop to a stereo. The s-video output a sound, when it is so I could divide the s-video cable in two phono which can then be connected to my sound system.

  Hello

  Yes, it is possible to use a RCA cable that supports a Cinch-plug at the end and 2 Cinch plugs on the other end for the channels left and right sound.

  In addition, the headphone should support s/pdif output. On this way, you can connect the phone to the stereo with a better sound quality.

• Satellite L20: Question about TV connection

  Hello

  I have the Satellite L20 with Intel GMA 915 graphics card.
  I obviously have cable connection from laptop to tv.
  I wanted to ask that a program I get image from laptop to TV.

  --
  Thank you very much
  Assistant

  If you connect the laptop to the TV via the s-video cable you must turn on the s-video on your TV.
  If you are going to build the connection with cable SCART, so I guess you have to choose the channel SCART.

  In addition, he must use the FN + F5 key combination to switch the display to the TV

• Just a question about the connection SSL to the PIX

  Hi all!

  I'm used to config pix by the window / telnet, but now I only HTTPS access to it.

  How to connect on it? (what should I use for the login and password)? I know only enable password, but do not know for sure pix hostname or other things... There is not a "username" or additional to the default "aaa".

  Enable password is enough

  type in your browser

  https://PIX_IP_address

  When you are prompted for the name of user and password leave the field empty user name and as password enter the enable password... You will probably be asked again (by java applet) then enter this password again

  M.

  Hope that helps the rate if it isn't

• Questions about the connection to the Windows domain

  Salvation Group:

  Is there anyway to force the connection to the windows domain? I have

  don't want users to connect to their local account.

  There are number of login script I want to run

  on the computers of the users. Thanks for the help!

  Click on the text in performance and Maintenance, administrative tools and then double-click local security policy to start the local Security Policy Management Console.

  Under security settings, expand local policies item by clicking on + (plus sign) and select Security Options. Double-click Interactive logon: do not need CTRL + ATL + DEL, click the enabled option button and click OK.

  Regarding the script process is concerned, I recommend that you check out (good!) M Script Center $ (http://www.microsoft.com/technet/scriptcenter/default.mspx). Please be careful with the scripts, especially if you work in a corporate environment...

  Good luck

  Josef.

  PS - please rate the usefulness of the post.

• Question about wireless connection

  I recently bought a laptop and I would like to try the version for this laptop's wireless, but the book information tells me to press the switch on the right to turn on the system. Looks like it is blocked?
  Any suggestions to fix this?

  In my opinion if there is no wireless switch there is no ability to integrate into the wireless card because there is no antenna. As said Miro PCMCIA wireless card is the best solution.

• try to use easy connect to befriend isqlplus but does not

  Using the Easy Connect naming method
  
  of http://download.oracle.com/docs/cd/B19306_01/network.102/b14212/naming.htm#sthref783
  
  I want to connect to isqlplus remotely.
  
  Forgive me if I ask this stupid question,
  
  do I need to install the oracle client to use isqlplus. If Yes, then no need to answer the question above.
  
  I mean with browser without a doubt, I can reach the url, but when it prompts for the connection string, I try the replace by the
  
  
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = globalro-417667)(PORT = 1522))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = tomkyte)
  )
  
  so I wonder if I'm doing the right thing or not.
  
  Thank you!

  Hello

  See the link support entirely, the page which you referred it self says 'this chapter describes how to configure the connectivity information for client connections to the database server'. If the Client is required.

  Clients can connect to a database using easy connect server name if the following conditions are met:
  -Oracle Database 10 g Net Services software installed on the client.
  -Support for the oracle TCP/IP on the client and the database server protocol
  -No functionality requiring a more advanced connect descriptor is required

  Everything is there in the Document ORACLE.

  -Pavan Kumar N

• A question about external authentication with PHP OCI8 using a portfolio store

  Hello
  

  SQL> SELECT * FROM v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE     11.2.0.1.0     Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> 

  OS: Linux Fedora Core 17 (x86_64)
  PHP Version: 5.4.14
  Apache version (httpd): Apache/2.2.23 (Fedora) 

  I have a question about OCI8 connection to the Oracle server via portfolio, which I understand is a good practice because we do not have to hard code the users password. I'm trying to read pages 117 and 118 of the book The Underground PHP and Oracle manual online to learn how to set up a portfolio. I proceeded by steps as explained in these two pages (except that at the end I connect, as a normal user, not a privileged user) yet, apparently PHP does not detect the user.
  
  Here's what I write in my script
  

  $connection = 
                  oci_connect 
                      (
                          "training", 
                          "", 
                          "php_ora_usr", 
                          "AL32UTF8"
                      );

  the training is the name of the user that I use in my PHP scripts to connect to the oracle database and the password is mypassword (is not true, just for the purpose of this thread :)) the code above gives me the following error:)

  Warning: oci_connect(): ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 91
  
  Fatal error: Connection step: ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 13

  But if I also provide the password which is,

  $connection = 
                  oci_connect 
                      (
                          "training", 
                          "mypassword", 
                          "php_ora_usr", 
                          "AL32UTF8"
                      );

  Obviously it works, but at the same time, this means that my wallet is not operational.
  
  So I'll write here, step by step, how I did according to the instructions contained in the pages 117 and 118 of the above mentioned book and I would be grateful if you could kindly tell where I made the mistake (s)
  
  The following text was performed under my oracle linux (so the dbagroup)
  
  Step 01:_
  I created and provided the password for the directory of portfolio

  mkstore -wrl /home/oracle/wallet_dir -create

  Step 02:_
  I created an entry for my oracle user that will be used in my PHP scripts to connect to oracle
  user: training
  password: mypassword

  mkstore -wrl "/home/oracle/wallet_dir" -createCredential php_ora_usr training mypassword

  I also checked that the entry was actually created for my user in the portfolio

  $ mkstore -wrl "/home/oracle/wallet_dir" -listCredential
  Oracle Secret Store Tool : Version 11.2.0.1.0 - Production
  Copyright (c) 2004, 2009, Oracle and/or its affiliates. All rights reserved.
  
  Enter wallet password:                
     
  List credential (index: connect_string username)
  1: php_ora_usr training
  $ 

  Step 03:_
  I added the following to my $TNS_ADMIN/tnsnames.ora

  .  .  .
  php_ora_usr = 
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = db02)
      )
    )
  .  .  .

  Step 04_
  I added the following to my $TNS_ADMIN/sqlnet.ora

  # sqlnet.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
  # Generated by Oracle configuration tools.
  
  NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
  
  ADR_BASE = /u01/app/oracle
  
  WALLET_LOCATION =
      (SOURCE =
          (METHOD = FILE)
          (METHOD_DATA =
              (DIRECTORY = /home/oracle/wallet_dir)
          )
      )
  SQLNET.WALLET_OVERRIDE = TRUE
  SSL_CLIENT_AUTHENTICATION = FALSE
  SSL_VERSION = 0

  _ Step 05
  The TNS_ADMIN environment variable is already set correctly in * / etc/sysconfig/httpd * so I didn't need to do something for this step
  
  
  Step 06_
  I gave to access Apache (as root) in the directory of portfolio (in fact, it seems that the user oracle (dba) of linux also has the required privileges to grant this access to the apache)

  # setfacl -m u:apache:rx /home/oracle/wallet_dir
  # setfacl -m u:apache:r /home/oracle/wallet_dir/{cwallet.sso,ewallet.p12}

  Step 07_
  Restart Apache

  # service httpd restart

  Step 08_
  Finally make a test connection using the connection string php_ora_usr which the entry was created earlier. And the test was not successful, as indicated above

  $connection = 
                  oci_connect 
                      (
                          "training", 
                          "", 
                          "php_ora_usr", 
                          "AL32UTF8"
                      );

  The error message:
  

  Warning: oci_connect(): ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 91
  
  Fatal error: Connection step: ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 13

  I would appreciate it if you could kindly shed some light.
  
  Thanks in advance,
  Dariyoosh

  That gives a good clue to begin with. With your platform/Apache/DB, you might need different ACLs. Test directory and permissions. Check what euid your Apache runs as. Good luck.

• questions about 2100 wlc and lwap connection

  Hello

  I have a few questions, I hope you can answer me.

  In fact, I have a controller connected to 3 Lwap 2100, and they are connected to the WCS. they have a static IP address.

  The distance between each point of access to more than 30 meters.

  1. the distance between the access points affect the accuracy or the stream. How can I calculate this

  2. because the APs use a static IP address, each customer should I connect to the network to add a static ip address? can I do the APs detect clients dynamically?

  I have lwapp reset guide, guide WCS configuration and configuration guide for WLC. If you have more documents or more pls share with me.

  BR

  Yamani

  Hello Ahmed,.

  Yes the distance between AP affect the wireless signal.

  to determine the best location of AP and the distance between them, as the site survey is necessary with the expert of the spectrum wireless or airmagnat...

  You can check the following links for design and RF management

  1) http://tools.cisco.com/squish/1Ea09

  2) http://tools.cisco.com/squish/51a58

  for other questions about DHCP, it is not a must that customer use static IP, you can always configure them with DHCP.

  as an extenal DHCP (like windows server), or on the WLC himself (to the title of controller-> > internal DHCP tab).

  Kind regards

  Talal

  =========
  Please note the answers that you find useful and mark as answer - when is it :-) - so that others can easily find