try to use easy connect to befriend isqlplus but does not

Similar Questions

• iPhone connects to the wifi but does not connect to internet

  I have an iPhone running iOS 9.3.2 6s (last updated).

  The phone connects to the wifi network, but even if it's to show the signal strength is good, the phone does not charge any internet content (weather, FaceBook, email, etc.).  If I disconnect WiFi and use the data, it works very well.  We have no problem connecting to the computer or a smart TV network wifi and internet connection.

  This also happens with my daughter 5s iPhone and iPad for my son.

  Sometimes it will work fine on wifi, then a little while later I can't get anything to load. And it can be like right now when I'm at home alone is not as if there's a big load on our wifi.

  We have high-speed internet by cable (25 MB/s download speed) and a router Lynksys EA3500.  Encryption is set to WPA (not WEP).

  I tried to go into my phone settings and reset the network.  Always problems.

  It's really frustrating because you eventually switch to our mobile data and use it instead of our data ' wifi '.  And then to go on our data on our phone plan

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• New Samsung UHTV connects to the router, but does not access Internet

  My new UHTV Samsung detects the private network (router) OK, but the TV does not connect to the Internet.

  All other devices (PC, radio) I can access the Internet through the router without problems.

  Before I read too many books, can someone point me in the right direction?

  ElaineM,

  I tried everything in the book - without success; so finally, I reset and reconfigured the router.

  He now works as usual, and I hope it will stay like that.

  Thanks for you patience and support.

  Björn

• Lightroom CC when I try to edit in Photoshop CC open Photoshop but does not bring to the top of the photo to ediy!

  By clicking on the Photo edit in Photoshop 2015 I could edit a copy TIF of the photo I had gone as far as I could with Lightroom. It worked well two days ago now open Photoshop, but the image I want to edit opens ever. If I select Edit in Photoshop Elements, it opens a PE in with a PSD file. He has also been slow and cranky lately. I lost some files in the process, but has not been able to recover after putting a lot of wok in them in Photoshop. You had to use RescuePro, SanDisk to get their card, but all recovered.

  Installing a hybrid drive of 4TB will help with speed and bad mood problems?

  I use a Dell Inspiron PC with windows 7 Home Premium Edition, 8 GB of memory and two hard drives of 2 TB. The processor is an Intel i5 Quad core.

  Any help would be appreciated.

  Jack

  Having exactly the same problem with "Edit in photoshop" worked fine two days ago.

• Using of new 64-bit drivers, but DOES not connect Win 7 & TungstenE2. Help!

  After trying to hotsync over bluetooth on the new laptop with Windows 7 w / TungstenE2 and failure (serial port used by another application);  I downloaded the new 64-bit drivers provided in this message section. Problem now: no link could be established between the desktop and the device. Even if bluetooth is 'off' the device is now trying to use the bluetooth to non-working process. Tried the USB process, using the newly installed drivers. No connection.  It is now beyond my skills, and I'm in the circle of bluetooth, or the circle of 64-bit USB driver. I must be missing something!

  Have you set the Hotsync Manager to use USB on your device and the computer?

  What version of Palm Desktop are you using?  6.2 or 4.x?

  On the E2, open the Hotsync application and display the value.  It must be defined on 'Cable', not Bluetooth.

  WyreNut

• WRT120N Wireless laptop connected to the router, but does not connect to internet

  I have a HughesNet HN9000 modem connected to a Linksys WRT120N router. I have two desktop computers, both running XP Home, connected to the router via ethernet .5e cables and work perfectly. I have a laptop running Vista Home Premium, I am trying to connect to the internet via the internal wireless card. According to me, the laptop connects with the wireless router, as it connects but says 'Local only' - it won't let me access the router IP/control panel. I tried to reset the router / modem as well as the parameters of the laptop, but I keep getting the same question.

  If I connect the laptop and the port #3 on the router via a cable .5e I can browse the Internet. But I need to be able to use the laptop throughout the House so electrician is not an option.

  I found this article which directed me to this download , which worked. If your help is most needed. Thanks anyway.

• Connect to my pc, but does not give me my profile

  It turns on and goes to my lock screen. Then I go to connect to my account and that he accepts and everything. Takes forever to access the home screen and then when he gets there, missing my customizations. He fell to the bone exposed, IE, Explorer of files, store, office and Xbox SmartGlass. I just bought this new PC Thursday. I should have questions like that.

  I tried logout and return signature. It does the same thing.

  No I don't have complained to them yet. I bought it in one of these packs nice bundle at Best Buy. I bought it only for 5 days.

  Earlier is better when it comes to working the issues.
   
  You can also try a system restore to a time before your profile appeared badly.  First option on this page:
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

• I have uverse highspeed wireless modem. My office is connected to it and it works fine. My laptop connects to the modem, but does not connect to the internet.

  I tried to re-initializing modem and reload Explorer.  Any search engine will find internet.

  Hi Steveyy,

  1. you receive messages or error codes?

  2 have you tried to update the wireless card?

  You can read the following article and see if it helps:

  Setting up a wireless network

  Solve problems, find wireless networks

  You can also temporarily disable the security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

• try to change this dynamic jquerty imgen code but does not work

  the code is

  var element = sym.$("image_1");

  Element.Attr ("src", "image_2.png");

  No coments

  Indeed, when you use attr, you will need to change the image of div to img.

  Another way would be to use the css background image - in which case you can keep the div.

  SYM.$('elementName'). CSS({'background-image':'url("images/ImageName.jpg")'});)

• My mobile Samsung S3 connects mobile playmemories perfectly, but does not connect my Galaxy 10.1 rating

  When connecting on my tablet, it accepts the password, and then sends an error message "Unfortunately mobile playmemories has stopped." What could be the problem?

  Good day KFowle!

  The camera sharing login information to [send to Smartphone] and [Ctrl with Smartphone] with a device that has permission to connect. If you want to change the device that is authorized to connect to the camera, reset the connection information as follows.

  MENU (settings) (network settings) [SSID/PW Reset] [OK] 

  You then need to connect the Galaxy Tab with your camera 10.1 by following one of these steps.

  Send pictures of Cyber-shot to an Android device

  Smart remote for Cyber-shot and an Android device

  Note: It can also help to re - install Playmemories Mobile on your Galaxy Tab 10.1

  If my post answered your question, please mark it as "accept as a Solution.

• Unable to connect using easy connect or email invitation

  I'm having a problem connecting with Easy Connect. I had no problem when I lived in Orlando and helped my mother with her computer. She would tap the Easyconnect connection to me, and I would click on him and had NO PROBLEM. Now, I moved to Texas and tried several times to connect and cannot. I don't get the unable to connect due to errors in hand to hand, but it sits there and plays as is hunting for her, but does not connect. I even tried with enamel and got the same results. I was wondering if my router has been a problem, but used my another laptop as host and connected within one minute to each other. Is there a problem here or is true to his bad rep Microsoft?

  I can't think of anything. I know that his machine has not changed configurations as I'm the one who does this.

  See if it helps;

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/neither-easy-connect-nor-remote-assistance-work/5ee1feac-05c7-4101-8347-102e94b9a06f

• Laptop does not connect to the internet, office. Both use the same router. Tried troubleshooting, does not. Help!

  I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you

  Hello

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password.

  Default password Machine virtual XP Mode

  I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password. Please giveme the default password

  If you're talking about XP Mode the default password is XPMUser.  In general you can not use Windows without a password in Windows Virtual PC that you can with Virtual PC 2007 and before.  XPMUser is used only with the XP Mode virtual machine.  All other virtual machines requires a user created password.  If you have changed the password in XP Mode and forgotten, then you have to start over.

  Windows Virtual PC is based on virtual server rather than VPC and all virtual machines need a password.  If necessary, uninstall the integration features, start the virtual machine and create a password for the admin user.  Restart the virtual machine, and then reinstall the integration features.  You will not be able to access a virtual machine created by the user that has no password, while the integration features are installed.  Once you have everything right, that a virtual machine will not be asked a password if you are the admin user in Windows 7.

  @george1009,.

  Everything got?  :)

• I had to use restore on itunes on my ipod and now it shows on my list of computer peripherals, but does not connect with itunes.

  I had to use restore on itunes on my ipod and now it shows on my list of computer peripherals, but does not connect with itunes.

  Original title: ipod

  You may be better to ask on the Apple Support Forum - https://discussions.apple.com/thread/1577894?start=0&tstart=0 (example)

  See also - http://support.apple.com/kb/TS1363

  It will be useful.

• I try to use After Effects on my laptop, but all his telling me, is that "you can't use this version of the application"Adobe CS6 effects"with this version of Mac OS x.

  I try to use After Effects on my laptop, but all his telling me, is that "you can't use this version of the application"Adobe CS6 effects"with this version of Mac OS x.

  Install the latest update of CS6:

  http://Adobe.LY/DVA_updates