Question about errors stored in our trace files

Similar Questions

• General questions about errors in eventvwr

  Greetings.

  I have a general question about some failed modules are stored in the Windows Event Viewer.

  An error leading to the crashes some applications that I've seen several times now when supporting computer problems is something like this:
  (Windows error reporting) Fault bucket, Type 0, name of the event: PCA2, (...) P1: application.exe, (...)

  I wonder what this 'PCA2. Which is a kind of module Windows handles tasks such as allocating memory or smth. Like this? What could be the cause of these errors (physical memory problems / corrupt swap file / insufficient rights?)

  Same Question for the application falls down because of "kernelbase.dll" as in:
  (Application error) Failing application: application.exe, Version: 0.0.0.0, (...) Failed module: KERNELBASE.dll, Version: 6.1.7601.18015, (...) Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll (...)

  What is the .dll file and what could possibly cause kernelbase.dll Fault?

  The application can be a bit buggy, but I wonder what could possibly cause these accidents and if there is a way to fix these problems - or what dev did wrong.

  The two errors occur mainly on x 64 systems - especially Windows 7/vista

  Kind regards

  With application errors, the application is called everything first and the module he collaborated with is named second. Normally you should try to reinstall the application if you see not to repeat the mistakes. If this does not work, you go to the forum on the application to see if other users see the same error. There may be a bug in the application.

  The observer of the Application event log contains Information reports (event ID: 1001) for errors where the details were sent to Microsoft for review. You will find that there are corresponding to the event ID: 1000 reports errors, either in the system or Application logs. These reports are also included in the center of the Action. Center type action in the area of research above the Start button and press ENTER. Click on the arrow pointing downwards to the right of Maintenance, and then click view reliability history. The errors reported are the Red orbs with a white cross. You can search for solutions to problems, but occasionally you get a significant response from Microsoft.

  I can't tell you what it means PCA2. Google did not find a significant result. The reports themselves are not unintelligible, although I have never tried to understand the meaning of a particular report. I have extracted what, in my view, is a starting point of two reports:
  Event name: PCA2 = P1: motherboard_utility_onoffchargesetup.exe P2: 4.65.0.0

  Event name: PCA2 = P1: setup.exe P2: 11.0.0.28844

  You have the app in the boredom and the version of the file. These details have been extracted a file of information system to a computer with a card mother Gigabyte. So, you see I have a starting point, if I wanted to determine the cause of a failure.

  I will say before you go dive deep into each event ID: 1001 report that many are not easy to even begin to understand. However, they can provide useful clues.

  KERNELBASE.dll is likely to be the module with which the application works. You need to focus on the application.  KERNELBASE is probably preceded by P3 or P4 in the report?

  General remarks on the event viewer:
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Question about error 1242 (file/folder expected)

  I have the following code:

  var myAmount = prompt ("how?");

  var = myDir "/photoshop_js_test/ f / [authority];

  myname = "testJPEG"; var

  var mySuffix = ".jpg";

  var myFile;

  for (var i = myAmount; I > 0; i--) {}

  myFile = myDir + MyName + i + mySuffix;

  var myJPEG = new JPEGSaveOptions();

  myJPEG.quality = 5;

  myJPEG.formatOptions = FormatOptions.STANDARDBASELINE;

  activeDocument.saveAs (myJPEG, myFile, false);

  activeDocument.close ();

  var j = i-1;

  var myNewFile = mySuffix; + j + MyName, myDir

  open (myNewFile);

  }

  But the interpreter gets stuck on this line:

  activeDocument.saveAs (myJPEG, myFile, false);

  and gives me error 1242 - improper argument... File/folder provided.

  I'm puzzled.  I don't know many Javascript and learn another (ActionScript) ECMA script, but I tried to create a code for someone who has posted in the forum of Photoshop.  I suggested Javascript it and am now trying to emulate the problem on what he posted.

  (the [authority] is a path on my computer that I put comment with supports to protect my file system.)

  Any help is greatly appreciated.

  Sincerely,

  -markerline

  You can try this...

  myDir var = '/photoshop_js_test/ Inv. [authority];

  Note the slash before the drive.

  You can also do a check if the file exists;

  {if (!) MyFile.Exists)}

  Alert ("file does not exist");

  return;

  }

• Question about a config/95 G log file: LabView_32_11.0_Lab.Admin_cur.txt

  Hello world

  One of our lab computers running Labview has been reported to be running out of storage and asked me to figure out why. I scratched through some windows folders to find the culprit, specifically folder: c:\users\Lab.Admin\AppData\Local\Temp where I found a 95 G file titled LabView_32_11.0_Lab.Admin_cur.txt, I noticed that the Lab.Admin is the user name and is also included in the name of the file, so I guess it's sort of config/log file for the current user.

  The file was too large for me to open and watch with no matter what program I had available so I just renamed, restarted Labview to check that it might be recreated then removed the bloated file. The newly created file has the following inside the itt:

  ####
  #Date: Wednesday, June 13, 2012 14:49
  #OSName: Windows 7 Professional
  #OSVers: 6.1
  #OSBuild: 7600
  #AppName: LabVIEW
  #Version: 11.0 32-bit
  #AppKind: FDS
  #AppModDate: 22/06/2011 18:12 GMT
  Base address of #LabVIEW: 0x00400000

  Can someone tell me the purpose of this file and what might have caused to grow to 95 G. I'm only interested in learning how to prevent it happening again.

  See you soon,.

  Alex

  Do you mean 95 gigabytes?  95 GB?

  I think that it's a crash dump file in the event where LabVIEW detects an error.  Could you have had a recent accident (perhaps several) where some large scale applications have been involved?

  You can use LabVIEW to open the file.  Write a small VI to open the text file, then just read a smaller number of bytes and display it in an indicator of the chain.

  I have several of these files in my temp directory from to the slightly different versions of LabVIEW installed.  But they are tiny, about 1 KB.

• Question about the size of a DVD file made?

  Hi all

  I just finished my first home using Premiere Pro CS4 and Encore CS4 video. My source is a consumer HD camcorder. When I created the PP project, I chose the AVCHD format to keep the best possible quality. Yes Iimported files in PP, apply some transition effects and the title a bit. Then I sent the sequence again via dynamic links. When you create the project in again, I chose the Blu ray. I therefore created a menu and all the navigation, added a subtitle and background music. Initially, I wanted to created a DVD of my video to give the members of the family, so I'll drive created, select output DVD and make the video. Now, here's my problem: the created DVD folder is 7 GB, and my pictures are only 1h45min. I always thought that a single layer 4.7 GB could hold about 2 hours of video? My source in HD, but by selecting the DVD release, shouldn't she converted to SD and fit a 4.7 GB disc? What I am doing wrong?

  Thanks for your help.

  Bruno

  You can change the transcoding settings, by default the transcoding settings are automatic which is for the best possible quality. Right-click on the media in the project Panel, and then select settings for transcoding. Change settings for transcoding DVD NTSC DV high quality 4 MB VBR 2 pass for transcoding. You will be able to check the change in disk space on disk under building Board info after transcoding. If there are still more than you must try with 4 MB or of poor quality.

• A few questions about the use of a XML file to add text in a component defined in HTML TextArea

  I use AS2 in Flash CS3.

  I have a TextArea component in the scene that load its XML text and I was able to use the ul and li tags to create lists. However, when I try to include a nested list, he inserts just a line break between the nested list and the main list rather than he dash away. Is there a solution for this problem?

  Otherwise, how would I be able to add spaces nonbreaking in the XML so that they will be inside the TextArea element? I tried and & #160; without success. I've been searching the net for some help with this and find information about the change of the incorporation of xml file with a new entry for the non-breaking space of police and that has not worked either, which leaves me a bit confused.

  Flash does not support nested lists (as you know).  You can work around this limitation by using css and create your own styles of dash.  CSS have a property marginLeft, that you can use.

• Question about the migration of mass of files and permissions

  Hello

  I'm moving 2TBs of files from one external hard drive to another, but every time that I try to do a file mass transfer from one day to the next it eventually fail due to permissions for some files. I looked at the files on that he objected and I read and write permissions on them, as you would expect.

  What can I do to fix this?

  Try to run repair permissions and ACLs on your record. A repair permissions with disk utility does not have anything in your folder. Boot from your recovery partition now command-keys R in the menu utilities launch Terminal. In the Terminal, type: resetpassword , then press return.  (Note: you won't be reset password)

  Click the icon for the hard drive of your Mac at the top. In the drop down menu below, select your home folder. At the bottom of the window restore Home Directory Permissions and ACLs. Then, click on the Reset button. When the prompt returns to the command line, you can leave out Terminal.

• Question about BIOS for Satellite Pro A10 files

  Hello

  I have Toshiba Satellite Pro A10 and later yesterday, he won't, he past the TOSHIBA start screen and then black with a flashing cursor, it didn't leave me in advanced settings or the settings of the BIOS, a friend told me I need to Flash BIOS, I came across the site and found only a BIOS update and management told me to use the floppy drive , he said when I unzip the file I get an .exe file which I opened and it will give me three files, one for the CD ROM, one for the floppy drive and the third I don't remember, but it didn't happen, when I unzipped the files in a temporary folder, but I never had the files.

  I think I had to have it on my own laptop, and then it would be extracted properly, because my laptop does not work I can't do and even if I put the files on a disk, they are too big.

  Then...

  Where can I get the files from the BIOS that I can put on a floppy disk and then I can boot from that disk and it will fix the BIOS?

  Thank you

  Hello

  OK, follow these steps:

  Burn the file bios to CD on a CD, boot from it and update your bios. It's a simple and easy way. I Don t understand why it shouldn´t work, given that I ve updated my bios in the same way. I burned the image to CD and booted from this CD.

  Please answer perhaps you just made a mistake when you think to (I sometimes do too much, not often, but it happens..)  :)

  Welcome them

• Questions about the C:\WINDOWS\SYSTEM32\DRVSTORE file?

  Original title: File C:\WINDOWS\SYSTEM32\DRVSTORE.

  under the c:\WINDOWS\system32\DRVSTORE folder is displayed in blue, others are black. Why? is it safe?

  Compressed medium blue. Encrypted medium green. You can have one or the other, but not both.

• Question about the opening of JavaScript (.js) files in Windows Explorer...

  Hello.

  I write web pages with external JavaScript files.

  When I right click on a file in Windows Explorer .js, I get a choice when selecting menu "open with...". » :

  -Microsoft (R) Windows Based Script Host

  -Microsoft Visual Studio

  -Notepad

  Nothing happens if I select the first. What is the first listed selection? Is this something that should have come with Vista?

  What to keep in mind, is that JavaScript is coded in the web pages, for example in HTML format.

  Go to a web page, right click on the white space and choose View Source and you will see the words such as JavaScript and function. If you look at the coding of the function, you should be able to recognize the commands.

  Good luck with the coding.

• Question about the configuration of virtual computer file and the working VM location

  I noticed one of my virtual machines had two data warehouses listed under "Items" in the vSphere Client.

  After some research autour, I found the virtual machine files are in the correct data store, but the 'VM-configuration file' and 'Place of work VM' are in another data store.

  Can I combine all in the same database?   I'd rather have the config and the workplace on ma who has a lot of main storage.  For some reason, the configuration file and the location of work were created on a local storage on my host.

  Any suggestions?

  Thank you

  David Moore

  You can use Storage vMotion to migrate only the virtual machine configuration file to the desired location, just start the wizard of vMotion and storage step 'Select the data store', click Advanced, and you will see the option to select a new destination for the configuration file data store.

• Question about the display of what log file mapped in LogFilter agent

  Hello

  LogFilter agent allows you to have up to 4 different log files (and paths) to match strings in the list.

  Is there a way to make a rule that kicks in when there is a match of logFilter - to have access to what filepath had the match?

  So, for example if I have;

  /path1/server.log

  /path3/server.log

  and if the rule that fires when the logFilter has a match, I would like it to show which of the 2 filepaths contained the game.

  Thank you

  "mark".

  Hi Mark,

  The default LogFilter rule creates an alarm that contains the path to the log file of the execution of the variable of severity level "text".

  This script uses "entry.get("LogName")" to extract the name of the log file, which is displayed in the Message field of alarm and the alarm dialog box as well as the text that triggered the alarm:

  

  Kind regards

  Brian Wheeldon

• Question about the Structure of the InDesign files

  I had an interview Friday for design work and they asked me to send them a file InDesign stripped without photos or anything, just a file in order to check the structure of the file and see how I set up my files.

  1. What is the structure of files right?

  2. What do you think they are looking for?

  3. How can I send them?

  Thank you!

  I would like to provide the following:

  Bleed Setup (usually specified comme.125 inches for commercial printing)

  Layer stacking order (Z) (to see if you know how a document flattened)

  Margins and columns (mainly for multi-column Documents)

  Page Setup (spreading if facing Pages or single Page is needed)

  I would like to start with 3 layers listed of how they appear in the Layer palette:

  Text (this stays on top to counteract the effects of transparency)

  Images (this layer is used for images or a type with transparency effects)

  Background (I create a rectangle of size of purge with a background and outline of the default none)

  If including the text:

  Give an example of:

  Paragraph and character styles

  Nested styles

  BONUS: Grep Styles

  I have also to create a group of mixed some sort and dieline inks using a spot color and super.

  It can impress if you included Rich Black if necessary.

  All of this would show them your knowledge of Indesign and Print Design

• Question about the impact of a data file missing

  Oracle Version: 10 gr 2
  
  
  If a data file (not a data file belonging to the tablespace SYSTEM or any other data file associated with Oracle Internals) is lost, I can bring the database up somehow?

  Nichols wrote:
  Keita,
  What happens if I don't have a backup of the data file that is lost?

  OK understood

  If you do not have a backup of your database and that you have lost a data file, then you must re - create control file (which will contain the names of data inside files) without indicating lost data file name

  You must create the controlfile creation script and remove the line of lost data file name and create a controlfile. After that, you should be able to open your database successfully

  - - - - - - - - - - - - - - - - - - - - -
  Kamran Agayev a. (10g OCP)
  http://kamranagayev.WordPress.com
  [Step by step installation Oracle Linux and automate the installation by using Shell Script | http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

• Diagnose Net Services trace file errors

  Hello
  
  someone has a link to all of the documents where he explained how to interpret errors in Network Service trace files. For example, an excerpt from a trace file looks like this:
  

  [30-JUN-2009 14:32:39:302] nttcni: trying to connect to socket 1836.
  [30-JUN-2009 14:32:40:224] ntt2err: entry
  [30-JUN-2009 14:32:40:224] ntt2err: soc 1836 error - operation=1, ntresnt[0]=511, ntresnt[1]=61, ntresnt[2]=0
  [30-JUN-2009 14:32:40:224] ntt2err: exit

  I guess that ntresnt [1] = 61 ways means (from metalink DocId 67211.1):
  
  61 10061 WSAECONNREFUSED
  Connection refused. No connection could be made because the target machine
  actively refused it. This normally results from a tent to connect to a service
  is not active on the foreign host.
  
  
  But what of the other party:
  operation = 1, ntresnt [0] = 511
  
  Does anyone know what 'operation' and the average of code '511 '?
  
  
  Thanks in advance for any response.
  
  Kind regards
  Swear

  Look at metalink Note 156485.1 "review Oracle Net Trace Files".