Question about Flash 10

Similar Questions

• Adobe Flash and other questions about Flash crashes

  There are several cases of Adobe Flash crashes if I use Firefox, IE or Google Chrome - browsers and simply reload the page corrects this BUT repeats again and again.

  I am running Windows 8.1 64 bit in which the Flash program comes apparently integrated in the operating system as a hybrid 32/64 bit. When I inspect the add-on version Flash in Firefox, and an audit of the update, Adobe points out, correctly, that my system is 64 bit, English, Firefox Windows. Then when I do the same thing in Windows Internet Explorer, by checking the version shipped, I get a message that KB2999249 is available as a download fix Flash problems in Internet Explorer. Since this installation, the Flash has collapsed in IE [yet].

  So my question is: How can I be certain that when Firefox reports that Flash is "day" that he is indeed a version 64 bit compatible? Note that the download from Adobe site identifies only one version available for Firefox, IE and Google - the current version is the 15.0.0.152 file: NPSWF32_15_0_0_152.
  The "32" in the file name part suggests that it is a 32-bit application and, if so, where can I find NPSWF64_15_o_o_152 [if exists]?

  edited the title of this thread to reflect questions

  I check my addition of the Manager of ons regularly, even obsessive. I still have the last flash.

• Basic question about Flash CS5 Pro

  I apologize for my question here but I couldn't find a Forum so basic Flash where my question would be held. I'm editing my AVCHD in CS5 movies and tried to add some animations with Flash. After two days of hard work, I managed to create a SWF file to a motion tween that I could add to PrPro: the SWF is a card on which a ship (vector) moves from one port to the other. (I managed to size, modify the movement, etc.). So far, is good. I am stuck at the next step: I would like to move the ship at the next port, after it remains to the present for a few seconds, but I can't handle this. I can add a timeline and a new motion tween, but the ship won't be exactly in the same place where she ended the previous trip. I don't know that there must be a simple solution. Also, I have a few questions (very primitive) that I have post in the appropriate Forum of Flash (if I find). Sorry for the long post and I'd appreciate any help. LACI.

  Well, from http://forums.adobe.com/index.jspa I see 7 forums starting with Flash

• Question about flash commitment on D 70

  In the reading and to test the pop-up flash it seems that the flash fires off the coast if the camera detects the need for light. What happens if I want to add a bit of light on the subject, even if the camera thinks that there is enough light. Is it possible to have the flash go on even in apparently well lit conditions? Is this possible with the help of an external flash on the claw? I normally like to shoot at the shutter speed of 1/1000 or more.

  I am interested in using this type of feature on wildlife where I meet often suboptimal light or backlit conditions. Attachments can be obtained for external flashes and the pop-up flash that helps project the light a distance where my need to get the flash fires at my will and not the camera.

  http://www.Dummies.com/how-to/content/how-to-choose-Flash-modes-on-a-Canon-EOS-70D.html

  The link above should provide you with enough information to respond to your concerns.

  I hope this helps.

• Question about Flash PLayer updates

  Hello

  I run a network of very small size for my office and recently, I noticed that the flash players that are installed on end user machines are not up-to-date. I think it's because they don't have local administrative privileges on their computers. I don't want to give them just local administrator rights update the flash player, so I wonder if there is an easier way to manage the updates that must be installed on the flash drives.

  Our network consists of some Windows Server 2003 with Windows XP isntalled on all the client machines.

  Thanks in advance.

  The 'official' way to do under the free Flash Player Distribution License:

  http://www.Adobe.com/licensing/

  Which will give you an EXE, you can simply paste on each machine (or a MSI file).

• MacBook Pro will not initialize. Question Mark flashing folder

  -Macbook Pro 13 "Unibody model 2009

  Hi guys,.

  I have been a frequent visitor to the community of support here, but I'm a poster for the first time, so please forgive any lack of post I suffer from the label. I saw this problem here much and seem me to always see the same advice to fix, but I have never seen anyone who treat the same symptoms I had with my camera.

  My question all started when I tried to save something for the reader, and he said to me "you are not allowed to save this destination" (something to that effect). Then it progressed to a question on my Macbook to spontaneous freezing. It would freeze just constantly and I always have to force offshore. When I would try to start the machine up, it's always 50-50 chance that it should start successfully, often welcomed by the famous question mark flashing folder. I constantly by visiting an Apple store for the last year and a half on this topic and after countless visits, they insist that there is no problem that they can find. They always say down to "permission error", problems of BONE that have been resolved by resettlement and a faulty hard drive. I've dealt with them during this period and and still have this machine properly repaired on any occasion. The problem persists always just after I take the machine home and start right away, its still there.

  As time went on this issue, I noticed that the machine would often freezing when moved, for example moved a table at my knees etc. This has some time until that I have raised to clean the table under one day and then tried to do turn on and nothing. The machine refused to start, only to give me the question mark flashing folder. I tried to boot into recovery mode by using CMD - R and tried to reinstall the OSX, I read that it is a common solution, but whenever I start recovery mode "Macintosh HD" is not where. So I can't even try a reinstall of OSX.

  A man IT in my former work place had examined this issue before on another machine, and he said he had replaced the cable of HDD of the machines as the previous was damaged. When toggled, he said that the machine was working fine. It would be logical, as if the cable is already damaged and loose, I'm sure that the movement might just disconnect. I raise this issue because it is of NEVER once offered all the time, I in dealing with this issue and on further investigation in the apple forums and this seems to be a very common problem.

  

  This appeared on a boot up once and never since.

  

  And that's what I see at every boot up to now.

  I'm sorry to bombard all the world with so much information on this subject, but my frustration is quickly turning into madness on this issue, which have no one at Apple after countless visits being able to fix the problem. As it is the main culprit for me, the HARD disk cable, but I would not assume know better that some of you have known many more people.

  Any information or help that guys could pass my way would be greatly appreciated I was apparently no help from Apple repair personnel. If you have read and thought about all this I applaud you and owe you a drink at the mercy.

  James

  MacBook Pro

  Hi Yogi Wynne:

  I agree with your friend IT. Looks like the SATA hard drive cable has problems.

  The inside of your computer is not as smooth on the outside and rubs it hard against the SATA cable and can cause one of the traces in the short cable is causing hard drive problems.

  Here's where you can get a replacement cable, they are very fragile. https://www.iFixit.com/store/Mac/MacBook-Pro-13-inch-unibody-mid-2009-mid-2010-H ard-car-Cable/IF163-013-1

  Here's a video that shows what could happen. https://www.YouTube.com/watch?v=Amg5w0rlwDo

  I might change the SATA cable and see if the problem persists.

• Can question about a possible question, I do it my way?  The end result really me the measure of success?

  I have a question about a theoretical question of the VCAP (specifically the example below).  I could do it is a flash by going directly to the host instead of using the stinking vMA and resxtop, I've always will mark the full points by my way?

  "

  Scenario 11

  < Return | Next >

  Scenario:

  On a specific host of ESXi, a set of virtual machines is not good. You intend to determine the root cause. To do this, you want to collect usage data of resources at a level more granular than vSphere Client performance graphs can provide.

  Requirements:

  • Use resxtop to collect all the statistics for 2 minutes every 3 seconds.
  • Export the data to a CSV file called results.csv.
  • Import the results.csv file in the Windows performance monitor.
  • Use Windows performance monitor to indicate the time of CPU ready for all the virtual machines on the 2 minute period.

  Environmental information:

  • ESXi host: Home - 01.lab.local

  VDCA510 goal: 3.4 use Advanced vSphere Performance Monitoring Tools
  VDCA550 goal: 4.1 use Advanced vSphere Performance Monitoring Tools

  Guide reference (s):

  • Chapter 4 - using vSphere Advanced Performance Monitoring Tools - Interactive ESXTOP, commands and Modes of Replay"

  I'm under the impression that it was some sort of bug, fixed now, thanks to you guys useful...

  urgent vMA, would appreciate your help VCAP is tomorrow.

  Always extremely frustrating in the circumstances

• Question about moving linked clones

  I have a question about moving around related clones. Here is the configuration:

  PC running 7 Workstation and has an image of Windows XP existing on this subject.

  PC B 7 Workstation is running and also has its own image of Windows XP on it.

  I create a clone linked image on the PC to XP and create another clone bound B PC XP image that is out there.

  Now, I know that as long as the linked clones can access their parents, they will work very well. My question is, how is it that when I Exchange clones related - i.e. copy clone related, I did on the PC and put it on the PC B and copy the linked clone, I made on PC B and move it to PC A - how to make these two linked clones still work fine? They connect to a parent, but not the parent of origin where they have been cloned. It is tested and working 100% with absolutely no problems or problems at all. Can someone explain this to me please? Thank you!

  Can you please tell me what it means CID?

  Each virtual disk (basic and Flash disks disks) has a unique identifier (CID). A virtual disk of the snapshot also contains information on the CID to his record parent (parentCID) to ensure that the drive chain is consistent.

  What happens if you work with a linked clone and let's say in this XP image, you install a program...

  A linked clone is equal to a snapshot. Once you create a snapshot, all changes are written to the instant vmdk file and the parent remains intact vmdk file. As long as you provide the same disk parent a clone or snapshot, you can copy it as you like and the newly installed applications will appear because they are actually stored in the instant vmdk...

  See http://kb.vmware.com/kb/1015180 for more details on the functioning of the snapshots

  André

• Question about the tools Panel...

  I have a question about the Panel edge tools animate:

  In the future, edge animate will have a rich set of drawing tools? At the moment, so wanted to have a symbol, lets say a 'dog', I would have to draw everything first in Illustrator or Photoshop, and then import it into Edge animate (because EA basically allows me to draw rectangles and circles only). In future versions, will there be tools like 'Pen tool' or 'Gum' and other drawing tools know Flash Professional to create symbols?

  Thank you

  JH

  Hi JH,.

  Sorry, but we can't comment specifically about whether or when any functionality in the future versions of edge animate. What we can do, is listen to feedback from our users, and to add feature requests for the EA team who can be considered for future versions of edge animate.

  When new releases are published, there is also a list of the new features added... so stay tuned!

  Thank you

  Joe

• A few questions about the making of the animated for a site Web Nav buttons

  Hello, I have a few questions about creating some animated for a NAV buttons.

  There are 2 actions I want to trigger on pouting above.

  If I want to use a static (PNG) image I created in Photoshop for the real button, can I use that? I want well drag the button down on the passage of the mouse and drag upward on the mouse. If I push the part of the "Web" button (sorry, that it comes from a Photoshop guy) it will disappear in the final animation? Another way to say this, if I put something lively off the coast of the white area, it no longer appears in the movie (.swf) when it is published?

  For the second part. You can see a bit of what I want to do if you look high Nav of the page of the website: http://www.photoshopsupport.com/index.html

  I need the 'light' above the button and it's going to be on another < div > color so I can't put a solid color of BG for my flash document. But I want to get the effect of the 'bar' lighting up above the button and the real key slide downwards to pouting on.

  You can provide any help would be greatly appreciated.

  We target the dynamicaly graph. Since the MouseEvent is now on the invisible sprite and not the graph itself, the one-for-all function has no reference to this graph. You can access the invisible sprite with event.target (or event.currentTarget), you can also target the chart because we declared "mygraphic" custom property to serve as a reference for the graphic. Thus, event.target.mygraphic is the benchmark for graphics.

  Of course, this is just an example. There are other variations of this trick.

  ____________________

  Design Cyboide

  Web site creation

• Question about JavaScript

  Dear community,

  I have a question about how Google, Bing and other search engines respond to JavaScript. I have a slideshow on my site that I built with JavaScript, without any Flash. Now Google & co. read the links and the text out of it? Please take a look at the slide show:

  http://version4.movie-infos.NET/MI35/index.html

  Thank you

  MC

  If you can see the links and text in the source of the page when you navigate to it on your site, then it will be a search engine.

  Assuming that you are talking about this link-

  http://version4.movie-infos.NET">."

  and this text-

  Tron: Legacy
  Unsere Kritik zum Sci-Fi-event

  So yes - she is visible to both you and the search engines.

• question about _root.stop)

  Have a question about the _root.stop ().

  I pause and play characteristic in a flash player so that the user can stop the presentation as well as all the voiceover that flow with the presentation.

  I used the _root.stop () in the flash player in the hope, it will stop the main timeline, but also other incorporated a movieclip timeline. He stopped, the main scenario, but not the others.

  How to stop the two timelines simultaneously? the _root.stop () did not work for me.

  Thank you, Brian

  for the other clips that you want to stop again, apply the stop() method.

  for example, if you have a movieclip on your with instance name mc1 _root timeline, you can use:

  _root. MC1. Stop()

• Question about NetConnection and RTMP / RTMPT connectionsWWell

  Well Hello FMS forums out there again!

  My problem:

  I am building a video chat application and I have a friend behind a firewall which does not connect when you use the RTMP protocol, but if I change the url of net connection to use the RTMPT protocol it is able to connect.

  The question:

  Flashes automatically switch to RTMPT if it cannot establish a connection over a regular RTMP connection?  Or will it arrive at a way to do it myself?

  I am working under the assumption that the Flash first tries RTMP and if that connect not he try RTMPT... but then again, who does not connect to my friend unless I put it specifically as a url.

  Thanks again!

  I don't think so it's all about bandwidth. I have been really update to my previous post, but somehow it does not updated.

  You can also see this post: http://forums.adobe.com/thread/633753?tstart=30 - could also be useful.

  I suggest make you the connection with the specified port 1935 and see if you get a faster response if you get rejected or doesn't - you can try rtmpt directly - I mean this would save delay

• New in AS3: stupid question about event listeners...

  Hi all

  I am a newbie in Flash and have a question about event listeners. I have a site I'm developing with a movie clip navigation which is composed of several buttons. What is the right way to write the event listener?

  Here's a sample of what I have:

  I have a clip called 'buttons_mc' that contains the symbols of individual button with various names such as "btn_history". So far, I don't have an instance name for the clip of the film itself.

  My event listener:

  btn_history.addEventListener (MouseEvent.CLICK, history);

  I have to put something before the "btn_history" which refers to the video? I get this error message:

  1120: access of undefined property btn_history.

  Thank you!!!

  Julia

  Yes, it is preferable to have at least one layer dedicated to actionscript.  I often use a couple... one for code shared (functions and variables) and a level of the frame code (stop(), etc.).

  The code must be in a scenario where the button is directly accessible.  If your button is accessible in frame 1, which means that it does not animate in place such that it is not really intended to be used until you get somewhere near the bottom of the timeline, then you can target the button of the timeline that holds the buttons_mc movieclip.  So as I described earlier, if you give this movieclip an instance name of "buttons", and then to assign a code to the button on the inside you should use...

  Buttons.btn_history.addEventListener (MouseEvent.CLICK, history);

  But if the button exists somewhere down the timeline inside the buttons_mc due to the animation of the button, which means that there is more than one key image for the button, then you must place the code that you have initially shown in the last keyframe to the bottom of the timeline where he set the button in place.

  .

• I have a simple question about the meta-data.

  Hello. It is a simple question about the meta-data. How can I get the video bitrate of a flv or mp4 (video playing via NetStream file) file

  right now I have this:

  Code
  var netClient:Object = new Object(); netClient.onMetaData = function(meta:Object) { for (var in meta props) {} trace (props + ":" + meta [props]); } MovieClip (root) .durations = meta.duration; trace (MovieClip (root) .durations); }; NS.client = netClient;

  And my output is:

  videocodecid: avc1
  audiocodecid: m4as
  aacaot: 2
  Width: 960
  AudioChannels: 2
  videoframerate: 23.976
  TrackInfo: [object Object], [object Object]
  moovposition: 32
  avcprofile: 77
  audiosamplerate: 48000
  avclevel: 31
  seekpoints: [object Object], [object Object], [object Object], [object Object]
  height: 540
  Duration: 221.312

  As you can see, there is nothing of video bitrate.

  I know that the video bitrate of my videos, but then I have to manually type each number of bitrate into my flash project, and it would be such a fuss when I have a lot of videos. Would be nice if flash can detect the video bitrate.

  It's for my online portfolio.

  Why you divide by 8?  If you want to convert bytes into bits, multiply by 8.