Question about hospitality add to a Cluster workflow

Similar Questions

• Just a quick question about the appearance of the cluster

  Hello, this is Matthew, just a quick question about the appearance of the cluster

  Is there anyway to rearrange the order of the elements? I know cutting automatic resizing, I could move the items by hand. But if I use the cluster somewhere else, I have to move the items again...

  What I want is of the order of "Mx My Mz Ax Ay Az Temp voltage CS".

  Is there a quicker way to deal with?

  THz so much!

  You can right-click the border of the cluster and choose "arrange control cluster...". "The user interface is not as intuitive as it could be, but it will allow you to reorder items. If you use the cluster in several places, you should make the cluster in a type definition and replace all current uses of the latter with the type definition, so that they all match. They will also update automatically when you make changes to the type definition. Otherwise, you could have a situation where you have multiple groups with the same data types, but with elements in a different order, and your data will be getting a new denominated, when wire you the whole clusters. The data will be in the same order, but given that the item labels are in a different order, you can't get the data you want, when ungroup you by name.

• Question about unique to the VCS cluster driver

  I'm just configuration conductor for the first time according to the guide found here:

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/con...

  Because I need to connect to a VCS cluster with two counterparts, each counterpart must be configured as a separate with its own appointment IP address location, (in which case I guess I would add two IPs Rendezvous in the nearby area of VCS Configuration) or should I point to the VCS Cluster FULL domain name and I have an IP to unique appointment for all of the VCS cluster?

  I can't see anything in the guide on this subject...

  Thanks in advance!

  Hi Nick,

  Unique location pointing to the VCS cluster FQDN.  You are right the guide lacks details, will focus on opening a defect in the documentation for this.

  -Jonathan

• Hello Mr President! I have a few questions about the Word report generation please.1.How can I add a border to a page in word? 2. How can I add gridlines to a table generated related word?. Can 3. how I add a border to a picture of the Word report?. Thank

  Hello!

  Sir, I have a few questions about generating word reports using (C language in labwindows) please.

  1. How can I add a border to a page in word?

  2. How do I add border lines and grid to a table generated in Word report (not "cvi control table"inserted from gui, I wonder about the table generated in Word report)?

  3. How can I fill a table cell of report word with the data type other than 'character '.

  And sir a question on the use of the timer in labwindows cvi please.

  Sir, I'm trying to set a time minimum interval timer to 1millisecond (0.001 s), that I have set, timer cares about the interval set by me he only meets the minimum default time interval which is, I think as 10milliseconds (I'm using windows xp service Pack 3 version 2002).

  Concerning

  Imran

  Pakistan

  Have you read this statement ? It explains how to set the registry value:

  If the REG_SZ useDefaultTimer does not already exist, you must create it under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\CVI Run-Time Engine\cvirte. "" This can be done navigate to the appropriate folder, and then click Edit "New" string value. Then, click on means the name of the new value created, select Rename, and then specify useDefaultTimer as the name. Finally, double click on the name and specify the value True or False.

• Questions about the implementation of clusters of storage and DTS on active cluster

  I have a few questions about the implementation of clusters of data store and SRS storage in VSphere 5.1.

  We have a data center with about 15 HP blades and a few servers non-lame.  The hosts are all either VSphere 5.0 or 5.1.  Our back-end storage is an EMC VNX 5700 with about 20 stores of data.  All the VMWare is managed by VCenter 5.1 running on a dedicated physical machine.

  Currently, each data store is used individually; No piles of data store are put in place.  When a new virtual machine is created, the administrator usually chooses the data with the most space store.  Periodically, we will go back and manually storage vMotion machines to balance the load.

  Recently, we have expanded the VNX storage, so we now have LUNS in different pools, with different levels of performance.

  What I would do is set up for the data store clusters, so that us when a virtual machine is created, the administrator must not know what data store is in which pool.  Also take advantage of the DRS storage so that the burden of storage will be "refine" himself a little.

  I know the setting up of a cluster of storage in a 'clean' environment is quite simple, but my concern is creation/conversion data warehouses existing in active production in the cluster, while they are used.

  If I access the screen "data warehouses and store data from clusters ', right-click on the data center and create a cluster, and then move the various data stores in the new cluster, will there be an interruption in the production running systems?

  I also wonder about activation of storage i/o control.  It is not currently enabled on data warehouses.  I know it's useful for the StorageDRS, but will be allowing any negative impact on the system?  If I turn on the warehouses of data, is there anything else I should do or set in addition to all that allows him?

  Finally, we are in the process of Site Recovery Manager configuration.  SRS has an impact on the configuration of the data clusters and DTS store?

  Thanks in advance for your comments.

  Mike O.

  Gregg Robertson wrote:

  Hello

  Clusters of data and using DTS store doesn't impact RS even if you create a cluster of data store for storage of replicated data and another for everyone else, this way you machines virtual you want to replicate are not moved on warehouses of data that are not replicated , but will still have the ability to move if there is a conflict.

  Gregg

  With all due respect but SRM and DTS don't go together. SRM does not at all support the use of DTS. So if you are configuring SRM forget DTS for now.

  Reason for this is that SRM knows no DTS and VMs can be in flight when a failover should occur, and bad things can happen. Also, the protection breaks when a virtual computer is moved between data warehouses in a cluster data store.

  In short: don't go there.

• A Question about debugging...

  Hi all

  I have a question about debugging - specific probes. Is it possible to link and save the values on a wire (with a probe) which is a loop for the loop counter (or even a secondary value)?

  When I'm debugging code to a state machine that I often more easy to wire to the top of the State and the value, I am interested in a cluster, and then use 'generation antenna' and a registry change to add this element to each loop. I could also do this by indexing just out of the loop too.

  Once execution completes etc that I can look at the table (either using an indicator or a problem) to see what has happened to the value to each State/loop. And often, I know exactly where my code was wrong.

  My question is: is there a way to do this using regular probes without having to build an array? So, for example, I probe a digital wire and get a table of responses rather than just the last value on the wire?

  Thank you

  Dave

  I found this nugget that does exactly what I want - it's a custom probe developed by Darren.

  This post on the Exchange of ideas gives to think it should be at least provided with the package LV either integrated in the dev environment. Well worth voting for!

• Question about partitions on Equium A100-027

  Hi all!

  I'm new to the forum but have been hidden for a while and he thought at the time that I said "Hello".

  This and the fact that I have a question about my laptop Satellite A100-027.
  The hard drive on my laptop seems to be divided into three partitions = Vista (c) / data (E :) / WinRE (d) with the WinRE (D :) is quite small but others, quite large.))

  My C drive is up to 3 that GB free with about 35 GB of free data (E :) is possible to merge these two to give me a big drive? And if so, how?
  Please excuse my ignorance, but it seems impossible to me to "get my head around" this thing hard drive and would split the a large hard drive.

  Any help would be greatly appreciated and once again, Hello to all.

  Hello

  As the user previous already said, you can manage HARD drive partitions in disk management settings.

  If you n t want to have a data partition (e) then you can try to delete it in disk management.
  Then you can add this empty space of the HARD drive for other partitions on the HARD drive.

  But note; the empty space will be placed at the end of the HARD drive. I don't know if your C partition is placed as a second HARD drive partition, but if so, then it should be no problem to add empty space to partition C (System) of m.

  Concerning

• Question about the size of the hard drive for the 11s Yoga

  Hello

  I have a question about my 11 s Yoga that I bought recently.

  It is advertised as having 128 GB SSD, but according to the PC of the information there are 101 on the C drive and 3.99 GB on the D drive. This only adds to 104,99 GB. Is someone can you please tell me where are the remaining 23 GB?

  Just to clarify, Go 104.99 is no space AVAILABLE, it's total capacity. The available space is only 67GB, which is not much at all I installed practically anything outside of a few documents.

  Thank you

  Empty your trash.

• A few Questions about the videos on my Sansa Fuze

  Hey all,.

  I'm pretty new with my sansa fuze (I only had for about a week), and I have 2 questions about 'videos' on the "rocket"...

  Any help in answering these questions would be greatly appreciated!

  So:

  First of all, on my sansa fuze, I see 2 folders under the section "VIDÉO", "Audio_TS" and "Video_TS". What are these folders and files ranging in what folder?

  Second, I tried to load this video (about 20 min. length) through the Sansa Media Converter on my sansa fuze. Now, when I try to convert my video to a Vob (a kind of file extension), the appropriate file type file (which I suppose is all .mp4), I get a message saying: "It cannot convert, because your Sansa player is not connected" (even though I know I plugged). Is there a way I can get the Sansa converter program around and just use a different software to modify the mjy .mp4 file, or what I need to use the Sansa Media Converter to do?

  Again, any help is appreciated...

  Thank you

  Rocket-4-Life says:

  Hey all,.

  I'm pretty new with my sansa fuze (I only had for about a week), and I have 2 questions about 'videos' on the "rocket"...

  Any help in answering these questions would be greatly appreciated!

  So:

  First of all, on my sansa fuze, I see 2 folders under the section "VIDÉO", "Audio_TS" and "Video_TS". What are these folders and files ranging in what folder?

  Second, I tried to load this video (about 20 min. length) through the Sansa Media Converter on my sansa fuze. Now, when I try to convert my video to a Vob (a kind of file extension), the appropriate file type file (which I suppose is all .mp4), I get a message saying: "It cannot convert, because your Sansa player is not connected" (even though I know I plugged). Is there a way I can get the Sansa converter program around and just use a different software to modify the mjy .mp4 file, or what I need to use the Sansa Media Converter to do?

  Again, any help is appreciated...

  Thank you

  OK two records don't matter to you. SMC (or any other program) place the files in there, so you don't need to worry. VOB files are not compatible with SMC, so when you rip the DVD, you must use a program like Any-Video-Converter to create an AVI file or a mpge (my recommendations). Rhapsody will also add videos to the "rocket" as well.

• Question about ActionBar on the first screen of the application

  Hi, I have a question about the actionbar behavior in the first screen of the application

  index.htm pushes immediately main.htm with actionbar. ActionBar clicks and responds correctly until I have add overflow on some buttons.

  When I click on the button of overflow, the overflow is displayed at the bottom of the page, the top of the overflow is put in correspondence with the upper part of the actionbar so buttons actionbar overflowing content is not visible.

  I reproduce this problem with the sample application.

  This is expected behavior? Is there a way around it?

  I was able to reproduce the problem and have connected it

  https://github.com/BlackBerry/bbUI.js/issues/329

• A few questions about FileConnection/JSR 75

  [I posted these issues some time ago, but got no response]

  I am writing an application that targets the 4.2.1 and upward. After reading everything I can find (api docs, forum, kb, guides, web search), I still have many questions about the BlackBerry file system:

  1. Are store / and SDCard / internal name of the memory and the SD card root on all BlackBerry devices?
  2. JSR 75 leaves open the question of whether an application sees the virtual roots that are private to itself or if all applications share the same roots. How does on BBs? I have seen many examples where the path name starts by "/ store/home/user/app_name /" or "/ SDCard/BlackBerry/app_name / '. Is this necessary, or can my request simply use "/ store /" or "/SDCard/" and add the file name? If the former, are there best practices documented anywhere to manage collisions between app names?
  3. If the files are visible in many applications, there are layers of security available to protect data (I think something similar to how a PersistentObject can be encapsulated in an object ControlledAccess using the PersistentStore) or do make us our own?
  4. I read on this forum somewhere that store / is not available when a device is connected via USB and mass storage is active. Is this and other information like this documented somewhere?
  5. May restrict the COMPUTER strategies how an application uses FileConnection, particularly to the store / and SDCard /? If so, is there any guidance on common restrictions that developers should know when you write applications for general use?
  6. What restrictions are there on the names of files (allowed characters, length, etc.)?

  Any guidance or pointers will be appreciated!

  Hi Ted,

  I'm not sure on your remaining questions, but I'll try to answer as best I can:

  1. did not have different names on the devices until today.

  2. you have no problem on SD card and you are allowed to save files anywhere it. Not quite sure

  shop around, but you should be able to save files on the file system visible and own created folders. There will be

  some folders inaccessible devices that require internal processing (installed Te of applications etc..).

  3. you can open files as readonly etc. but elsethere it is not the layers of security installed. If you have data

  issues of security, you must save this Te using the RuntimeStore class!

  4. I don't know, but it's a fact. But for this purpose, you can detect the toggling of mass storage

  programmatically.

  5 see point No. 3

  6 see restrictions as specified in JSR 75.

  Kind regards

  Jochen

• Questions about discussions...

  Hello

  I have a new app to do that requires network access.

  I have read this EXCELLENT post from peter_strange:

  http://supportforums.BlackBerry.com/T5/Java-development/connecting-your-BlackBerry-http-and-socket-c...

  Because I can't use BIS - B because I'm not a partner of the Alliance, I wanted to take a look at the new OS 5.0 network API and see how it works.

  I know that network connections should be performed in a separate thread.

  I'm far from being an experienced Blackberry developer... so I have a few questions about discussions.  I looked around the Internet, read on the forum, read the documentation, did some tests and so far, I came up with this code:

  SerializableAttribute public class HTTPConnection extends UiApplication {}
  Public Shared Sub main (String [] args) {}
  HTTPConnection PAP = new HTTPConnection();
  theApp.enterEventDispatcher ();
  }

  public HTTPConnection() {}
  pushScreen (new HTTPConnectionScreen());
  }
  }

  class HTTPConnectionScreen extends form {}
  public HTTPConnectionScreen() {}
  setTitle ("HTTPConnection");
  Add (new RichTextField ("choose a type of connection :"));

  final RadioButtonGroup = new RadioButtonGroup() rbGroup;
  RadioButtonField radioButtonF1 = new RadioButtonField ("Direct TCP", rbGroup, false);
  RadioButtonField radioButtonF2 = new RadioButtonField ("WAP 1.0/1.1", rbGroup, false);
  RadioButtonField radioButtonF3 = new RadioButtonField ("WAP 2.0", rbGroup, false);
  RadioButtonField radioButtonF4 is new RadioButtonField ("BES/MDS", rbGroup, false);.
  RadioButtonField radioButtonF5 = new RadioButtonField ("BIS-B", rbGroup, false);
  RadioButtonField radioButtonF6 = new RadioButtonField ("WiFi", rbGroup, false);
  Add (radioButtonF1); Add (radioButtonF2); Add (radioButtonF3); Add (radioButtonF4); Add (radioButtonF5); Add (radioButtonF6);
           
  FieldChangeListener listener = new FieldChangeListener() {}
  ' Public Sub fieldChanged (field field, int context) {}
  ConnectionThread ct = new ConnectionThread (rbGroup.getSelectedIndex () + 1);
  CT. Start();
  }
  };
           
  ButtonField buttonField = new ButtonField ("Connect", ButtonField.CONSUME_CLICK);
  buttonField.setChangeListener (listener);
  Add (buttonField);
  }

  / * method of onSavePrompt override default to avoid being asked if I want to record every time * /.
  protected boolean onSavePrompt() {}
  Returns true;
  }
  }

  class ConnectionThread extends Thread {}
  private int transportType;
  public ConnectionThread (int n) {}
  transportType = tt;
  }
      
  public void run() {}
  ConnectionFactory connFact = new ConnectionFactory();
  ConnectionDescriptor connDesc = connFact.getConnection ("URL", transportType, null);
  If (connDesc! = null) {}
  try {}
  HttpConnection httpConn = (HttpConnection) connDesc.getConnection ();
  httpConn.setRequestMethod (HttpConnection.POST);
  httpConn.setRequestProperty ("Content-Type", "application/x-www-formulaires-urlencoded");
  OutputStream out = httpConn.openOutputStream ();
  out. Write (Integer.ToString (transportType). GetBytes());
  int responseCode = httpConn.getResponseCode ();
  If (responseCode == HttpConnection.HTTP_OK) {}
  UiApplication.getUiApplication () .invokeLater (new Runnable() {}
  public void run() {}
  Dialog.Alert ("- SUCCESSFUL CONNECTION-");
  }
  });
  }
  If (httpConn! = null) httpConn.close ();
  } catch (IOException e) {}
  System.Err.println ("IOException Caught:" + e.getMessage ());
  }
  }
  }
  }

  In fact, this code works very well... but I want to improve it, and I have a few questions:

  1. I think that right now, every time I click on the 'Connect' button, I start a new thread. I would like to end this thread in the "run" method, but I don't really know how to access the variable 'ct' from there.   Counsel on how to do it?  Or maybe always use the same thread until my application is closed?

  2. in the FieldChangeListener of my "Submit" button, I want to access the value of radio box.  I did work, but I had to do my 'final' variable  What is the right way to do it?

  3 - to display a dialog box with 'Successful connection', I just wanted to write something in my main screen.  How I do that?

  I'm just a bit confused as to just what set up when you use a separate thread.

  Thanks for your advice!

  Edit: Hidden URL I connect to...

  That's what I call a good question! (now I'm wondering why the forums do not work with opera correctly, in any case, here my baldy to the answer format): 1. your thread "dies" when it's over, no need to close it. 2 Yes 3. You can use a reminder. See for example http://www.javaworld.com/javaworld/javatips/jw-javatip10.html

• questions about 2100 wlc and lwap connection

  Hello

  I have a few questions, I hope you can answer me.

  In fact, I have a controller connected to 3 Lwap 2100, and they are connected to the WCS. they have a static IP address.

  The distance between each point of access to more than 30 meters.

  1. the distance between the access points affect the accuracy or the stream. How can I calculate this

  2. because the APs use a static IP address, each customer should I connect to the network to add a static ip address? can I do the APs detect clients dynamically?

  I have lwapp reset guide, guide WCS configuration and configuration guide for WLC. If you have more documents or more pls share with me.

  BR

  Yamani

  Hello Ahmed,.

  Yes the distance between AP affect the wireless signal.

  to determine the best location of AP and the distance between them, as the site survey is necessary with the expert of the spectrum wireless or airmagnat...

  You can check the following links for design and RF management

  1) http://tools.cisco.com/squish/1Ea09

  2) http://tools.cisco.com/squish/51a58

  for other questions about DHCP, it is not a must that customer use static IP, you can always configure them with DHCP.

  as an extenal DHCP (like windows server), or on the WLC himself (to the title of controller-> > internal DHCP tab).

  Kind regards

  Talal

  =========
  Please note the answers that you find useful and mark as answer - when is it :-) - so that others can easily find

• Windows 7 starts questions about mac and office 2010 following an installation

  It's a long cut as short as vent. I've been miss sold a record of upgrade of windows 8 full disk-shaped, with norton and office 2010. My goal of creating windows on my mac for a course I'm taking. After that know I need windows 7, I bought it online. I created a partition of 80g on my mac charge windows 7, then norton. Until I loaded the office that I was invited to perform the update from apple in the windows software 7. Note before I installed norton, I load boot camp mac utilities according to the instructions. So, followed by all as should be. The prompt update from apple was quick time, iTunes and airport, I checked all and then updated. Then I loaded office 2010 and obtained throughout the process from the Microsoft site. On the last part of the installation, the installation failed due to a mistake of hanging iTunes. I tried again and again, I fixed the update to iTunes to add and remove the section of windows. Then, I got different errors. I decided to remove the whole score without uninstalling all programs again. When I get to the windows live, that this falls priming. I get various error messages whenever I try to start the process. As a header of Bank pool, fatal error and so on. Can anyone help? What is the damage?

  Hello

  Thanks for posting your query in Microsoft Community.

  Because the question is limited to Windows 7 on your Mac with Boot Camp, I suggest you contact Apple Boot Camp support for assistance.

  http://www.Apple.com/support/Bootcamp/

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Questions about the cost and the best specifications for a new Windows 7 computer

  Hello

  I got most of the things that I should include in the purchase of a new computer.

  Things proposed are the following: Please read and tell me if I need it, and the approximate cost.

  8 GB

  12 GB

  A TB

  VIDEO CARD BUSINESS... I'm QUITE CONFUSED as to IF I NEED. SEE MY QUESTION AT THE END.

  Video card: min. 99 (No. built in chip card (or is it... discreate) dunno... two options different which one.)

  Video card: should be mid to high range; at least at first.  They are beginning to take a long power supply

  supply; and can charge the supply too, so invest in a good to start with.

  Question: Can I add a video card later?  Right now I only use the documents and regular pictures.  Later I want to do

  videos of my pictures; not much more.

  LCD or LED display must be top natch; for Photo Editing/cropping or manipulation?  I do not understand what they

  Let's talk about it.     They speak the monitor?   I DO A LOT OF PHOTO EDITING

  PHOTOSHOP.

  Thank you, Zara3511

  A discreet (dedicated) video card is not necessary. You can always add more later if you need the extra graphics power. Its not harmful if you perform a task such as photos and videos. Benefits is its great for games top of range and can future proof your system. If you are working in Photoshop, certainly invest in the discrete video card. Photoshop she likes it.