Broken hard drive

It seems that I have a broken hard drive. Received the message, boot device not found 3f0. Ran the diagnostics and it says I have no hard drive. Has taken the drive hard on and put it back in and got the same message. If I put a new hard drive in what I have to buy windows 7 new or hp will give me the derivers? Also I never did it so what is the next step after installing the new hard drive? I have a 500 GB hp cell g6.

Thank you

You should not use those at all. I hope that you have a form any instructions on receipt of the CDs. All you need to do is start Windows using the CD and everything should go smoothly.

If you feel that my posts are to help you, feel free to mark it with a Kudos. Do you have other questions that I could answer?

Mario

Tags: Notebooks

Similar Questions

  • Broken hard drive and no Windows 8 sticker

    Hello

    I have a Toshiba laptop, * the HDD is broken * and when I bought did not have recovery disk. Nobody told me that I had to make a copy on the disc when the phone still worked.

    Now I have a new hard drive but does not have the recovery partition and LICENSE No. STICKER for WINDOWS 8!

    * What is the solution which gives Toshiba for these cases? * because I'm not ready to pay more than 30 for a CD that should come into the computer, and I will not pay a new license of Windows 8, because when I bought the computer and I paid!

    > Nobody told me that I had to make a copy on the disc when the phone still worked.
    Please do not be angry on me, but this isn't an excuse for your problem. Each laptop model comes with manuals of the user document. It is also saved on your laptop computer in PDF format.
    It is clearly describes what recovery image is and how you can save it and create recovery media.
    I don't know where you bought your laptop, but if you bought in some electronic stores I think you should talk with your dealer and tell him that you are not satisfied with their expert advice.

    You're right about the license. With your computer laptop, you bought OS and valid license but the product key from the sticker can be used for the activation of the operating system if you are using the Microsoft installation disc. This product key is up to the original recovery image that you got with your laptop.

    On the one hand, I understand, but you must also understand that, generally speaking, it's your fault. In these cases, toshiba offers just the solution and you can get the original image of recovery for your laptop model. It costs 30 euros, but with this money, you'll get bones, all necessary drivers, tools and utilities that need not be configured. Maybe two hours after you have perfectly install OS with all the necessary drivers.

    How much is Microsoft version if you do not want to order the Toshiba recovery image?

  • test code doesn't have a hard drive (305) made this means broken hard drive

    I did diagnostic check laptop cos running rough. get message saying failed the test of hard drive full hard disk1 (305)

    This means my hard drive is broken also get rather awkward ideas noise type please?

    Hello

    305 error code is a failure of the complete (Full) disk Self Test (DST) and would indicate that hard is defective and must be replaced.

    If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and the laptop Nr - see here for an explanation.

    Kind regards

    DP - K

  • Impossible to uninstall CS6 on broken hard drive in MacBook pro

    My hard drive on my MacBook Pro 2 years, beat and no longer works. I bought initially at Oregon State University. I backed everything up, but the only problem is that I can't uninstall Design & Web Premium CS6 from the hard drive of the laptop is broken. I replaced the hard drive with a new one on the Apple Store in Fukuoka City today (I can provide the reception if required). I intend to buy a new computer someday. However, if I install the repaired CS6 on my laptop, it will be counted as a second activation. Is it possible to get an increase on the number of licenses on an exceptional basis? I spent so much money by buying the Design & Web Premium CS6, I won't go to waste.

    When you have a non-functional computer and cannot turn off

    Don't forget to request ONLY activation support set your number of activations

    Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990

  • Broken hard drive - new installation (3 license?)

    A few years back, I bought 3 ACS. And istalled it on my iMac and a laptop-I used my two licenses. Now the hard drive on my iMac has been replaced because it was broken after the tipping of the table.

    Question: can I register online without losing my license? Adobe recognizes my iMac?

    Thanks, mat

    The key word is 'enable '. You can have two copies of the Creative Suite enabled at the same time. Probably, you will have no problem since you don't have the ability to disable a drive that has been damaged. If there is a problem, the activation dialog box will give you a phone number you can call to activate your iMac.

  • Re: Satellite C850 unbootable - broken HARD drive

    Hello people,

    I bought a * Toshiba Satellite C850 - 1F2 * with * + Windows 8 + *.
    After installation, the upgrade to * + Windows 8.1 + * and setting up everything, the whole machine worked well enough.

    BUT since yesterday, the laptop no longer starts!
    When I turn it on, the HARD drive is click and click and the system tries to boot from DVD, USB, HARD drive, IPv4, IPV6, and then he said, that there is no boot device.

    Unfortunately, I tried to do the + restore Windows 8 - backup - DVD + this weekend!
    Huh!

    Well, I have one more * + Windows-7-DVD original and license + *, which would be good as well (I used it in recent years).
    * YET *, I can't install * + Windows 7 + *.
    He says something like that, that this system is not available for Secure Boot +.

    I read about 'Secure Boot'.
    So I pressed F2, turned on the laptop and managed with this BIOS.
    It's a * + InsydeH20 Rev 3.7 + *.
    * BUT *, when I go to "Boot Mode" I don't see myself, this option is grayed out and I cannot change the UEFI Boot + to ++ CSM Boot +.

    Even changing the HARD drive made no difference.
    I put in my old HDD with Windows 7 installed (which works in the other laptop), but the system does not start, because it is + not suitable for Secure Boot +.

    * Then, of WHAT NOW? *
    I mean, we can't really politics of Toshiba, you need to take your laptop, if the HARD drive breaks, it can?
    Because I create the rescue-DVD, I just my DVD of Windows 7 and an another HARD drive and installed Windows 7.

    I have to buy another license of Windows 8 and an another disk to reinstall Windows 8 (suitable for Secure Boot)?
    Would it even work like that?
    Or is it possible to upgrade the BIOS for it, I can then change boot UEFI to CSM Boot?
    Or is there another chance, to use my other HDD with Windows 7, or at least a new HARD clean disk, on which I can then install my Windows 7 operating system?

    I hope someone can give me good advice, what to do now... without throwing the Toshiba laptop ;)

    Thanks in advance!

    > I hope that someone can give me good advice, what to do now... without throwing the Toshiba laptop
    Let's start with this sentence. You must not throw your laptop. There's always a last stage that can be done and in your case, you can contact the nearest Toshiba service provider and ask for help.
    This model of laptop is fairly new, so I can imagine that the warranty is still valid, so I think you should contact the service and ask if you can get a new HARD drive for free. I mean why not if the warranty is still valid.

  • Broken HARD drive and no recovery disk

    Hello, everyone!

    My husband bought a new laptop a few months before and the fact that US aircraft not only any what rescue DVD, we na not create a restore disc, understand us, that we had a lot of time... Except that yesterday one of the dogs was caught in the power cord, and the laptop fell on the floor. Of course it wouldn't restart and the BIOS would not recognize the HARD drive.

    Using an adapter, I was able to connect it to my own laptop and all data and files are displayed. My question is, being able to access my own computer HARD drive, I can create a disc of recovery there and how? Cause when I select this function on my computer, it does not give me the ability to choose which drive I want to create the disk, it assumes I want to do it from my C: drive.

    Thanks in advance.

    > My question is, being able to access my own computer HARD drive, I can create a disc of recovery there and how?
    As far as I know that something like this will not work. For recovery, multimedia creation, you need to use preinstalled Toshiba recovery media creator tool. Saved on the HARD drive recovery image is marked with so-called markers and this tool can find the exact position of the image stored on the HARD drive. Please note that it works under normal circumstances. When your HARD drive is connected as external, this tool can not find it and recovery media is not possible.

    In my opinion, you have a problem with your machine. You know if the HARD drive is not properly recognized that I'm afraid that your laptop has a serious hardware problem and it must be checked by the Toshiba service provider.

    I mean, you can have a recovery media, but it is useless if the HARD drive is not recognized by the system.

  • HP Envy 15 t-j100: broken HARD drive zero insertion force (ZIF)

    Hello

    Hoping someone can provide me with information on where to find the small strain relief for my ZIF HDD connector. When going on a failing HARD drive, the clip on the restraint ZIF connector broke and is no longer usable.

    Have been unable to locate this part on the web. Have seen some forum info (not HP) indicating that the motherboard should be replaced. Since the little clip ZIF simply snaps into the socket, I should be able to replace just the restraint plastic little clip without having to replace the motherboard...

    Photo showing part I'm trying to locate. (see area surrounded by a red circle in the picture)

    Thanks in advance for the help.

    Chris

    @ChrisAlb,

    Hello and thanks for the display on the HP support forums.  For this kind of information, you should contact the HP support by phone.  Please, use this link to help that.

    Contact HP support.

    Please let me know how things are going.  Thanks again for the post and have a great day.

  • Broken hard drive repair/replacement

    My 2 year old g580 Lenovo specifications had a hard drive failure where the use of the disc works 100% or at a constant pressure, even if it is inactive. I thought it was a problem too so I bought a Lenovo approved hard drive. Then I read that the OS is attached hard disk.

    I was wondering what course of action, I must take, I read that it is possible to migrate the operating system with some 3rd party software, although it seems a little fishy and I would rather see my alternatives. Is there a way to have a windows replacement drive sent me, or another way to get windows on my laptop?

    Then the product key shoul is a chip on the motherboard.

    If after installation of Windows 8, it should detect the key of the product itself.

    You need only install the new hard drive in your system and install windows 8.

    http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  • My broken hard drive, my laptop came with xp pre-installed, how to install xp on my new HD

    My laptop sony vaio hard drive has been damaged. I intend to install a new hard drive, but how do I reinstall windows XP as it came pre-installed on my computer.

    for example, I have a sticker of the product license, but where can I get a copy of windows XP to install?
    Any help is welcome.

    My laptop sony vaio hard drive has been damaged. I intend to install a new hard drive, but how do I reinstall windows XP as it came pre-installed on my computer.

    for example, I have a sticker of the product license, but where can I get a copy of windows XP to install?
    Any help is welcome.

    Contact Sony and ask them if they can help you. But realize that since XP is now essentially obsolete, there is a good chance that they are unable to help you. You will need to find a used copy, you can buy.

  • How to reinstall the operating system after the broken hard drive partition?

    Hey guys, lately my HARD drive goes down, during the factory restore. I install a new blank HDD in your computer now. I can see my old HARD drive recovery disk, but cannot get it back.

    I have finished the form of recovery disk, but my warranty expired a few months ago as :( I have the product key that came with my cpu, which is window 7 Home premium. You are not sure if Dell will send me a recovery disk, if I have to buy a new window, or if there is some way I can restart the recovery partition?

    You can perform a new installation using a .iso from Digital River and the program ABR:

    http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/Windows-7-SP1-ISO-download/

    http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows-7/Microsoft-product-activation/the-activation-backup-and-recovery-program-Windows-7-version/

    For the old disk, you should try using Fedora data recovery:

    http://dellwindowsreinstallationguide.com/data-recovery-using-Fedora/

    See the Windows reinstallation Guide / A Clean install of Windows 7 for detailed installation instructions:

    http://dellwindowsreinstallationguide.com/

  • Replace broken HARD drive: need a

    Hi, I have a desktop HP Pavilion h6310y, Win7(x64). 6 GB ram, 1 TB WD HDD.

    The drive has crashed. He was giving me problems for a while now, but now he's dead. I ran diagniostics standard hp bios on it.

    Error code: BIOHD - 1

    Error: Fail to communicate with the device.

    Contact HP support.

    The computer and the drive is out of hub, so I'll just have to replace.

    I can go to Amazon and buy a.

    But my question is:

    1. do I need a disk with Windows7? (I have no cause).

    The computer would have a partition on the hard disk with it.

    2. I did the DVD of recovery before it crashed, as the system image on the external hard drive. This will be enough to reinstall?

    or I have to order DVD of Win7?

    3. How can I order the DVD if I need one? I wanted to call HP and ask, but they will supposedly, charge me to ask, because I'm out of warranty.

    Thanks in advance for your help.

    Michael

    Hi Michael,

    To answer your questions in order.

    1. everything you need to buy is a new hard drive.

    2. you can use your recovery DVDs to reload the operating system on the new HARD drive, or the best option would probably be to load the Disk Image as this will reload Windows in the exact state wherever it was when the image was created.

    3. If you ever need to, you can order a set of replacement recovery disks using the link below.

    http://support.HP.com/us-en/document/c00810334

    If you have a problem with this link, order them directly from HP.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    Kind regards

    DP - K

  • Recover from a broken hard drive

    Hello

    The hard drive on my iMac has stopped working so I had to replace and the operating system, restored to the BONE X10.99.5.  I restored everything from my backup and everything seemed fine until I tried to use Photoshop CS5. At the opening, I get a message "Could not synchronize the color because of a program error settings" program seemed to work correctly (obviously never used all tools, settings, filters etc in a limited time, but what I used was OK)

    When I tried to print the program collapsed and gave a situation report which he claimed has been automatically sent to Apple.

    Any suggestions on the problem and how to sort?

    Thank you

    John

    HI again

    I have now solved the problem by using the "system recovery" with my last backup I knew worked. He completely erased the disc and reinstalled the system from the backup drive, so everything now sees to work exactly as before, including even my old 'Historic' Safari and Photoshop tools settings.

    Thanks for your advice but I am now happy back where I used to be.

    John

  • How to disable the instance RH7 on broken hard drive

    Hello

    Emergency call to anyone online right now! My hard drive went pop last night I installed and activated a copy of my TC on a computer at work today with success. Now, I'm home, I installed a second copy on another computer so I could catch up with some work, but of course I can't activate it (such as only two activations are allowed).

    Technical support has now gone home for the evening, and I can't find another message on the forum with the same problem, so I hope that there are online some kind soul who can help me get around this problem.

    If I run the version of 30 days, should I have all the available features, record, etc.?

    Thanks a lot for your help.

    Liz

    Cannot be moved.

    You have all of the features with the 30 day trial and it will work on a PC that did not have a previous installation of the same version.

    To activate it, you should communicate with the guys from activation.

    http://www.Adobe.com/activation/PhoneNumbers.html

    Just explain what happened and they will get you going again.

  • Hello, I need to re - install lightroom as my broken hard drive 6: How can I do?

    I already have a license for Lightroom 6 but I need to re - install: How can I download

    Hello Philippe,

    because you have a license (for a single App licensed product?) could yu charge towards the low LR6 of

    https://helpx.adobe.com/creative-cloud/help/download-install-single-app-Lightroom-6.html.

    To be convinced, you should take a look at database of Adobe, to see what is stored/recorded on your accounts. You will find general information on your account Adobe https://accounts.adobe.com/> see My productsView all the > these products are associated with your Adobe ID > name > serial number.

    And to find your serial number have a peek here

    [ http://helpx.adobe.com/x-productkb/Global/Find-Serial-Number.html > I've lost my serial number >] view comments

    The last time Adobe suggests so too this activation https://helpx.adobe.com/contact.html?step=ZNA_downloading-installing-setting-up_licensing-.

    Hans-Günter

Maybe you are looking for

  • Later security customer HP 8.1 or version Manager

    receive the message "need to install customer HP security manager 8.1 or later before installing the Manager of device for hp protect where can I find tools.

  • M40 / driver problem

    I installed XP Pro - SP2 and driver general. Beginning in the trunk is a statement: PXE - E61: Media Test failure, check cablePXE M0F: Output of the PXE ROM I don't know where is the problem. I installed the display driver. Help! THX kcjones

  • Laptop restore

    I recently had my laptop cleaned remotely, like what happens on my cable company doing maintenance on the Internet. I had to restart my laptop. After rebooting when my screen came, I realized that I could not communicate with the agent who helped me,

  • Filter replacement need to reinstall Vista

    I lost my Vista basic disk original House and want to download ontu a USB to fix system error, because my other computer doesn't want to connect to my internet for Fast Link

  • Detect the status of calendar wireless sync...

    Hi all Is it possible to detect the State of wireless calendar synchronization, as active or disabled? Thank you