Question about infrared remote control on the Qosmio F30

Similar Questions

• Tecra 750: Question on the infrared remote control and TV

  Hello

  I wonder if anyone can help. I have an old Tecra 750 which I use as a sound system to play my MP3 collection. It has an infrared detector on it and I was wondering if it is possible to use this to receive a TV remote control IR, so I can use a remote control to navigate through my audio files. Does anyone know how or where I could find how? Y at - it a freeware to help maybe? Is it still possible?

  Thank you!

  Hello

  The computer uses infrared IRDA, and it is not compatible with the type of infra-red used by normal remote controls.

  You could get an external infrared remote control which must be plugged into the USB port.

• Is it possible to convert the T61 system so that it can use an infrared remote control?

  Is it possible to convert the T61 system so that it can use an infrared remote control?

  Canon and many other manufacturers of consumer electronics, provides instructions on the operation of the optional accessories in the manual of instructions for the accessory.  Manual user for the primary device will usually include a page that lists compatible accessories that are available for the device.

• Satellite P850 - question about infrared port

  Hello

  I have Windows 8 Pro installed on my laptop and I downloaded all the drivers and everything works well outside the infrared. I've looked everywhere on the internet and I can't find a remote to use with this laptop (especially on the Toshiba site).

  I installed the latest ENE CIR driver (v4.1) as well as the Manager of Toshiba remote (v3.1.0.1). I looked in Program Files to open the command handler Toshiba remote but when I click on the program to open... Nothing happens (including in the notification area).

  So my question is can I actually get a working remotely with this laptop at all, and if not then, what is this infrared port for because I don't find anything on my computer to actually use with/for?

  Thanks for your help: p

  Hello

  Some Satellite P850 models are equipped with the control distance and its possible to use the remote control with Windows Media Center to play discs or videos, see photos and watch recorded TV shows.

  Models who don t understand the a remote controller are * NOT * equipped with an infrared receiver for laptop cannot operate with a remote control.
  The remote was not part of the package for your portable computer does not support the infrared receiver and the Toshiba Remote Control Manager and ENE CIR driver installation was therefore unnecessary

• How to stop the remote control to the setting

  How to stop the remote control to the setting

  Disable the settings > general > accessibility > voiceover.

• I Don t see a button on the remote control to the top of the iTunes window

  I m trying to use the Remote app in my Apple Watch but I Don t see a button on the remote control to the top of the iTunes window to fit with my music library

  Hello

  The button on the remote control will appear in iTunes once you have tapped on the device to add within the Remote on Apple Watch app. Note that your computer and the watch must be connected to the same Wi - Fi network.

  In iTunes 12 and, later, the remote control button is located to the upper left, under the Volume slider. In iTunes 11 and earlier versions, the remote control is at the top right, under the search box.

  More information:

  Use Apple Watch as a remote for iTunes or Apple TV - Apple Support

• using the remote control of the DVD does not select the correct buttons?

  Hey Ya'll,

  Project is almost complete, but I ran into one, which I think is a very simple problem...

  On my main menu, I have a total of 5 buttons on 2 rows.

  Line 1 to 2 buttons and Row 2 has 3 buttons.

  The links are correct, because they work fine in preview mode, using the mouse, but also view the version on the pc using Cyberlink DVD Viewer, once again, using the mouse to select the button.

  The problem is when you use the remote control, either on the copy engraved in the DVD player, or in preview mode, if I use the directional buttons of remote controls, that he does not want to go to the buttons I suppose it must

  (Top row left to right, then down row from left to right)

  On each of the properties of the buttons Panel, I chose the right (I guess) option number (just below name) for each button... IE top left set the right value top of page 1, 2, bottom left 3, the middle value 4 downstairs and down to the right the value 5.

  Type is set to Normal, the button name and Synch text is checked (although the No button is real, each is just a Word text, in photoshop, when I did originally the menu..)

  Also the low middle button never gets selected with the remote control of the DVD... Preview, using the buttons on the remote control, he finally gets selected, but it takes a bit of comes and goes, and the highlighted button is rarely what you would expect, since direction button your pushing.

  #1 button (top left) is set to the default button, which I want, but do not know how I set that, unless it's because it was the first button, I myself made/converted to the button)

  Here, any help would be greatly appreciated... that should finish this project!

  CB

  Cowboy Bob,

  No, what you did with the binder is actually linking these buttons to the assets.

  It shows a Menu with several buttons, icon manually road buttons depressed. Once you choose manually the buttons of road, they can change exactly what will make the remote control.

  

  As said, when you create a Menu, buttons start at # 1 and progress upward. Each Layer Set button plus up in the Layers Palette. This is the routing of the buttons Auto gets its information and it usually works. However, if you move the buttons around, removes some, etc., the en can get confused, manually their routing is the best way to go.

  Good luck and we hope this helps,

  Hunt

• Performance of Windows 64-bit on the Qosmio F30

  Any who tried 64-bit on the Qosmio F30 operating system and is there a difference in performance in comparison with the 32-bit version?

  Are you interested in performance only or perhaps you need 64-bit drivers?

• Installation of Linux on the Qosmio F30

  One has been able to install Linux on the Qosmio F30 117? I tried a few distro, but all have failed to install. I'd like to try Suse 10.2.

  Help please.

  Hello Piker

  Obviously you need RAID driver for installing the OS. If you please check this Linux section and you'll find plenty of topics of discussion how to install Linux on laptops Qosmio.

• Question about infrared on Qosmio G20

  Infrared remote works well but infrared inside on the front side of the machine is not working at all there at - it a driver for a Qosmio G20 to activate it? or is there a driver hiding in the machine, some were?

  Considers that Franklin.

  Hello

  According to the specs of your device IrDA is not available and cannot be used to transfer data. Please check the entry in Device Manager.

• Qosmio x 300-remote control and the console above the keyboard do not work

  Sorry for my bad English...

  I have a new Qosmio x 300-11 L and the problem is my remote control doesn t work. What can I make it work again? And the console above the keyboard doesn t too much work.
  Thanks for help

  Sascha

  Have you installed Windows yourself? Some drivers Toshiba important may be missing.

  Do you have XP or Vista?

• Qosmio F20-130: (infrared) remote control problem

  Hi guys,.

  got a little problem which I think I've seen on this forum before. My remote no longer works. Used to work properly. Now, with the laptop turned off and connected remotely, I can light up the lap top. However, it does nothing else. If I press a button, the red light on the remote flashes and the Red led on the receiver will Flash but nothing seems to happen.

  I checked in device manager and I have tried using another USB cable to connect the infra-red receiver. Any ideas on what could be the problem? There is no secret key which I pressed by accident is there which disables the remote control?

  Dave

  Hello

  I put t know if it helps but try to remove this command remotely in the Device Manager and unplugged the unit. After the new trial to restart to connect the remote control again.
  In addition, please check the batteries. I know the flesh of lights but nevertheless check.

• Question about the Qosmio F30-140 system memory

  I have a Qosmio F30-140 NB (to 667 MHz front side bus) and it has 1024 MB (533 MHz) DDR2 memory.
  If I want to increase the size of the memory, can I use DDR2 667 MHz for my NB type? and if this is true can I remove the type of DDR2 533 MHz or we as well as usef type of 667 MHz (no conflict).
  Please notify.

  THX

  Hello

  Surely, you can mix the modules. It will work because the 667 Mhz Module itself slower clock down to the FSB of the module installed in the system. So if you install another module of 667 Mhz, the frontsidebus must run at 667 Mhz Mhz and not at 533 Mhz. (I guess)

  But you can mix, which will not fail.

  Welcome them

• Questions about the Qosmio F30-141 and OS

  Hello!
  I intend to get laptop Qosmio F30-141, but after purchase I want to replace an operational system on Linux Fedora Core, and with she would like to know, if properly supported by the given operating system this model (supported wi - fi particularly interested), or recommend another model?

  Thank you

  The problem could be that the Toshiba does not support Linux drivers and you will have to search in internet and 3 third-party Web sites compatible and supported drivers!
  Besides computers laptop Toshiba supports several tools and utilities that enables the features of the laptop.
  I imagine that you will not be able to use these features as FN keys for example

• No requireed receiver remote control in Vista - Qosmio G30

  The G30 Vista versions do not need of the separate remote receiver, using the built-in IR receiver on the front panel.

  Update an Qosmio XP MCE to Vista simlilarly would not require the remote receiver separated, and it should be the Vista version of the remote control?

  Hello

  As far as I know the face before of the Qosmio G30-103 (it is a unit of XP MCE) for computer laptop, you'll find the windows of the infrared receiver and this sensor is able to receive signals from the remote control. BUT this is only supported using the Qosmio Player!
  For MCE, you will need the remote control receiver extra with a USB connector that usually comes with the laptop.

  Good bye