Question about multiple WITHOUT

Similar Questions

• Question about multiple accounts on a single Machine

  Hello

  I have a question about the ability of the creative cloud to be used with multiple users. If we have computers in a lab that are shared machines and each student must buy their own creative cloud for its use. How to set the connection and activation of the account of each student?

  I'm new to creative cloud as well as it has been my understanding as long as its operation...

  Although it is branded as cloud base, the software is downloaded and installed locally

  Students between their Code to activate the application they wish to use...

  This model works if the student is using the software on their own machines, but how does it work if several students with multiple accounts share the same computer?

  If we install the software on the machines for them, is it possible for students to simply enable and disable the software as they go or is this a model that simply does not work.

  Thanks for any help you can provide,

  Hello

  Ask want you many to contact Adobe support for help and information:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

• Question about multiple instances of Thunderbird running at the same time

  I read that when you start Thunderbird by clicking on its icon or the shortcut must only load once, even if you click on it several times. It should be just a window of TB. If I click on the shortcut/TB desktop icon, it behaves like that. I can click several times and that a single TB window will open and be active.

  However, if I run the 'quick launch' TB on my windows 8.1 (or no matter what windows) taskbar, I get mulitple TB windows to open, as much as I want. So if I click on TB icon in the quick launch once, I get a single instance of it. Twice, I get two, and etc. In the quick launch any program behaves like that. He starts programs with a single click and launch again and again.

  Only, I click it once and get an instance which is good and how it should be. But this behavior with the quick launch is ok? It must do this not with Thunderbird? Thank you.

  There is usually no advantage by running multiple instances of Thunderbird, unless specifically do you these race with different profiles. In practice, if they are allowed to use the same profile, the first Thunderbird should should acquire the profile and therefore block the others, although this may not become apparent until you try to salvage something, for example, a message, or to change certain settings.

  Your multiple Thunderbird work successfully? They all show the same mixture of accounts, folders and address books? Can all or part of them save and make changes?

  If this is the expected behavior, (i.e. some "typical" windows) I do not like; He does not play well with profile blocking and I think that lead to problems.

• Question about multiple addresses of peers on a box next to VCS

  If we set up a nearby area in a VCS to point to multiple IP addresses (peer 1, 2 peer, etc.), he will always try first to use peer 1, or alternating?

  We have a secondary path on a remote site with lower WAN bandwidth, so we want only direct calls to address IP 2 peers when Peer 1 is unreachable.

  Nick,

  Area of peers are sought after doing round robin, for example, if we have 2 peers in one area, then the first message will go to the first hand then the next witl message go to the second peer then back to the first peer. Thank you

  Caesar

• Question about multiple certificates on a SAA

  I have a 8.4 (3) ASA5540 running which has AC certificates and identity of installed godaddy.com, identification of the ASA for remote user VPN (are using the client anyconnect.)

  There is also a separate certificate server located inside the LAN, which is used for internal purposes.  All the client workstations have this internal server identity certificates.

  We would like to be able to continue to use existing godaddy CA/identity certificates to identify the ASA for customers, but we would like to use the internal CA server to identify customers when they start up the session for the SAA AnyConnect.

  Is this possible?  I've seen other assignments that you can have more than one green on an interface, but it's a little different - only cert must be used to identify the ASA.  The other is only to identify users.  ASA has allowed me to import the internal CA cert.

  If possible, can someone point me to an example config?

  Thank you

  -Mathew

  Hello Matthew,.

  Your statement is correct.

  You can have the GoDaddy certificate to identify the ASA for the customers, this certificate of identity is that you apply on the external interface.

  Then, you can have certificate from another CA (Certificate Authority), in your case and CA internal to identify customers with the SAA. You just need to install root certificates and intermediaries (as applicable) of this new CA in your ASA.

  The ASA will verify the identity of the customer against all CA certificates installed in it until there is a validation of the certificate or refuses the connection.

  You use certificate authentication in the tunnel used by your customers Anyconnect group:

  tunnel-group Anyconnect-group webvpn-attributes

  authentication certificate

  I hope this helps.

  Daniel Moreno

  VPN

• Question about multiple licenses Etester

  Hello
  
  We currently have a license for etester. We plan to buy additional licenses plus 3. Since etester has a calculation license (one license per PC). currently Etester allows me to store scripts in which the tool is installed. I would like to know how to use the scripts stored in different parts to be stored in a common location. Basically, I want the scripts to be stored in a common location and I should be able to pull up any script from any pc.
  
  Kindly let me know if this is possible.
  
  Thank you
  Kaim

  Get all products of OATS and modify the c:\windows\RSW. INI file. Add a new single line entry in the Installation"" section. The new line must be named "SharedDir.

  For example:

  [Install]
  SharedDir = Z:\OATSshare

• Questions about TV Tuner Satellite A500/040

  Hi all

  I'm new to the Tuner of TV analog digital hybrid and I'm sorry if my questions seem as stupid.

  I have two questions about the of digital TV Tuner analog integrated hybrid in the Notebook Toshiba Satellite A500/040. My understanding is that the TV tuner hybrid integrated able to decode TV signals high definition and their display on TV via its HDMI port. I wonder if I could watch TV shows on your laptop without connecting to a TV. If so, is the software needed? There are several USB TV tuners for desktops and laptops on the market, A500 hybrid TV tuner works differently these USB TV tuners?

  Thank you

  Young

  > I think I know that the TV tuner hybrid integrated able to decode TV signals high definition and their display on TV via its HDMI port.

  N ° this s tv tuner not a HD!
  It s a digital tuner that provides digital video signal 576i and not 1080i.

  Of course, you can use the HDMI port to connect the laptop to the LCD HDMI port but you will not get the quality video full HD as blueray for example.

  I found this Australian page from Toshiba:
  http://www.MyToshiba.com.au/products/notebooks/satellite/A500/psam3a-04000e

  You will find this passage short text:
  + With tuner TV built-in, you can even watch analog or digital TV everywhere where you travel, while the HDMI ports make connecting high definition on your TV screen and sound system. +

  You can also watch TV on mobile phones display! It's a key reason why the TV tuner built in ;)

• A few questions about Toshiab reocvery disk for Satellite P300-133

  Hello guys,.
  I had a few questions about unpleasant surprises of recovery:

  (* 1) * I just make recovery DVD using Toshiba Recovery Disk Creator and he asked initially for 2 DVDs - but when one has been done it does not require a second blank DVD. Is it possible all the Windows Vista system files to write on 1 DVD?

  (* 2) * if I could reinstall Windows Vista using recovery of HARD drive option (by pressing F8) without using the recovery DVD?

  (* 3) * HARD drive partitions that will be formatted (just system C: or C: and E :) using HARD drive recovery?

  (* 4) * what is DVD - Image of the hard drives or the installation of Vista recovery files?

  Its pretty bad idea to not include BONES on DVD when I paid for it.
  Thanks for all the Toshiba problems :(

  1. I think the recovery disk creator means 2 CDs. I also have a Portege M700 with Windows Vista and a DVD. I got it and after that, I have a clean install of Vista with all the drivers and tools of Toshiba. Nothing is missing.

  2. Yes, you can reinstall Vista using recovery of HARD drive option when you press F8 at startup. You don't need the recovery DVDs, but you should create a when your HARD drive get some errors or something else. If you need a new recovery DVDs, you paid for one.

  3 HARD drive and complete partitions will be formatted, so backup your data first on a DVD disk external DRIVE, USB stick or something else.
  After the reinstallation, you have factory settings.

  4. the recovery DVDs is an image of the HARD disk on the factory settings. If you perform a recovery, there are all the drivers and tools are already installed. Of course, on the disk are files of installations of Vista, but you can use this DVD on your Satellite P300. The disc cannot be used on another Satellite or on a PC.

  If you have any other questions, take a look in the user manual. There are a number in the formations of the recovery. It s in Chapter 3.

• A Question about debugging...

  Hi all

  I have a question about debugging - specific probes. Is it possible to link and save the values on a wire (with a probe) which is a loop for the loop counter (or even a secondary value)?

  When I'm debugging code to a state machine that I often more easy to wire to the top of the State and the value, I am interested in a cluster, and then use 'generation antenna' and a registry change to add this element to each loop. I could also do this by indexing just out of the loop too.

  Once execution completes etc that I can look at the table (either using an indicator or a problem) to see what has happened to the value to each State/loop. And often, I know exactly where my code was wrong.

  My question is: is there a way to do this using regular probes without having to build an array? So, for example, I probe a digital wire and get a table of responses rather than just the last value on the wire?

  Thank you

  Dave

  I found this nugget that does exactly what I want - it's a custom probe developed by Darren.

  This post on the Exchange of ideas gives to think it should be at least provided with the package LV either integrated in the dev environment. Well worth voting for!

• Just a quick question about the appearance of the cluster

  Hello, this is Matthew, just a quick question about the appearance of the cluster

  Is there anyway to rearrange the order of the elements? I know cutting automatic resizing, I could move the items by hand. But if I use the cluster somewhere else, I have to move the items again...

  What I want is of the order of "Mx My Mz Ax Ay Az Temp voltage CS".

  Is there a quicker way to deal with?

  THz so much!

  You can right-click the border of the cluster and choose "arrange control cluster...". "The user interface is not as intuitive as it could be, but it will allow you to reorder items. If you use the cluster in several places, you should make the cluster in a type definition and replace all current uses of the latter with the type definition, so that they all match. They will also update automatically when you make changes to the type definition. Otherwise, you could have a situation where you have multiple groups with the same data types, but with elements in a different order, and your data will be getting a new denominated, when wire you the whole clusters. The data will be in the same order, but given that the item labels are in a different order, you can't get the data you want, when ungroup you by name.

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• Ask questions about the HP Pavilion 14-V041TX Bluetooth

  Hello, sry for asking questions about simple things.

  How to activate bluetooth for laptop HP Pavlion 14-V041TX?

  Or how to bluetooth to detect other bluetooth devices?

  coz already try to use my smartphone, but cannot detect any bluetooth device or laptop.

  for what I know, I already install the driver for bluetooth.

  Maybe there's another driver, that I'm missing?

  Thank you.

  SRY for my bad English.

  HI @Ton1_qrenz ,

  Welcome to the HP Forums!

  It's a great place to find answers.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  No worries about your English.  I believe that I understand your question, and if not, you can specify if you must post back.

  I understand that you are unable to detect Bluetooth devices.

  Here is a document to help you with this company. There are links that it contains other documents that can also be of assistance.

  Understand and troubleshoot Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP)

  If the problem persists, try the following steps.

  Step 1. Go to Device Manager
  Step 2. Right click on "Bluetooth device" you want
  Step 3. Select "update driver software... »
  Step 4. Choose "Browse my computer for driver software".
  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
  Step 6. Select "Ports (COM & LPT)"
  Step 7. Select "Microsoft" to the list of "manufacturers".
  Step 8. Finally select "Standard series via a Bluetooth connection.

  If you are unable to connect to a Bluetooth device, try the following:

  Step 1. Search for 'Change device' in the start menu in Windows 8.
  Step 2. Click on where it says change device installation settings.
  Step 3. Select No, let me choose what to do option.
  Step 4. Check the automatically get the device app option
  Step 5. Click on save changes to save the settings that you select

  So, you can try this

  Step 1: Go to RUN (Windows Logo + R) and type "services.msc" and Enter
  Step 2: Now find 'Bluetooth Support Service' and double click it
  Step 3: Now click on the Log on tab and type "Local Service" without the quotes
  Step 4. Click on "account".
  Step 5: Now remove any authorization of passwords the password field blank
  Step 6: Below the upper left title should be a hyperlink 'Start' click

  You can also view tab management power and unchecked the box "Allow the computer to turn off this device to save power."

  If it is still not resolved, I suggest contacting HP support for further assistance.

  Please contact our technical support at the 800-474-6836. If you are outside the United States / Canada region, please click the link below to get help from your region number. Phone goes everywhere in the world

  Good luck!

• Technical questions about X 1 carbon Touch base

  Please forgive me, I'm still recovering after the shock and frustration generated by dealing with Lenovo Tech Support.

  I recently received my X 1 carbon Touch and I have tried to understand some - I think - fundamental questions.

  As you know, to win 8, Lenovo doesn't have a custom recovery solution / owner. However, there are a score of Lenovo recovery on the machine. I'm /assuming/ this, somehow, can be used through the default / built-in mechanisms of recovery Windows, but I want to know exactly how without necessarily experiencing myself with it.

  In addition, the computer seems to be equipped with a mechanism of alternative stand-by, fast recovery called Intel or something like that. It is enabled in the BIOS and apparently makes use of a hidden partition of ~ 8 GB on the SSD. However, I find no indication of this mechanism working. There are no settings that I could find in Windows. I changed the BIOS to 'Immediately' setting in order to test the functionality, but put the computer to sleep does not seem to generate behavior that is somehow different from regular sleep.

  In any case, I would like advice or information on my questions above. I understand works the thing of recovery fast in order to decide if I want to recover the partition or not. I would also like to know my options I should never need re - install the delivered factory OS without actually crossed the steps. I would also if someone could tell me the best way to get support from Lenovo.

  / * I called Lenovo technical support with these issues. The person sponsor and those to whom I then was sent to had no idea what I was talking about. They had difficulty understanding terms like partition, standby, sleep, resume, and even software/hardware and implementation. It was suggested that my computer may be Intel and Lenovo not... They seemed to really come from an age of the computer. I asked to speak with someone who would have some basics of the machine that Lenovo delivered to me. I find it reasonable. At that time, I was told to talk to a knowledgeable person, I have to pay a fee. Seriously?

  */

  elfstone,

  To find out how to work the various Windows recovery methods, please see this Microsoft Web site:

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  The sole purpose of the recovery partition is to work with the "All delete and reinstall Windows" function of Windows 8.  If you have specific questions about the factory recovery that you can't get items from Microsoft, let me know.

  Regarding the plan of hibernation from Intel, as you noted, it takes a partition dedicated to your SSD which cannot be used for other purposes.  The only parameter in Windows is inside the application of arrangements of Lenovo in the power section.  Lenovo calls this function "in waiting for 30 days.  The only thing you can do is it turn on or off.  Here's how works "waiting for 30 days:

  1. When you close the lid, or otherwise put the system into standby mode, the system of standby for 3 hours.

  03:02 hours, the system will wake up and check things like not attached AC, wake-on-LAN not activated, USB device not attached, etc..  If conditions permit, the system will enter wakefulness of 30 days for example deep sleep.  If the system returns in normal mode to 'sleep'.

  3. deep sleep means that the content of the memory is written on the special hibernation on the SSD partition.  It is very similar to the traditional hibernation except what happens faster using methods of BIOS instead of Windows methods.  But this isn't anywhere near as fast as normal sleep/recovery.

  4. the system out of deep sleep when the cover is opened or when you press the power button.

  You have found the BIOS settings, but in fact they are ignored when Lenovo settings (and package of dependence of the Lenovo parameters) are installed on the system.  I don't really know why this design choice has been made.

  Personally, I don't see value in 30 days standby, not enough value to want to give up my expensive SSD 8 GB.  I exclusively use sleep/recovery.  The battery will last several days.  And if I'm going to be away from the computer for a long time, then I'll just stop it.

• Questions about apps headless

  Hello

  I have questions about the apps without head:

  -It is possible to run or end "game without head" of the apps 'part of the UI "?

  -When headless app is running, the part "headless" have opportunities to perform automatically the part "user interface"?

  -It is possible for "headless" to use geolocation and the sound?

  In advance, thank you for your answers.

  -It is possible to run or end "game without head" of the apps 'part of the UI "?

  Yes

  -When headless app is running, the part "headless" have opportunities to perform automatically the part "user interface"?

  Yes, being the easiest invocation

  -It is possible for "headless" to use geolocation and the sound?

  Yes

• Windows 7 starts questions about mac and office 2010 following an installation

  It's a long cut as short as vent. I've been miss sold a record of upgrade of windows 8 full disk-shaped, with norton and office 2010. My goal of creating windows on my mac for a course I'm taking. After that know I need windows 7, I bought it online. I created a partition of 80g on my mac charge windows 7, then norton. Until I loaded the office that I was invited to perform the update from apple in the windows software 7. Note before I installed norton, I load boot camp mac utilities according to the instructions. So, followed by all as should be. The prompt update from apple was quick time, iTunes and airport, I checked all and then updated. Then I loaded office 2010 and obtained throughout the process from the Microsoft site. On the last part of the installation, the installation failed due to a mistake of hanging iTunes. I tried again and again, I fixed the update to iTunes to add and remove the section of windows. Then, I got different errors. I decided to remove the whole score without uninstalling all programs again. When I get to the windows live, that this falls priming. I get various error messages whenever I try to start the process. As a header of Bank pool, fatal error and so on. Can anyone help? What is the damage?

  Hello

  Thanks for posting your query in Microsoft Community.

  Because the question is limited to Windows 7 on your Mac with Boot Camp, I suggest you contact Apple Boot Camp support for assistance.

  http://www.Apple.com/support/Bootcamp/

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.