Question about multiple addresses of peers on a box next to VCS
If we set up a nearby area in a VCS to point to multiple IP addresses (peer 1, 2 peer, etc.), he will always try first to use peer 1, or alternating?
We have a secondary path on a remote site with lower WAN bandwidth, so we want only direct calls to address IP 2 peers when Peer 1 is unreachable.
Nick,
Area of peers are sought after doing round robin, for example, if we have 2 peers in one area, then the first message will go to the first hand then the next witl message go to the second peer then back to the first peer. Thank you
Caesar
Tags: Cisco Support
Similar Questions
-
Question about multiple accounts on a single Machine
Hello
I have a question about the ability of the creative cloud to be used with multiple users. If we have computers in a lab that are shared machines and each student must buy their own creative cloud for its use. How to set the connection and activation of the account of each student?
I'm new to creative cloud as well as it has been my understanding as long as its operation...
Although it is branded as cloud base, the software is downloaded and installed locally
Students between their Code to activate the application they wish to use...
This model works if the student is using the software on their own machines, but how does it work if several students with multiple accounts share the same computer?
If we install the software on the machines for them, is it possible for students to simply enable and disable the software as they go or is this a model that simply does not work.
Thanks for any help you can provide,
Hello
Ask want you many to contact Adobe support for help and information:
* Be sure to stay connected with your Adobe ID before accessing the link above *.
-
Question about multiple instances of Thunderbird running at the same time
I read that when you start Thunderbird by clicking on its icon or the shortcut must only load once, even if you click on it several times. It should be just a window of TB. If I click on the shortcut/TB desktop icon, it behaves like that. I can click several times and that a single TB window will open and be active.
However, if I run the 'quick launch' TB on my windows 8.1 (or no matter what windows) taskbar, I get mulitple TB windows to open, as much as I want. So if I click on TB icon in the quick launch once, I get a single instance of it. Twice, I get two, and etc. In the quick launch any program behaves like that. He starts programs with a single click and launch again and again.
Only, I click it once and get an instance which is good and how it should be. But this behavior with the quick launch is ok? It must do this not with Thunderbird? Thank you.
There is usually no advantage by running multiple instances of Thunderbird, unless specifically do you these race with different profiles. In practice, if they are allowed to use the same profile, the first Thunderbird should should acquire the profile and therefore block the others, although this may not become apparent until you try to salvage something, for example, a message, or to change certain settings.
Your multiple Thunderbird work successfully? They all show the same mixture of accounts, folders and address books? Can all or part of them save and make changes?
If this is the expected behavior, (i.e. some "typical" windows) I do not like; He does not play well with profile blocking and I think that lead to problems.
-
Question about multiple certificates on a SAA
I have a 8.4 (3) ASA5540 running which has AC certificates and identity of installed godaddy.com, identification of the ASA for remote user VPN (are using the client anyconnect.)
There is also a separate certificate server located inside the LAN, which is used for internal purposes. All the client workstations have this internal server identity certificates.
We would like to be able to continue to use existing godaddy CA/identity certificates to identify the ASA for customers, but we would like to use the internal CA server to identify customers when they start up the session for the SAA AnyConnect.
Is this possible? I've seen other assignments that you can have more than one green on an interface, but it's a little different - only cert must be used to identify the ASA. The other is only to identify users. ASA has allowed me to import the internal CA cert.
If possible, can someone point me to an example config?
Thank you
-Mathew
Hello Matthew,.
Your statement is correct.
You can have the GoDaddy certificate to identify the ASA for the customers, this certificate of identity is that you apply on the external interface.
Then, you can have certificate from another CA (Certificate Authority), in your case and CA internal to identify customers with the SAA. You just need to install root certificates and intermediaries (as applicable) of this new CA in your ASA.
The ASA will verify the identity of the customer against all CA certificates installed in it until there is a validation of the certificate or refuses the connection.
You use certificate authentication in the tunnel used by your customers Anyconnect group:
tunnel-group Anyconnect-group webvpn-attributes
authentication certificate
I hope this helps.
Daniel Moreno
VPN
-
Question about multiple WITHOUT
We have an ESXi with a Dell MD3200i environment. It has two controllers with four network interfaces. They are configured according to best practices of Dell (NICs VLAN / separate subnets):
A-0: VLAN 200 (10.1.200.11)
A-1: VLAN 201 (10.1.201.11)
A-2: VLAN 202 (10.1.202.11)
A-3: VLAN 203 (10.1.203.11)
B-0: VLAN 200 (10.1.200.12)
B-1: VLAN 201 (10.1.201.12)
B-2: VLAN 202 (10.1.202.12)
B-3: VLAN 203 (10.1.203.12)
We acquired another SAN and I want to make it available on the ESXI server. This particular SAN has two controllers, each with two network interfaces. I was wondering if I could configure the network adapters to be on the same VLANS / subnets above, like this:
A-0: VLAN 200 (10.1.200.13)
A-1: VLAN 201 (10.1.201.13)
B-0: VLAN 200 (10.1.200.14)
B-1: VLAN 201 (10.1.201.14)
Do the above would cause problems with existing SAN iSCSI connections? (NMP round robin)
You can have several on the same iSCSI SAN VLAN / subnet, no problem here. This should not cause problems with the existing SAN as long as clearly, you don't try to interconnect them somehow, mix IPs or as vendors are committed to very basic layer 2/3 Networking Basics (i.e. not flooding the network with broadcasts or other), which should be taken for granted at this time.
-
Question about multiple licenses Etester
Hello
We currently have a license for etester. We plan to buy additional licenses plus 3. Since etester has a calculation license (one license per PC). currently Etester allows me to store scripts in which the tool is installed. I would like to know how to use the scripts stored in different parts to be stored in a common location. Basically, I want the scripts to be stored in a common location and I should be able to pull up any script from any pc.
Kindly let me know if this is possible.
Thank you
KaimGet all products of OATS and modify the c:\windows\RSW. INI file. Add a new single line entry in the Installation"" section. The new line must be named "SharedDir.
For example:
[Install]
SharedDir = Z:\OATSshare -
I have a question about Adobe TDC license on two devices.
I have a question about Adobe TDC license on two devices.
I want to use Adobe of the COMMON tariff on both devices.
and I heard that it is possible.
but I need an official document from Adobe.
You know this part please address the link or documents, please.
Thank you.
Best regards.
Hello
You can install and activate a license creative cloud on 2 computers, regardless of their operating system. But you must use one at a time, in other words you should not share your license with another user. A license is for a user that can be used in different places as the home and office. However, creative team of cloud subscription, you can have multiple licenses under a subscription that you can assign to users. You can consult the following links. Answer to your question is mentioned in the first link.
Licensing and terms of use | Adobe
You can also check the following links for creative team of cloud and management licenses
Creative cloud for teams. Adobe Creative Cloud for businesses
Manage your cloud of Adobe Creative for the composition of teams
-
send e-mails to multiple addresses
Hi guys,.
a question about the APEX_MAIL package. Has anyone tried to send e-mails to multiple addresses by using the p_cc parameter? I found a description how to do this, but it does not work when the addresses are stored in the variables:
As it's works, but if I want to add another address to p_cc (stored in a variable), it no longer works.p_cc: Valid email addresses to which the email is copied. For multiple email addresses, use a comma-separated list
Does anyone know the correct syntax to add a second receiver stored in a variable?l_id := HTMLDB_MAIL.SEND( p_to => receiver, p_cc => receiver2,___________, p_from => sender, p_subj => subject, p_body => body, p_body_html => body_html);
Thank you for your time and help!
Concerning
PatrickPatrick,
Using your code as the base and making the following assumptions:
1 ' receiver' and "receiver2" are hard-coded electronic addresses
2. the name of the variable is l_cc02Try the following:
l_id := HTMLDB_MAIL.SEND( p_to => '[email protected]', p_cc => '[email protected],' || l_cc02, p_from => sender, p_subj => subject, p_body => body, p_body_html => body_html);
Note the comma at the end of the 'other' email address.
Kind regards
Danhttp://danielmcghan.us
http://sourceforge.NET/projects/tapigen
http://sourceforge.NET/projects/plrecur -
Just a quick question about the appearance of the cluster
Hello, this is Matthew, just a quick question about the appearance of the cluster
Is there anyway to rearrange the order of the elements? I know cutting automatic resizing, I could move the items by hand. But if I use the cluster somewhere else, I have to move the items again...
What I want is of the order of "Mx My Mz Ax Ay Az Temp voltage CS".
Is there a quicker way to deal with?
THz so much!
You can right-click the border of the cluster and choose "arrange control cluster...". "The user interface is not as intuitive as it could be, but it will allow you to reorder items. If you use the cluster in several places, you should make the cluster in a type definition and replace all current uses of the latter with the type definition, so that they all match. They will also update automatically when you make changes to the type definition. Otherwise, you could have a situation where you have multiple groups with the same data types, but with elements in a different order, and your data will be getting a new denominated, when wire you the whole clusters. The data will be in the same order, but given that the item labels are in a different order, you can't get the data you want, when ungroup you by name.
-
Windows Live ID problem
Hello world.
I have a small problem regarding the Windows Live account. My account is: * e-mail address is removed from the privacy *, I forgot my password.I need to answer the questions about my "ID". I don't know the answers that I've tried over and over again and I even tried to make security issues and I could not answer.What can I do?Hello RobertKristof,
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.
-
My "Sweep" block future messages Hotmail is maxed out at about 500 addresses. Blocked addresses can be developed? I get over 100 emails a day I want to block forever.
Hello
Answers is a peer group supported and unfortunately has no real influence on Hotmail.
HotMail has its own Forums, so you can ask your questions there.
Windows Live Solution Center - HotMail - HotMail Forums Solutions
http://windowslivehelp.com/Hotmail - Forums
http://windowslivehelp.com/forums.aspx?ProductID=1Hotmail - Solutions
http://windowslivehelp.com/solutions.aspx?ProductID=1How to contact Windows Live Hotmail Support
http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htmWindows Live Hotmail Top issues and Support information
http://support.Microsoft.com/kb/316659/en-usCompromised account - access unauthorized account - how to recover your account
http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41Hotmail hacked? Take these steps
http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Cannot send to multiple addresses with outlook express
Cannot send to multiple addresses with outlook express
Hello
even if you weren't too fourth to come up with more details on this issue, guide for the question on Outlook express here.
If you have more specific questions, please include more details.
http://support.Microsoft.com/kb/835830
B Eddie -
2 questions about mcupdate.exe
Use Vista Home Premium 32-bit with SP2 of Vista on HP desk top of page
2 questions about mcupdate.exe
1. what is? When I google it I get's things on McAfee. I have McAfee and never had McAfee. The information google seems to indicate that it could be a virus. However, I see the following
-It seems to be in the ehome on my computer folder
-It seems it works twice a day and every time it turns my internet connection log shows the connection to a microsoft ip address for 'download tv' or something like, think if it is not not a virus
2 seems that it does not always work. I'll get these connections every day, twice a day for a few weeks or more, then get not every day.
Currently I seem to not get any activity, just after the silver light updated 01/09/10. I do not use the TV feature on my computer, but I was wondering what it is and why it works sometimes
Hello
The link works here even if it could be glitch or malware, if you can access a Microsoft site. Try
Yet once, and if no joy don't try to see if you can reach http://www.microsoft.comThe 2nd link describes the file unless it has been replaced by malware here is information.
Would that be a normal update. -
Questions about the Windows Feedback program Fullfillment
When will I know if my fullfillment of windows feedback program is over, that I have installed on my PC?
Hello mpic16,
If you have questions about the Windows feedback program, you will need to respond here.
https://WFP.Microsoft.com/welcome.aspxYou can send an email to: * e-mail address is removed from the privacy *.
They would be better able to answer your questions and concerns.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Question about the issue of the Double NAT...
Hah I posted for a little. I have a question about Double NAT. Is it wise to launch? Reason why is that I have a WRT54G v6 router and the Zoom ADSL X 4 Modem/Router/gateway and it seems that sites take just a little more time to respond to Web sites. I just want to know I have to turn off (i.e., go in with my router bridge Mode) or what. Or leave it alone. Now one last thing: that the problem of slow could actually be AT & T but I have the feeling that this isn't.
What configuration options you have on the Zyxel to fill? What have you tried exactly?
The basis for the first option is:
* Bridged Zyxel.
* Linksys configured for PPPoE with your user name and password for the internet connection.
Instructions to fill the Zyxel are here or here depending on the exact model of Zyxel.
The second option is:
* Zyxel doing business as the router. I assume here that the Zyxel is on 10.0.0.2 with a subnet mask 255.255.255.0.
Unplug the Linksys to the Zyxel. Connect a computer to the Linksys. Open the web interface of the WRT to http://192.168.1.1/
On the main Setup page:
1. change the LAN IP of 192.168.1.1 address 10.0.0.1.
2 disable the DHCP server.
3. save the settings. You will lose the connection. Unplug the computer.
4. wire one of the numbered LAN ports of the Linksys for the Zyxel. Do not use the internet port of Linksys!
Now you should be able to open the Linksys web interface to http://10.0.0.1/ all devices connected wireless of Linksys or connected to one of the three LAN ports must have a connection to the internet via the Zyxel.
Maybe you are looking for
-
Process creates the CPU to overheat and the Fans to run like crazy:
I am ripping DVDs on different Macbook cradle fully aware that it's requiring treatment. The 2011 with 16 GB of ram and hard disk SSD, the process runs on 330% of the processor, blasting the ability and heat revolves around 100 c/213 F. Interesting e
-
I read on the various Add ons of pages of privacy Firefox and decided to buy the Uniblue speed up my computer. When I called their number to be activated, I had someone telling me that there are many serious problems detected after checking my comput
-
How to disable notification of update of pacifier?
I don't want to upgrade to lollipop but I get notifications of update that makes it nearly impossible to use the unit normally how to disable you fullscreen?
-
I recently bought a JK701H Lumonics, a yag laser an old, later I read on the net that it is outdated technology, but still many seller sell even at a very high cost. Can some counsel where YAG lasers these are always used and reason.
-
Original title: Wireless mobile mouse 6000 will not work on XP but when I bought it iwas sure it worked with Windows 7 and Windows XP.I bought a mobile wireless mouse from microsoft for more than a year for use on windows 7. When I bought it, I thoug