Question about new design java GUI tools

Similar Questions

• Questions about new HA in vsphere features 5

  Hello!

  I have a few questions about new ha features in vsphere 5

  I found, there is a master ha in the cluster that monitors other hosts and protected virtual machines through two type of heartbeats (network and data store) and move the VMS if necessary. If this host fails, an election is held and new master ha is determined by vcenter server.

  Ok! What happens if we install vCenter Server as a virtual machine inside the host who is the master ha in a cluster. If this host fails (something like a power cut) its agent goes too far and also the vcenter is destroyed. So, who's going to hold the election and introduce the new ha so that the old ha and vCenter are out of the game.

  I know that ha staff are not entirely dependent on vCenter and runs if the host taking vcenter is far (restart vms including vcenter or moved to another host on another) but I think this one is different because of the new role of master

  My next question is on the different types of events, which can arrive at the slave of the hosts and do their partitioned or isolation. I'll ask them later (once this question is answered

  Thanks to you all

  you mean master election (who needs to know the host object id in the cluster and the number of data warehouses connected and...) is performed by agents themselves? and he needs no intervention vcenter?

  No fix - no intervention from vCenter for an election of master.

  and another thing. When the host with vCenter machine on it and the role of chess master, how other officers find that the master is absent? is not the work of vcenter to notice and say to others when master does not work?

  Is not work of vCenter - is the work of the master and the process of hearbeating among the slaves.

  what I doubt is that: If slave hosts loose connectivity with the master, they think that they are faulty and should present themselves as isolated or partitioned and it is the duty of the vcenter to know when the captain does not work! can you please correct me here

  See above - is not vCenter work to determine which node is failed or isolated - it's the work of agents FDM.

  
  

  You should read the book of Duncan: http://www.amazon.com/dp/B005C1SARM/ref=as_li_tf_til?tag=yellowbricks-20&camp=0&creative=0&linkCode=as1&creativeASIN=B005C1SARM&adid=16Q69JRGDTX1DHPRKTQM
  

  
  

  It covers all this in depth.

• Simplistic questions about game design student

  Hello

  A high school student sent me a few questions about the design of the game.  After above, they seem to be more applicable to commercial game developers.  If you are such a person would be willing to post your answers, I would be grateful.

  Here are the questions:

  1.) how long does it take to design a video game?

  (2.) what is your source of inspiration to design a video game?

  3.) how to make a video game to become popular? (sold in a package)

  4.) what are the resources needed to design a video game?

  5.) how much money does take to design a video game?

  Best regards

  Chris McLaughlin

  I have programmed buggoop 300, http://www.buggoop.com/BugGoop300/

  and I'm currently adapting mobile android.

  I also programmed this, http://rummoli.ca/bin-debug/rummoli_single.swf

• Two questions about new Portege R700

  Hi all

  I brought a R7001F7 a few days earlier, there are a few question I hope some of you could help.

  1. the base of the laptop is not level (balanced) and oscillates to right, the rubber foot doesn't seem to be the culprit, don't know if it's badly formed chassis...

  2. the memory status shows 4 GB of available but only 2 GB usable, the speed is rather disappointed, is there a way to improve this? I miss some settings? because it is expected to reach the maximum of 4 GB...

  Did anyone of you met the above question? Since I just brought it, do you think I will return the machine or contact the security team? The problem is, I noticed these question, I am already registered in the machine on the warranty, don't know if I can still get a refund... However, I already transfer all my files system... This is why I would be very grateful if someone could give me some advice here.

  Thank you

  DLO

  Hello

  In General, you should contact the nearest Toshiba service provider and ask for help. They know how to act in such situations, especially about Visual problems.

  Can you please tell us what R700 you exactly (R700-xxx). Is 32-bit win7 preinstalled on your laptop?
  More on the use of the RAM on 32 bit OS you can read here - http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm

  What about the speed of the laptop or the performance in general? It doesn t depend on RAM only. It is very important that the preinstalled OS is properly configured. Original recovery image that you got with your laptop contains many tools and utilities that run in the background and reduce s for laptop performance.

  I recommend checking the applications running (start > run > msconfig > startup) and disable all unnecessary and utility tools. What makes the slow OS is tempro and preinstalled anti-virus software.

  Check it out.

• Question about the design of conditional text

  Posted in the wrong forum, post again here.

  I have a relatively important book (230 pages) with dozens of tables and 100 graphics. I need 4 versions of this book. One for each grade level (3) and the other if happy for all 3 grades is sold as a "master class".  Other than the implementation of conditional text, the book is ready to go. I tried two different ways to approach the tables under certain conditions (some of which are within blocks of text, some just anchored to a page) but I do not quite understand.  Application of conditional text tags (with different colors and markers for each) seems to crash (i.e. almost duplicatable unlike the grave 'normal' down 3-4 I feel daily last month that are just randomly). Sidenote: I was very happy to see that they will solve the crash of book printing...

  Reference markers are involved in these conditional sections, and I have my suspicions that they are guilty of the root of my other problems of crash, but then FM crashed when applying conditional text to a section that * don't * have a x - ref, so I don't know what to think.

  I need to get out Monday. So my question is, if I need 4 tables in one page (one for each version) I better just do 4 copies of the book and the compilation of this way? I sold the customer on FM mainly due to the ability to compile several book of basic documents... so, I really hate to have 4 copies when I give the source. I know that you can select rows in a table for a version (so I could do a very large table for 3 versions and simply choose different lines), but this is one thing that seems almost certain to make it crash as well.  And the paintings of masters have an extra column, but also a line so I still need 2 tables by doc so I could get the conditional statements to stop crashing. Is there a better way to 'design', which could suggest an experienced FMer? Some custom utility which works even if it isn't free?

  Just in case someone asks:

  The system configuration

  FM 11

  new facility in August, not upgraded

  All the files are originally from FM11 and new

  Windows 7-64 bit

  20 GB of memory

  2 TB - local disc c /.

  Thanks for your suggestions on this.

  Well, it didn't crashed this morning when I put the x back references in the conditional table. Sent to fmerror with the steps for dupe.

  But on the mif wash. I've done it "manually" once a week now for the last two weeks. Can't say if it is to help, but it is always recommended, so I do. However, I was wondering if anyone had a recursive script that would do this automagically...

  Thank you

  Laurie

  Edit:

  Search mif washing (and variants) and nothing gets on the Adobe site. I figured out through a vague reference to an old thread where to find it and thought that I note for new users: If there is...

  Book MIF Wash is that a utility provided by Adobe that recursively traverses all the files in your book, opens, writes the .mif file then re-recorded this file to your FM - washing apparently file everything watered in your FM file. Manually, this process takes forever. And even if you see frequent references to: did you do a mifwash yet? "when someone has a problem, there is no documentation on what I found.

  It is a "sample" allowing Adobe script.

  Go whenever you have installed FrameMaker and navigate to the BookMIFWash folder or browse to the file BookComponentMIFWash.dll, which in my case was to C:\Program Files (x 86) \Adobe\AdobeFrameMaker11\Samples\ScriptsAndUtilities\BookMIFWash.

  Copy the file BookComponentMIFWash.dll in C:\Program Files (x 86) \Adobe\AdobeFrameMaker11\fminit.

  Restart the console.

  Then you will see that nothing has changed.  ;-)

  You must select the book with your mouse in the Document window, and then the menu item utilities book "dynamically" appears. Down there, you will find some MIF Wash book.

  I always pay attention to the warning to make sure that I have a copy of the entire project before running it. :-)

  Hope this helps someone else.

• Satellite X 200 - 21 K - Question about installing the Toshiba drivers & tools

  Hello

  That's what I want to do, so... Please help!

  I just buy new notebook TOSHIBA SATELLITE X 200-21 K, and I want to format it, and... to install Windows Vista Ultimate (not Windows Vista Home Premium product Recovery DVD-ROM).

  I downloaded all the drivers from...

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  ... but I can't find the "Instructions of Installation' to download anywhere, so I can install it in the right order, unless... If 'Please click here to download textbooks.' is 'Instructions of Installation', if not... Please... where I can download the appropriate instructions!

  So... after I format and install new Vista Ultimate, I won't have... TOSHIBA original tools that came with the recovery DVD-ROM products, can I actually loose something with it, like... soft Web Cam help TOSHIBA TOSHIBA zooming Utility or or Protector Suite QL... and so on... I can go without it?

  Can I install or download just this sweet, once I installed Vista Ultimat, maybe product Recovery DVD - ROM, but how?

  Is it just the version of Windows Vista Home Premium that come
  with this product Recovery DVD-ROM or... all versions of Vista comes in this DVD, and you can choose which version you want to install?

  I hope someone will help me with my 'problem '!

  Thank you very much!

  Best regards

  It is a good idea SSI23. The update should functions too.

  Regarding the Toshiba drivers on the Toshiba page;
  Well, on the page, you will find the common drivers and utilities you won't find 3rd party software characters, which is part of the image of Toshiba. These software are found only on the image of Toshiba (recovery CD).

  Good bye

• Satellite C660-1F1 - Question about newer drivers and the speed of the memory

  Some of the drivers for this laptop are outdated compared to the most recent drivers on peripheral manufacters website. Is it safe to use these new drivers or is it recommended to stick with the old drivers that are on the Toshiba site?

  And second question: is it possible to make the fastest possible working memory supported? Don t BIOS options include options for the parameters of memory. Why the memory is running as low mhz in case of default? CPU - Z shows that the current frequency of dram is 532, 2 mhz. What is the maximum, it is at 667 mhz? Probably she can´t be 1 066 MHz as promised in the specs?

  Hi cryogenized,.

  > Some of the drivers for this laptop are outdated compared to the most recent drivers on peripheral manufacters website. Is it safe to use these new drivers or is it recommended to stick with the old drivers that are on the Toshiba site?
  Why you want to update your drivers? Do you expect a gain of performance with newer drivers?

  Way General, with official Toshiba drivers you are on the safe side because they are pre-tested. If you can make sure that they work properly and don t cause property damage. Install the other drivers happens on your own risk!

  > And second question: is it possible to make the fastest possible working memory supported? Don t BIOS options include options for the parameters of memory. Why the memory is running as low mhz in case of default? CPU - Z shows that the current frequency of dram is 532, 2 mhz. What is the maximum, it is at 667 mhz? Probably she can´t be 1 066 MHz as promised in the specs?
  The laptop is equipped with modules of DDR3 1066 MHz and the RAM speed is dependent on the FSB of the processor. If your CPU is throttling down, RAM modules will work also on low speed. On a high utilization of the processor (100%) the RAM modules must run with speed of 1066 MHz I think.

• Question about new BIOS on Satellite L20 182

  HI :)

  I have a question: can I install new BIOS 2.20 on my Satellite L20 182 model No. PSL2XE?
  If I can't, why PSL2X users do this? Are there differences in the two models?

  Hello and sorry for my English - I'n not the best :)

  Hello

  just for explanation: the bios you mentioned is good the machine bios. Toshiba is not writing the complete model number since there is a range of numbers of the same model, Don t so you need not worry, they are not different. Maybe the last digit, but it is not important to you.
  Why am I knowing this? Because many manufacturers are doing this and I've been several times confused when updating the BIOS from another manufacturer...

  Welcome them

• Question about new wireless mouse:

  Got a Mobile Mouse Wireless 4000 for Christmas.

  I went through the installation process.

  The mouse seems very 'jerky' or 'jumpy' - do not know how else to describe it.

  What setting change to fix this?  TIA.

  Hello

  Have you installed the latest version of IntelliPoint for the new mouse?

  Microsoft Hardware - downloads
  http://www.Microsoft.com/hardware/en-us/downloads

  There might be a problem with the mouse - it solve problems you can and if necessary contact
  supported.

  Wireless Mobile Mouse 4000 - has a 3 year warranty
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=013&active_tab=systemRequirements

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  These mice are delivered with 90 tech support of day of the 1st incident that was about to begin when
  contact Microsoft at the number below.

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 for MS Hardware.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Envy 17: Questions about New 17 "computers laptops Envy with 6th Gen Skylake processors

  I see the new Skylake i7 CPU showed in the line of envy (I waited for my purchase), but he has very little information provided on the HP site and what's next is some confussion. I mean, I'm looking at a $2,000 laptop - a little information on the sales page would be nice!

  There are 2 17 '' want options (not the best value) that are customizable - display a touch and the other not.

  No touch lists a 256GB SSD option, and 1 TB spinner - touch lists a SSD 512 GB or double spinners.

  Basically, I can assume there are 2-Bay 2.5 "as previous models of envy, but what is the SSD? It is a 2.5 "SATA? What is M2? Is - this mSATA? If it's M2 or mSATA is on the lower part of the Board of Directors and easily replaceable?

  Which in the end line want is a bunch of fo SSD 512 GB (or 1 TB) and a cone of 1 TB for storage and available configs don't happen. Can I do it myself?

  Well, I guess I answered my own question...

  (manual for the 2015 Envy 17 is located @ http://h10032.www1.hp.com/ctg/Manual/c04696907)

  The manual shows a connection for the SSD with two m2 2 2.5 "bays. For those who wish to have a second (or third) car related parts appear to be:

  Hard drive cable 813795-001 (not shown)

  Kit (not shown) hardware hard drive 813796-001

• A few questions about the design of Data Guard

  Hi, I have a few basic questions around design Data Guard

  Q1. Looking at the instructions of Oracle for the creation of a logical standby, he recommends first creating a physical standby and then convert waiting logic. However, I thought that a logical standby might have a totally different physical structure of the primary. How can this be the case if a logical standby first starts his life pending physical (where the structure must be the same)?

  Q2. It is a normal practice to back up your database before as well - if yes why?

  Q3. Can RMAN back up a database of the day before while he is in the State mounted (rather than opening it)?

  Q4. What is the point of cascade redo apply rather than just get the primary ship to each standby?

  I guess you could try to reduce the latency of node to node if some the day before were quite remote from the primary

  Q5. Is it possible to convert a physical logical Standby?

  Q6. What number best of Standby, you can have - Oracle suggests 30 but I thought I remember reading somewhere regarding the 11 GR 2, that this limit has now been increased?

  Thank you

  Jim

  Hello again;

  "begins each logical waiting first her life on hold physical?"

  Its the only way I ever did. I think it is the simple way to do it.  By the presence of a physical standby first you have already confirmed the network and most of the settings for Data Guard so that you can focus on only the logic of the standby database configuration.

  Chapter 3 of this book, it's easy:

  http://www.Visi.com/~mseberg/data_guard/new_dg_book.html

  Best regards

  mseberg

• Question about new Mac client

  We went just to view 4.5. We had the 'AllowDirectRDP' option located in the political ad group to refuse direct RDP sessions in view 4.0, for extra security. Now that the Mac has a 'real' customer and may not use the web portal, one of our users is more able to enter his office. He receives an "Access denied" message, which origin of this group policy setting. I see in http://code.google.com/p/vmware-view-open-client/issues/detail?id=81 it seems that this option must be enabled for the Mac to connect with the new client. Anyone know if he's going to be a difficulty for us to stop direct RDP back again and have the Mac client still works? It's a precaution extra security for us, and now allow Mac users to get to drop this option, and I would get back eventually.

  Well, I don't know about whether or not the issue of the DRC itself will be fixed. I believe that the plans are to add support of PCoIP to the Mac now customer who will actually remove the need for this GPO.

  I can't say with certainty that these details have not yet been confirmed. Sorry I can't be more helpful!

  -Mike

• Question about new sequence

  My question is this. What can I do my sequence when I first pull up from PP. My video is stored in mpeg-2 (.mpg)

  PLEASE NOTE that the PPro CS6 screen may be a little different

  For CS5 and later versions, the easy way to ensure that your video and your project

  See 2nd post for the photo of a NEW ELEMENT of process http://forums.adobe.com/thread/872666

• Philosophical question about the design of the table

  I'm new in the world of RDBMS. I read a lot but have little practical experience. I'm upgrading of old applications that I know well. I'm interested in advice/opinions on a number of issues, from it.
  
  My application periodically (at the discretion of the user, so can be daily, weekly or monthly) should take a snapshot of some data. This snapshot is then used for various activities, such as a control point of reconciliation with external clients - so it must be 'frozen' rather than be derived at a later date. But if the snapshot proved to be a mistake, I can possibly be rerun (crushed) - requiring all lines to delete everything first.
  
  Data must be accessible in different ways, everything would need the date of snapshot to be part of the index or a group of clauses.
  
  Snapshots can be copied or replicated to other servers for purposes to relieve the burden of filing database. Old clichés may be archived, ignored backups of routine, deleted and so on.
  
  Is there a case for the inclusion of the date of snapshot as part of the name of the table? It would simplify the index structures, reduce the size of the individual table, perhaps to improve the competition (for users who access an old cliché while another is being created), facilitate separate archiving and much easier to drop and create table to remove all the lines before a replay. Of course, it reduces the size of the table that could potentially become very large.
  
  However, the previous snapshot is used as a starting point for the following, or a subsequent repeat) you need to be able to quickly determine who is the nearest date start - easy if they are all in 1 table, can be more load trying to determine is whether a specific table at the time to a given date.
  
  I look forward to some expert advice. :)
  CS

  user8821725 wrote:

  Is there a case for the inclusion of the date of snapshot as part of the name of the table?

  No--not from a point of view of the data modeling. The snapshot date is an attribute. Attributes are not incorporated in the name of the entity being modeled.

  However, you can decide to implement the instant entity tabular instant daily - but the attribute date (column) will always be an attribute. In other words, you must not remove the attribute date as a table column as the table name now.

  This decision (implemented as a multi table entity) have meaning when not having is not a better way to manage the physical aspects of the table. Partitioning for example would be a much better option to use - a single partitioned table, containing multiple partitions, where a partition physically contains data for a specific instant day (including the index).

  Basically, there is a very clear line between the logical data modeling and the material realization of this model. Oracle provides a bunch of features that you can use on the side of the material realization. As index organized tables. Table of clusters, partitioning and so on. But how you implement the physical model does not dictate the design of the logic model.

  However, the previous snapshot is used as a starting point for the following, or a subsequent repeat) you need to be able to quickly determine who is the nearest date start - easy if they are all in 1 table, can be more load trying to determine is whether a specific table at the time to a given date.

  I would use a management entity - that describes the metadata for a snapshot. As when it was created, the filter criteria used, the time it took (still useful for performance and troubleshooting purposes), be it an an active/valid capture instant or not - or any other attributes necessarily to manage this logical snapshot as a set of data.

  The biggest problem with a physical model that uses separate physical tables for the same entity, it is appropriate to use table name must be determined at run time. This means dynamic SQL. Dynamic SQL means an increase in complexity, open any SQL injection holes, having to deal with errors which would not intervene with static SQL, etc.

  If this approach to your data model's physical implementation needs a review carefully to ensure that it works as efficiently and effectively as required.

• Equium A100 PSAAQ: Question about new update of the package of added value

  Equium A100 (PSAAQ) has received value-added information package download from toshiba, downloaded successfully, 3 provided separate files, zip files don't know which use as for the two buttons six buttons or without button machines, the question is which buttons do they refer to? so I know which file is correct for my machine, help please.

  Hi Andrew

  You should check this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25055

  It s on the same theme